On Mon, Mar 25, 2013 at 8:12 PM, Timo Teras timo.te...@iki.fi wrote:
Seems that USBPcap needs compiling and TESTSIGNING enabled - so I'd
rather avoid it.
Since USBPcap 1.0.0.3 release there is digitally signed driver and
installer available.
--
To unsubscribe from this list: send the line
On Fri, May 03, 2013 at 08:47:55AM +0300, Timo Teras wrote:
On Thu, 2 May 2013 10:04:56 +0300
Timo Teras timo.te...@iki.fi wrote:
On Wed, 1 May 2013 19:11:53 +0200
Jon Arne Jørgensen jona...@jonarne.no wrote:
On Thu, Mar 28, 2013 at 04:54:59PM +0200, Timo Teras wrote:
On Thu, 28
Hi Jon,
On Fri, May 03, 2013 at 11:13:17AM +0200, Jon Arne Jørgensen wrote:
[...]
I've tested the changes, and it doesn't seem to break/change the smi2021
driver.
I'll append this to the pending saa7115 patch and ask Ezequiel Garcia to check
that the change doesn't break the stk1160
On Wed, 1 May 2013 19:11:53 +0200
Jon Arne Jørgensen jona...@jonarne.no wrote:
On Thu, Mar 28, 2013 at 04:54:59PM +0200, Timo Teras wrote:
On Thu, 28 Mar 2013 15:35:56 +0200
Timo Teras timo.te...@iki.fi wrote:
On Thu, 28 Mar 2013 09:40:52 -0300
Mauro Carvalho Chehab
On Thu, 2 May 2013 10:04:56 +0300
Timo Teras timo.te...@iki.fi wrote:
On Wed, 1 May 2013 19:11:53 +0200
Jon Arne Jørgensen jona...@jonarne.no wrote:
On Thu, Mar 28, 2013 at 04:54:59PM +0200, Timo Teras wrote:
On Thu, 28 Mar 2013 15:35:56 +0200
Timo Teras timo.te...@iki.fi wrote:
On Mon, 29 Apr 2013 15:26:18 +0300
Timo Teras timo.te...@iki.fi wrote:
When comparing these two picture, you see that the frame is offset
with one or two pixels in x-direction. Perhaps this is a byte
offset, and in RGB format causes color values to be connected to
wrong pixel.
On Thu, Mar 28, 2013 at 04:54:59PM +0200, Timo Teras wrote:
On Thu, 28 Mar 2013 15:35:56 +0200
Timo Teras timo.te...@iki.fi wrote:
On Thu, 28 Mar 2013 09:40:52 -0300
Mauro Carvalho Chehab mche...@redhat.com wrote:
Em Thu, 28 Mar 2013 10:52:01 +0200
Timo Teras timo.te...@iki.fi
On Fri, 05 Apr 2013 17:33:07 +0200
Frank Schäfer fschaefer@googlemail.com wrote:
Am 03.04.2013 10:27, schrieb Timo Teras:
I did not test VBI, so I'm unsure if it works or not.
The em2860 supports VBI, so VBI mode is used.
You can force the normal mode with module parameter
Am 03.04.2013 10:27, schrieb Timo Teras:
On Tue, 02 Apr 2013 18:39:25 +0200
Frank Schäfer fschaefer@googlemail.com wrote:
Am 02.04.2013 07:43, schrieb Timo Teras:
On Mon, 01 Apr 2013 19:26:53 +0200
Frank Schäfer fschaefer@googlemail.com wrote:
Am 30.03.2013 10:54, schrieb Timo
On Tue, 02 Apr 2013 18:39:25 +0200
Frank Schäfer fschaefer@googlemail.com wrote:
Am 02.04.2013 07:43, schrieb Timo Teras:
On Mon, 01 Apr 2013 19:26:53 +0200
Frank Schäfer fschaefer@googlemail.com wrote:
Am 30.03.2013 10:54, schrieb Timo Teras:
On Thu, 28 Mar 2013 12:22:52 -0300
Am 02.04.2013 07:43, schrieb Timo Teras:
On Mon, 01 Apr 2013 19:26:53 +0200
Frank Schäfer fschaefer@googlemail.com wrote:
Am 30.03.2013 10:54, schrieb Timo Teras:
On Thu, 28 Mar 2013 12:22:52 -0300
Mauro Carvalho Chehab mche...@redhat.com wrote:
On the W7 driver, I don't get any of the
Am 30.03.2013 10:54, schrieb Timo Teras:
On Thu, 28 Mar 2013 12:22:52 -0300
Mauro Carvalho Chehab mche...@redhat.com wrote:
On the W7 driver, I don't get any of the above mentioned problems.
I looked at the saa7113 register init sequence, and copied that
over to linux saa7113 init, but that
On Mon, 01 Apr 2013 19:26:53 +0200
Frank Schäfer fschaefer@googlemail.com wrote:
Am 30.03.2013 10:54, schrieb Timo Teras:
On Thu, 28 Mar 2013 12:22:52 -0300
Mauro Carvalho Chehab mche...@redhat.com wrote:
On the W7 driver, I don't get any of the above mentioned problems.
I looked
On Thu, 28 Mar 2013 12:22:52 -0300
Mauro Carvalho Chehab mche...@redhat.com wrote:
On the W7 driver, I don't get any of the above mentioned problems.
I looked at the saa7113 register init sequence, and copied that
over to linux saa7113 init, but that did not remove the problems.
There
On Wed, 27 Mar 2013 16:10:49 +0200
Timo Teras timo.te...@iki.fi wrote:
On Tue, 26 Mar 2013 10:20:56 +0200
Timo Teras timo.te...@iki.fi wrote:
I did manage to get decent traces with USBlyzer evaluation version.
Nothing _that_ exciting there. Though, there's quite a bit of
differences on
Em Thu, 28 Mar 2013 10:52:01 +0200
Timo Teras timo.te...@iki.fi escreveu:
On Wed, 27 Mar 2013 16:10:49 +0200
Timo Teras timo.te...@iki.fi wrote:
On Tue, 26 Mar 2013 10:20:56 +0200
Timo Teras timo.te...@iki.fi wrote:
I did manage to get decent traces with USBlyzer evaluation version.
On Thu, 28 Mar 2013 09:40:52 -0300
Mauro Carvalho Chehab mche...@redhat.com wrote:
Em Thu, 28 Mar 2013 10:52:01 +0200
Timo Teras timo.te...@iki.fi escreveu:
On Wed, 27 Mar 2013 16:10:49 +0200
Timo Teras timo.te...@iki.fi wrote:
On Tue, 26 Mar 2013 10:20:56 +0200
Timo Teras
On Thu, 28 Mar 2013 15:35:56 +0200
Timo Teras timo.te...@iki.fi wrote:
On Thu, 28 Mar 2013 09:40:52 -0300
Mauro Carvalho Chehab mche...@redhat.com wrote:
Em Thu, 28 Mar 2013 10:52:01 +0200
Timo Teras timo.te...@iki.fi escreveu:
On Wed, 27 Mar 2013 16:10:49 +0200
Timo Teras
Em Thu, 28 Mar 2013 15:35:56 +0200
Timo Teras timo.te...@iki.fi escreveu:
On Thu, 28 Mar 2013 09:40:52 -0300
Mauro Carvalho Chehab mche...@redhat.com wrote:
Em Thu, 28 Mar 2013 10:52:01 +0200
Timo Teras timo.te...@iki.fi escreveu:
On Wed, 27 Mar 2013 16:10:49 +0200
Timo Teras
On Tue, 26 Mar 2013 10:20:56 +0200
Timo Teras timo.te...@iki.fi wrote:
I did manage to get decent traces with USBlyzer evaluation version.
Nothing _that_ exciting there. Though, there's quite a bit of
differences on certain register writes. I tried copying the changed
parts, but did not really
Am 25.03.2013 18:08, schrieb Timo Teras:
I just bought a Terratec Grabby hardware revision 2 in hopes that it
would work on my linux box.
But alas, I got only sound working. It seems that analog video picture
grabbing does not work.
I tried kernels 3.4.34-grsec, 3.7.1 (vanilla), 3.8.2-grsec
On Wed, 27 Mar 2013 18:37:26 +0100
Frank Schäfer fschaefer@googlemail.com wrote:
Am 25.03.2013 18:08, schrieb Timo Teras:
I just bought a Terratec Grabby hardware revision 2 in hopes that it
would work on my linux box.
But alas, I got only sound working. It seems that analog video
On Wed, 27 Mar 2013 19:57:49 +0200
Timo Teras timo.te...@iki.fi wrote:
The errors are weird. strace gives:
open(/dev/bus/usb/005/028, O_RDONLY) = -1 ENOENT (No such file or
directory) open(/dev/bus/usb/005/028, O_RDONLY) = -1 ENOENT (No
such file or directory)
# ls /dev/bus/usb/005/
Am 27.03.2013 19:04, schrieb Timo Teras:
On Wed, 27 Mar 2013 19:57:49 +0200
Timo Teras timo.te...@iki.fi wrote:
The errors are weird. strace gives:
open(/dev/bus/usb/005/028, O_RDONLY) = -1 ENOENT (No such file or
directory) open(/dev/bus/usb/005/028, O_RDONLY) = -1 ENOENT (No
such file
On Mon, 25 Mar 2013 21:12:38 +0200
Timo Teras timo.te...@iki.fi wrote:
On Mon, 25 Mar 2013 15:32:20 -0300
Mauro Carvalho Chehab mche...@redhat.com wrote:
Em Mon, 25 Mar 2013 19:48:20 +0200
Timo Teras timo.te...@iki.fi escreveu:
On Mon, 25 Mar 2013 14:36:47 -0300
Mauro Carvalho
Em Mon, 25 Mar 2013 19:08:46 +0200
Timo Teras timo.te...@iki.fi escreveu:
I just bought a Terratec Grabby hardware revision 2 in hopes that it
would work on my linux box.
But alas, I got only sound working. It seems that analog video picture
grabbing does not work.
I tried kernels
On Mon, 25 Mar 2013 14:36:47 -0300
Mauro Carvalho Chehab mche...@redhat.com wrote:
Em Mon, 25 Mar 2013 19:08:46 +0200
Timo Teras timo.te...@iki.fi escreveu:
I just bought a Terratec Grabby hardware revision 2 in hopes that it
would work on my linux box.
But alas, I got only sound
Em Mon, 25 Mar 2013 19:48:20 +0200
Timo Teras timo.te...@iki.fi escreveu:
On Mon, 25 Mar 2013 14:36:47 -0300
Mauro Carvalho Chehab mche...@redhat.com wrote:
Em Mon, 25 Mar 2013 19:08:46 +0200
Timo Teras timo.te...@iki.fi escreveu:
I just bought a Terratec Grabby hardware revision 2
On Mon, 25 Mar 2013 15:32:20 -0300
Mauro Carvalho Chehab mche...@redhat.com wrote:
Em Mon, 25 Mar 2013 19:48:20 +0200
Timo Teras timo.te...@iki.fi escreveu:
On Mon, 25 Mar 2013 14:36:47 -0300
Mauro Carvalho Chehab mche...@redhat.com wrote:
Em Mon, 25 Mar 2013 19:08:46 +0200
Timo
29 matches
Mail list logo
