Hi All,
did any of you run into such a crash with the PowerVR GFX drivers before?
(it's custom compiled, as the original one is not for this kernel version)
OMAP34XX LAB # bootm 8030
## Booting image at 8030 ...
Image Name: Linux-2.6.32-10567-g6833f1a-dirt
Image Type: ARM Linux K
Dear Anand, All,
We are trying to make the HSUSB1 port on the OMAP3430 work as an USB
host.
To do that, an ISP1507A ULPI HighSpeed USB transceiver is connected
to the HSUSB1pins (HSUSB1_STP, CLK, D-0..D7, DIR, NXT).
I have all these USB related kernel config options enabled:
USB_EHCI_HCD
USB_
Dear Anand,
thank you very much for your exhaustive answer and help. Unfortunately
it seems there is no clock signal coming out of the HSUSB1_CLK line.
We are trying to make the HSUSB1 port on the OMAP3430 work as an USB host.
To do that, an ISP1507A ULPI HighSpeed USB transceiver is connecte
Dear All,
We are trying to make the HSUSB1 port on the OMAP3430 work as an USB host.
To do that, an ISP1507A ULPI HighSpeed USB transceiver is connected to
the HSUSB1pins (HSUSB1_STP, CLK, D-0..D7, DIR, NXT).
I have all these USB related kernel config options enabled:
USB_EHCI_HCD
USB_OHCI_HCD
wrote:
-- Forwarded message --
From: Tar Gz
Date: Tue, 18 Aug 2009 04:47:21 -0700
Subject: Re: [help] 2.6.30 can't booting
To: Kovacs Peter Tamas , linux-omap
On 8/17/09, Kovacs Peter Tamas wrote:
Hi,
we use these parameters for NFS booting:
setenv bootargs console=ttyS2,115200n
Dear All,
I'm trying to compile the kernel for my Logic LDP3430-VG1.0.0.
Following the instructions at
https://omapzoom.org/gf/project/omapkernel/wiki/?pagename=Getting+Stated+with+Linux+OMAP+Kernel
and
https://omapzoom.org/gf/project/omapzoom/wiki/?pagename=BootingAndFlashing
I was able to comp