From: Jean Pihet <j-pi...@ti.com>
Isolate the PM code under CONFIG_PM. This includes the following:
- core PM,
- powerdomain,
- clockdomain,
- smartreflex,
- voltagedomain,
- OPP.
This cleans up the PM code in order to allow it to be built as a
module.
Signed-off-by: Jean Pihet <j-pi...@ti.com>
---
arch/arm/mach-omap2/Makefile | 45 +++++++++++++++++++++--------------------
1 files changed, 23 insertions(+), 22 deletions(-)
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index 43c5c22..0fe8a5b 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -49,14 +49,9 @@ obj-$(CONFIG_ARCH_OMAP4) += mux44xx.o
obj-$(CONFIG_ARCH_OMAP2) += sdrc2xxx.o
# obj-$(CONFIG_ARCH_OMAP3) += sdrc3xxx.o
-# OPP table initialization
-ifeq ($(CONFIG_PM_OPP),y)
-obj-y += opp.o
-obj-$(CONFIG_ARCH_OMAP3) += opp3xxx_data.o
-obj-$(CONFIG_ARCH_OMAP4) += opp4xxx_data.o
-endif
# Power Management
+# Includes core PM, powerdomain, clockdomain, smartreflex, voltagedomain, OPP
ifeq ($(CONFIG_PM),y)
obj-$(CONFIG_ARCH_OMAP2) += pm24xx.o
obj-$(CONFIG_ARCH_OMAP2) += sleep24xx.o pm_bus.o
@@ -74,29 +69,13 @@ ifeq ($(CONFIG_PM_VERBOSE),y)
CFLAGS_pm_bus.o += -DDEBUG
endif
-endif
-
-# PRCM
-obj-$(CONFIG_ARCH_OMAP2) += prcm.o cm2xxx_3xxx.o prm2xxx_3xxx.o
-obj-$(CONFIG_ARCH_OMAP3) += prcm.o cm2xxx_3xxx.o prm2xxx_3xxx.o \
- vc3xxx_data.o vp3xxx_data.o
-# XXX The presence of cm2xxx_3xxx.o on the line below is temporary and
-# will be removed once the OMAP4 part of the codebase is converted to
-# use OMAP4-specific PRCM functions.
-obj-$(CONFIG_ARCH_OMAP4) += prcm.o cm2xxx_3xxx.o cminst44xx.o \
- cm44xx.o prcm_mpu44xx.o \
- prminst44xx.o vc44xx_data.o \
- vp44xx_data.o
-
# OMAP voltage domains
-ifeq ($(CONFIG_PM),y)
voltagedomain-common := voltage.o
obj-$(CONFIG_ARCH_OMAP2) += $(voltagedomain-common)
obj-$(CONFIG_ARCH_OMAP3) += $(voltagedomain-common) \
voltagedomains3xxx_data.o
obj-$(CONFIG_ARCH_OMAP4) += $(voltagedomain-common) \
voltagedomains44xx_data.o
-endif
# OMAP powerdomain framework
powerdomain-common += powerdomain.o powerdomain-common.o
@@ -140,10 +119,32 @@ obj-$(CONFIG_ARCH_OMAP3) += $(clock-common)
clock3xxx.o \
obj-$(CONFIG_ARCH_OMAP4) += $(clock-common) clock44xx_data.o \
dpll3xxx.o dpll44xx.o
+# OPP table initialization
+ifeq ($(CONFIG_PM_OPP),y)
+obj-y += opp.o
+obj-$(CONFIG_ARCH_OMAP3) += opp3xxx_data.o
+obj-$(CONFIG_ARCH_OMAP4) += opp4xxx_data.o
+endif
+
# OMAP2 clock rate set data (old "OPP" data)
obj-$(CONFIG_SOC_OMAP2420) += opp2420_data.o
obj-$(CONFIG_SOC_OMAP2430) += opp2430_data.o
+endif
+# end of CONFIG_PM
+
+# PRCM
+obj-$(CONFIG_ARCH_OMAP2) += prcm.o cm2xxx_3xxx.o prm2xxx_3xxx.o
+obj-$(CONFIG_ARCH_OMAP3) += prcm.o cm2xxx_3xxx.o prm2xxx_3xxx.o \
+ vc3xxx_data.o vp3xxx_data.o
+# XXX The presence of cm2xxx_3xxx.o on the line below is temporary and
+# will be removed once the OMAP4 part of the codebase is converted to
+# use OMAP4-specific PRCM functions.
+obj-$(CONFIG_ARCH_OMAP4) += prcm.o cm2xxx_3xxx.o cminst44xx.o \
+ cm44xx.o prcm_mpu44xx.o \
+ prminst44xx.o vc44xx_data.o \
+ vp44xx_data.o
+
# hwmod data
obj-$(CONFIG_SOC_OMAP2420) += omap_hwmod_2420_data.o
obj-$(CONFIG_SOC_OMAP2430) += omap_hwmod_2430_data.o
--
1.7.4.1
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
