On Friday 20 March 2009 03:24:49 Aguirre Rodriguez, Sergio Alberto wrote:
Hi Hans,
I did a quick analysis of the subdev, and noticed that some video ioctls
for the subdevices aren't there...
[gs]_crop
[gs]_parm
enum_frameintervals
enum_framesizes
enum_fmt_cap
I noticed this because we
On Friday 20 March 2009 06:18:44 Shah, Hardik wrote:
Hi All,
I will be posting series of three patches for the V4L2 driver on the
OMAP2/3 DSS.
Thanks! I'll review this within the week.
Regards,
Hans
Patch 1 -
This is the second revision of the patch.
Documentation added for the
From: Hiroshi DOYU hiroshi.d...@nokia.com
Subject: Re: [PATCH B 3/3] tidspbridge: decreate timeout to a saner value
Date: Fri, 20 Mar 2009 06:54:04 +0200 (EET)
From: ext Felipe Contreras felipe.contre...@gmail.com
Subject: Re: [PATCH B 3/3] tidspbridge: decreate timeout to a saner value
Date:
Hi!
I'm sending two very small patches for PM branch
arch/arm/mach-omap2/cpuidle34xx.c |2 --
arch/arm/mach-omap2/pm.c |1 +
arch/arm/mach-omap2/pm34xx.c |5 ++---
arch/arm/mach-omap2/resource34xx.c |1 +
4 files changed, 4 insertions(+), 5 deletions(-)
This patch fixes below compile error. The header file
'mach/omap34xx.h' declared all needed symbols.
CC arch/arm/mach-omap2/pm.o
CC arch/arm/mach-omap2/resource34xx.o
arch/arm/mach-omap2/resource34xx.c: In function 'resource_access_opp_lock':
arch/arm/mach-omap2/resource34xx.c:174:
Op 20 mrt 2009, om 06:20 heeft Hardik Shah het volgende geschreven:
--- a/drivers/media/video/Kconfig
+++ b/drivers/media/video/Kconfig
@@ -711,6 +711,26 @@ config VIDEO_CAFE_CCIC
CMOS camera controller. This is the controller found on first-
generation OLPC systems.
-Original Message-
From: Koen Kooi [mailto:k.k...@student.utwente.nl]
Sent: Friday, March 20, 2009 2:34 PM
To: Shah, Hardik
Cc: linux-me...@vger.kernel.org; linux-omap@vger.kernel.org; Jadav, Brijesh R;
Hiremath, Vaibhav
Subject: Re: [PATCH 3/3] V4L2 Driver for OMAP3/3 DSS.
On Fri, Mar 20, 2009 at 6:54 AM, Hiroshi DOYU hiroshi.d...@nokia.com wrote:
From: ext Felipe Contreras felipe.contre...@gmail.com
Subject: Re: [PATCH B 3/3] tidspbridge: decreate timeout to a saner value
Date: Fri, 20 Mar 2009 01:06:16 +0100
On Fri, Mar 20, 2009 at 2:00 AM, Guzman Lugo,
On Fri, Mar 20, 2009 at 9:36 AM, Hiroshi DOYU hiroshi.d...@nokia.com wrote:
From: Hiroshi DOYU hiroshi.d...@nokia.com
Subject: Re: [PATCH B 3/3] tidspbridge: decreate timeout to a saner value
Date: Fri, 20 Mar 2009 06:54:04 +0200 (EET)
From: ext Felipe Contreras felipe.contre...@gmail.com
Felipe,
-Original Message-
From: Felipe Contreras [mailto:felipe.contre...@gmail.com]
Sent: Friday, March 20, 2009 3:48 PM
To: Hiroshi DOYU
Cc: Gupta, Ramesh; Kanigeri, Hari; Guzman Lugo, Fernando;
linux-omap@vger.kernel.org; ameya.pala...@nokia.com
Subject: Re: [PATCH B 3/3]
On Fri, Mar 20, 2009 at 12:22 PM, Gupta, Ramesh grgu...@ti.com wrote:
Felipe,
-Original Message-
From: Felipe Contreras [mailto:felipe.contre...@gmail.com]
Sent: Friday, March 20, 2009 3:48 PM
To: Hiroshi DOYU
Cc: Gupta, Ramesh; Kanigeri, Hari; Guzman Lugo, Fernando;
Hi,
This series fixes a set of defects/issues in Smartreflex driver. SR
autocompensation is now
functional and is validated with these patches on a ES3.1 based SDP with the
N values in Efuse.
Patches apply on top of the pm-2.6.28 branch from Kevin's pm tree.
-Original Message-
From: Alexey Klimov [mailto:klimov.li...@gmail.com]
Sent: Friday, March 20, 2009 6:02 PM
To: Shah, Hardik
Cc: linux-me...@vger.kernel.org; linux-omap@vger.kernel.org; Jadav, Brijesh R;
Hiremath, Vaibhav
Subject: Re: [PATCH 3/3] V4L2 Driver for OMAP3/3 DSS.
From: Rajendra Nayak rna...@ti.com
This patch uses the sysclk to set the SR CLKLENGTH instead
of the OSC clock speed used earlier.
Signed-off-by: Rajendra Nayak rna...@ti.com
Signed-off-by: Jouni Hogander jouni.hogan...@nokia.com
---
arch/arm/mach-omap2/smartreflex.c | 14 +++---
1
From: Rajendra Nayak rna...@ti.com
This patch removes the local defines (PRCM_VDD1/2) in smartreflex
driver and uses the already existing global definitions (VDD1_OPP/VDD2_OPP)
from omap34xx.h file.
Signed-off-by: Rajendra Nayak rna...@ti.com
Signed-off-by: Tero Kristo tero.kri...@nokia.com
---
From: Rajendra Nayak rna...@ti.com
This patch resets the voltage level for each OPP on SR disable.
Signed-off-by: Rajendra Nayak rna...@ti.com
Signed-off-by: Jouni Hogander jouni.hogan...@nokia.com
---
arch/arm/mach-omap2/smartreflex.c | 49 ++
1 files
From: Rajendra Nayak rna...@ti.com
This patch disables the Smartreflex auto compensation for
both VDD1 and VDD2 only during CORE transitions in idle path.
Signed-off-by: Rajendra Nayak rna...@ti.com
Signed-off-by: Jouni Hogander jouni.hogan...@nokia.com
---
arch/arm/mach-omap2/pm34xx.c | 12
snip
Hello again,
my previous message due to bad connection was send with no end.
Sorry about that.
+ vout-vid = k;
+ vid_dev-vouts[k] = vout;
+ vout-vid_info.vid_dev = vid_dev;
+ vout-vid_info.overlays[0] = vid_dev-overlays[k + 1];
+
I'm using linux-omap-2.6.27-omap1 and am seeing an apparent timing
issue at kernel startup. The board is an OMAP 35x EVM and is
configured to boot from the SDcard. Everything works find IF a
keyboard is connected to the USB port of the EVM - the kernel detects
the mmcblk0 device (SDcard) and all
Hi,
This patch set reverts some patches from Paul Walmsley to add the clock
notification infrastucture for OMAP3, and adds new patches from him on top,
which
have only been circulating internally.
These patches are posted as they are needed for the patch set to remove virtual
clock nodes that
From: Rajendra Nayak rna...@ti.com
This reverts commit 39562d52cb454606790cf2036b6d491d3610953b.
Signed-off-by: Rajendra Nayak rna...@ti.com
Signed-off-by: Tero Kristo tero.kri...@nokia.com
---
arch/arm/mach-omap2/clock.c | 16
1 files changed, 4 insertions(+), 12
From: Rajendra Nayak rna...@ti.com
This reverts commit 7fa29eca41dfbc2417c68d09e191e56f38072ad6.
Signed-off-by: Rajendra Nayak rna...@ti.com
Signed-off-by: Tero Kristo tero.kri...@nokia.com
---
arch/arm/mach-omap2/clock.c | 16
1 files changed, 0 insertions(+), 16
From: Rajendra Nayak rna...@ti.com
This reverts commit a02d5a56ed7919a20dbe3c06086ddc77aae45b34.
Signed-off-by: Rajendra Nayak rna...@ti.com
Signed-off-by: Tero Kristo tero.kri...@nokia.com
---
arch/arm/mach-omap2/clock.c |4
1 files changed, 0 insertions(+), 4 deletions(-)
diff --git
From: Rajendra Nayak rna...@ti.com
This reverts commit 6b7ce1691c9084d562af4a1f3ffa2996a058ad06.
Signed-off-by: Rajendra Nayak rna...@ti.com
Signed-off-by: Tero Kristo tero.kri...@nokia.com
---
arch/arm/mach-omap2/clock.c | 11 +--
1 files changed, 1 insertions(+), 10 deletions(-)
From: Rajendra Nayak rna...@ti.com
This reverts commit 2634ca5d347d8ade65442d68cc8254aef1c5efa5.
Signed-off-by: Rajendra Nayak rna...@ti.com
Signed-off-by: Tero Kristo tero.kri...@nokia.com
---
arch/arm/plat-omap/clock.c | 81 ---
From: Rajendra Nayak rna...@ti.com
This reverts commit cd6cbc96f64a4d7baecf52b5180827021863b23a.
Signed-off-by: Rajendra Nayak rna...@ti.com
Signed-off-by: Tero Kristo tero.kri...@nokia.com
---
arch/arm/plat-omap/clock.c | 126
From: Paul Walmsley p...@pwsan.com
This patch implements notifier registration and unregistration functions
for clock rate changes.
The implementation is via a blocking notifier, called with the clockfw
spinlock held. Callback functions must not re-enter the clock
framework.
There are likely
From: Paul Walmsley p...@pwsan.com
Call clock notifier blocks before and after rate and parent changes.
If the rate change fails for any reason after the notifier is called with
a pre-rate-change message, call the notifier again with an abort message.
Pre-rate-change notifiers are passed the
You need to add the Kernel option rootdelay=1 to basically delay the
Kernel for a moment while attempting to using the SDcard as the RFS
mount point.
-- Ashwin
On Fri, Mar 20, 2009 at 9:06 AM, twebb taliaferr...@gmail.com wrote:
I'm using linux-omap-2.6.27-omap1 and am seeing an apparent
From: Tero Kristo tero.kri...@nokia.com
Hi,
This patch fixes a problem where an interrupt may cause scheduling inside
idle loop, but which does not get served due to the decision that has already
been done for the system to enter idle. This can cause nasty latencies in
some cases.
This would
From: Tero Kristo tero.kri...@nokia.com
Fixes a bug where scheduling is delayed until next wakeup due to race
condition (e.g. interrupt requests scheduling just before omap_sram_idle
is entered.)
Signed-off-by: Tero Kristo tero.kri...@nokia.com
---
arch/arm/mach-omap2/cpuidle34xx.c |2 +-
Op 20 mrt 2009, om 14:34 heeft Ashwin Bihari het volgende geschreven:
You need to add the Kernel option rootdelay=1 to basically delay the
Kernel for a moment while attempting to using the SDcard as the RFS
mount point.
Since kernel 2.6.24 you can use 'rootwait', which will wait till it
Hi,
This patch set removes the virtual clock node implementation for
VDD1/2 on omap3 which was causing issues with recursive locking of spinlocks.
All references to virtual clock nodes from resource framework and cpufreq
driver are removed. Resource framework now uses individual dpll clock
nodes
On Fri, Mar 20, 2009 at 9:44 AM, Koen Kooi k.k...@student.utwente.nl wrote:
Op 20 mrt 2009, om 14:34 heeft Ashwin Bihari het volgende geschreven:
You need to add the Kernel option rootdelay=1 to basically delay the
Kernel for a moment while attempting to using the SDcard as the RFS
mount
On Fri, Mar 20, 2009 at 9:53 AM, Ashwin Bihari abih...@gmail.com wrote:
On Fri, Mar 20, 2009 at 9:44 AM, Koen Kooi k.k...@student.utwente.nl wrote:
Op 20 mrt 2009, om 14:34 heeft Ashwin Bihari het volgende geschreven:
You need to add the Kernel option rootdelay=1 to basically delay the
On Fri, Mar 20, 2009 at 9:59 AM, twebb taliaferr...@gmail.com wrote:
On Fri, Mar 20, 2009 at 9:53 AM, Ashwin Bihari abih...@gmail.com wrote:
On Fri, Mar 20, 2009 at 9:44 AM, Koen Kooi k.k...@student.utwente.nl wrote:
Op 20 mrt 2009, om 14:34 heeft Ashwin Bihari het volgende geschreven:
You
Hi,
I have a few weird USB related errors.
Hardware: beagleboard rev C2.
OS: 2.6.28 (angstrom, r15 version)
If I connect my pvrusb2 controller directly to the usb host port the
device works as expected.
However if I connect the device through a (powered) usb hub, the
device does not work.
one more issue, same hw/sw;
If I connect my webcam (pwc driver) through the hub on the usb host port I get:
pwc: isoc_init() submit_urb 0 failed with error -28
On the otg port (again through a hub) there are some aretefacts (as
reported before)
directly connecting the cam to the usb host port
This patch has been applied to the linux-omap
by youw fwiendly patch wobot.
Commit: 989f9207562ffca4e83d0329c59efa0059287e46
PatchWorks
http://patchwork.kernel.org/patch/11961/
Git
This patch has been applied to the linux-omap
by youw fwiendly patch wobot.
Commit: 1679aed476993ee6be7c3069cf345236e2f8ef86
PatchWorks
http://patchwork.kernel.org/patch/11962/
Git
This patch has been applied to the linux-omap
by youw fwiendly patch wobot.
Commit: 495d51cb6376bbf846738f9c760ca28237667ff5
PatchWorks
http://patchwork.kernel.org/patch/12141/
Git
* David Brownell davi...@pacbell.net [090319 15:27]:
On Tuesday 17 March 2009, Kevin Hilman wrote:
- Beagle: MMC regulator: unbalanced disables. This happens on boot
and during suspend/resume. I don't think this is related to the PM
branch, but is probably in linux-omap HEAD also, but
This patch has been applied to the linux-omap
by youw fwiendly patch wobot.
Commit: 51b50f420fbb144b5a02dbc817fe7b72c3476d66
PatchWorks
http://patchwork.kernel.org/patch/12294/
Git
This patch has been applied to the linux-omap
by youw fwiendly patch wobot.
Commit: f4223ec219313d631c3f620220ed23670c158a34
PatchWorks
http://patchwork.kernel.org/patch/12140/
Git
On Friday 20 March 2009, Tony Lindgren wrote:
* David Brownell davi...@pacbell.net [090319 15:27]:
* Least hassle ... I think all these should merge to the
linux-omap tree in any case (and thence linux-pm):
http://marc.info/?l=linux-omapm=123699264117846w=2
* David Brownell davi...@pacbell.net [090320 12:46]:
On Friday 20 March 2009, Tony Lindgren wrote:
* David Brownell davi...@pacbell.net [090319 15:27]:
* Least hassle ... I think all these should merge to the
linux-omap tree in any case (and thence linux-pm):
* Tony Lindgren t...@atomide.com [090320 12:56]:
* David Brownell davi...@pacbell.net [090320 12:46]:
On Friday 20 March 2009, Tony Lindgren wrote:
* David Brownell davi...@pacbell.net [090319 15:27]:
* Least hassle ... I think all these should merge to the
linux-omap tree
Hello Kyuwon,
On Fri, 20 Mar 2009, Kim Kyuwon wrote:
I found a problem on PM Branch with OMAP3430 ES3.1 Board when enabling
OMAP_RESET_CLOCKS feature.
In clk_disable_unsed() function, as soon as sad2d_ick is disabled,
prcm interrupt is generated and its handler can't exit loop at next
On Fri, 20 Mar 2009, Paul Walmsley wrote:
On Fri, 20 Mar 2009, Kim Kyuwon wrote:
I found a problem on PM Branch with OMAP3430 ES3.1 Board when enabling
OMAP_RESET_CLOCKS feature.
In clk_disable_unsed() function, as soon as sad2d_ick is disabled,
prcm interrupt is generated and its
Hi all,
As there are quite a few omap patches going upstream this coming
merge window, here are some notes on where we should go after
2.6.29 gets released.
The goal of course is still to get all the important omap code
merged into the mainline kernel, and then just keep linux-omap
around to
From: David Brownell dbrown...@users.sourceforge.net
Hook up VPLL2 regulator on 3430 SDP. Link that and VDAC to the
framebuffer device, supporting eventual conversion to use the
regulator framework.
Signed-off-by: David Brownell dbrown...@users.sourceforge.net
---
Try also to merge this into
On Friday 20 March 2009, Tony Lindgren wrote:
This patch has been applied to the linux-omap
by youw fwiendly patch wobot.
Commit: f4223ec219313d631c3f620220ed23670c158a34
PatchWorks
http://patchwork.kernel.org/patch/12140/
To avoid needless divergence from mainline, the appended
patch
On Friday 20 March 2009, David Brownell wrote:
I may just prepare an mmc-twl4030 patch with ugly workarounds,
since I'm getting the strong feeling that it'll take forever
to get the regulator framework fixed in that area.
I just sent that ...
--
To unsubscribe from this list: send the line
On Fri, Mar 20, 2009 at 03:12:31PM -0700, Tony Lindgren wrote:
Hi all,
As there are quite a few omap patches going upstream this coming
merge window, here are some notes on where we should go after
2.6.29 gets released.
The goal of course is still to get all the important omap code
On Friday 20 March 2009, Felipe Balbi wrote:
drivers/regulator/twl4030-regulator.c | 503 +++
Already queued for mainline...
--
To unsubscribe from this list: send the line unsubscribe linux-omap in
the body of a message to majord...@vger.kernel.org
More majordomo info at
55 matches
Mail list logo
