Remove the silly redefines of pr_err/info/debug.
This improves readability and it also gets rid of a bunch of warnings when
compiling this driver for older kernels using the compatibility media_build
system.
Signed-off-by: Hans Verkuil hans.verk...@cisco.com
---
Hi,
On 05/22/2013 04:05 PM, Patrice Levesque wrote:
I could try the liquorix kernel (3.8) if you thought it might help.
Yes, if you could try that that would be great.
If I may join the party, I too own an InstantFM USB device and I can't
get it to play radio. All of this under kernel
Hi Ben, David,
The go7007 staging driver has been substantially overhauled for kernel 3.10.
As part of that process the firmware situation has been improved as well.
While Micronas allowed the firmware to be redistributed, it was never made
part of linux-firmware. Only the firmwares for the
On Tue 14 May 2013 06:44:19 Jeff Hansen wrote:
All of the firmwares I've tested, including 0x1e, will inevitably crash
before recording for even 10 minutes. There must be a race condition of
IR RX vs. video-encoding in the firmware, because if you disable IR receiver
polling, then the firmware
On Wed 15 May 2013 13:57:16 Lad Prabhakar wrote:
From: Lad, Prabhakar prabhakar.cse...@gmail.com
This patch series enables the ths7303 driver for asynchronous probing, OF
support with some cleanup patches.
Lad, Prabhakar (6):
media: i2c: ths7303: remove init_enable option from pdata
Hi Hans,
On Thu, May 23, 2013 at 2:21 PM, Hans Verkuil hverk...@xs4all.nl wrote:
On Wed 15 May 2013 13:57:16 Lad Prabhakar wrote:
From: Lad, Prabhakar prabhakar.cse...@gmail.com
This patch series enables the ths7303 driver for asynchronous probing, OF
support with some cleanup patches.
Hi Sekhar,
On Wed, May 15, 2013 at 5:27 PM, Lad Prabhakar
prabhakar.cse...@gmail.com wrote:
From: Lad, Prabhakar prabhakar.cse...@gmail.com
remove init_enable from ths7303 pdata as it is no longer exists.
Can you please ack this patch, as this patch is intended to go via media tree.
Regards,
Op 22-05-13 19:24, Maarten Lankhorst schreef:
Hey,
Op 22-05-13 18:18, Peter Zijlstra schreef:
On Wed, May 22, 2013 at 01:18:14PM +0200, Maarten Lankhorst wrote:
Lacking the actual msg atm, I'm going to paste in here...
Thanks for taking the time to review.
Subject: [PATCH v3 2/3] mutex:
Hi Hans,
On Mon, May 13, 2013 at 11:34 AM, Prabhakar Lad
prabhakar.cse...@gmail.com wrote:
Hi Wei,
Thanks for the patch.
On Mon, May 13, 2013 at 11:27 AM, Wei Yongjun weiyj...@gmail.com wrote:
From: Wei Yongjun yongjun_...@trendmicro.com.cn
Fix to return -ENODEV in the subdevice register
On Tue 14 May 2013 12:45:32 Lad Prabhakar wrote:
From: Lad, Prabhakar prabhakar.cse...@gmail.com
This patch rearranges the header inclusion alphabetically
and also removes unnecessary includes.
As Laurent mentioned in a review for another patch (vpif) you probably
shouldn't remove these
Hi Hans,
On Mon, May 13, 2013 at 4:09 PM, Lad Prabhakar
prabhakar.cse...@gmail.com wrote:
From: Lad, Prabhakar prabhakar.cse...@gmail.com
from commit 3778d05036cc7ddd983ae2451da579af00acdac2
[media: davinci: kconfig: fix incorrect selects]
VIDEO_VPFE_CAPTURE was removed but there was a
On Thu 23 May 2013 11:25:25 Prabhakar Lad wrote:
Hi Hans,
On Mon, May 13, 2013 at 11:34 AM, Prabhakar Lad
prabhakar.cse...@gmail.com wrote:
Hi Wei,
Thanks for the patch.
On Mon, May 13, 2013 at 11:27 AM, Wei Yongjun weiyj...@gmail.com wrote:
From: Wei Yongjun
On Thu 16 May 2013 14:58:15 Lad Prabhakar wrote:
From: Lad, Prabhakar prabhakar.cse...@gmail.com
This patch series cleans the VPIF driver, uses devm_* api wherever
required and uses module_platform_driver() to simplify the code.
This patch series applies on 3.10.rc1 and is tested on
Hi Hans,
On Thu, May 23, 2013 at 3:08 PM, Hans Verkuil hverk...@xs4all.nl wrote:
On Thu 16 May 2013 14:58:15 Lad Prabhakar wrote:
From: Lad, Prabhakar prabhakar.cse...@gmail.com
This patch series cleans the VPIF driver, uses devm_* api wherever
required and uses module_platform_driver() to
Hi Hans,
On Thu, May 23, 2013 at 3:05 PM, Hans Verkuil hverk...@xs4all.nl wrote:
On Tue 14 May 2013 12:45:32 Lad Prabhakar wrote:
From: Lad, Prabhakar prabhakar.cse...@gmail.com
This patch rearranges the header inclusion alphabetically
and also removes unnecessary includes.
As Laurent
On Tue 14 May 2013 13:00:36 Lad Prabhakar wrote:
From: Lad, Prabhakar prabhakar.cse...@gmail.com
add OF support for the tvp514x driver. Alongside this patch
removes unnecessary header file inclusion and sorts them alphabetically.
Signed-off-by: Lad, Prabhakar prabhakar.cse...@gmail.com
On Mon 13 May 2013 12:41:26 Prabhakar Lad wrote:
Hi Paul,
On Mon, May 13, 2013 at 3:35 PM, Paul Bolle pebo...@tiscali.nl wrote:
Prabhakar,
On Mon, 2013-05-13 at 15:27 +0530, Prabhakar Lad wrote:
Good catch! the dependency can be dropped now.
Great.
Are you planning to post a
Hi Hans,
On Thu, May 23, 2013 at 3:53 PM, Hans Verkuil hverk...@xs4all.nl wrote:
On Mon 13 May 2013 12:41:26 Prabhakar Lad wrote:
Hi Paul,
On Mon, May 13, 2013 at 3:35 PM, Paul Bolle pebo...@tiscali.nl wrote:
Prabhakar,
On Mon, 2013-05-13 at 15:27 +0530, Prabhakar Lad wrote:
Good
On Fri 17 May 2013 00:34:51 Sakari Ailus wrote:
Hi Andrzej,
Thanks for the patchset!
On Thu, May 16, 2013 at 10:14:33AM +0200, Andrzej Hajda wrote:
This patch adds managed version of initialization
function for v4l2 control handler.
Signed-off-by: Andrzej Hajda a.ha...@samsung.com
On Thu 16 May 2013 10:14:33 Andrzej Hajda wrote:
This patch adds managed version of initialization
function for v4l2 control handler.
Signed-off-by: Andrzej Hajda a.ha...@samsung.com
Reviewed-by: Sylwester Nawrocki s.nawro...@samsung.com
Signed-off-by: Kyungmin Park
On Thu 16 May 2013 10:14:34 Andrzej Hajda wrote:
This patch adds managed version of initialization
function for v4l2/i2c subdevices.
Signed-off-by: Andrzej Hajda a.ha...@samsung.com
Reviewed-by: Sylwester Nawrocki s.nawro...@samsung.com
Signed-off-by: Kyungmin Park kyungmin.p...@samsung.com
On Thu, May 23, 2013 at 11:13 AM, Maarten Lankhorst
maarten.lankho...@canonical.com wrote:
2. Do you really want to drop the *_slow variants?
Doing so might reduce debugging slightly. I like method #2 in
ww-mutex-design.txt, it makes it very clear why you
would handle the *_slow case
The following changes since commit 6a084d6b3dc200b855ae8a3c6771abe285a3835d:
[media] saa7115: Don't use a dynamic array (2013-05-21 12:04:16 -0300)
are available in the git repository at:
git://linuxtv.org/hverkuil/media_tree.git for-v3.10b
for you to fetch changes up to
Hi Alejandro,
On Wed, May 22, 2013 at 10:12 PM, Alejandro A. Valdés
av2...@gmail.com wrote:
Being able to capture the TV signal from a cable decoder; but can't make it
with getting audio working.I'm using an Easycap dc60 USB adapter, plugged in
to one of the USB 2.0 ports of an ASUS
The following changes since commit 6a084d6b3dc200b855ae8a3c6771abe285a3835d:
[media] saa7115: Don't use a dynamic array (2013-05-21 12:04:16 -0300)
are available in the git repository at:
git://linuxtv.org/hverkuil/media_tree.git for-v3.11
for you to fetch changes up to
Note: this superceeds my previous 3.10 pull request: I realized that the solo
fix
should also go to 3.10.
Regards,
Hans
The following changes since commit 6a084d6b3dc200b855ae8a3c6771abe285a3835d:
[media] saa7115: Don't use a dynamic array (2013-05-21 12:04:16 -0300)
are available
With the introduction in 3.10 of the new superior VIDIOC_DBG_G_CHIP_INFO
ioctl there is no longer any need for the DBG_G_CHIP_IDENT ioctl or the
v4l2-chip-ident.h header.
Remove it in those bridge drivers where it is easy to do so.
Signed-off-by: Hans Verkuil hans.verk...@cisco.com
---
On Tue, May 21, 2013 at 11:22 AM, Inki Dae inki@samsung.com wrote:
-Original Message-
From: Daniel Vetter [mailto:daniel.vet...@ffwll.ch] On Behalf Of Daniel
Vetter
Sent: Tuesday, May 21, 2013 4:45 PM
To: Inki Dae
Cc: 'Daniel Vetter'; 'Rob Clark'; 'linux-fbdev'; 'DRI mailing
-Original Message-
From: daniel.vet...@ffwll.ch [mailto:daniel.vet...@ffwll.ch] On Behalf Of
Daniel Vetter
Sent: Thursday, May 23, 2013 8:56 PM
To: Inki Dae
Cc: Rob Clark; linux-fbdev; DRI mailing list; Kyungmin Park; myungjoo.ham;
YoungJun Cho; linux-arm-ker...@lists.infradead.org;
The following patch series contains a few fixes and cleanups
in preparation for decoding support.
I've simplified the parameter buffer setup code, changed the hardware
command register access locking for multi-instance support on CODA7,
and added a list of supported codecs per device type, where
Signed-off-by: Philipp Zabel p.za...@pengutronix.de
---
drivers/media/platform/coda.c | 51 +++
1 file changed, 23 insertions(+), 28 deletions(-)
diff --git a/drivers/media/platform/coda.c b/drivers/media/platform/coda.c
index ef541b0..625ef3f 100644
---
Signed-off-by: Philipp Zabel p.za...@pengutronix.de
---
drivers/media/platform/coda.c | 4
1 file changed, 4 insertions(+)
diff --git a/drivers/media/platform/coda.c b/drivers/media/platform/coda.c
index 3be56b0..ef541b0 100644
--- a/drivers/media/platform/coda.c
+++
Not only do we need to wait for job completion when we want to
call a command on the CODA in start/stop_streaming, we also need
to make sure that a new job doesn't start before the command
finished.
Use a mutex to lock the coda command handling. On timeout, the
device_run job must be marked as
Signed-off-by: Philipp Zabel p.za...@pengutronix.de
---
drivers/media/platform/coda.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/media/platform/coda.c b/drivers/media/platform/coda.c
index 7ac2299..79a81eb 100644
--- a/drivers/media/platform/coda.c
+++
If we just declare the job finished here while the CODA is still
running, the call to v4l2_m2m_ctx_release in coda_release, which
is supposed to wait for a running job to finish, will return
immediately and free memory that the CODA is still using.
Just set the 'aborting' flag and let
In preparation for CODA7541 and CODA960 multi-stream support and for
replacement of the completion with a mutex lock, consolidate the
header encoding in a helper function.
Signed-off-by: Philipp Zabel p.za...@pengutronix.de
---
drivers/media/platform/coda.c | 112
GAMMA_OFFSET is different between CodaDx6 and CODA7.
Also, this is a bitfield, so drop the various
Signed-off-by: Philipp Zabel p.za...@pengutronix.de
---
drivers/media/platform/coda.c | 10 --
drivers/media/platform/coda.h | 8 ++--
2 files changed, 10 insertions(+), 8 deletions(-)
The application must have filled the bytesused field,
don't overwrite it here.
Signed-off-by: Philipp Zabel p.za...@pengutronix.de
---
drivers/media/platform/coda.c | 2 --
1 file changed, 2 deletions(-)
diff --git a/drivers/media/platform/coda.c b/drivers/media/platform/coda.c
index
This patch adds a list of supported codecs per device type which is used to
determine the allowed pixel formats and maximum frame sizes depending on the
possible codecs. It allows frame sizes larger than 720 x 576 on CODA7 and adds
support for the YVU420 (planar YUV 4:2:0 with switched Cb and Cr)
Good morning,
Please find the output the cat /proc/asound/ command below:
# cat /proc/asound/cards
0 [Intel ]: HDA-Intel - HDA Intel
HDA Intel at 0xf7cf8000 irq 45
1 [EasyALSA1 ]: easycapdc60 - easycap_alsa
easycap_alsa
Besides, this
On Thu, May 23, 2013 at 1:19 PM, Alejandro A. Valdés av2...@gmail.com wrote:
Good morning,
Please find the output the cat /proc/asound/ command below:
# cat /proc/asound/cards
0 [Intel ]: HDA-Intel - HDA Intel
HDA Intel at 0xf7cf8000 irq 45
1 [EasyALSA1
This message is generated daily by a cron job that builds media_tree for
the kernels and architectures in the list below.
Results of the daily build of media_tree:
date: Thu May 23 19:00:19 CEST 2013
git branch: test
git hash: 6a084d6b3dc200b855ae8a3c6771abe285a3835d
gcc
Alejandro,
You dropped the linux-media list from Cc. I'm adding it back.
On Thu, May 23, 2013 at 3:30 PM, Alejandro A. Valdés av2...@gmail.com wrote:
# lsmod
Module Size Used by
snd_usb_audio 106622 0
snd_usbmidi_lib24590 1 snd_usb_audio
easycap
From: Vladimir Barinov vladimir.bari...@cogentembedded.com
Add subdev video ops for ADV7180 video decoder. This makes decoder usable on
the soc-camera drivers.
Signed-off-by: Vladimir Barinov vladimir.bari...@cogentembedded.com
Signed-off-by: Sergei Shtylyov sergei.shtyl...@cogentembedded.com
On 05/23/2013 04:12 PM, Ezequiel Garcia wrote:
Alejandro,
You dropped the linux-media list from Cc. I'm adding it back.
On Thu, May 23, 2013 at 3:30 PM, Alejandro A. Valdés av2...@gmail.com wrote:
# lsmod
Module Size Used by
snd_usb_audio 106622 0
snd_usbmidi_lib
From: Vladimir Barinov vladimir.bari...@cogentembedded.com
Add OKI Semiconductor ML86V7667 video decoder driver.
Signed-off-by: Vladimir Barinov vladimir.bari...@cogentembedded.com
[Sergei: added v4l2_device_unregister_subdev() call to the error cleanup path of
ml86v7667_probe(); some cleanup.]
From: Vladimir Barinov vladimir.bari...@cogentembedded.com
Add Renesas R-Car VIN (Video In) V4L2 driver.
Based on the patch by Phil Edworthy phil.edwor...@renesas.com.
Signed-off-by: Vladimir Barinov vladimir.bari...@cogentembedded.com
[Sergei: removed deprecated IRQF_DISABLED flag,
Save flags correctly when taking spinlocks in v4l2_m2m_try_schedule.
Signed-off-by: John Sheu s...@google.com
---
drivers/media/v4l2-core/v4l2-mem2mem.c | 19 +++
1 file changed, 11 insertions(+), 8 deletions(-)
diff --git a/drivers/media/v4l2-core/v4l2-mem2mem.c
Does anyone have any contacts at Hauppauge that could make HD-PVR
firmware source available? I have done a little bit of work on
Ambarella chips, and I'd be happy to take a look at why the firmware is
crashing. My firmware is yet to crash after disabling IR RX.
-Jeff
On 05/23/2013 02:41 AM,
49 matches
Mail list logo
