Re: [PATCH] Add support for Zolid Hybrid PCI card
I accidently sent this mail to Michael's private address, I'm sorry for that. Hi, I bought the same card a couple of months ago and back then, it just wouldn't work. I set up a wiki page, which henk has updated with links to patches, to document the card as well as possible. I set up a thread on this mailing list (http://osdir.com/ml/video4linux-list/2009-05/msg00102.html) on making the card work, but that resulted to nothing. I was surprised to find this thread when I accidently searched for Zolid in my mailbox. I'm at my internship at the moment, but I'll try this patch as soon as I get home :) If you need the card for further development/testing: I'm willing to send it to you by mail. I just want it back when you're done testing, so I can finally watch tv on my computer :) Greetings, Sander Pientka 2009/9/14 Michael Krufky mkru...@kernellabs.com: On Wed, Sep 9, 2009 at 11:08 AM, Michael Krufky mkru...@kernellabs.com wrote: On Wed, Sep 9, 2009 at 10:01 AM, s...@systol-ng.god.lan wrote: On Tue, Sep 08, 2009 at 05:57:12PM -0400, Michael Krufky wrote: Henk, Why do you expect a 8295? If your board uses the SAA7131, then we would expect an 8290 IF demod. Ah, I just checked the history of this email thread -- I must have read one of your previous emails too quickly. :-) Perhaps there is a typo in the document that you read -- tda8290 is correct. Just to come back to this point, Well zolid has a SAA7131E, if you look at the datasheet (botom of page 15) http://www.nxp.com/acrobat_download/datasheets/SAA7131E_3.pdf it says: The SAA7131E is functionally compatible with the SAA7135 audio and video broadcast decoder device and the stand-alone low-IF device TDA8295. So thats why I asked. Regards, Henk FIX YOUR MAILER!! It's a pain to reply to your emails -- I have to insert your actual email address each time :-( Anyway, I am under the impression that it's a typo in the datasheet. It is actually a tda8290. Henk, Just FYI, I merged your patch to my saa7134 repository last week: http://www.kernellabs.com/hg/~mkrufky/saa7134 I thought that I had replied to you already but that message seems to have gotten dropped somewhere :-/ I intend to send a pull request to Mauro for this, in addition to some other pending patches after he merges what I have already pending. Thanks again for your work. Regards, Mike Krufky -- To unsubscribe from this list: send the line unsubscribe linux-media in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line unsubscribe linux-media in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: [PATCH] Add support for Zolid Hybrid PCI card
2009/9/14 Michael Krufky mkru...@kernellabs.com: On Wed, Sep 9, 2009 at 11:08 AM, Michael Krufky mkru...@kernellabs.com wrote: On Wed, Sep 9, 2009 at 10:01 AM, s...@systol-ng.god.lan wrote: On Tue, Sep 08, 2009 at 05:57:12PM -0400, Michael Krufky wrote: Henk, Why do you expect a 8295? If your board uses the SAA7131, then we would expect an 8290 IF demod. Ah, I just checked the history of this email thread -- I must have read one of your previous emails too quickly. :-) Perhaps there is a typo in the document that you read -- tda8290 is correct. Just to come back to this point, Well zolid has a SAA7131E, if you look at the datasheet (botom of page 15) http://www.nxp.com/acrobat_download/datasheets/SAA7131E_3.pdf it says: The SAA7131E is functionally compatible with the SAA7135 audio and video broadcast decoder device and the stand-alone low-IF device TDA8295. So thats why I asked. Regards, Henk FIX YOUR MAILER!! It's a pain to reply to your emails -- I have to insert your actual email address each time :-( Anyway, I am under the impression that it's a typo in the datasheet. It is actually a tda8290. Henk, Just FYI, I merged your patch to my saa7134 repository last week: http://www.kernellabs.com/hg/~mkrufky/saa7134 I thought that I had replied to you already but that message seems to have gotten dropped somewhere :-/ I intend to send a pull request to Mauro for this, in addition to some other pending patches after he merges what I have already pending. Thanks again for your work. Regards, Mike Krufky On Tue, Dec 8, 2009 at 11:10 AM, Sander Pientka cumulus0...@gmail.com wrote: I accidently sent this mail to Michael's private address, I'm sorry for that. Hi, I bought the same card a couple of months ago and back then, it just wouldn't work. I set up a wiki page, which henk has updated with links to patches, to document the card as well as possible. I set up a thread on this mailing list (http://osdir.com/ml/video4linux-list/2009-05/msg00102.html) on making the card work, but that resulted to nothing. I was surprised to find this thread when I accidently searched for Zolid in my mailbox. I'm at my internship at the moment, but I'll try this patch as soon as I get home :) If you need the card for further development/testing: I'm willing to send it to you by mail. I just want it back when you're done testing, so I can finally watch tv on my computer :) Greetings, Sander Pientka Please do not top-quote. The policy on this mailing list is to include the reply BELOW the quoted text. Anyway, don't even bother testing any patch -- just use the latest v4l-dvb tree -- the code is all merged up. Regards, Mike -- To unsubscribe from this list: send the line unsubscribe linux-media in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: [PATCH] Add support for Zolid Hybrid PCI card
On Wed, Sep 9, 2009 at 11:08 AM, Michael Krufky mkru...@kernellabs.com wrote: On Wed, Sep 9, 2009 at 10:01 AM, s...@systol-ng.god.lan wrote: On Tue, Sep 08, 2009 at 05:57:12PM -0400, Michael Krufky wrote: Henk, Why do you expect a 8295? If your board uses the SAA7131, then we would expect an 8290 IF demod. Ah, I just checked the history of this email thread -- I must have read one of your previous emails too quickly. :-) Perhaps there is a typo in the document that you read -- tda8290 is correct. Just to come back to this point, Well zolid has a SAA7131E, if you look at the datasheet (botom of page 15) http://www.nxp.com/acrobat_download/datasheets/SAA7131E_3.pdf it says: The SAA7131E is functionally compatible with the SAA7135 audio and video broadcast decoder device and the stand-alone low-IF device TDA8295. So thats why I asked. Regards, Henk FIX YOUR MAILER!! It's a pain to reply to your emails -- I have to insert your actual email address each time :-( Anyway, I am under the impression that it's a typo in the datasheet. It is actually a tda8290. Henk, Just FYI, I merged your patch to my saa7134 repository last week: http://www.kernellabs.com/hg/~mkrufky/saa7134 I thought that I had replied to you already but that message seems to have gotten dropped somewhere :-/ I intend to send a pull request to Mauro for this, in addition to some other pending patches after he merges what I have already pending. Thanks again for your work. Regards, Mike Krufky -- To unsubscribe from this list: send the line unsubscribe linux-media in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: [PATCH] Add support for Zolid Hybrid PCI card
On Tue, Sep 08, 2009 at 05:57:12PM -0400, Michael Krufky wrote:
Hi Mike,
Henk,
Why do you expect a 8295? If your board uses the SAA7131, then we
would expect an 8290 IF demod.
Ah, I just checked the history of this email thread -- I must have
read one of your previous emails too quickly. :-) Perhaps there is a
typo in the document that you read -- tda8290 is correct.
About the analog noise and quality issues that you report, perhaps
there is some tweaking that can be done to help the situation. I dont
have that Zolid board, myself, so I can't reallt help much in that
respect, unfortunately.
At this point, I feel that your patch is fine to merge into the
development repository, although I have some small cleanup requests:
#1) You can omit this line from the tda18271_config struct:
.config = 0, /* no AGC config */
This is not necessary, as it is initialized at zero and this serves no
purpose even for documentation's sake.
#2) The configuration inside saa7134-cards.c should be moved to the
end of the boards array.
#3) The configuration case inside saa7134-dvb.c should be moved to the
end of the switch..case block.
I'll wait for these cleanups, then I have no issue pushing up your
patch. Any quality improvements that we find along the way can
certainly be added afterwards.
Good work.
Regards,
Mike
Hi Mike,
Did the last cleanups.
Good review! Thank you for your help.
- henk
- patch comment -
Adds support for Zolid Hybrid PCI card:
http://linuxtv.org/wiki/index.php/Zolid_Hybrid_TV_Tuner
test status analog (PAL-B):
- Sometimes picture is noisy, but it becomes crystal clear after
switching between channels. (happens for example at 687.25 Mhz)
- On a lower frequency (511.25 Mhz) the picture is always sharp, but
lacks colour.
- No sound problems.
- radio untested.
Digital:
- DVB-T/H stream reception works.
- Would expect to see some more channels in the higher frequency region.
Overall is the impression that sensitivity still needs improvement
both in analog and digital modes.
Signed-off-by: henk.vergo...@gmail.com
diff -r 2b49813f8482 linux/drivers/media/video/saa7134/saa7134-cards.c
--- a/linux/drivers/media/video/saa7134/saa7134-cards.c Thu Sep 03 09:06:34
2009 -0300
+++ b/linux/drivers/media/video/saa7134/saa7134-cards.c Wed Sep 09 07:47:10
2009 +0200
@@ -5296,6 +5296,27 @@
.amux = TV,
},
},
+ [SAA7134_BOARD_ZOLID_HYBRID_PCI] = {
+ .name = Zolid Hybrid TV Tuner PCI,
+ .audio_clock= 0x00187de7,
+ .tuner_type = TUNER_PHILIPS_TDA8290,
+ .radio_type = UNSET,
+ .tuner_addr = ADDR_UNSET,
+ .radio_addr = ADDR_UNSET,
+ .tuner_config = 0,
+ .mpeg = SAA7134_MPEG_DVB,
+ .ts_type= SAA7134_MPEG_TS_PARALLEL,
+ .inputs = {{
+ .name = name_tv,
+ .vmux = 1,
+ .amux = TV,
+ .tv = 1,
+ }},
+ .radio = { // untested
+ .name = name_radio,
+ .amux = TV,
+ },
+ },
};
@@ -6429,6 +6450,12 @@
.subdevice= 0x0138, /* LifeView FlyTV Prime30 OEM */
.driver_data = SAA7134_BOARD_ROVERMEDIA_LINK_PRO_FM,
}, {
+ .vendor = PCI_VENDOR_ID_PHILIPS,
+ .device = PCI_DEVICE_ID_PHILIPS_SAA7133,
+ .subvendor= PCI_VENDOR_ID_PHILIPS,
+ .subdevice= 0x2004,
+ .driver_data = SAA7134_BOARD_ZOLID_HYBRID_PCI,
+ }, {
/* --- boards without eeprom + subsystem ID --- */
.vendor = PCI_VENDOR_ID_PHILIPS,
.device = PCI_DEVICE_ID_PHILIPS_SAA7134,
diff -r 2b49813f8482 linux/drivers/media/video/saa7134/saa7134-dvb.c
--- a/linux/drivers/media/video/saa7134/saa7134-dvb.c Thu Sep 03 09:06:34
2009 -0300
+++ b/linux/drivers/media/video/saa7134/saa7134-dvb.c Wed Sep 09 07:47:10
2009 +0200
@@ -1013,6 +1013,22 @@
.probe_tuner = TDA829X_DONT_PROBE,
};
+static struct tda10048_config zolid_tda10048_config = {
+ .demod_address= 0x10 1,
+ .output_mode = TDA10048_PARALLEL_OUTPUT,
+ .fwbulkwritelen = TDA10048_BULKWRITE_200,
+ .inversion= TDA10048_INVERSION_ON,
+ .dtv6_if_freq_khz = TDA10048_IF_3300,
+ .dtv7_if_freq_khz = TDA10048_IF_3500,
+ .dtv8_if_freq_khz = TDA10048_IF_4000,
+ .clk_freq_khz = TDA10048_CLK_16000,
+ .disable_gate_access = 1,
+};
+
+static struct tda18271_config zolid_tda18271_config = {
+ .gate= TDA18271_GATE_ANALOG,
+};
+
/* ==
* Core code
*/
@@ -1492,6 +1508,19 @@
Re: [PATCH] Add support for Zolid Hybrid PCI card
On Mon, Sep 07, 2009 at 12:12:15PM -0400, Michael Krufky wrote:
Henk,
Something is up with your mailer, making it difficult to reply to your
emails going to some spam account instead of your email address...
Please look into that, maybe set up a reply-to or something.
Anyway, thanks for your responses -- that clears a lot up. I
recommend to also create your own tda18271 config structure, as I have
a pending pull request that will tweak the tda18271 configuration
within that hcw_tda18271_config structure -- Id hate for your board to
break as a result of using somebody else's config.
About the SAA7131 - correct -- it is a SAA713x combined with a TDA8295
analog IF demod. I was just checking to see that it was actually what
your board uses. Looks good to me.
As far as the analog input setup, have you verified that those work
properly, or did you also copy those from the HVR1120 configuration?
If you havent verified those yourself, I recommend removing them from
your patch -- better to not check in untested configurations, as it
may lead others to believe that it should work, causing support
problems for the future.
After you re-submit with the above recommended changes, I'll be happy
to push the patch for you.
Regards,
Mike
Hi Mike,
I tested the analog part (PAL-B), sound and picture work but with
some issues:
- Sometimes picture is noisy, but it becomes crystal clear after
switching between channels. (happens for example at 687.25 Mhz)
- On a lower frequency (511.25 Mhz) the picture is always sharp, but
lacks colour.
- No sound problems.
- radio untested.
Digital:
- DVB-T/H stream reception works.
- Would expect to see some more channels in the higher frequency region.
Overall is the impression that sensitivity still needs improvement
both in analog and digital modes.
If you look at the dmesg, analog tuner is detected as 8290 instead of
the expected 8295 could this be a problem?
[280192.420033] tda829x 3-004b: type set to tda8290+18271
For information on the card see:
http://linuxtv.org/wiki/index.php/Zolid_Hybrid_TV_Tuner
Signed-off-by: henk.vergo...@gmail.com
diff -r 2b49813f8482 linux/drivers/media/video/saa7134/saa7134-cards.c
--- a/linux/drivers/media/video/saa7134/saa7134-cards.c Thu Sep 03 09:06:34
2009 -0300
+++ b/linux/drivers/media/video/saa7134/saa7134-cards.c Tue Sep 08 00:32:02
2009 +0200
@@ -3521,6 +3521,27 @@
.gpio = 0x0800100, /* GPIO 23 HI for FM */
},
},
+ [SAA7134_BOARD_ZOLID_HYBRID_PCI] = {
+ .name = Zolid Hybrid TV Tuner PCI,
+ .audio_clock= 0x00187de7,
+ .tuner_type = TUNER_PHILIPS_TDA8290,
+ .radio_type = UNSET,
+ .tuner_addr = ADDR_UNSET,
+ .radio_addr = ADDR_UNSET,
+ .tuner_config = 0,
+ .mpeg = SAA7134_MPEG_DVB,
+ .ts_type= SAA7134_MPEG_TS_PARALLEL,
+ .inputs = {{
+ .name = name_tv,
+ .vmux = 1,
+ .amux = TV,
+ .tv = 1,
+ }},
+ .radio = { // untested
+ .name = name_radio,
+ .amux = TV,
+ },
+ },
[SAA7134_BOARD_CINERGY_HT_PCMCIA] = {
.name = Terratec Cinergy HT PCMCIA,
.audio_clock= 0x00187de7,
@@ -6429,6 +6450,12 @@
.subdevice= 0x0138, /* LifeView FlyTV Prime30 OEM */
.driver_data = SAA7134_BOARD_ROVERMEDIA_LINK_PRO_FM,
}, {
+ .vendor = PCI_VENDOR_ID_PHILIPS,
+ .device = PCI_DEVICE_ID_PHILIPS_SAA7133,
+ .subvendor= PCI_VENDOR_ID_PHILIPS,
+ .subdevice= 0x2004,
+ .driver_data = SAA7134_BOARD_ZOLID_HYBRID_PCI,
+ }, {
/* --- boards without eeprom + subsystem ID --- */
.vendor = PCI_VENDOR_ID_PHILIPS,
.device = PCI_DEVICE_ID_PHILIPS_SAA7134,
diff -r 2b49813f8482 linux/drivers/media/video/saa7134/saa7134-dvb.c
--- a/linux/drivers/media/video/saa7134/saa7134-dvb.c Thu Sep 03 09:06:34
2009 -0300
+++ b/linux/drivers/media/video/saa7134/saa7134-dvb.c Tue Sep 08 00:32:02
2009 +0200
@@ -1013,6 +1013,23 @@
.probe_tuner = TDA829X_DONT_PROBE,
};
+static struct tda10048_config zolid_tda10048_config = {
+ .demod_address= 0x10 1,
+ .output_mode = TDA10048_PARALLEL_OUTPUT,
+ .fwbulkwritelen = TDA10048_BULKWRITE_200,
+ .inversion= TDA10048_INVERSION_ON,
+ .dtv6_if_freq_khz = TDA10048_IF_3300,
+ .dtv7_if_freq_khz = TDA10048_IF_3500,
+ .dtv8_if_freq_khz = TDA10048_IF_4000,
+ .clk_freq_khz = TDA10048_CLK_16000,
+ .disable_gate_access = 1,
+};
+
+static struct
Re: [PATCH] Add support for Zolid Hybrid PCI card
On Tue, Sep 8, 2009 at 5:27 PM, s...@systol-ng.god.lan wrote: On Mon, Sep 07, 2009 at 12:12:15PM -0400, Michael Krufky wrote: Henk, Something is up with your mailer, making it difficult to reply to your emails going to some spam account instead of your email address... Please look into that, maybe set up a reply-to or something. Anyway, thanks for your responses -- that clears a lot up. I recommend to also create your own tda18271 config structure, as I have a pending pull request that will tweak the tda18271 configuration within that hcw_tda18271_config structure -- Id hate for your board to break as a result of using somebody else's config. About the SAA7131 - correct -- it is a SAA713x combined with a TDA8295 analog IF demod. I was just checking to see that it was actually what your board uses. Looks good to me. As far as the analog input setup, have you verified that those work properly, or did you also copy those from the HVR1120 configuration? If you havent verified those yourself, I recommend removing them from your patch -- better to not check in untested configurations, as it may lead others to believe that it should work, causing support problems for the future. After you re-submit with the above recommended changes, I'll be happy to push the patch for you. Regards, Mike Hi Mike, I tested the analog part (PAL-B), sound and picture work but with some issues: - Sometimes picture is noisy, but it becomes crystal clear after switching between channels. (happens for example at 687.25 Mhz) - On a lower frequency (511.25 Mhz) the picture is always sharp, but lacks colour. - No sound problems. - radio untested. Digital: - DVB-T/H stream reception works. - Would expect to see some more channels in the higher frequency region. Overall is the impression that sensitivity still needs improvement both in analog and digital modes. If you look at the dmesg, analog tuner is detected as 8290 instead of the expected 8295 could this be a problem? [280192.420033] tda829x 3-004b: type set to tda8290+18271 For information on the card see: http://linuxtv.org/wiki/index.php/Zolid_Hybrid_TV_Tuner Signed-off-by: henk.vergo...@gmail.com Henk, Why do you expect a 8295? If your board uses the SAA7131, then we would expect an 8290 IF demod. Ah, I just checked the history of this email thread -- I must have read one of your previous emails too quickly. :-) Perhaps there is a typo in the document that you read -- tda8290 is correct. About the analog noise and quality issues that you report, perhaps there is some tweaking that can be done to help the situation. I dont have that Zolid board, myself, so I can't reallt help much in that respect, unfortunately. At this point, I feel that your patch is fine to merge into the development repository, although I have some small cleanup requests: #1) You can omit this line from the tda18271_config struct: .config = 0, /* no AGC config */ This is not necessary, as it is initialized at zero and this serves no purpose even for documentation's sake. #2) The configuration inside saa7134-cards.c should be moved to the end of the boards array. #3) The configuration case inside saa7134-dvb.c should be moved to the end of the switch..case block. I'll wait for these cleanups, then I have no issue pushing up your patch. Any quality improvements that we find along the way can certainly be added afterwards. Good work. Regards, Mike -- To unsubscribe from this list: send the line unsubscribe linux-media in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: [PATCH] Add support for Zolid Hybrid PCI card
Hmm gmail front-end encoded the attachment as binary, retry
- snip -
This patch adds support for Zolid Hybrid TV card. The results are
pretty encouraging DVB reception and analog TV reception are confirmed
to work. Might still need to find the GPIO pin that switches AGC on
the TDA18271 for even better reception.
see:
http://linuxtv.org/wiki/index.php/Zolid_Hybrid_TV_Tuner
for more information.
Signed-off-by: henk.vergo...@gmail.com
diff -r 2b49813f8482 linux/drivers/media/video/saa7134/saa7134-cards.c
--- a/linux/drivers/media/video/saa7134/saa7134-cards.c Thu Sep 03 09:06:34
2009 -0300
+++ b/linux/drivers/media/video/saa7134/saa7134-cards.c Mon Sep 07 00:16:24
2009 +0200
@@ -3521,6 +3521,35 @@
.gpio = 0x0800100, /* GPIO 23 HI for FM */
},
},
+ [SAA7134_BOARD_ZOLID_HYBRID_PCI] = {
+ .name = NXP Europa DVB-T hybrid reference design,
+ .audio_clock= 0x00187de7,
+ .tuner_type = TUNER_PHILIPS_TDA8290,
+ .radio_type = UNSET,
+ .tuner_addr = ADDR_UNSET,
+ .radio_addr = ADDR_UNSET,
+ .tuner_config = 3,
+ .mpeg = SAA7134_MPEG_DVB,
+ .ts_type= SAA7134_MPEG_TS_PARALLEL,
+ .inputs = {{
+ .name = name_tv,
+ .vmux = 1,
+ .amux = TV,
+ .tv = 1,
+ }, {
+ .name = name_comp1,
+ .vmux = 0,
+ .amux = LINE1,
+ }, {
+ .name = name_svideo,
+ .vmux = 6,
+ .amux = LINE1,
+ } },
+ .radio = {
+ .name = name_radio,
+ .amux = TV,
+ },
+ },
[SAA7134_BOARD_CINERGY_HT_PCMCIA] = {
.name = Terratec Cinergy HT PCMCIA,
.audio_clock= 0x00187de7,
@@ -6429,6 +6458,12 @@
.subdevice= 0x0138, /* LifeView FlyTV Prime30 OEM */
.driver_data = SAA7134_BOARD_ROVERMEDIA_LINK_PRO_FM,
}, {
+ .vendor = PCI_VENDOR_ID_PHILIPS,
+ .device = PCI_DEVICE_ID_PHILIPS_SAA7133,
+ .subvendor= PCI_VENDOR_ID_PHILIPS,
+ .subdevice= 0x2004,
+ .driver_data = SAA7134_BOARD_ZOLID_HYBRID_PCI,
+ }, {
/* --- boards without eeprom + subsystem ID --- */
.vendor = PCI_VENDOR_ID_PHILIPS,
.device = PCI_DEVICE_ID_PHILIPS_SAA7134,
@@ -6655,6 +6690,7 @@
switch (dev-board) {
case SAA7134_BOARD_HAUPPAUGE_HVR1150:
case SAA7134_BOARD_HAUPPAUGE_HVR1120:
+ case SAA7134_BOARD_ZOLID_HYBRID_PCI:
/* tda8290 + tda18271 */
ret = saa7134_tda8290_18271_callback(dev, command, arg);
break;
diff -r 2b49813f8482 linux/drivers/media/video/saa7134/saa7134-dvb.c
--- a/linux/drivers/media/video/saa7134/saa7134-dvb.c Thu Sep 03 09:06:34
2009 -0300
+++ b/linux/drivers/media/video/saa7134/saa7134-dvb.c Mon Sep 07 00:16:24
2009 +0200
@@ -1125,6 +1125,13 @@
goto dettach_frontend;
break;
case SAA7134_BOARD_HAUPPAUGE_HVR1120:
+ case SAA7134_BOARD_ZOLID_HYBRID_PCI:
+ /* match interface type of SAA713x and TDA10048 */
+if (saa7134_boards[dev-board].ts_type ==
SAA7134_MPEG_TS_PARALLEL) {
+ hcw_tda10048_config.output_mode =
TDA10048_PARALLEL_OUTPUT;
+ } else {
+ hcw_tda10048_config.output_mode =
TDA10048_SERIAL_OUTPUT;
+ }
fe0-dvb.frontend = dvb_attach(tda10048_attach,
hcw_tda10048_config,
dev-i2c_adap);
diff -r 2b49813f8482 linux/drivers/media/video/saa7134/saa7134.h
--- a/linux/drivers/media/video/saa7134/saa7134.h Thu Sep 03 09:06:34
2009 -0300
+++ b/linux/drivers/media/video/saa7134/saa7134.h Mon Sep 07 00:16:24
2009 +0200
@@ -297,6 +297,7 @@
#define SAA7134_BOARD_AVERMEDIA_STUDIO_505 170
#define SAA7134_BOARD_BEHOLD_X7 171
#define SAA7134_BOARD_ROVERMEDIA_LINK_PRO_FM 172
+#define SAA7134_BOARD_ZOLID_HYBRID_PCI 173
#define SAA7134_MAXBOARDS 32
#define SAA7134_INPUT_MAX 8
Re: [PATCH] Add support for Zolid Hybrid PCI card
On Mon, Sep 7, 2009 at 8:49 AM, s...@systol-ng.god.lan wrote: Hmm gmail front-end encoded the attachment as binary, retry - snip - This patch adds support for Zolid Hybrid TV card. The results are pretty encouraging DVB reception and analog TV reception are confirmed to work. Might still need to find the GPIO pin that switches AGC on the TDA18271 for even better reception. see: http://linuxtv.org/wiki/index.php/Zolid_Hybrid_TV_Tuner for more information. Signed-off-by: henk.vergo...@gmail.com Henk, thanks for your contribution, but this patch has problems. This should NOT be merged as it is here. Please see below: #1) It's just a copy of the HVR1120 configuration. There tuner_config = 3 value is definitely wrong for your board. To prove my point, notice that you added a case for your board to the switch..case block in saa7134_tda8290_callback. This will cause saa7134_tda8290_18271_callback to get called, then the default case will do nothing and the entire thing was a no-op. The correct value for your board for tuner_config is 0. Always try the defaults before blindly copying somebody else's configuration. #2) Card description reads, NXP Europa DVB-T hybrid reference design but the card ID is SAA7134_BOARD_ZOLID_HYBRID_PCI. I suggest to pick one name for the sake of clarity, specifically, the actual board name. Feel free to indicate that it is based on a reference design in comments. #3) The change in saa7134-dvb will prevent an HVR1120 and your Zolid board from working together in the same PC. Please create a new case block for the Zolid board, and create a new configuration structure for the tda10048 -- do not edit the value of static structures on-the-fly, and dont alter configuration of cards other than that of the board that you are adding today. #4) Does your card have a saa7131 on it or some other saa713x variant? Is there actually a tda8290 present on the board? Does the tda8290_attach function sucess or fail? Please send in a dmesg snippit of the board functioning with your next patch. #5) Aren't there multiple versions of this board using different steppings of the tda18271 tuner? This I am not sure of, but I do recall having issues bringing up the Zolid board months ago -- is this actually working for you? After you resubmit a cleaned up patch, we should see if anybody else out there can test this for you. A dmesg snippit of the board's driver output would be nice. Cheers, Mike -- To unsubscribe from this list: send the line unsubscribe linux-media in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: [PATCH] Add support for Zolid Hybrid PCI card
On Mon, Sep 07, 2009 at 10:18:46AM -0400, Michael Krufky wrote: This patch adds support for Zolid Hybrid TV card. The results are pretty encouraging DVB reception and analog TV reception are confirmed to work. Might still need to find the GPIO pin that switches AGC on the TDA18271 for even better reception. see: http://linuxtv.org/wiki/index.php/Zolid_Hybrid_TV_Tuner for more information. Signed-off-by: henk.vergo...@gmail.com Henk, thanks for your contribution, but this patch has problems. This should NOT be merged as it is here. Please see below: Thanks for the review. #1) It's just a copy of the HVR1120 configuration. There tuner_config = 3 value is definitely wrong for your board. To prove my point, notice that you added a case for your board to the switch..case block in saa7134_tda8290_callback. This will cause saa7134_tda8290_18271_callback to get called, then the default case will do nothing and the entire thing was a no-op. The correct value for your board for tuner_config is 0. Always try the defaults before blindly copying somebody else's configuration. You're right, changed tuner_config to zero. #2) Card description reads, NXP Europa DVB-T hybrid reference design but the card ID is SAA7134_BOARD_ZOLID_HYBRID_PCI. I suggest to pick one name for the sake of clarity, specifically, the actual board name. Feel free to indicate that it is based on a reference design in comments. Fair enough. #3) The change in saa7134-dvb will prevent an HVR1120 and your Zolid board from working together in the same PC. Please create a new case block for the Zolid board, and create a new configuration structure for the tda10048 -- do not edit the value of static structures on-the-fly, and dont alter configuration of cards other than that of the board that you are adding today. Ok I was assuming configuration parameters get copied in the tuner state. #4) Does your card have a saa7131 on it or some other saa713x variant? Is there actually a tda8290 present on the board? Does the tda8290_attach function sucess or fail? Please send in a dmesg snippit of the board functioning with your next patch. Well the chip is labeled as SAA7131E/03/G, according to the NXP docs its a SAA7135 combined with a TDA8295 analog IF demod. dmesg is attached below. #5) Aren't there multiple versions of this board using different steppings of the tda18271 tuner? This I am not sure of, but I do recall having issues bringing up the Zolid board months ago -- is this actually working for you? Well all the references on the net refer to a tda18271/C2 version. I have tested dvb reception just now, with a good antenna, and it works get good audio and video. I still need to test analog reception. Also I assume selectivity can be better as I assume the V_AGC pin of the TDA18271 is connected to some GPIO pin. After you resubmit a cleaned up patch, we should see if anybody else out there can test this for you. A dmesg snippit of the board's driver output would be nice. Cheers, Mike Can you take a peek at the improved patch below? dmesg: [280156.190062] saa7130/34: v4l2 driver version 0.2.15 loaded [280156.190234] saa7133[0]: found at :04:00.0, rev: 209, irq: 16, latency: 64, mmio: 0xfebff800 [280156.190271] saa7133[0]: subsystem: 1131:2004, board: Zolid Hybrid TV Tuner PCI [card=173,autodetected] [280156.190445] saa7133[0]: board init: gpio is 400100 [280156.190481] IRQ 16/saa7133[0]: IRQF_DISABLED is not guaranteed on shared IRQs [280156.372530] saa7133[0]: i2c eeprom 00: 31 11 04 20 54 20 1c 00 43 43 a9 1c 55 d2 b2 92 [280156.372579] saa7133[0]: i2c eeprom 10: 00 ff 86 0f ff 20 ff ff ff ff ff ff ff ff ff ff [280156.372622] saa7133[0]: i2c eeprom 20: 01 40 01 02 03 01 01 03 08 ff 00 b2 ff ff ff ff [280156.372664] saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [280156.372715] saa7133[0]: i2c eeprom 40: ff 35 00 c0 96 10 03 32 21 05 ff ff ff ff ff ff [280156.372758] saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [280156.372800] saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [280156.372842] saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [280156.372885] saa7133[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [280156.372927] saa7133[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [280156.372969] saa7133[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [280156.373012] saa7133[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [280156.373054] saa7133[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [280156.373097] saa7133[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [280156.373139] saa7133[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [280156.373181] saa7133[0]: i2c eeprom f0: ff ff ff ff ff
Re: [PATCH] Add support for Zolid Hybrid PCI card
On Mon, Sep 7, 2009 at 11:18 AM, s...@systol-ng.god.lan wrote: On Mon, Sep 07, 2009 at 10:18:46AM -0400, Michael Krufky wrote: This patch adds support for Zolid Hybrid TV card. The results are pretty encouraging DVB reception and analog TV reception are confirmed to work. Might still need to find the GPIO pin that switches AGC on the TDA18271 for even better reception. see: http://linuxtv.org/wiki/index.php/Zolid_Hybrid_TV_Tuner for more information. Signed-off-by: henk.vergo...@gmail.com Henk, thanks for your contribution, but this patch has problems. This should NOT be merged as it is here. Please see below: Thanks for the review. #1) It's just a copy of the HVR1120 configuration. There tuner_config = 3 value is definitely wrong for your board. To prove my point, notice that you added a case for your board to the switch..case block in saa7134_tda8290_callback. This will cause saa7134_tda8290_18271_callback to get called, then the default case will do nothing and the entire thing was a no-op. The correct value for your board for tuner_config is 0. Always try the defaults before blindly copying somebody else's configuration. You're right, changed tuner_config to zero. #2) Card description reads, NXP Europa DVB-T hybrid reference design but the card ID is SAA7134_BOARD_ZOLID_HYBRID_PCI. I suggest to pick one name for the sake of clarity, specifically, the actual board name. Feel free to indicate that it is based on a reference design in comments. Fair enough. #3) The change in saa7134-dvb will prevent an HVR1120 and your Zolid board from working together in the same PC. Please create a new case block for the Zolid board, and create a new configuration structure for the tda10048 -- do not edit the value of static structures on-the-fly, and dont alter configuration of cards other than that of the board that you are adding today. Ok I was assuming configuration parameters get copied in the tuner state. #4) Does your card have a saa7131 on it or some other saa713x variant? Is there actually a tda8290 present on the board? Does the tda8290_attach function sucess or fail? Please send in a dmesg snippit of the board functioning with your next patch. Well the chip is labeled as SAA7131E/03/G, according to the NXP docs its a SAA7135 combined with a TDA8295 analog IF demod. dmesg is attached below. #5) Aren't there multiple versions of this board using different steppings of the tda18271 tuner? This I am not sure of, but I do recall having issues bringing up the Zolid board months ago -- is this actually working for you? Well all the references on the net refer to a tda18271/C2 version. I have tested dvb reception just now, with a good antenna, and it works get good audio and video. I still need to test analog reception. Also I assume selectivity can be better as I assume the V_AGC pin of the TDA18271 is connected to some GPIO pin. After you resubmit a cleaned up patch, we should see if anybody else out there can test this for you. A dmesg snippit of the board's driver output would be nice. Cheers, Mike Can you take a peek at the improved patch below? dmesg: [280156.190062] saa7130/34: v4l2 driver version 0.2.15 loaded [280156.190234] saa7133[0]: found at :04:00.0, rev: 209, irq: 16, latency: 64, mmio: 0xfebff800 [280156.190271] saa7133[0]: subsystem: 1131:2004, board: Zolid Hybrid TV Tuner PCI [card=173,autodetected] [280156.190445] saa7133[0]: board init: gpio is 400100 [280156.190481] IRQ 16/saa7133[0]: IRQF_DISABLED is not guaranteed on shared IRQs [280156.372530] saa7133[0]: i2c eeprom 00: 31 11 04 20 54 20 1c 00 43 43 a9 1c 55 d2 b2 92 [280156.372579] saa7133[0]: i2c eeprom 10: 00 ff 86 0f ff 20 ff ff ff ff ff ff ff ff ff ff [280156.372622] saa7133[0]: i2c eeprom 20: 01 40 01 02 03 01 01 03 08 ff 00 b2 ff ff ff ff [280156.372664] saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [280156.372715] saa7133[0]: i2c eeprom 40: ff 35 00 c0 96 10 03 32 21 05 ff ff ff ff ff ff [280156.372758] saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [280156.372800] saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [280156.372842] saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [280156.372885] saa7133[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [280156.372927] saa7133[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [280156.372969] saa7133[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [280156.373012] saa7133[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [280156.373054] saa7133[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [280156.373097] saa7133[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [280156.373139] saa7133[0]: i2c eeprom e0: ff
