,
and a longer timeout at least allows more cards to be used.
Signed-off-by: Frans Meulenbroeks fransmeulenbro...@gmail.com
---
What somewhat troubles me is that this worked in .27, so it might be this
patch does not address the root cause. Then again this is the best I can
do. If someone has a better
Hi,
I have a few weird USB related errors.
Hardware: beagleboard rev C2.
OS: 2.6.28 (angstrom, r15 version)
If I connect my pvrusb2 controller directly to the usb host port the
device works as expected.
However if I connect the device through a (powered) usb hub, the
device does not work.
one more issue, same hw/sw;
If I connect my webcam (pwc driver) through the hub on the usb host port I get:
pwc: isoc_init() submit_urb 0 failed with error -28
On the otg port (again through a hub) there are some aretefacts (as
reported before)
directly connecting the cam to the usb host port
, Frans Meulenbroeks wrote:
Hi,
Several times I encountered issues with devices connected to the
beagle board's OTG port (through a powered hub). (kernel 2.6.28-omap1).
Today this happened again and I was lucky enough to be able to find
the symptoms.
Scenario: I had a file on a USB
Hi,
Several times I encountered issues with devices connected to the
beagle board's OTG port (through a powered hub).
(kernel 2.6.28-omap1).
Today this happened again and I was lucky enough to be able to find
the symptoms.
Scenario: I had a file on a USB hard disk. This file was copied to an
SD