Re: Which modules for the VP-2033? Where is the module mantis.ko?

2010-01-09 Thread Aljaž Prusnik
Hi!

Still no change regarding regaining IR support for VP2040 device.
Despite successfully loading the module from Abraham's tree and starting
the UART, I still do not see the input device that I can use with lirc.

I tried both trees:
today's Liplianin tree, dmesg on loading the mantis module:

ir_common: Unknown symbol ir_g_keycode_from_table
ir_common: Unknown symbol ir_core_debug


today's Abraham's tree, dmesg on loading the mantis modulem verbose=5: 

the result is still the same as the last time I wrote about it (no input
device is registered, despite successful uart initialization).





--
To unsubscribe from this list: send the line unsubscribe linux-media in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html


Re: Which modules for the VP-2033? Where is the module mantis.ko?

2009-12-29 Thread Aljaž Prusnik
On pon, 2009-12-28 at 21:06 +0100, Aljaž Prusnik wrote:
 On pon, 2009-12-28 at 20:28 +0100, Aljaž Prusnik wrote:
  On pon, 2009-12-28 at 02:23 +0400, Manu Abraham wrote:
   Can you please do a lspci -vn for the Mantis card you have ? Also try
   loading the mantis.ko module with verbose=5 module parameter, to get
   more debug information.
  
 
 To continue, it seems the module is registering the remote commands, but
 dunno, why irw shows nothing:

Well - to answer myself on this one, it doesn't because there is no
input device registered. I used to have this under input devices
(cat /proc/bus/input/devices):

I: Bus=0001 Vendor= Product= Version=0001
N: Name=Mantis VP-2040 IR Receiver
P: Phys=pci-:03:06.0/ir0
S: Sysfs=/devices/virtual/input/input5
U: Uniq=
H: Handlers=kbd event5
B: EV=13
B: KEY=108fc330 2842041 0 200018000 21804801
9e96c0 ffc

So the question is, why is it not registered as an input anymore?

Regards,
Aljaz


--
To unsubscribe from this list: send the line unsubscribe linux-media in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html


Re: Which modules for the VP-2033? Where is the module mantis.ko?

2009-12-28 Thread Aljaž Prusnik
On pon, 2009-12-28 at 02:23 +0400, Manu Abraham wrote:
 Can you please do a lspci -vn for the Mantis card you have ? Also try
 loading the mantis.ko module with verbose=5 module parameter, to get
 more debug information.

$ lspci -vn

03:07.0 0480: 1822:4e35 (rev 01)
Subsystem: 1ae4:0002
Flags: bus master, medium devsel, latency 32, IRQ 21
Memory at fdcff000 (32-bit, prefetchable) [size=4K]
Kernel driver in use: Mantis


$ modprobe -v mantis  verbose=5

insmod /lib/modules/2.6.33-rc1/kernel/drivers/media/dvb/mantis/mantis_core.ko 
insmod /lib/modules/2.6.33-rc1/kernel/drivers/media/dvb/mantis/mantis.ko
verbose=5

$ dmesg

[ 2371.762511] Mantis :03:07.0: PCI INT A disabled
[ 2462.703393] Mantis :03:07.0: PCI INT A - GSI 21 (level, low) -
IRQ 21
[ 2462.704761] DVB: registering new adapter (Mantis DVB adapter)
[ 2463.563234] DVB: registering adapter 0 frontend 0 (Philips TDA10023
DVB-C)...
[ 2522.842548] Mantis :03:07.0: PCI INT A disabled
[ 2534.495759] found a VP-2040 PCI DVB-C device on (03:07.0),
[ 2534.495771] Mantis :03:07.0: PCI INT A - GSI 21 (level, low) -
IRQ 21
[ 2534.495796] Mantis Rev 1 [1ae4:0002], irq: 21, latency: 32
[ 2534.495799] memory: 0x0, mmio: 0xc900128cc000
[ 2534.495818] mantis_stream_control (0): Set stream to HIF
[ 2534.495841] mantis_i2c_init (0): Initializing I2C ..
[ 2534.495845] mantis_i2c_init (0): Disabling I2C interrupt
[ 2534.495849] mantis_i2c_xfer (0): Messages:2
[ 2534.495852] mantis_i2c_write: Address=[0x50] W[ 08 ]
[ 2534.496243] mantis_i2c_read:  Address=[0x50] R[ 00 08 c9 d0
02 09 ]
[ 2534.497049] MAC Address=[00:08:c9:d0:02:09]
[ 2534.497051] mantis_dma_init (0): Mantis DMA init
[ 2534.497071] mantis_alloc_buffers (0): DMA=0x3d67
cpu=0x88003d67 size=65536
[ 2534.497073] mantis_alloc_buffers (0): RISC=0x3b731000
cpu=0x88003b731000 size=1000
[ 2534.497076] mantis_calc_lines (0): Mantis RISC block bytes=[4096],
line bytes=[2048], line count=[32]
[ 2534.497077] mantis_dvb_init (0): dvb_register_adapter
[ 2534.497079] DVB: registering new adapter (Mantis DVB adapter)
[ 2534.497081] mantis_dvb_init (0): dvb_dmx_init
[ 2534.497166] mantis_dvb_init (0): dvb_dmxdev_init
[ 2534.497269] mantis_frontend_power (0): Power ON
[ 2534.497271] gpio_set_bits (0): Set Bit 12 to 1
[ 2534.497274] gpio_set_bits (0): GPIO Value 3000
[ 2534.598099] gpio_set_bits (0): Set Bit 12 to 1
[ 2534.598111] gpio_set_bits (0): GPIO Value 3000
[ 2534.699066] mantis_frontend_soft_reset (0): Frontend RESET
[ 2534.699077] gpio_set_bits (0): Set Bit 13 to 0
[ 2534.699085] gpio_set_bits (0): GPIO Value 1000
[ 2534.800077] gpio_set_bits (0): Set Bit 13 to 0
[ 2534.800087] gpio_set_bits (0): GPIO Value 1000
[ 2534.901079] gpio_set_bits (0): Set Bit 13 to 1
[ 2534.901089] gpio_set_bits (0): GPIO Value 3000
[ 2535.002089] gpio_set_bits (0): Set Bit 13 to 1
[ 2535.002099] gpio_set_bits (0): GPIO Value 3000
[ 2535.354084] vp2040_frontend_init (0): Probing for CU1216 (DVB-C)
[ 2535.354096] mantis_i2c_xfer (0): Messages:2
[ 2535.354103] mantis_i2c_write: Address=[0x50] W[ ff ]
[ 2535.354328] mantis_i2c_read:  Address=[0x50] R[ e4 ]
[ 2535.354555] mantis_i2c_xfer (0): Messages:2
[ 2535.354560] mantis_i2c_write: Address=[0x0c] W[ 1a ]
[ 2535.354781] mantis_i2c_read:  Address=[0x0c] R[ 7d ]
[ 2535.355034] mantis_i2c_xfer (0): Messages:2
[ 2535.355039] mantis_i2c_write: Address=[0x50] W[ ff ]
[ 2535.355257] mantis_i2c_read:  Address=[0x50] R[ e4 ]
[ 2535.355482] mantis_i2c_xfer (0): Messages:1
[ 2535.355486] mantis_i2c_write: Address=[0x0c] W[ 00 33 ]
[ 2535.355819] mantis_i2c_xfer (0): Messages:2
[ 2535.355823] mantis_i2c_write: Address=[0x0c] W[ 1a ]
[ 2535.356055] mantis_i2c_read:  Address=[0x0c] R[ 7d ]
[ 2535.356279] vp2040_frontend_init (0): found Philips CU1216 DVB-C
frontend (TDA10023) @ 0x0c
[ 2535.356285] vp2040_frontend_init (0): Mantis DVB-C Philips CU1216
frontend attach success
[ 2535.356291] vp2040_frontend_init (0): Done!
[ 2535.356298] DVB: registering adapter 0 frontend 0 (Philips TDA10023
DVB-C)...
[ 2535.356573] mantis_uart_init (0): Initializing UART @ 9600bps
parity:NONE
[ 2535.356602] mantis_uart_read (0): Reading ... 3f
[ 2535.356609] mantis_uart_work (0): UART BUF:0 3f 
[ 2535.356613] 
[ 2535.356619] mantis_uart_init (0): UART succesfully initialized




--
To unsubscribe from this list: send the line unsubscribe linux-media in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html


Re: Which modules for the VP-2033? Where is the module mantis.ko?

2009-12-28 Thread Aljaž Prusnik
On pon, 2009-12-28 at 20:28 +0100, Aljaž Prusnik wrote:
 On pon, 2009-12-28 at 02:23 +0400, Manu Abraham wrote:
  Can you please do a lspci -vn for the Mantis card you have ? Also try
  loading the mantis.ko module with verbose=5 module parameter, to get
  more debug information.
 

To continue, it seems the module is registering the remote commands, but
dunno, why irw shows nothing:

dmesg of typing on remote:
[ 4854.805594] mantis_uart_read (0): Reading ... 3d
[ 4854.805605] mantis_uart_work (0): UART BUF:0 3d 
[ 4854.805609] 
[ 4854.805615] mantis_uart_read (0): Reading ... 3d
[ 4854.805621] mantis_uart_work (0): UART BUF:0 3d 
[ 4854.805624] 
[ 4895.266923] 
[ 4895.266926] -- Stat=4000800 Mask=800 --IRQ-1
[ 4895.266956] 
[ 4895.266958] -- Stat=4000800 Mask=800 --IRQ-1
[ 4895.266979] 
[ 4895.266981] -- Stat=4000800 Mask=800 --IRQ-1
[ 4895.266999] 
[ 4895.267000] -- Stat=4000800 Mask=800 --IRQ-1
[ 4895.267015] 
[ 4895.267016] -- Stat=4000800 Mask=800 --IRQ-1
[ 4895.267031] 
[ 4895.267032] -- Stat=4000800 Mask=800 --IRQ-1
[ 4895.267043] mantis_uart_read (0): Reading ... 3e
[ 4895.267054] mantis_uart_work (0): UART BUF:0 3e 
[ 4895.267058] 
[ 4895.267065] mantis_uart_read (0): Reading ... 3e
[ 4895.267070] mantis_uart_work (0): UART BUF:0 3e 


--
To unsubscribe from this list: send the line unsubscribe linux-media in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html


Re: Which modules for the VP-2033? Where is the module mantis.ko?

2009-12-27 Thread Manu Abraham
Hello Aljaz,

On Thu, Dec 24, 2009 at 8:51 PM, Aljaž Prusnik prus...@gmail.com wrote:
 On čet, 2009-12-24 at 17:45 +0100, Ruediger Dohmhardt wrote:
 Aljaž, thanks for the reply. As Manu said above there was a build problem.
 As said already in this Thread, I downloaded version 2315248f648c, which
 compiles fine and
 has all modules for the 2033 DVB-C.

 I have the same version and it doesn't work for me. I have a 2040
 module.

Can you please do a lspci -vn for the Mantis card you have ? Also try
loading the mantis.ko module with verbose=5 module parameter, to get
more debug information.

Regards,
Manu
--
To unsubscribe from this list: send the line unsubscribe linux-media in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html


Re: Which modules for the VP-2033? Where is the module mantis.ko?

2009-12-24 Thread Ruediger Dohmhardt
Aljaž Prusnik schrieb:
 On sre, 2009-12-23 at 23:24 +0400, Manu Abraham wrote:
   
 Aljaz, do you have the module mantis.ko?
   
 There was a build issue when i posted the link originally, but it had
 been fixed..

 m...@manu-04:/stor/work/merge/v4l-dvb/v4l ls *.ko |grep mantis
 mantis_core.ko
 mantis.ko

 

 Yup, I have both of them. I just compiled http://jusst.de/hg/v4l-dvb
 again and the result is (depmode -a was run):

 - ir-common.ko is under drivers/media/common (not drivers/media/IR like
 Igor suggested but that is probably because it's a different
 repository).
 - mantis.ko and mantis_core.ko are under drivers/media/dvb/mantis

   
Aljaž, thanks for the reply. As Manu said above there was a build problem.
As said already in this Thread, I downloaded version 2315248f648c, which
compiles fine and
has all modules for the 2033 DVB-C.

Rüdiger


--
To unsubscribe from this list: send the line unsubscribe linux-media in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html


Re: Which modules for the VP-2033? Where is the module mantis.ko?

2009-12-24 Thread Aljaž Prusnik
On čet, 2009-12-24 at 17:45 +0100, Ruediger Dohmhardt wrote:
 Aljaž, thanks for the reply. As Manu said above there was a build problem.
 As said already in this Thread, I downloaded version 2315248f648c, which
 compiles fine and
 has all modules for the 2033 DVB-C.

I have the same version and it doesn't work for me. I have a 2040
module.




--
To unsubscribe from this list: send the line unsubscribe linux-media in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html


Re: Which modules for the VP-2033? Where is the module mantis.ko?

2009-12-23 Thread Aljaž Prusnik
In the same vein, I'm interested in this one, namely:

I have tried the http://jusst.de/hg/v4l-dvb, since recently the
liplianin mantis driver is not working (unknown symbols...). 

However, the problems I have as opposed to the previously working driver
are:
- the module does not install in a way it gets autoloaded on startup - I
have to manually add it (modprobe) or put it into /etc/modules (debian)
- while the card itself works, I don't have IR functionality anymore.
From what I gather from the kernel log, the input line

input: Mantis VP-2040 IR Receiver as /devices/virtual/input/input4

just doesn't exist anymore. Further more the whole bunch is missing:

mantis_ca_init (0): Registering EN50221 device
mantis_ca_init (0): Registered EN50221 device
mantis_hif_init (0): Adapter(0) Initializing Mantis Host Interface
input: Mantis VP-2040 IR Receiver as /devices/virtual/input/input4
Creating IR device irrcv0


I tried 2.6.32 kernel which worked before, now I'm using 2.6.33-rc1
where I had to comment out #include linux/autoconf.h the from the
v4l-dvb/v4l/config-compat.h.


Any ideas how to get the comfort back? ;)

Regards,
Aljaz



--
To unsubscribe from this list: send the line unsubscribe linux-media in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html


Re: Which modules for the VP-2033? Where is the module mantis.ko?

2009-12-23 Thread Igor M. Liplianin
On 23 декабря 2009 16:30:16 Aljaž Prusnik wrote:
 In the same vein, I'm interested in this one, namely:

 I have tried the http://jusst.de/hg/v4l-dvb, since recently the
 liplianin mantis driver is not working (unknown symbols...).

 However, the problems I have as opposed to the previously working driver
 are:
 - the module does not install in a way it gets autoloaded on startup - I
 have to manually add it (modprobe) or put it into /etc/modules (debian)
 - while the card itself works, I don't have IR functionality anymore.

 From what I gather from the kernel log, the input line

 input: Mantis VP-2040 IR Receiver as /devices/virtual/input/input4

 just doesn't exist anymore. Further more the whole bunch is missing:

 mantis_ca_init (0): Registering EN50221 device
 mantis_ca_init (0): Registered EN50221 device
 mantis_hif_init (0): Adapter(0) Initializing Mantis Host Interface
 input: Mantis VP-2040 IR Receiver as /devices/virtual/input/input4
 Creating IR device irrcv0


 I tried 2.6.32 kernel which worked before, now I'm using 2.6.33-rc1
 where I had to comment out #include linux/autoconf.h the from the
 v4l-dvb/v4l/config-compat.h.


 Any ideas how to get the comfort back? ;)

 Regards,
 Aljaz



 --
 To unsubscribe from this list: send the line unsubscribe linux-media in
 the body of a message to majord...@vger.kernel.org
 More majordomo info at  http://vger.kernel.org/majordomo-info.html

Since module ir-common.ko moved to IR directory just remove old one.

rm /lib/modules/$(uname -r)/kernel/drivers/media/common/ir-common.ko

Also it would be good to do

make remove

Then again build and install drivers.

-- 
Igor M. Liplianin
Microsoft Windows Free Zone - Linux used for all Computing Tasks
--
To unsubscribe from this list: send the line unsubscribe linux-media in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html


Re: Which modules for the VP-2033? Where is the module mantis.ko?

2009-12-23 Thread Aljaž Prusnik
On sre, 2009-12-23 at 17:53 +0200, Igor M. Liplianin wrote:
 Since module ir-common.ko moved to IR directory just remove old one.
 
   rm /lib/modules/$(uname -r)/kernel/drivers/media/common/ir-common.ko
 
 Also it would be good to do
 
   make remove
 
 Then again build and install drivers.
 

Ok. There was no common folder in the above path. Anyway, I did rm and
make remove and did a new build (2.6.33-rc1). First, there were
warnings:
WARNING:
ir_input_register [/mnt/storage/temp/technisat/s2-liplianin/v4l/saa7134.ko] 
undefined!
WARNING:
ir_input_unregister [/mnt/storage/temp/technisat/s2-liplianin/v4l/saa7134.ko] 
undefined!
WARNING:
ir_input_register [/mnt/storage/temp/technisat/s2-liplianin/v4l/mantis.ko] 
undefined!
WARNING:
ir_input_register 
[/mnt/storage/temp/technisat/s2-liplianin/v4l/ir-kbd-i2c.ko] undefined!
WARNING:
ir_input_unregister 
[/mnt/storage/temp/technisat/s2-liplianin/v4l/ir-kbd-i2c.ko] undefined!
WARNING:
ir_core_debug [/mnt/storage/temp/technisat/s2-liplianin/v4l/ir-common.ko] 
undefined!
WARNING:
ir_g_keycode_from_table 
[/mnt/storage/temp/technisat/s2-liplianin/v4l/ir-common.ko] undefined!
WARNING:
ir_input_register [/mnt/storage/temp/technisat/s2-liplianin/v4l/em28xx.ko] 
undefined!
WARNING:
ir_input_unregister [/mnt/storage/temp/technisat/s2-liplianin/v4l/em28xx.ko] 
undefined!
WARNING:
ir_input_register [/mnt/storage/temp/technisat/s2-liplianin/v4l/cx88xx.ko] 
undefined!
WARNING:
ir_input_unregister [/mnt/storage/temp/technisat/s2-liplianin/v4l/cx88xx.ko] 
undefined!
WARNING:
ir_input_register [/mnt/storage/temp/technisat/s2-liplianin/v4l/cx23885.ko] 
undefined!
WARNING:
ir_input_unregister [/mnt/storage/temp/technisat/s2-liplianin/v4l/cx23885.ko] 
undefined!
WARNING:
ir_input_register [/mnt/storage/temp/technisat/s2-liplianin/v4l/bttv.ko] 
undefined!
WARNING:
ir_input_unregister [/mnt/storage/temp/technisat/s2-liplianin/v4l/bttv.ko] 
undefined!

Then I restarted the machine and this is in the kernel log:
ir_common: Unknown symbol ir_g_keycode_from_table
ir_common: Unknown symbol ir_core_debug
+ no mantis module loaded.

I have the IR folder under lib/modules where ir-common.ko resides. In
the common folder there is no file ir-common.ko.

If I do manual loading, I get:
sudo modprobe mantis
WARNING: Error inserting mb86a16
(/lib/modules/2.6.33-rc1/kernel/drivers/media/dvb/frontends/mb86a16.ko):
Unknown symbol in module, or unknown parameter (see dmesg)
FATAL: Error inserting mantis
(/lib/modules/2.6.33-rc1/kernel/drivers/media/dvb/mantis/mantis.ko):
Unknown symbol in module, or unknown parameter (see dmesg)

dmesg says:
[  289.939402] ir_common: Unknown symbol ir_g_keycode_from_table
[  289.939690] ir_common: Unknown symbol ir_core_debug


This is the s2-liplianin tree.

If using the http://jusst.de/hg/v4l-dvb tree, everything compiles ok,
module loads, but there is no remote anywhere (there is an IR folder
with the ir-common.ko file, under common there is not).


Aljaz



--
To unsubscribe from this list: send the line unsubscribe linux-media in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html


Re: Which modules for the VP-2033? Where is the module mantis.ko?

2009-12-23 Thread Ruediger Dohmhardt
Aljaž Prusnik schrieb:

 If using the http://jusst.de/hg/v4l-dvb tree, everything compiles ok,
 module loads, but there is no remote anywhere (there is an IR folder
 with the ir-common.ko file, under common there is not).

   
Aljaz, do you have the module mantis.ko?

Ruediger

--
To unsubscribe from this list: send the line unsubscribe linux-media in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html


Re: Which modules for the VP-2033? Where is the module mantis.ko?

2009-12-23 Thread Manu Abraham
Hello Ruediger,

On Wed, Dec 23, 2009 at 11:04 PM, Ruediger Dohmhardt
ruediger.dohmha...@freenet.de wrote:
 Aljaž Prusnik schrieb:

 If using the http://jusst.de/hg/v4l-dvb tree, everything compiles ok,
 module loads, but there is no remote anywhere (there is an IR folder
 with the ir-common.ko file, under common there is not).


 Aljaz, do you have the module mantis.ko?

 Ruediger


There was a build issue when i posted the link originally, but it had
been fixed..

m...@manu-04:/stor/work/merge/v4l-dvb/v4l ls *.ko |grep mantis
mantis_core.ko
mantis.ko


Dec 12 01:18:25 manu-04 kernel: [168362.291827] found a VP-2033 PCI
DVB-C device on (06:01.0),
Dec 12 01:18:25 manu-04 kernel: [168362.291842] Mantis :06:01.0:
PCI INT A - GSI 17 (level, low) - IRQ 17
Dec 12 01:18:25 manu-04 kernel: [168362.291848] Mantis :06:01.0:
enabling bus mastering
Dec 12 01:18:25 manu-04 kernel: [168362.291876] Mantis Rev 1
[1822:0008], irq: 17, latency: 64
Dec 12 01:18:25 manu-04 kernel: [168362.291881] memory: 0x0, mmio:
0xf875e000
Dec 12 01:18:25 manu-04 kernel: [168362.292577] i2c-adapter i2c-7:
adapter [Mantis I2C] registered
Dec 12 01:18:25 manu-04 kernel: [168362.292586] i2c-adapter i2c-7:
master_xfer[0] W, addr=0x50, len=1
Dec 12 01:18:25 manu-04 kernel: [168362.292590] i2c-adapter i2c-7:
master_xfer[1] R, addr=0x50, len=6
Dec 12 01:18:25 manu-04 kernel: [168362.292593]
mantis_i2c_write: Address=[0x50] W[ 08 ]
Dec 12 01:18:25 manu-04 kernel: [168362.292813]
mantis_i2c_read:  Address=[0x50] R[ 00 08 ca 19 ea ee ]
Dec 12 01:18:25 manu-04 kernel: [168362.293539] MAC
Address=[00:08:ca:19:ea:ee]
Dec 12 01:18:25 manu-04 kernel: [168362.293565] mantis_alloc_buffers
(0): DMA=0x2c5 cpu=0xc2c5 size=65536
Dec 12 01:18:25 manu-04 kernel: [168362.293571] mantis_alloc_buffers
(0): RISC=0x31e36000 cpu=0xf1e36000 size=1000
Dec 12 01:18:25 manu-04 kernel: [168362.293575] DVB: registering new
adapter (Mantis DVB adapter)
Dec 12 01:18:26 manu-04 kernel: [168363.172508] vp2033_frontend_init
(0): Probing for CU1216 (DVB-C)
Dec 12 01:18:26 manu-04 kernel: [168363.172515] i2c-adapter i2c-7:
master_xfer[0] W, addr=0x50, len=1
Dec 12 01:18:26 manu-04 kernel: [168363.172519] i2c-adapter i2c-7:
master_xfer[1] R, addr=0x50, len=1
Dec 12 01:18:26 manu-04 kernel: [168363.172522]
mantis_i2c_write: Address=[0x50] W[ ff ]
Dec 12 01:18:26 manu-04 kernel: [168363.172741]
mantis_i2c_read:  Address=[0x50] R[ 22 ]
Dec 12 01:18:26 manu-04 kernel: [168363.172967] i2c-adapter i2c-7:
master_xfer[0] W, addr=0x0c, len=1
Dec 12 01:18:26 manu-04 kernel: [168363.172970] i2c-adapter i2c-7:
master_xfer[1] R, addr=0x0c, len=1
Dec 12 01:18:26 manu-04 kernel: [168363.172973]
mantis_i2c_write: Address=[0x0c] W[ 1a ]
Dec 12 01:18:26 manu-04 kernel: [168363.173194]
mantis_i2c_read:  Address=[0x0c] R[ 7c ]
Dec 12 01:18:26 manu-04 kernel: [168363.173416] TDA10021: i2c-addr =
0x0c, id = 0x7c
Dec 12 01:18:26 manu-04 kernel: [168363.173419] vp2033_frontend_init
(0): found Philips CU1216 DVB-C frontend (TDA10021) @ 0x0c
Dec 12 01:18:26 manu-04 kernel: [168363.173422] vp2033_frontend_init
(0): Mantis DVB-C Philips CU1216 frontend attach success
Dec 12 01:18:26 manu-04 kernel: [168363.173428] DVB: registering
adapter 0 frontend 0 (Philips TDA10021 DVB-C)...
Dec 12 01:18:26 manu-04 kernel: [168363.173549] mantis_uart_init (0):
Initializing UART @ 9600 bps NONE parity
Dec 12 01:18:26 manu-04 kernel: [168363.175459] mantis_uart_work (0):
UART BUF:0 3f


The IR stuff needs a bit more work, which I will be pushing out, later ..

Regards,
Manu
--
To unsubscribe from this list: send the line unsubscribe linux-media in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html


Re: Which modules for the VP-2033? Where is the module mantis.ko?

2009-12-23 Thread Ruediger Dohmhardt
Manu Abraham schrieb:
 Hello Ruediger,

 On Wed, Dec 23, 2009 at 11:04 PM, Ruediger Dohmhardt
 ruediger.dohmha...@freenet.de wrote:
   
 Aljaž Prusnik schrieb:
 
 If using the http://jusst.de/hg/v4l-dvb tree, everything compiles ok,
 module loads, but there is no remote anywhere (there is an IR folder
 with the ir-common.ko file, under common there is not).


   
 Aljaz, do you have the module mantis.ko?

 Ruediger

 

 There was a build issue when i posted the link originally, but it had
 been fixed..

   
Yupp, it works now!

I just downloaded version 2315248f648c. It compiles fine on Suse 11.1 and
it works here with vdr-1.7.10 and xineliboutput (from CVS).

However, as Aljaž also noted, the driver does not autoload.
I need to do modprobe mantis.ko.

Manu, this used to work, but I do not remember when the autoload was lost.


Ciao Ruediger D.

--
To unsubscribe from this list: send the line unsubscribe linux-media in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html


Re: Which modules for the VP-2033? Where is the module mantis.ko?

2009-12-23 Thread Manu Abraham
On Thu, Dec 24, 2009 at 12:01 AM, Ruediger Dohmhardt
ruediger.dohmha...@freenet.de wrote:
 Manu Abraham schrieb:
 Hello Ruediger,

 On Wed, Dec 23, 2009 at 11:04 PM, Ruediger Dohmhardt
 ruediger.dohmha...@freenet.de wrote:

 Aljaž Prusnik schrieb:

 If using the http://jusst.de/hg/v4l-dvb tree, everything compiles ok,
 module loads, but there is no remote anywhere (there is an IR folder
 with the ir-common.ko file, under common there is not).



 Aljaz, do you have the module mantis.ko?

 Ruediger



 There was a build issue when i posted the link originally, but it had
 been fixed..


 Yupp, it works now!

 I just downloaded version 2315248f648c. It compiles fine on Suse 11.1 and
 it works here with vdr-1.7.10 and xineliboutput (from CVS).

 However, as Aljaž also noted, the driver does not autoload.
 I need to do modprobe mantis.ko.

 Manu, this used to work, but I do not remember when the autoload was lost.


Have you run depmod ?

Regards,
Manu
--
To unsubscribe from this list: send the line unsubscribe linux-media in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html


Re: Which modules for the VP-2033? Where is the module mantis.ko?

2009-12-23 Thread Ruediger Dohmhardt
Manu Abraham schrieb:
 On Thu, Dec 24, 2009 at 12:01 AM, Ruediger Dohmhardt
 ruediger.dohmha...@freenet.de wrote:
   
 Manu Abraham schrieb:
 
 Hello Ruediger,

 On Wed, Dec 23, 2009 at 11:04 PM, Ruediger Dohmhardt
 ruediger.dohmha...@freenet.de wrote:

   
 Aljaž Prusnik schrieb:

 
 If using the http://jusst.de/hg/v4l-dvb tree, everything compiles ok,
 module loads, but there is no remote anywhere (there is an IR folder
 with the ir-common.ko file, under common there is not).



   
 Aljaz, do you have the module mantis.ko?

 Ruediger


 
 There was a build issue when i posted the link originally, but it had
 been fixed..


   
 Yupp, it works now!

 I just downloaded version 2315248f648c. It compiles fine on Suse 11.1 and
 it works here with vdr-1.7.10 and xineliboutput (from CVS).

 However, as Aljaž also noted, the driver does not autoload.
 I need to do modprobe mantis.ko.

 Manu, this used to work, but I do not remember when the autoload was lost.
 


 Have you run depmod ?
   
Yes, I did

depmod -a

several times. Actually, if I were to miss a depmod than also the command

modprobe mantis

would not work, because the module would not be found.

Ruediger

--
To unsubscribe from this list: send the line unsubscribe linux-media in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html


Re: Which modules for the VP-2033? Where is the module mantis.ko?

2009-12-23 Thread Aljaž Prusnik
On sre, 2009-12-23 at 23:24 +0400, Manu Abraham wrote:
  Aljaz, do you have the module mantis.ko?
 There was a build issue when i posted the link originally, but it had
 been fixed..
 
 m...@manu-04:/stor/work/merge/v4l-dvb/v4l ls *.ko |grep mantis
 mantis_core.ko
 mantis.ko
 

Yup, I have both of them. I just compiled http://jusst.de/hg/v4l-dvb
again and the result is (depmode -a was run):

- ir-common.ko is under drivers/media/common (not drivers/media/IR like
Igor suggested but that is probably because it's a different
repository).
- mantis.ko and mantis_core.ko are under drivers/media/dvb/mantis

The modules loaded are:
mantis 14728  0 
mantis_core23909  12 mantis
ir_common  27005  1 mantis_core
mb86a1616598  1 mantis
tda100214822  1 mantis
tda100235823  1 mantis
zl10353 5893  1 mantis
stv0299 7860  1 mantis
dvb_core   75201  2 mantis_core,stv0299

kernel log has only these lines on mantis:
Mantis :03:07.0: PCI INT A - GSI 21 (level, low) - IRQ 21
DVB: registering new adapter (Mantis DVB adapter)
DVB: registering adapter 0 frontend 0 (Philips TDA10023 DVB-C)...

and that's it. No VP-2040 to be seen anywhere and it's not there even if
I do cat /proc/bus/input/devices (used to be one of the inputs).

So I guess this is now the work in progress if I understand correctly or
should the input be recognized regardless?

Just to confirm on the autoload: no, it does not happen by default. I
have to manually put modules under /etc/modules to load them on startup.

Regards,
Aljaz


--
To unsubscribe from this list: send the line unsubscribe linux-media in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html