Re: [linux-dvb] Help Request: DM1105 STV0299 DVB-S PCI - Unable to tune
Hi, Thanks for the help so far. I did a hg clone of the latest v4l-dvb repository, built, installed, rebooted a few times, and did the modprobe below, but unfortunately I still can't lock: Here's the scan output: $ sudo ../scan -vvv test scanning test using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' initial transponder 1122 H 2750 2 tune to: 11220:h:0:27500 DiSEqC: switch pos 0, 18V, loband (index 1) diseqc_send_msg:59: DiSEqC: e0 10 38 f2 00 00 tuning status == 0x03 tuning status == 0x03 tuning status == 0x03 tuning status == 0x03 tuning status == 0x03 tuning status == 0x03 tuning status == 0x03 tuning status == 0x03 tuning status == 0x03 tuning status == 0x03 WARNING: tuning failed!!! tune to: 11220:h:0:27500 (tuning failed) Interestingly, since changing the drivers, the STV0299 is mapping against a weird frontend: [ 12.633254] DVB: registering adapter 0 frontend 28036848 (ST STV0299 DVB-S)... Could this be a problem? Thanks, Shaun 2009/7/26 Igor M. Liplianin liplia...@me.by: On 26 июля 2009 01:12:14 Shaun Murdoch wrote: Hi Igor, I've taken some photos of the tuner so that hopefully you'll be able to help work out why it won't tune in Linux. Please see the following link for the images: http://www.flickr.com/photos/7690...@n04/sets/72157621703527801/ I have a few dm1105 based cards, but yours looks different from mine. The only chip on display is: SDMC DM1105N D735 E280034 Please try recent v4l-dvb, as I've commited some change. Now You can try modprobe dm1105 card=1 Also - I tested the card in a Windows box today, so I am now certain that both the card and the satellite connection are OK. The settings that work with Windows (frequency, etc), don't lock in Linux. (I do get a good signal reading in Kaffeine that is the same as Windows gives, but no lock.) I hope this will help you work out what is wrong. Thanks! Shaun 2009/7/22 Igor M. Liplianin liplia...@me.by: On 22 июля 2009 21:43:01 Shaun Murdoch wrote: Hi, Thanks for the suggestion. I think there's something a bit weird with dvbtune. According to it's man page the units for frequency (-f) are Hz. I am trying to tell it 11.778 GHz - but you get errors if you do -f 1177800. Equally you also get errors if you assume it is MHz, i.e. -f 11778. Anyway, if it prints FE_HAS_SIGNAL and FE_HAS_CARRIER that must mean the frequency I gave it is OK? In any case, scan doesn't work, nor does Kaffeine, so I don't think it's that my use of dvbtune is wrong. Anyone got any other suggestions on what I can do to get this to lock? Thanks, Shaun 2009/7/22 Seyyed Mohammad mohammadzadeh softnhard...@gmail.com: Hello, I don't know what is the exact cause of your problem but I think you are tuning to a wrong frequency. You wrote: dvbtune -f 1177800 -s 27500 -p v -m in which the frequency parameters has two extra zeros which cause the frequency to interpret as : 1,177,800 MHz !!! 2009/7/22 Shaun Murdoch scra...@gmail.com Hi everyone, First post so please be gentle :-) I was wondering if anyone can help me please - I am trying to get a DVB-S PCI card working with Linux (Ubuntu 9.04). So far I can get the card recognised by Linux, but it won't tune - Kaffeine does tell me that there is 95% signal and 80% SNR, and I am using the same frequencies etc that a standard Sky box uses. The card is very common on eBay so I am sure there are plenty people who have tried this / would want this working. Some details that I hope will help someone who knows more than I do about this! The card is one of these: http://cgi.ebay.co.uk/DVB-S-Satellite-TV-Tuner-Video-Capture-PCI-Card -Re mote_W0QQitemZ130314645048QQcmdZViewItemQQptZUK_Computing_Computer_Co mpon ents_Graphics_Video_TV_Cards_TW?hash=item1e575bae38_trksid=p3286.c0. m14 _trkparms=65:12|66:2|39:1|72:1690|293:1|294:50 lspci: 03:09.0 Ethernet controller: Device 195d:1105 (rev 10) My dmesg output - looks ok?: $ dmesg | grep DVB [ 12.174738] DVB: registering new adapter (dm1105) [ 12.839501] DVB: registering adapter 0 frontend 0 (ST STV0299 DVB-S)... [ 12.839633] input: DVB on-card IR receiver as /devices/pci:00/:00:1e.0/:03:09.0/input/input My output from scan - the problem: $ sudo scan -vv /usr/share/dvb/dvb-s/Astra-28.2E scanning /usr/share/dvb/dvb-s/Astra-28.2E using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' tune to: 11778:v:0:27500 DiSEqC: switch pos 0, 13V, hiband (index 2) diseqc_send_msg:56: DiSEqC: e0 10 38 f1 00 00 DVB-S IF freq is 1178000 tuning status == 0x03 tuning status == 0x03 tuning status == 0x03 tuning status == 0x03 tuning status == 0x03 tuning status == 0x03 tuning status == 0x03 tuning status == 0x03 tuning status == 0x03 tuning status == 0x03
Re: [linux-dvb] Help Request: DM1105 STV0299 DVB-S PCI - Unable to tune
On 26 июля 2009 01:12:14 Shaun Murdoch wrote: Hi Igor, I've taken some photos of the tuner so that hopefully you'll be able to help work out why it won't tune in Linux. Please see the following link for the images: http://www.flickr.com/photos/7690...@n04/sets/72157621703527801/ I have a few dm1105 based cards, but yours looks different from mine. The only chip on display is: SDMC DM1105N D735 E280034 Please try recent v4l-dvb, as I've commited some change. Now You can try modprobe dm1105 card=1 Also - I tested the card in a Windows box today, so I am now certain that both the card and the satellite connection are OK. The settings that work with Windows (frequency, etc), don't lock in Linux. (I do get a good signal reading in Kaffeine that is the same as Windows gives, but no lock.) I hope this will help you work out what is wrong. Thanks! Shaun 2009/7/22 Igor M. Liplianin liplia...@me.by: On 22 июля 2009 21:43:01 Shaun Murdoch wrote: Hi, Thanks for the suggestion. I think there's something a bit weird with dvbtune. According to it's man page the units for frequency (-f) are Hz. I am trying to tell it 11.778 GHz - but you get errors if you do -f 1177800. Equally you also get errors if you assume it is MHz, i.e. -f 11778. Anyway, if it prints FE_HAS_SIGNAL and FE_HAS_CARRIER that must mean the frequency I gave it is OK? In any case, scan doesn't work, nor does Kaffeine, so I don't think it's that my use of dvbtune is wrong. Anyone got any other suggestions on what I can do to get this to lock? Thanks, Shaun 2009/7/22 Seyyed Mohammad mohammadzadeh softnhard...@gmail.com: Hello, I don't know what is the exact cause of your problem but I think you are tuning to a wrong frequency. You wrote: dvbtune -f 1177800 -s 27500 -p v -m in which the frequency parameters has two extra zeros which cause the frequency to interpret as : 1,177,800 MHz !!! 2009/7/22 Shaun Murdoch scra...@gmail.com Hi everyone, First post so please be gentle :-) I was wondering if anyone can help me please - I am trying to get a DVB-S PCI card working with Linux (Ubuntu 9.04). So far I can get the card recognised by Linux, but it won't tune - Kaffeine does tell me that there is 95% signal and 80% SNR, and I am using the same frequencies etc that a standard Sky box uses. The card is very common on eBay so I am sure there are plenty people who have tried this / would want this working. Some details that I hope will help someone who knows more than I do about this! The card is one of these: http://cgi.ebay.co.uk/DVB-S-Satellite-TV-Tuner-Video-Capture-PCI-Card -Re mote_W0QQitemZ130314645048QQcmdZViewItemQQptZUK_Computing_Computer_Co mpon ents_Graphics_Video_TV_Cards_TW?hash=item1e575bae38_trksid=p3286.c0. m14 _trkparms=65:12|66:2|39:1|72:1690|293:1|294:50 lspci: 03:09.0 Ethernet controller: Device 195d:1105 (rev 10) My dmesg output - looks ok?: $ dmesg | grep DVB [ 12.174738] DVB: registering new adapter (dm1105) [ 12.839501] DVB: registering adapter 0 frontend 0 (ST STV0299 DVB-S)... [ 12.839633] input: DVB on-card IR receiver as /devices/pci:00/:00:1e.0/:03:09.0/input/input My output from scan - the problem: $ sudo scan -vv /usr/share/dvb/dvb-s/Astra-28.2E scanning /usr/share/dvb/dvb-s/Astra-28.2E using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' tune to: 11778:v:0:27500 DiSEqC: switch pos 0, 13V, hiband (index 2) diseqc_send_msg:56: DiSEqC: e0 10 38 f1 00 00 DVB-S IF freq is 1178000 tuning status == 0x03 tuning status == 0x03 tuning status == 0x03 tuning status == 0x03 tuning status == 0x03 tuning status == 0x03 tuning status == 0x03 tuning status == 0x03 tuning status == 0x03 tuning status == 0x03 WARNING: tuning failed!!! This is the correct satellite for my location (south UK), I believe. Have tried plenty. Nothing locks. I'm using the latest liplianin drivers - did a mercurial checkout and build today: $ modinfo dm1105 filename: /lib/modules/2.6.28-13-server/kernel/drivers/media/dvb/dm1105/dm1105. ko license:GPL description:SDMC DM1105 DVB driver author: Igor M. Liplianin liplia...@me.by srcversion: 46C1B3C3627D1937F75D732 alias: pci:v195Dd1105sv*sd*bc*sc*i* alias: pci:v109Fd036Fsv*sd*bc*sc*i* depends:ir-common,dvb-core vermagic: 2.6.28-13-server SMP mod_unload modversions parm: card:card type (array of int) parm: ir_debug:enable debugging information for IR decoding (int) parm: adapter_nr:DVB adapter numbers (array of short) Have also tried the latest v4l-dvb drivers and get exactly the same tuning problems. Finally, dvbtune appears to say I have signal but
Re: [linux-dvb] Help Request: DM1105 STV0299 DVB-S PCI - Unable to tune
Hi Igor, I've taken some photos of the tuner so that hopefully you'll be able to help work out why it won't tune in Linux. Please see the following link for the images: http://www.flickr.com/photos/7690...@n04/sets/72157621703527801/ The only chip on display is: SDMC DM1105N D735 E280034 Also - I tested the card in a Windows box today, so I am now certain that both the card and the satellite connection are OK. The settings that work with Windows (frequency, etc), don't lock in Linux. (I do get a good signal reading in Kaffeine that is the same as Windows gives, but no lock.) I hope this will help you work out what is wrong. Thanks! Shaun 2009/7/22 Igor M. Liplianin liplia...@me.by: On 22 июля 2009 21:43:01 Shaun Murdoch wrote: Hi, Thanks for the suggestion. I think there's something a bit weird with dvbtune. According to it's man page the units for frequency (-f) are Hz. I am trying to tell it 11.778 GHz - but you get errors if you do -f 1177800. Equally you also get errors if you assume it is MHz, i.e. -f 11778. Anyway, if it prints FE_HAS_SIGNAL and FE_HAS_CARRIER that must mean the frequency I gave it is OK? In any case, scan doesn't work, nor does Kaffeine, so I don't think it's that my use of dvbtune is wrong. Anyone got any other suggestions on what I can do to get this to lock? Thanks, Shaun 2009/7/22 Seyyed Mohammad mohammadzadeh softnhard...@gmail.com: Hello, I don't know what is the exact cause of your problem but I think you are tuning to a wrong frequency. You wrote: dvbtune -f 1177800 -s 27500 -p v -m in which the frequency parameters has two extra zeros which cause the frequency to interpret as : 1,177,800 MHz !!! 2009/7/22 Shaun Murdoch scra...@gmail.com Hi everyone, First post so please be gentle :-) I was wondering if anyone can help me please - I am trying to get a DVB-S PCI card working with Linux (Ubuntu 9.04). So far I can get the card recognised by Linux, but it won't tune - Kaffeine does tell me that there is 95% signal and 80% SNR, and I am using the same frequencies etc that a standard Sky box uses. The card is very common on eBay so I am sure there are plenty people who have tried this / would want this working. Some details that I hope will help someone who knows more than I do about this! The card is one of these: http://cgi.ebay.co.uk/DVB-S-Satellite-TV-Tuner-Video-Capture-PCI-Card-Re mote_W0QQitemZ130314645048QQcmdZViewItemQQptZUK_Computing_Computer_Compon ents_Graphics_Video_TV_Cards_TW?hash=item1e575bae38_trksid=p3286.c0.m14 _trkparms=65:12|66:2|39:1|72:1690|293:1|294:50 lspci: 03:09.0 Ethernet controller: Device 195d:1105 (rev 10) My dmesg output - looks ok?: $ dmesg | grep DVB [ 12.174738] DVB: registering new adapter (dm1105) [ 12.839501] DVB: registering adapter 0 frontend 0 (ST STV0299 DVB-S)... [ 12.839633] input: DVB on-card IR receiver as /devices/pci:00/:00:1e.0/:03:09.0/input/input My output from scan - the problem: $ sudo scan -vv /usr/share/dvb/dvb-s/Astra-28.2E scanning /usr/share/dvb/dvb-s/Astra-28.2E using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' tune to: 11778:v:0:27500 DiSEqC: switch pos 0, 13V, hiband (index 2) diseqc_send_msg:56: DiSEqC: e0 10 38 f1 00 00 DVB-S IF freq is 1178000 tuning status == 0x03 tuning status == 0x03 tuning status == 0x03 tuning status == 0x03 tuning status == 0x03 tuning status == 0x03 tuning status == 0x03 tuning status == 0x03 tuning status == 0x03 tuning status == 0x03 WARNING: tuning failed!!! This is the correct satellite for my location (south UK), I believe. Have tried plenty. Nothing locks. I'm using the latest liplianin drivers - did a mercurial checkout and build today: $ modinfo dm1105 filename: /lib/modules/2.6.28-13-server/kernel/drivers/media/dvb/dm1105/dm1105.ko license: GPL description: SDMC DM1105 DVB driver author: Igor M. Liplianin liplia...@me.by srcversion: 46C1B3C3627D1937F75D732 alias: pci:v195Dd1105sv*sd*bc*sc*i* alias: pci:v109Fd036Fsv*sd*bc*sc*i* depends: ir-common,dvb-core vermagic: 2.6.28-13-server SMP mod_unload modversions parm: card:card type (array of int) parm: ir_debug:enable debugging information for IR decoding (int) parm: adapter_nr:DVB adapter numbers (array of short) Have also tried the latest v4l-dvb drivers and get exactly the same tuning problems. Finally, dvbtune appears to say I have signal but cannot lock: $ sudo dvbtune -f 1177800 -s 27500 -p v -m -tone 1 -vvv [sudo] password for shaun: Using DVB card ST STV0299 DVB-S tuning DVB-S to L-Band:0, Pol:V Srate=2750, 22kHz=on polling Getting frontend event FE_STATUS: polling Getting frontend event FE_STATUS: FE_HAS_SIGNAL FE_HAS_CARRIER FE_HAS_VITERBI
Re: [linux-dvb] Help Request: DM1105 STV0299 DVB-S PCI - Unable to tune
Shaun Murdoch wrote: Hi everyone, First post so please be gentle :-) I was wondering if anyone can help me please - I am trying to get a DVB-S PCI card working with Linux (Ubuntu 9.04). So far I can get the card recognised by Linux, but it won't tune - Kaffeine does tell me that there is 95% signal and 80% SNR, and I am using the same frequencies etc that a standard Sky box uses. The card is very common on eBay so I am sure there are plenty people who have tried this / would want this working. Some details that I hope will help someone who knows more than I do about this! The card is one of these: http://cgi.ebay.co.uk/DVB-S-Satellite-TV-Tuner-Video-Capture-PCI-Card-Remote_W0QQitemZ130314645048QQcmdZViewItemQQptZUK_Computing_Computer_Components_Graphics_Video_TV_Cards_TW?hash=item1e575bae38_trksid=p3286.c0.m14_trkparms=65:12|66:2|39:1|72:1690|293:1|294:50 http://cgi.ebay.co.uk/DVB-S-Satellite-TV-Tuner-Video-Capture-PCI-Card-Remote_W0QQitemZ130314645048QQcmdZViewItemQQptZUK_Computing_Computer_Components_Graphics_Video_TV_Cards_TW?hash=item1e575bae38_trksid=p3286.c0.m14_trkparms=65:12%7C66:2%7C39:1%7C72:1690%7C293:1%7C294:50 lspci: 03:09.0 Ethernet controller: Device 195d:1105 (rev 10) My dmesg output - looks ok?: $ dmesg | grep DVB [ 12.174738] DVB: registering new adapter (dm1105) [ 12.839501] DVB: registering adapter 0 frontend 0 (ST STV0299 DVB-S)... [ 12.839633] input: DVB on-card IR receiver as /devices/pci:00/:00:1e.0/:03:09.0/input/input My output from scan -* the problem*: $ sudo scan -vv /usr/share/dvb/dvb-s/Astra-28.2E scanning /usr/share/dvb/dvb-s/Astra-28.2E using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' tune to: 11778:v:0:27500 DiSEqC: switch pos 0, 13V, hiband (index 2) diseqc_send_msg:56: DiSEqC: e0 10 38 f1 00 00 DVB-S IF freq is 1178000 tuning status == 0x03 tuning status == 0x03 tuning status == 0x03 tuning status == 0x03 tuning status == 0x03 tuning status == 0x03 tuning status == 0x03 tuning status == 0x03 tuning status == 0x03 tuning status == 0x03 WARNING: tuning failed!!! /This is the correct satellite for my location (south UK), I believe. Have tried plenty. Nothing locks./ I'm using the latest liplianin drivers - did a mercurial checkout and build today: $ modinfo dm1105 filename: /lib/modules/2.6.28-13-server/kernel/drivers/media/dvb/dm1105/dm1105.ko license:GPL description:SDMC DM1105 DVB driver author: Igor M. Liplianin liplia...@me.by mailto:liplia...@me.by srcversion: 46C1B3C3627D1937F75D732 alias: pci:v195Dd1105sv*sd*bc*sc*i* alias: pci:v109Fd036Fsv*sd*bc*sc*i* depends:ir-common,dvb-core vermagic: 2.6.28-13-server SMP mod_unload modversions parm: card:card type (array of int) parm: ir_debug:enable debugging information for IR decoding (int) parm: adapter_nr:DVB adapter numbers (array of short) Have also tried the latest v4l-dvb drivers and get exactly the same tuning problems. Finally, dvbtune appears to say I have signal but cannot lock: $ sudo dvbtune -f 1177800 -s 27500 -p v -m -tone 1 -vvv [sudo] password for shaun: Using DVB card ST STV0299 DVB-S tuning DVB-S to L-Band:0, Pol:V Srate=2750, 22kHz=on polling Getting frontend event FE_STATUS: polling Getting frontend event FE_STATUS: FE_HAS_SIGNAL FE_HAS_CARRIER FE_HAS_VITERBI polling Getting frontend event FE_STATUS: FE_HAS_SIGNAL FE_HAS_CARRIER polling Getting frontend event FE_STATUS: FE_HAS_SIGNAL FE_HAS_CARRIER FE_HAS_VITERBI polling Getting frontend event FE_STATUS: FE_HAS_SIGNAL FE_HAS_CARRIER polling Getting frontend event FE_STATUS: *FE_HAS_SIGNAL FE_HAS_CARRIER* FE_HAS_VITERBI polling Getting frontend event FE_STATUS: FE_HAS_SIGNAL FE_HAS_CARRIER So I am thinking that this could be a driver issue? If the card has good signal and SNR in Kaffeine, and dvbtune says it has signal and carrier - but cannot lock? Please can someone help me debug this? Thanks a lot! Shaun i have a few and they work fine in my small little way i helped to get them to work in fact i tried to import a bulk shipment from china - but they offered the same price for 200 as i can get on ebay - so i didn't bother are you sure the signal is good? have you tried with another card to check? -- simon -- To unsubscribe from this list: send the line unsubscribe linux-media in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: [linux-dvb] Help Request: DM1105 STV0299 DVB-S PCI - Unable to tune
Thanks Simon - did you need to do anything special to get them to work, or did they work out of the box with the latest s2-liplianin / v4l-dvb drivers? I've not tried another card (don't have one), but I did try a set-top box which works fine - and let me get the frequency/lnb/etc info. 2009/7/23 Simon Kenyon si...@koala.ie: Shaun Murdoch wrote: Hi everyone, First post so please be gentle :-) I was wondering if anyone can help me please - I am trying to get a DVB-S PCI card working with Linux (Ubuntu 9.04). So far I can get the card recognised by Linux, but it won't tune - Kaffeine does tell me that there is 95% signal and 80% SNR, and I am using the same frequencies etc that a standard Sky box uses. The card is very common on eBay so I am sure there are plenty people who have tried this / would want this working. Some details that I hope will help someone who knows more than I do about this! The card is one of these: http://cgi.ebay.co.uk/DVB-S-Satellite-TV-Tuner-Video-Capture-PCI-Card-Remote_W0QQitemZ130314645048QQcmdZViewItemQQptZUK_Computing_Computer_Components_Graphics_Video_TV_Cards_TW?hash=item1e575bae38_trksid=p3286.c0.m14_trkparms=65:12|66:2|39:1|72:1690|293:1|294:50 http://cgi.ebay.co.uk/DVB-S-Satellite-TV-Tuner-Video-Capture-PCI-Card-Remote_W0QQitemZ130314645048QQcmdZViewItemQQptZUK_Computing_Computer_Components_Graphics_Video_TV_Cards_TW?hash=item1e575bae38_trksid=p3286.c0.m14_trkparms=65:12%7C66:2%7C39:1%7C72:1690%7C293:1%7C294:50 lspci: 03:09.0 Ethernet controller: Device 195d:1105 (rev 10) My dmesg output - looks ok?: $ dmesg | grep DVB [ 12.174738] DVB: registering new adapter (dm1105) [ 12.839501] DVB: registering adapter 0 frontend 0 (ST STV0299 DVB-S)... [ 12.839633] input: DVB on-card IR receiver as /devices/pci:00/:00:1e.0/:03:09.0/input/input My output from scan -* the problem*: $ sudo scan -vv /usr/share/dvb/dvb-s/Astra-28.2E scanning /usr/share/dvb/dvb-s/Astra-28.2E using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' tune to: 11778:v:0:27500 DiSEqC: switch pos 0, 13V, hiband (index 2) diseqc_send_msg:56: DiSEqC: e0 10 38 f1 00 00 DVB-S IF freq is 1178000 tuning status == 0x03 tuning status == 0x03 tuning status == 0x03 tuning status == 0x03 tuning status == 0x03 tuning status == 0x03 tuning status == 0x03 tuning status == 0x03 tuning status == 0x03 tuning status == 0x03 WARNING: tuning failed!!! /This is the correct satellite for my location (south UK), I believe. Have tried plenty. Nothing locks./ I'm using the latest liplianin drivers - did a mercurial checkout and build today: $ modinfo dm1105 filename: /lib/modules/2.6.28-13-server/kernel/drivers/media/dvb/dm1105/dm1105.ko license: GPL description: SDMC DM1105 DVB driver author: Igor M. Liplianin liplia...@me.by mailto:liplia...@me.by srcversion: 46C1B3C3627D1937F75D732 alias: pci:v195Dd1105sv*sd*bc*sc*i* alias: pci:v109Fd036Fsv*sd*bc*sc*i* depends: ir-common,dvb-core vermagic: 2.6.28-13-server SMP mod_unload modversions parm: card:card type (array of int) parm: ir_debug:enable debugging information for IR decoding (int) parm: adapter_nr:DVB adapter numbers (array of short) Have also tried the latest v4l-dvb drivers and get exactly the same tuning problems. Finally, dvbtune appears to say I have signal but cannot lock: $ sudo dvbtune -f 1177800 -s 27500 -p v -m -tone 1 -vvv [sudo] password for shaun: Using DVB card ST STV0299 DVB-S tuning DVB-S to L-Band:0, Pol:V Srate=2750, 22kHz=on polling Getting frontend event FE_STATUS: polling Getting frontend event FE_STATUS: FE_HAS_SIGNAL FE_HAS_CARRIER FE_HAS_VITERBI polling Getting frontend event FE_STATUS: FE_HAS_SIGNAL FE_HAS_CARRIER polling Getting frontend event FE_STATUS: FE_HAS_SIGNAL FE_HAS_CARRIER FE_HAS_VITERBI polling Getting frontend event FE_STATUS: FE_HAS_SIGNAL FE_HAS_CARRIER polling Getting frontend event FE_STATUS: *FE_HAS_SIGNAL FE_HAS_CARRIER* FE_HAS_VITERBI polling Getting frontend event FE_STATUS: FE_HAS_SIGNAL FE_HAS_CARRIER So I am thinking that this could be a driver issue? If the card has good signal and SNR in Kaffeine, and dvbtune says it has signal and carrier - but cannot lock? Please can someone help me debug this? Thanks a lot! Shaun i have a few and they work fine in my small little way i helped to get them to work in fact i tried to import a bulk shipment from china - but they offered the same price for 200 as i can get on ebay - so i didn't bother are you sure the signal is good? have you tried with another card to check? -- simon -- To unsubscribe from this list: send the line unsubscribe linux-media in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe
Re: [linux-dvb] Help Request: DM1105 STV0299 DVB-S PCI - Unable to tune
Hello, I don't know what is the exact cause of your problem but I think you are tuning to a wrong frequency. You wrote: dvbtune -f 1177800 -s 27500 -p v -m in which the frequency parameters has two extra zeros which cause the frequency to interpret as : 1,177,800 MHz !!! 2009/7/22 Shaun Murdoch scra...@gmail.com Hi everyone, First post so please be gentle :-) I was wondering if anyone can help me please - I am trying to get a DVB-S PCI card working with Linux (Ubuntu 9.04). So far I can get the card recognised by Linux, but it won't tune - Kaffeine does tell me that there is 95% signal and 80% SNR, and I am using the same frequencies etc that a standard Sky box uses. The card is very common on eBay so I am sure there are plenty people who have tried this / would want this working. Some details that I hope will help someone who knows more than I do about this! The card is one of these: http://cgi.ebay.co.uk/DVB-S-Satellite-TV-Tuner-Video-Capture-PCI-Card-Remote_W0QQitemZ130314645048QQcmdZViewItemQQptZUK_Computing_Computer_Components_Graphics_Video_TV_Cards_TW?hash=item1e575bae38_trksid=p3286.c0.m14_trkparms=65:12|66:2|39:1|72:1690|293:1|294:50 lspci: 03:09.0 Ethernet controller: Device 195d:1105 (rev 10) My dmesg output - looks ok?: $ dmesg | grep DVB [ 12.174738] DVB: registering new adapter (dm1105) [ 12.839501] DVB: registering adapter 0 frontend 0 (ST STV0299 DVB-S)... [ 12.839633] input: DVB on-card IR receiver as /devices/pci:00/:00:1e.0/:03:09.0/input/input My output from scan - the problem: $ sudo scan -vv /usr/share/dvb/dvb-s/Astra-28.2E scanning /usr/share/dvb/dvb-s/Astra-28.2E using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' tune to: 11778:v:0:27500 DiSEqC: switch pos 0, 13V, hiband (index 2) diseqc_send_msg:56: DiSEqC: e0 10 38 f1 00 00 DVB-S IF freq is 1178000 tuning status == 0x03 tuning status == 0x03 tuning status == 0x03 tuning status == 0x03 tuning status == 0x03 tuning status == 0x03 tuning status == 0x03 tuning status == 0x03 tuning status == 0x03 tuning status == 0x03 WARNING: tuning failed!!! This is the correct satellite for my location (south UK), I believe. Have tried plenty. Nothing locks. I'm using the latest liplianin drivers - did a mercurial checkout and build today: $ modinfo dm1105 filename: /lib/modules/2.6.28-13-server/kernel/drivers/media/dvb/dm1105/dm1105.ko license:GPL description:SDMC DM1105 DVB driver author: Igor M. Liplianin liplia...@me.by srcversion: 46C1B3C3627D1937F75D732 alias: pci:v195Dd1105sv*sd*bc*sc*i* alias: pci:v109Fd036Fsv*sd*bc*sc*i* depends:ir-common,dvb-core vermagic: 2.6.28-13-server SMP mod_unload modversions parm: card:card type (array of int) parm: ir_debug:enable debugging information for IR decoding (int) parm: adapter_nr:DVB adapter numbers (array of short) Have also tried the latest v4l-dvb drivers and get exactly the same tuning problems. Finally, dvbtune appears to say I have signal but cannot lock: $ sudo dvbtune -f 1177800 -s 27500 -p v -m -tone 1 -vvv [sudo] password for shaun: Using DVB card ST STV0299 DVB-S tuning DVB-S to L-Band:0, Pol:V Srate=2750, 22kHz=on polling Getting frontend event FE_STATUS: polling Getting frontend event FE_STATUS: FE_HAS_SIGNAL FE_HAS_CARRIER FE_HAS_VITERBI polling Getting frontend event FE_STATUS: FE_HAS_SIGNAL FE_HAS_CARRIER polling Getting frontend event FE_STATUS: FE_HAS_SIGNAL FE_HAS_CARRIER FE_HAS_VITERBI polling Getting frontend event FE_STATUS: FE_HAS_SIGNAL FE_HAS_CARRIER polling Getting frontend event FE_STATUS: FE_HAS_SIGNAL FE_HAS_CARRIER FE_HAS_VITERBI polling Getting frontend event FE_STATUS: FE_HAS_SIGNAL FE_HAS_CARRIER So I am thinking that this could be a driver issue? If the card has good signal and SNR in Kaffeine, and dvbtune says it has signal and carrier - but cannot lock? Please can someone help me debug this? Thanks a lot! Shaun ___ linux-dvb users mailing list For V4L/DVB development, please use instead linux-media@vger.kernel.org linux-...@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb -- To unsubscribe from this list: send the line unsubscribe linux-media in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: [linux-dvb] Help Request: DM1105 STV0299 DVB-S PCI - Unable to tune
Hi, Thanks for the suggestion. I think there's something a bit weird with dvbtune. According to it's man page the units for frequency (-f) are Hz. I am trying to tell it 11.778 GHz - but you get errors if you do -f 1177800. Equally you also get errors if you assume it is MHz, i.e. -f 11778. Anyway, if it prints FE_HAS_SIGNAL and FE_HAS_CARRIER that must mean the frequency I gave it is OK? In any case, scan doesn't work, nor does Kaffeine, so I don't think it's that my use of dvbtune is wrong. Anyone got any other suggestions on what I can do to get this to lock? Thanks, Shaun 2009/7/22 Seyyed Mohammad mohammadzadeh softnhard...@gmail.com: Hello, I don't know what is the exact cause of your problem but I think you are tuning to a wrong frequency. You wrote: dvbtune -f 1177800 -s 27500 -p v -m in which the frequency parameters has two extra zeros which cause the frequency to interpret as : 1,177,800 MHz !!! 2009/7/22 Shaun Murdoch scra...@gmail.com Hi everyone, First post so please be gentle :-) I was wondering if anyone can help me please - I am trying to get a DVB-S PCI card working with Linux (Ubuntu 9.04). So far I can get the card recognised by Linux, but it won't tune - Kaffeine does tell me that there is 95% signal and 80% SNR, and I am using the same frequencies etc that a standard Sky box uses. The card is very common on eBay so I am sure there are plenty people who have tried this / would want this working. Some details that I hope will help someone who knows more than I do about this! The card is one of these: http://cgi.ebay.co.uk/DVB-S-Satellite-TV-Tuner-Video-Capture-PCI-Card-Remote_W0QQitemZ130314645048QQcmdZViewItemQQptZUK_Computing_Computer_Components_Graphics_Video_TV_Cards_TW?hash=item1e575bae38_trksid=p3286.c0.m14_trkparms=65:12|66:2|39:1|72:1690|293:1|294:50 lspci: 03:09.0 Ethernet controller: Device 195d:1105 (rev 10) My dmesg output - looks ok?: $ dmesg | grep DVB [ 12.174738] DVB: registering new adapter (dm1105) [ 12.839501] DVB: registering adapter 0 frontend 0 (ST STV0299 DVB-S)... [ 12.839633] input: DVB on-card IR receiver as /devices/pci:00/:00:1e.0/:03:09.0/input/input My output from scan - the problem: $ sudo scan -vv /usr/share/dvb/dvb-s/Astra-28.2E scanning /usr/share/dvb/dvb-s/Astra-28.2E using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' tune to: 11778:v:0:27500 DiSEqC: switch pos 0, 13V, hiband (index 2) diseqc_send_msg:56: DiSEqC: e0 10 38 f1 00 00 DVB-S IF freq is 1178000 tuning status == 0x03 tuning status == 0x03 tuning status == 0x03 tuning status == 0x03 tuning status == 0x03 tuning status == 0x03 tuning status == 0x03 tuning status == 0x03 tuning status == 0x03 tuning status == 0x03 WARNING: tuning failed!!! This is the correct satellite for my location (south UK), I believe. Have tried plenty. Nothing locks. I'm using the latest liplianin drivers - did a mercurial checkout and build today: $ modinfo dm1105 filename: /lib/modules/2.6.28-13-server/kernel/drivers/media/dvb/dm1105/dm1105.ko license: GPL description: SDMC DM1105 DVB driver author: Igor M. Liplianin liplia...@me.by srcversion: 46C1B3C3627D1937F75D732 alias: pci:v195Dd1105sv*sd*bc*sc*i* alias: pci:v109Fd036Fsv*sd*bc*sc*i* depends: ir-common,dvb-core vermagic: 2.6.28-13-server SMP mod_unload modversions parm: card:card type (array of int) parm: ir_debug:enable debugging information for IR decoding (int) parm: adapter_nr:DVB adapter numbers (array of short) Have also tried the latest v4l-dvb drivers and get exactly the same tuning problems. Finally, dvbtune appears to say I have signal but cannot lock: $ sudo dvbtune -f 1177800 -s 27500 -p v -m -tone 1 -vvv [sudo] password for shaun: Using DVB card ST STV0299 DVB-S tuning DVB-S to L-Band:0, Pol:V Srate=2750, 22kHz=on polling Getting frontend event FE_STATUS: polling Getting frontend event FE_STATUS: FE_HAS_SIGNAL FE_HAS_CARRIER FE_HAS_VITERBI polling Getting frontend event FE_STATUS: FE_HAS_SIGNAL FE_HAS_CARRIER polling Getting frontend event FE_STATUS: FE_HAS_SIGNAL FE_HAS_CARRIER FE_HAS_VITERBI polling Getting frontend event FE_STATUS: FE_HAS_SIGNAL FE_HAS_CARRIER polling Getting frontend event FE_STATUS: FE_HAS_SIGNAL FE_HAS_CARRIER FE_HAS_VITERBI polling Getting frontend event FE_STATUS: FE_HAS_SIGNAL FE_HAS_CARRIER So I am thinking that this could be a driver issue? If the card has good signal and SNR in Kaffeine, and dvbtune says it has signal and carrier - but cannot lock? Please can someone help me debug this? Thanks a lot! Shaun ___ linux-dvb users mailing list For V4L/DVB development, please use instead linux-media@vger.kernel.org linux-...@linuxtv.org
Re: [linux-dvb] Help Request: DM1105 STV0299 DVB-S PCI - Unable to tune
On 22 июля 2009 21:43:01 Shaun Murdoch wrote: Hi, Thanks for the suggestion. I think there's something a bit weird with dvbtune. According to it's man page the units for frequency (-f) are Hz. I am trying to tell it 11.778 GHz - but you get errors if you do -f 1177800. Equally you also get errors if you assume it is MHz, i.e. -f 11778. Anyway, if it prints FE_HAS_SIGNAL and FE_HAS_CARRIER that must mean the frequency I gave it is OK? In any case, scan doesn't work, nor does Kaffeine, so I don't think it's that my use of dvbtune is wrong. Anyone got any other suggestions on what I can do to get this to lock? Thanks, Shaun 2009/7/22 Seyyed Mohammad mohammadzadeh softnhard...@gmail.com: Hello, I don't know what is the exact cause of your problem but I think you are tuning to a wrong frequency. You wrote: dvbtune -f 1177800 -s 27500 -p v -m in which the frequency parameters has two extra zeros which cause the frequency to interpret as : 1,177,800 MHz !!! 2009/7/22 Shaun Murdoch scra...@gmail.com Hi everyone, First post so please be gentle :-) I was wondering if anyone can help me please - I am trying to get a DVB-S PCI card working with Linux (Ubuntu 9.04). So far I can get the card recognised by Linux, but it won't tune - Kaffeine does tell me that there is 95% signal and 80% SNR, and I am using the same frequencies etc that a standard Sky box uses. The card is very common on eBay so I am sure there are plenty people who have tried this / would want this working. Some details that I hope will help someone who knows more than I do about this! The card is one of these: http://cgi.ebay.co.uk/DVB-S-Satellite-TV-Tuner-Video-Capture-PCI-Card-Re mote_W0QQitemZ130314645048QQcmdZViewItemQQptZUK_Computing_Computer_Compon ents_Graphics_Video_TV_Cards_TW?hash=item1e575bae38_trksid=p3286.c0.m14 _trkparms=65:12|66:2|39:1|72:1690|293:1|294:50 lspci: 03:09.0 Ethernet controller: Device 195d:1105 (rev 10) My dmesg output - looks ok?: $ dmesg | grep DVB [ 12.174738] DVB: registering new adapter (dm1105) [ 12.839501] DVB: registering adapter 0 frontend 0 (ST STV0299 DVB-S)... [ 12.839633] input: DVB on-card IR receiver as /devices/pci:00/:00:1e.0/:03:09.0/input/input My output from scan - the problem: $ sudo scan -vv /usr/share/dvb/dvb-s/Astra-28.2E scanning /usr/share/dvb/dvb-s/Astra-28.2E using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' tune to: 11778:v:0:27500 DiSEqC: switch pos 0, 13V, hiband (index 2) diseqc_send_msg:56: DiSEqC: e0 10 38 f1 00 00 DVB-S IF freq is 1178000 tuning status == 0x03 tuning status == 0x03 tuning status == 0x03 tuning status == 0x03 tuning status == 0x03 tuning status == 0x03 tuning status == 0x03 tuning status == 0x03 tuning status == 0x03 tuning status == 0x03 WARNING: tuning failed!!! This is the correct satellite for my location (south UK), I believe. Have tried plenty. Nothing locks. I'm using the latest liplianin drivers - did a mercurial checkout and build today: $ modinfo dm1105 filename: /lib/modules/2.6.28-13-server/kernel/drivers/media/dvb/dm1105/dm1105.ko license:GPL description:SDMC DM1105 DVB driver author: Igor M. Liplianin liplia...@me.by srcversion: 46C1B3C3627D1937F75D732 alias: pci:v195Dd1105sv*sd*bc*sc*i* alias: pci:v109Fd036Fsv*sd*bc*sc*i* depends:ir-common,dvb-core vermagic: 2.6.28-13-server SMP mod_unload modversions parm: card:card type (array of int) parm: ir_debug:enable debugging information for IR decoding (int) parm: adapter_nr:DVB adapter numbers (array of short) Have also tried the latest v4l-dvb drivers and get exactly the same tuning problems. Finally, dvbtune appears to say I have signal but cannot lock: $ sudo dvbtune -f 1177800 -s 27500 -p v -m -tone 1 -vvv [sudo] password for shaun: Using DVB card ST STV0299 DVB-S tuning DVB-S to L-Band:0, Pol:V Srate=2750, 22kHz=on polling Getting frontend event FE_STATUS: polling Getting frontend event FE_STATUS: FE_HAS_SIGNAL FE_HAS_CARRIER FE_HAS_VITERBI polling Getting frontend event FE_STATUS: FE_HAS_SIGNAL FE_HAS_CARRIER polling Getting frontend event FE_STATUS: FE_HAS_SIGNAL FE_HAS_CARRIER FE_HAS_VITERBI polling Getting frontend event FE_STATUS: FE_HAS_SIGNAL FE_HAS_CARRIER polling Getting frontend event FE_STATUS: FE_HAS_SIGNAL FE_HAS_CARRIER FE_HAS_VITERBI polling Getting frontend event FE_STATUS: FE_HAS_SIGNAL FE_HAS_CARRIER So I am thinking that this could be a driver issue? If the card has good signal and SNR in Kaffeine, and dvbtune says it has signal and carrier - but cannot lock? Please can someone help me debug this? Thanks a lot! Shaun
Re: [linux-dvb] Help Request: DM1105 STV0299 DVB-S PCI - Unable to tune
Hi Igor, Thanks - I will take the card out and get some pics. Cheers, Shaun 2009/7/22 Igor M. Liplianin liplia...@me.by: On 22 июля 2009 21:43:01 Shaun Murdoch wrote: Hi, Thanks for the suggestion. I think there's something a bit weird with dvbtune. According to it's man page the units for frequency (-f) are Hz. I am trying to tell it 11.778 GHz - but you get errors if you do -f 1177800. Equally you also get errors if you assume it is MHz, i.e. -f 11778. Anyway, if it prints FE_HAS_SIGNAL and FE_HAS_CARRIER that must mean the frequency I gave it is OK? In any case, scan doesn't work, nor does Kaffeine, so I don't think it's that my use of dvbtune is wrong. Anyone got any other suggestions on what I can do to get this to lock? Thanks, Shaun 2009/7/22 Seyyed Mohammad mohammadzadeh softnhard...@gmail.com: Hello, I don't know what is the exact cause of your problem but I think you are tuning to a wrong frequency. You wrote: dvbtune -f 1177800 -s 27500 -p v -m in which the frequency parameters has two extra zeros which cause the frequency to interpret as : 1,177,800 MHz !!! 2009/7/22 Shaun Murdoch scra...@gmail.com Hi everyone, First post so please be gentle :-) I was wondering if anyone can help me please - I am trying to get a DVB-S PCI card working with Linux (Ubuntu 9.04). So far I can get the card recognised by Linux, but it won't tune - Kaffeine does tell me that there is 95% signal and 80% SNR, and I am using the same frequencies etc that a standard Sky box uses. The card is very common on eBay so I am sure there are plenty people who have tried this / would want this working. Some details that I hope will help someone who knows more than I do about this! The card is one of these: http://cgi.ebay.co.uk/DVB-S-Satellite-TV-Tuner-Video-Capture-PCI-Card-Re mote_W0QQitemZ130314645048QQcmdZViewItemQQptZUK_Computing_Computer_Compon ents_Graphics_Video_TV_Cards_TW?hash=item1e575bae38_trksid=p3286.c0.m14 _trkparms=65:12|66:2|39:1|72:1690|293:1|294:50 lspci: 03:09.0 Ethernet controller: Device 195d:1105 (rev 10) My dmesg output - looks ok?: $ dmesg | grep DVB [ 12.174738] DVB: registering new adapter (dm1105) [ 12.839501] DVB: registering adapter 0 frontend 0 (ST STV0299 DVB-S)... [ 12.839633] input: DVB on-card IR receiver as /devices/pci:00/:00:1e.0/:03:09.0/input/input My output from scan - the problem: $ sudo scan -vv /usr/share/dvb/dvb-s/Astra-28.2E scanning /usr/share/dvb/dvb-s/Astra-28.2E using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' tune to: 11778:v:0:27500 DiSEqC: switch pos 0, 13V, hiband (index 2) diseqc_send_msg:56: DiSEqC: e0 10 38 f1 00 00 DVB-S IF freq is 1178000 tuning status == 0x03 tuning status == 0x03 tuning status == 0x03 tuning status == 0x03 tuning status == 0x03 tuning status == 0x03 tuning status == 0x03 tuning status == 0x03 tuning status == 0x03 tuning status == 0x03 WARNING: tuning failed!!! This is the correct satellite for my location (south UK), I believe. Have tried plenty. Nothing locks. I'm using the latest liplianin drivers - did a mercurial checkout and build today: $ modinfo dm1105 filename: /lib/modules/2.6.28-13-server/kernel/drivers/media/dvb/dm1105/dm1105.ko license: GPL description: SDMC DM1105 DVB driver author: Igor M. Liplianin liplia...@me.by srcversion: 46C1B3C3627D1937F75D732 alias: pci:v195Dd1105sv*sd*bc*sc*i* alias: pci:v109Fd036Fsv*sd*bc*sc*i* depends: ir-common,dvb-core vermagic: 2.6.28-13-server SMP mod_unload modversions parm: card:card type (array of int) parm: ir_debug:enable debugging information for IR decoding (int) parm: adapter_nr:DVB adapter numbers (array of short) Have also tried the latest v4l-dvb drivers and get exactly the same tuning problems. Finally, dvbtune appears to say I have signal but cannot lock: $ sudo dvbtune -f 1177800 -s 27500 -p v -m -tone 1 -vvv [sudo] password for shaun: Using DVB card ST STV0299 DVB-S tuning DVB-S to L-Band:0, Pol:V Srate=2750, 22kHz=on polling Getting frontend event FE_STATUS: polling Getting frontend event FE_STATUS: FE_HAS_SIGNAL FE_HAS_CARRIER FE_HAS_VITERBI polling Getting frontend event FE_STATUS: FE_HAS_SIGNAL FE_HAS_CARRIER polling Getting frontend event FE_STATUS: FE_HAS_SIGNAL FE_HAS_CARRIER FE_HAS_VITERBI polling Getting frontend event FE_STATUS: FE_HAS_SIGNAL FE_HAS_CARRIER polling Getting frontend event FE_STATUS: FE_HAS_SIGNAL FE_HAS_CARRIER FE_HAS_VITERBI polling Getting frontend event FE_STATUS: FE_HAS_SIGNAL FE_HAS_CARRIER So I am thinking that this could be a driver issue? If the card has good signal and SNR in Kaffeine, and dvbtune says it has signal and
