On Sun, Jan 18, 2015 at 09:18:21PM +0100, Pavel Machek wrote:
Hi!
Ok, what do you suggest? AFAICT, without MODE_CONFIG, continuous ADC
mode is not available, so we have to force it periodically, so this
should be correct.
I will have a better look and let you know. for now, adding
Hi!
Ok, what do you suggest? AFAICT, without MODE_CONFIG, continuous ADC
mode is not available, so we have to force it periodically, so this
should be correct.
I will have a better look and let you know. for now, adding a single
read should not hurt ( but I will double check)
Any news
On Sat, Jan 03, 2015 at 05:22:42PM +0100, Pavel Machek wrote:
Hi!
When periodic mode is not enabled, it is neccessary to force reads.
Signed-off-by: Pavel Machek pa...@ucw.cz
--- a/drivers/thermal/ti-soc-thermal/ti-bandgap.c
+++
On Sat, Jan 03, 2015 at 12:46:32PM +0100, Pavel Machek wrote:
For omap3, proper implementation of eocz bit is needed. It was
actually a TODO in the driver.
When periodic mode is not enabled, it is neccessary to force reads.
Signed-off-by: Pavel Machek pa...@ucw.cz
diff --git
For omap3, proper implementation of eocz bit is needed. It was
actually a TODO in the driver.
When periodic mode is not enabled, it is neccessary to force reads.
Signed-off-by: Pavel Machek pa...@ucw.cz
diff --git a/drivers/thermal/ti-soc-thermal/ti-bandgap.c
Hi!
When periodic mode is not enabled, it is neccessary to force reads.
Signed-off-by: Pavel Machek pa...@ucw.cz
--- a/drivers/thermal/ti-soc-thermal/ti-bandgap.c
+++ b/drivers/thermal/ti-soc-thermal/ti-bandgap.c
@@ -43,6 +43,8 @@
#include ti-bandgap.h
+static int
