* Robert Nelson robertcnel...@gmail.com [140704 09:59]:
On Fri, Jul 4, 2014 at 11:51 AM, Sebastian Andrzej Siewior
bige...@linutronix.de wrote:
On 07/03/2014 09:34 AM, Tony Lindgren wrote:
Heh. Just to summarize the reason ttyO needs to be a separate name
and device entry from ttyS is
* Paul Walmsley p...@pwsan.com [140706 16:43]:
Here are some basic OMAP test results for Linux v3.16-rc4.
Logs and other details at:
...
PM: chip retention via dynamic idle:
FAIL ( 7/ 7): 2430sdp, 3530es3beagle, 3730beaglexm, 37xxevm,
4430es2panda, 4460pandaes,
* Olof Johansson o...@lixom.net [140705 12:46]:
On Fri, Jul 4, 2014 at 11:06 PM, Olof Johansson o...@lixom.net wrote:
Hi,
On Fri, Jul 4, 2014 at 9:47 PM, Olof Johansson o...@lixom.net wrote:
On Mon, Jun 30, 2014 at 12:08:57AM -0700, Tony Lindgren wrote:
* Tony Lindgren t...@atomide.com
* Nicholas Krause xerofo...@gmail.com [140704 10:03]:
This patch fixes the call to ompa_cfg_reg(USB2_SPEED) in the case
that the cpu is a omap16xx and the nwires are not equal to 3.
This is most likely unsafe to do as the pin is probably
shared with some other device and we have to rely for
the
* Roger Quadros rog...@ti.com [140704 02:57]:
After clarification from the hardware team it was found that
this 1.8V PHY supply can't be switched OFF when SoC is Active.
Since the PHY IPs don't contain isolation logic built in the design to
allow the power rail to be switched off, there is a
* Roger Quadros rog...@ti.com [140704 02:58]:
The ldousb_reg regulator provides power to the USB1 and USB2
High Speed PHYs.
Signed-off-by: Roger Quadros rog...@ti.com
This too:
Acked-by: Tony Lindgren t...@atomide.com
---
arch/arm/boot/dts/dra7-evm.dts | 8
1 file changed, 8
Hi Tony,
On 07/07/2014 11:29 AM, Tony Lindgren wrote:
* Roger Quadros rog...@ti.com [140704 02:57]:
After clarification from the hardware team it was found that
this 1.8V PHY supply can't be switched OFF when SoC is Active.
Since the PHY IPs don't contain isolation logic built in the design
Paul,
On 07/06/2014 03:23 AM, Paul Walmsley wrote:
Hi
On Fri, 4 Jul 2014, Roger Quadros wrote:
On 07/03/2014 10:48 PM, Paul Walmsley wrote:
On Thu, 3 Jul 2014, Roger Quadros wrote:
This module is needed for the SATA and PCIe PHYs.
Signed-off-by: Roger Quadros rog...@ti.com
* Roger Quadros rog...@ti.com [140707 01:36]:
Hi Tony,
On 07/07/2014 11:29 AM, Tony Lindgren wrote:
* Roger Quadros rog...@ti.com [140704 02:57]:
After clarification from the hardware team it was found that
this 1.8V PHY supply can't be switched OFF when SoC is Active.
Since the PHY
On Sun, Jun 29, 2014 at 06:21:34PM +0200, Andre Heider wrote:
Hi,
this series adds PRUv2 support to uio_pruss through devicetree, makes the
device usable on am33xx and enables it on beaglebone black.
Inspired by old patches from Matt Porter found in a downstream tree.
To archieve that
On 07/06/2014 09:49 AM, Manish Badarkhe wrote:
Replaced snd_soc_register_component with its devres equivalent,
devm_snd_soc_register_component.
Signed-off-by: Manish Badarkhe badarkhe.man...@gmail.com
---
:100644 100644 eb9c392... 1dc95b5... Msound/soc/omap/omap-hdmi.c
On 07/05/2014 08:09 AM, Manish Badarkhe wrote:
Replaced snd_soc_register_component with its devres equivalent,
devm_snd_soc_register_component.
Signed-off-by: Manish Badarkhe badarkhe.man...@gmail.com
---
:100644 100644 efe2cd6... bfc8f8e... Msound/soc/omap/omap-mcbsp.c
On 07/06/2014 09:50 AM, Manish Badarkhe wrote:
Replaced snd_soc_register_component with its devres equivalent,
devm_snd_soc_register_component.
Signed-off-by: Manish Badarkhe badarkhe.man...@gmail.com
---
:100644 100644 6925d71... 011e30e... Msound/soc/omap/omap-dmic.c
* Suman Anna s-a...@ti.com [140623 22:26]:
The DSP platform device for TI DSP/Bridge is currently
created unconditionally whenever CONFIG_TIDSPBRIDGE is
enabled. This device should only be created on OMAP34xx/
OMAP36xx SoCs, and not for other OMAP3 derived SoCs or when
booting multi-arch
* Tony Lindgren t...@atomide.com [140702 01:13]:
* Felipe Balbi ba...@ti.com [140701 12:49]:
On Tue, Jun 17, 2014 at 08:19:35AM -0500, Felipe Balbi wrote:
On Tue, Jun 17, 2014 at 04:04:51PM +0530, Sekhar Nori wrote:
ROM code on AM437x does not support writing to L2C-310 power control
On Mon, Jul 07, 2014 at 03:47:27AM -0700, Tony Lindgren wrote:
That's now merged into v3.16-rc4, so applying this into
omap-for-v3.16/fixes.
I intentionally left the warning in the hope that someone would update
it to write to the register.
From the comments in the patch, it seems that
* Guido Martínez gu...@vanguardiasur.com.ar [140702 06:34]:
Currently, child nodes of the gpmc node are iterated and probed
regardless of their 'status' property. This means adding 'status =
disabled;' has no effect.
This patch changes the iteration to only probe nodes marked as
available.
On Sat, 05 Jul 2014, Peter Griffin wrote:
Signed-off-by: Peter Griffin peter.grif...@linaro.org
---
MAINTAINERS | 1 +
1 file changed, 1 insertion(+)
Acked-by: Lee Jones lee.jo...@linaro.org
diff --git a/MAINTAINERS b/MAINTAINERS
index 702ca10..269ad3b 100644
--- a/MAINTAINERS
+++
Subject is wrong, this has nothing to do with ARM. Should be USB.
On Sat, 05 Jul 2014, Peter Griffin wrote:
This patch documents the device tree documentation required for
the ST usb3 controller glue layer found in STiH407 devices.
Signed-off-by: Giuseppe Cavallaro peppe.cavall...@st.com
* Russell King - ARM Linux li...@arm.linux.org.uk [140707 03:51]:
On Mon, Jul 07, 2014 at 03:47:27AM -0700, Tony Lindgren wrote:
That's now merged into v3.16-rc4, so applying this into
omap-for-v3.16/fixes.
I intentionally left the warning in the hope that someone would update
it to write
* Nishanth Menon n...@ti.com [140605 18:12]:
From: Andrii.Tseglytskyi andrii.tseglyts...@ti.com
Add ABB device nodes for OMAP5 family of devices. Data is based on
final production OMAP543x Technical Reference Manual revision Z (April 2013).
Final production Data Manual for OMAP5432
* Peter Ujfalusi peter.ujfal...@ti.com [140703 02:53]:
The use of FIFO in McASP can reduce the risk of audio under/overrun and
lowers the load on the memories since the DMA will operate in bursts.
Applying both into omap-for-v3.16/fixes thanks.
Tony
--
To unsubscribe from this list: send the
* Nishanth Menon n...@ti.com [140516 15:37]:
omap44xx_restart is defined as a static void inline when DRA7/AM437X is
defined alone, which implies that the restart function is no longer
functional even though it is built in. So, fix the definition of the
same.
Unfortunately, the number of
* Jyri Sarha jsa...@ti.com [140626 12:26]:
This code is not working currently and it can be removed. There is a
conflict in sharing resources with the actual HDMI driver and with
the ASoC HDMI audio DAI driver.
Is this OK to queue for v3.17 or do we need this for v3.16-rc series?
Regards,
* Enric Balletbo i Serra eballe...@iseebcn.com [140625 04:44]:
As this board use external clock for RMII interface we should specify 'rmii'
phy mode and 'rmii-clock-ext' to make ethernet working.
Thanks applying into omap-for-v3.16/fixes.
Tony
--
To unsubscribe from this list: send the line
On Monday 07 July 2014 04:32 PM, Tony Lindgren wrote:
* Russell King - ARM Linux li...@arm.linux.org.uk [140707 03:51]:
On Mon, Jul 07, 2014 at 03:47:27AM -0700, Tony Lindgren wrote:
That's now merged into v3.16-rc4, so applying this into
omap-for-v3.16/fixes.
I intentionally left the
* Rickard Strandqvist rickard_strandqv...@spectrumdigital.se [140625 05:29]:
A struct member variable is set to the same value more than once
This was found using a static code analysis program called cppcheck.
Applying into omap-for-v3.17/fixes-not-urgent thanks.
Tony
--
To unsubscribe from
On Mon, Jul 07, 2014 at 05:20:27PM +0530, Sekhar Nori wrote:
OMAP4430 had L2 cache controller version r2p0 (per the public TRM) which
does not have this register. So unless there is a ROM API that was
introduced after OMAP4430, this would not be there even for other
OMAP4s. Public TRM of
* Russell King - ARM Linux li...@arm.linux.org.uk [140707 05:17]:
On Mon, Jul 07, 2014 at 05:20:27PM +0530, Sekhar Nori wrote:
OMAP4430 had L2 cache controller version r2p0 (per the public TRM) which
does not have this register. So unless there is a ROM API that was
introduced after
On Sat, 05 Jul 2014, Peter Griffin wrote:
This patch adds the ST glue logic to manage the DWC3 HC
on STiH407 SoC family. It manages the powerdown signal,
and configures the internal glue logic and syscfg registers.
Signed-off-by: Giuseppe Cavallaro peppe.cavall...@st.com
Signed-off-by:
On Fri, 4 Jul 2014 18:34:08 +0200
Sebastian Andrzej Siewior bige...@linutronix.de wrote:
There is no access to access a struct uart_8250_port for a specific
line. This is only required outside of the 8250/uart callbacks like for
devices' suspend remove callbacks. For those the 8250-core
On Fri, 4 Jul 2014 18:34:09 +0200
Sebastian Andrzej Siewior bige...@linutronix.de wrote:
The OMAP version of the 8250 can actually use 1:1 serial8250_startup().
However it needs to be extended by a wakeup irq which should to be
requested enabled at -startup() time.
Signed-off-by:
On Fri, 4 Jul 2014 18:34:10 +0200
Sebastian Andrzej Siewior bige...@linutronix.de wrote:
While comparing the OMAP-serial and the 8250 part of this I noticed that
the the latter does not use runtime-pm.
Yes it does, but 8250 parts (generally - omap presumably is special
here ?) need to be
On Saturday, July 05, 2014 3:25 PM, Peter Griffin wrote:
This patch adds the ST glue logic to manage the DWC3 HC
on STiH407 SoC family. It manages the powerdown signal,
and configures the internal glue logic and syscfg registers.
Signed-off-by: Giuseppe Cavallaro peppe.cavall...@st.com
On Fri, 4 Jul 2014 11:57:40 -0500
Robert Nelson robertcnel...@gmail.com wrote:
On Fri, Jul 4, 2014 at 11:51 AM, Sebastian Andrzej Siewior
bige...@linutronix.de wrote:
On 07/03/2014 09:34 AM, Tony Lindgren wrote:
Heh. Just to summarize the reason ttyO needs to be a separate name
and device
On Mon, Jul 07, 2014 at 05:39:26AM -0700, Tony Lindgren wrote:
* Russell King - ARM Linux li...@arm.linux.org.uk [140707 05:17]:
On Mon, Jul 07, 2014 at 05:20:27PM +0530, Sekhar Nori wrote:
OMAP4430 had L2 cache controller version r2p0 (per the public TRM) which
does not have this
On Mon, Jul 7, 2014 at 6:32 AM, Tony Lindgren t...@atomide.com wrote:
* Nishanth Menon n...@ti.com [140605 18:12]:
From: Andrii.Tseglytskyi andrii.tseglyts...@ti.com
Add ABB device nodes for OMAP5 family of devices. Data is based on
final production OMAP543x Technical Reference Manual
Hi,
On Mon, Jul 07, 2014 at 02:40:08PM +0100, Russell King - ARM Linux wrote:
On Mon, Jul 07, 2014 at 05:39:26AM -0700, Tony Lindgren wrote:
* Russell King - ARM Linux li...@arm.linux.org.uk [140707 05:17]:
On Mon, Jul 07, 2014 at 05:20:27PM +0530, Sekhar Nori wrote:
OMAP4430 had L2
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hi Tony
The following changes since commit a497c3ba1d97fc69c1e78e7b96435ba8c2cb42ee:
Linux 3.16-rc2 (2014-06-21 19:02:54 -1000)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/pjw/omap-pending.git
Hey Tony,
This seems to be a false positive then.Please reply if it is so I can remove the
Fix me message.
Cheers Nick
On Mon, Jul 7, 2014 at 4:14 AM, Tony Lindgren t...@atomide.com wrote:
* Nicholas Krause xerofo...@gmail.com [140704 10:03]:
This patch fixes the call to
On Mon, 7 Jul 2014, Andre Heider wrote:
On Sun, Jun 29, 2014 at 06:21:34PM +0200, Andre Heider wrote:
this series adds PRUv2 support to uio_pruss through devicetree, makes the
device usable on am33xx and enables it on beaglebone black.
Inspired by old patches from Matt Porter found in a
On 3 July 2014 06:38, Ezequiel García ezequ...@vanguardiasur.com.ar wrote:
On 02 Jul 02:08 PM, Dave Airlie wrote:
On 2 July 2014 12:31, Darren Etheridge detheri...@ti.com wrote:
On 07/01/2014 06:39 PM, Guido Martínez wrote:
On Fri, Jun 27, 2014 at 05:08:51PM -0500, Darren Etheridge wrote:
On Monday 07 July 2014 08:40 PM, Felipe Balbi wrote:
Hi,
On Mon, Jul 07, 2014 at 02:40:08PM +0100, Russell King - ARM Linux wrote:
On Mon, Jul 07, 2014 at 05:39:26AM -0700, Tony Lindgren wrote:
* Russell King - ARM Linux li...@arm.linux.org.uk [140707 05:17]:
On Mon, Jul 07, 2014 at
43 matches
Mail list logo