I know this is a top post, and a comment on a post from August, but I'd like
to point out that without this patch I can't get musb host mode to work
on the beagle board xm (3630).
With this patch, host mode works. If I disconnect and reconnect the port
goes into a_idle, which is almost right,
Felipe Balbi wrote:
Hi,
On Mon, Jan 10, 2011 at 06:47:58AM -0500, Brad Parker wrote:
...
(my expectation is that the mode should toggle from b_idle to a_host
when I plug in an a connector with the id pin tied correctly, and
back to b_idle
when I disconnect)
What's the problem
It's probably expected, but I can't get the EHCI USB port to work
on a beagle board XM (36xx) using the current omap tree.
It this most likely due to these clock issues?
the (very old) angstrom 2.6.32 kernel works fine, as a comparison.
-brad
--
To unsubscribe from this list: send the line
Brad Parker wrote:
I can't get OTG host mode to work with any recent kernels. I'm
curious if anyone else has tried this.
It may well be something most people don't do.
I know it's poor form to respond to you own posts, but I thought I'd
add/ask the following:
I've found that the sys_boot
finicky about
getting into host mode, sometimes
wanting the phy to be reset before it will switch.
-brad
---
Brad Parker
Heeltoe Consulting
http://www.heeltoe.com
781-483-3101
--
To unsubscribe from this list: send the line unsubscribe linux-omap in
the body of a message to majord