From: Moiz Sonasath m-sonas...@ti.com
For the gadget pullup functionality to work in
SS mode it requires a particular sequence of
toggling the run-stop bit. Here is the required
sequence:
- Set DCTL[31]
- Clear DCTL[31]
- Clear OMAP5430_CONTROL_CORE__PHY_POWER_USB[14]
- Clear DCTL[8:5] = 0x00
-
Hi,
On Wed, Sep 19, 2012 at 05:00:27PM +0530, Kishon Vijay Abraham I wrote:
From: Moiz Sonasath m-sonas...@ti.com
For the gadget pullup functionality to work in
SS mode it requires a particular sequence of
toggling the run-stop bit. Here is the required
sequence:
- Set DCTL[31]
- Clear
Hi,
On Wed, Sep 19, 2012 at 10:02:48AM -0500, Sonasath, Moiz wrote:
Felipe,
On Wed, Sep 19, 2012 at 6:53 AM, Felipe Balbi ba...@ti.com wrote:
Hi,
On Wed, Sep 19, 2012 at 05:00:27PM +0530, Kishon Vijay Abraham I wrote:
From: Moiz Sonasath m-sonas...@ti.com
For the gadget
On Wed, Sep 19, 2012 at 11:50:53AM -0500, Sonasath, Moiz wrote:
Felipe,
On Wed, Sep 19, 2012 at 11:04 AM, Felipe Balbi ba...@ti.com wrote:
Hi,
On Wed, Sep 19, 2012 at 10:02:48AM -0500, Sonasath, Moiz wrote:
Felipe,
On Wed, Sep 19, 2012 at 6:53 AM, Felipe Balbi ba...@ti.com
Hi again,
On Wed, Sep 19, 2012 at 08:24:44PM +0300, Felipe Balbi wrote:
at minimum this should've come with a proper revision check anyway.
Actually most of it is under a rev check :)
fair enough.
one extra comment here. That revision check is not related to the
silicon errata you
