The USB control messages require DMA to work. We cannot pass
a stack-allocated buffer, as it is not warranted that the
stack would be into a DMA enabled area.

Signed-off-by: Mauro Carvalho Chehab <mche...@s-opensource.com>
---
 drivers/media/usb/dvb-usb/af9005.c | 317 +++++++++++++++++++++----------------
 1 file changed, 180 insertions(+), 137 deletions(-)

diff --git a/drivers/media/usb/dvb-usb/af9005.c 
b/drivers/media/usb/dvb-usb/af9005.c
index efa782ed6e2d..4883f2fb4c2d 100644
--- a/drivers/media/usb/dvb-usb/af9005.c
+++ b/drivers/media/usb/dvb-usb/af9005.c
@@ -52,17 +52,16 @@ u8 regmask[8] = { 0x01, 0x03, 0x07, 0x0f, 0x1f, 0x3f, 0x7f, 
0xff };
 struct af9005_device_state {
        u8 sequence;
        int led_state;
+       unsigned char data[256];
+       struct mutex data_mutex;
 };
 
 static int af9005_generic_read_write(struct dvb_usb_device *d, u16 reg,
                              int readwrite, int type, u8 * values, int len)
 {
        struct af9005_device_state *st = d->priv;
-       u8 obuf[16] = { 0 };
-       u8 ibuf[17] = { 0 };
-       u8 command;
-       int i;
-       int ret;
+       u8 command, seq;
+       int i, ret;
 
        if (len < 1) {
                err("generic read/write, less than 1 byte. Makes no sense.");
@@ -73,16 +72,17 @@ static int af9005_generic_read_write(struct dvb_usb_device 
*d, u16 reg,
                return -EINVAL;
        }
 
-       obuf[0] = 14;           /* rest of buffer length low */
-       obuf[1] = 0;            /* rest of buffer length high */
+       mutex_lock(&st->data_mutex);
+       st->data[0] = 14;               /* rest of buffer length low */
+       st->data[1] = 0;                /* rest of buffer length high */
 
-       obuf[2] = AF9005_REGISTER_RW;   /* register operation */
-       obuf[3] = 12;           /* rest of buffer length */
+       st->data[2] = AF9005_REGISTER_RW;       /* register operation */
+       st->data[3] = 12;               /* rest of buffer length */
 
-       obuf[4] = st->sequence++;       /* sequence number */
+       st->data[4] = seq = st->sequence++;     /* sequence number */
 
-       obuf[5] = (u8) (reg >> 8);      /* register address */
-       obuf[6] = (u8) (reg & 0xff);
+       st->data[5] = (u8) (reg >> 8);  /* register address */
+       st->data[6] = (u8) (reg & 0xff);
 
        if (type == AF9005_OFDM_REG) {
                command = AF9005_CMD_OFDM_REG;
@@ -96,51 +96,52 @@ static int af9005_generic_read_write(struct dvb_usb_device 
*d, u16 reg,
        command |= readwrite;
        if (readwrite == AF9005_CMD_WRITE)
                for (i = 0; i < len; i++)
-                       obuf[8 + i] = values[i];
+                       st->data[8 + i] = values[i];
        else if (type == AF9005_TUNER_REG)
                /* read command for tuner, the first byte contains the i2c 
address */
-               obuf[8] = values[0];
-       obuf[7] = command;
+               st->data[8] = values[0];
+       st->data[7] = command;
 
-       ret = dvb_usb_generic_rw(d, obuf, 16, ibuf, 17, 0);
+       ret = dvb_usb_generic_rw(d, st->data, 16, st->data, 17, 0);
        if (ret)
-               return ret;
+               goto ret;
 
        /* sanity check */
-       if (ibuf[2] != AF9005_REGISTER_RW_ACK) {
+       if (st->data[2] != AF9005_REGISTER_RW_ACK) {
                err("generic read/write, wrong reply code.");
-               return -EIO;
+               ret = -EIO;
+               goto ret;
        }
-       if (ibuf[3] != 0x0d) {
+       if (st->data[3] != 0x0d) {
                err("generic read/write, wrong length in reply.");
-               return -EIO;
+               ret = -EIO;
+               goto ret;
        }
-       if (ibuf[4] != obuf[4]) {
+       if (st->data[4] != seq) {
                err("generic read/write, wrong sequence in reply.");
-               return -EIO;
+               ret = -EIO;
+               goto ret;
        }
        /*
-          Windows driver doesn't check these fields, in fact sometimes
-          the register in the reply is different that what has been sent
-
-          if (ibuf[5] != obuf[5] || ibuf[6] != obuf[6]) {
-          err("generic read/write, wrong register in reply.");
-          return -EIO;
-          }
-          if (ibuf[7] != command) {
-          err("generic read/write wrong command in reply.");
-          return -EIO;
-          }
+        * In thesis, both input and output buffers should have
+        * identical values for st->data[5] to st->data[8].
+        * However, windows driver doesn't check these fields, in fact
+        * sometimes the register in the reply is different that what
+        * has been sent
         */
-       if (ibuf[16] != 0x01) {
+       if (st->data[16] != 0x01) {
                err("generic read/write wrong status code in reply.");
-               return -EIO;
+               ret = -EIO;
+               goto ret;
        }
+
        if (readwrite == AF9005_CMD_READ)
                for (i = 0; i < len; i++)
-                       values[i] = ibuf[8 + i];
+                       values[i] = st->data[8 + i];
 
-       return 0;
+ret:
+       mutex_unlock(&st->data_mutex);
+       return ret;
 
 }
 
@@ -464,8 +465,7 @@ int af9005_send_command(struct dvb_usb_device *d, u8 
command, u8 * wbuf,
        struct af9005_device_state *st = d->priv;
 
        int ret, i, packet_len;
-       u8 buf[64];
-       u8 ibuf[64];
+       u8 seq;
 
        if (wlen < 0) {
                err("send command, wlen less than 0 bytes. Makes no sense.");
@@ -480,94 +480,97 @@ int af9005_send_command(struct dvb_usb_device *d, u8 
command, u8 * wbuf,
                return -EINVAL;
        }
        packet_len = wlen + 5;
-       buf[0] = (u8) (packet_len & 0xff);
-       buf[1] = (u8) ((packet_len & 0xff00) >> 8);
 
-       buf[2] = 0x26;          /* packet type */
-       buf[3] = wlen + 3;
-       buf[4] = st->sequence++;
-       buf[5] = command;
-       buf[6] = wlen;
+       mutex_lock(&st->data_mutex);
+
+       st->data[0] = (u8) (packet_len & 0xff);
+       st->data[1] = (u8) ((packet_len & 0xff00) >> 8);
+
+       st->data[2] = 0x26;             /* packet type */
+       st->data[3] = wlen + 3;
+       st->data[4] = seq = st->sequence++;
+       st->data[5] = command;
+       st->data[6] = wlen;
        for (i = 0; i < wlen; i++)
-               buf[7 + i] = wbuf[i];
-       ret = dvb_usb_generic_rw(d, buf, wlen + 7, ibuf, rlen + 7, 0);
-       if (ret)
-               return ret;
-       if (ibuf[2] != 0x27) {
+               st->data[7 + i] = wbuf[i];
+       ret = dvb_usb_generic_rw(d, st->data, wlen + 7, st->data, rlen + 7, 0);
+       if (st->data[2] != 0x27) {
                err("send command, wrong reply code.");
-               return -EIO;
-       }
-       if (ibuf[4] != buf[4]) {
+               ret = -EIO;
+       } else if (st->data[4] != seq) {
                err("send command, wrong sequence in reply.");
-               return -EIO;
-       }
-       if (ibuf[5] != 0x01) {
+               ret = -EIO;
+       } else if (st->data[5] != 0x01) {
                err("send command, wrong status code in reply.");
-               return -EIO;
-       }
-       if (ibuf[6] != rlen) {
+               ret = -EIO;
+       } else if (st->data[6] != rlen) {
                err("send command, invalid data length in reply.");
-               return -EIO;
+               ret = -EIO;
        }
-       for (i = 0; i < rlen; i++)
-               rbuf[i] = ibuf[i + 7];
-       return 0;
+       if (!ret) {
+               for (i = 0; i < rlen; i++)
+                       rbuf[i] = st->data[i + 7];
+       }
+
+       mutex_unlock(&st->data_mutex);
+       return ret;
 }
 
 int af9005_read_eeprom(struct dvb_usb_device *d, u8 address, u8 * values,
                       int len)
 {
        struct af9005_device_state *st = d->priv;
-       u8 obuf[16], ibuf[14];
+       u8 seq;
        int ret, i;
 
-       memset(obuf, 0, sizeof(obuf));
-       memset(ibuf, 0, sizeof(ibuf));
+       mutex_lock(&st->data_mutex);
 
-       obuf[0] = 14;           /* length of rest of packet low */
-       obuf[1] = 0;            /* length of rest of packer high */
+       memset(st->data, 0, sizeof(st->data));
 
-       obuf[2] = 0x2a;         /* read/write eeprom */
+       st->data[0] = 14;               /* length of rest of packet low */
+       st->data[1] = 0;                /* length of rest of packer high */
 
-       obuf[3] = 12;           /* size */
+       st->data[2] = 0x2a;             /* read/write eeprom */
 
-       obuf[4] = st->sequence++;
+       st->data[3] = 12;               /* size */
 
-       obuf[5] = 0;            /* read */
+       st->data[4] = seq = st->sequence++;
 
-       obuf[6] = len;
-       obuf[7] = address;
-       ret = dvb_usb_generic_rw(d, obuf, 16, ibuf, 14, 0);
-       if (ret)
-               return ret;
-       if (ibuf[2] != 0x2b) {
+       st->data[5] = 0;                /* read */
+
+       st->data[6] = len;
+       st->data[7] = address;
+       ret = dvb_usb_generic_rw(d, st->data, 16, st->data, 14, 0);
+       if (st->data[2] != 0x2b) {
                err("Read eeprom, invalid reply code");
-               return -EIO;
-       }
-       if (ibuf[3] != 10) {
+               ret = -EIO;
+       } else if (st->data[3] != 10) {
                err("Read eeprom, invalid reply length");
-               return -EIO;
-       }
-       if (ibuf[4] != obuf[4]) {
+               ret = -EIO;
+       } else if (st->data[4] != seq) {
                err("Read eeprom, wrong sequence in reply ");
-               return -EIO;
-       }
-       if (ibuf[5] != 1) {
+               ret = -EIO;
+       } else if (st->data[5] != 1) {
                err("Read eeprom, wrong status in reply ");
-               return -EIO;
+               ret = -EIO;
        }
-       for (i = 0; i < len; i++) {
-               values[i] = ibuf[6 + i];
+
+       if (!ret) {
+               for (i = 0; i < len; i++)
+                       values[i] = st->data[6 + i];
        }
-       return 0;
+       mutex_unlock(&st->data_mutex);
+
+       return ret;
 }
 
-static int af9005_boot_packet(struct usb_device *udev, int type, u8 * reply)
+static int af9005_boot_packet(struct usb_device *udev, int type, u8 *reply,
+                             u8 *buf, int size)
 {
-       u8 buf[FW_BULKOUT_SIZE + 2];
        u16 checksum;
        int act_len, i, ret;
-       memset(buf, 0, sizeof(buf));
+
+       memset(buf, 0, size);
        buf[0] = (u8) (FW_BULKOUT_SIZE & 0xff);
        buf[1] = (u8) ((FW_BULKOUT_SIZE >> 8) & 0xff);
        switch (type) {
@@ -720,15 +723,21 @@ static int af9005_download_firmware(struct usb_device 
*udev, const struct firmwa
 {
        int i, packets, ret, act_len;
 
-       u8 buf[FW_BULKOUT_SIZE + 2];
+       u8 *buf;
        u8 reply;
 
-       ret = af9005_boot_packet(udev, FW_CONFIG, &reply);
+       buf = kmalloc(FW_BULKOUT_SIZE + 2, GFP_KERNEL);
+       if (!buf)
+               return -ENOMEM;
+
+       ret = af9005_boot_packet(udev, FW_CONFIG, &reply, buf,
+                                FW_BULKOUT_SIZE + 2);
        if (ret)
-               return ret;
+               goto err;
        if (reply != 0x01) {
                err("before downloading firmware, FW_CONFIG expected 0x01, 
received 0x%x", reply);
-               return -EIO;
+               ret = -EIO;
+               goto err;
        }
        packets = fw->size / FW_BULKOUT_SIZE;
        buf[0] = (u8) (FW_BULKOUT_SIZE & 0xff);
@@ -743,28 +752,35 @@ static int af9005_download_firmware(struct usb_device 
*udev, const struct firmwa
                                   buf, FW_BULKOUT_SIZE + 2, &act_len, 1000);
                if (ret) {
                        err("firmware download failed at packet %d with code 
%d", i, ret);
-                       return ret;
+                       goto err;
                }
        }
-       ret = af9005_boot_packet(udev, FW_CONFIRM, &reply);
+       ret = af9005_boot_packet(udev, FW_CONFIRM, &reply,
+                                buf, FW_BULKOUT_SIZE + 2);
        if (ret)
-               return ret;
+               goto err;
        if (reply != (u8) (packets & 0xff)) {
                err("after downloading firmware, FW_CONFIRM expected 0x%x, 
received 0x%x", packets & 0xff, reply);
-               return -EIO;
+               ret = -EIO;
+               goto err;
        }
-       ret = af9005_boot_packet(udev, FW_BOOT, &reply);
+       ret = af9005_boot_packet(udev, FW_BOOT, &reply, buf,
+                                FW_BULKOUT_SIZE + 2);
        if (ret)
-               return ret;
-       ret = af9005_boot_packet(udev, FW_CONFIG, &reply);
+               goto err;
+       ret = af9005_boot_packet(udev, FW_CONFIG, &reply, buf,
+                                FW_BULKOUT_SIZE + 2);
        if (ret)
-               return ret;
+               goto err;
        if (reply != 0x02) {
                err("after downloading firmware, FW_CONFIG expected 0x02, 
received 0x%x", reply);
-               return -EIO;
+               ret = -EIO;
+               goto err;
        }
 
-       return 0;
+err:
+       kfree(buf);
+       return ret;
 
 }
 
@@ -823,53 +839,59 @@ static int af9005_rc_query(struct dvb_usb_device *d, u32 
* event, int *state)
 {
        struct af9005_device_state *st = d->priv;
        int ret, len;
-
-       u8 obuf[5];
-       u8 ibuf[256];
+       u8 seq;
 
        *state = REMOTE_NO_KEY_PRESSED;
        if (rc_decode == NULL) {
                /* it shouldn't never come here */
                return 0;
        }
+
+       mutex_lock(&st->data_mutex);
+
        /* deb_info("rc_query\n"); */
-       obuf[0] = 3;            /* rest of packet length low */
-       obuf[1] = 0;            /* rest of packet lentgh high */
-       obuf[2] = 0x40;         /* read remote */
-       obuf[3] = 1;            /* rest of packet length */
-       obuf[4] = st->sequence++;       /* sequence number */
-       ret = dvb_usb_generic_rw(d, obuf, 5, ibuf, 256, 0);
+       st->data[0] = 3;                /* rest of packet length low */
+       st->data[1] = 0;                /* rest of packet lentgh high */
+       st->data[2] = 0x40;             /* read remote */
+       st->data[3] = 1;                /* rest of packet length */
+       st->data[4] = seq = st->sequence++;     /* sequence number */
+       ret = dvb_usb_generic_rw(d, st->data, 5, st->data, 256, 0);
        if (ret) {
                err("rc query failed");
-               return ret;
+               goto ret;
        }
-       if (ibuf[2] != 0x41) {
+       if (st->data[2] != 0x41) {
                err("rc query bad header.");
-               return -EIO;
-       }
-       if (ibuf[4] != obuf[4]) {
+               ret = -EIO;
+               goto ret;
+       } else if (st->data[4] != seq) {
                err("rc query bad sequence.");
-               return -EIO;
+               ret = -EIO;
+               goto ret;
        }
-       len = ibuf[5];
+       len = st->data[5];
        if (len > 246) {
                err("rc query invalid length");
-               return -EIO;
+               ret = -EIO;
+               goto ret;
        }
        if (len > 0) {
                deb_rc("rc data (%d) ", len);
-               debug_dump((ibuf + 6), len, deb_rc);
-               ret = rc_decode(d, &ibuf[6], len, event, state);
+               debug_dump((st->data + 6), len, deb_rc);
+               ret = rc_decode(d, &st->data[6], len, event, state);
                if (ret) {
                        err("rc_decode failed");
-                       return ret;
+                       goto ret;
                } else {
                        deb_rc("rc_decode state %x event %x\n", *state, *event);
                        if (*state == REMOTE_KEY_REPEAT)
                                *event = d->last_event;
                }
        }
-       return 0;
+
+ret:
+       mutex_unlock(&st->data_mutex);
+       return ret;
 }
 
 static int af9005_power_ctrl(struct dvb_usb_device *d, int onoff)
@@ -953,10 +975,16 @@ static int af9005_identify_state(struct usb_device *udev,
                                 int *cold)
 {
        int ret;
-       u8 reply;
-       ret = af9005_boot_packet(udev, FW_CONFIG, &reply);
+       u8 reply, *buf;
+
+       buf = kmalloc(FW_BULKOUT_SIZE + 2, GFP_KERNEL);
+       if (!buf)
+               return -ENOMEM;
+
+       ret = af9005_boot_packet(udev, FW_CONFIG, &reply,
+                                buf, FW_BULKOUT_SIZE + 2);
        if (ret)
-               return ret;
+               goto err;
        deb_info("result of FW_CONFIG in identify state %d\n", reply);
        if (reply == 0x01)
                *cold = 1;
@@ -965,7 +993,10 @@ static int af9005_identify_state(struct usb_device *udev,
        else
                return -EIO;
        deb_info("Identify state cold = %d\n", *cold);
-       return 0;
+
+err:
+       kfree(buf);
+       return ret;
 }
 
 static struct dvb_usb_device_properties af9005_properties;
@@ -973,8 +1004,20 @@ static struct dvb_usb_device_properties af9005_properties;
 static int af9005_usb_probe(struct usb_interface *intf,
                            const struct usb_device_id *id)
 {
-       return dvb_usb_device_init(intf, &af9005_properties,
-                                  THIS_MODULE, NULL, adapter_nr);
+       struct dvb_usb_device *d;
+       struct af9005_device_state *st;
+       int ret;
+
+       ret = dvb_usb_device_init(intf, &af9005_properties,
+                                 THIS_MODULE, &d, adapter_nr);
+
+       if (ret < 0)
+               return ret;
+
+       st = d->priv;
+       mutex_init(&st->data_mutex);
+
+       return 0;
 }
 
 enum af9005_usb_table_entry {
-- 
2.7.4


--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to