From: Andrei Emeltchenko <andrei.emeltche...@nokia.com>
Use definitions defined in serial_reg
Signed-off-by: Andrei Emeltchenko <andrei.emeltche...@nokia.com>
---
arch/arm/plat-omap/include/plat/omap-serial.h | 3 ---
drivers/serial/omap-serial.c | 6 +++---
2 files changed, 3 insertions(+), 6 deletions(-)
diff --git a/arch/arm/plat-omap/include/plat/omap-serial.h
b/arch/arm/plat-omap/include/plat/omap-serial.h
index c8dae02..6a17880 100644
--- a/arch/arm/plat-omap/include/plat/omap-serial.h
+++ b/arch/arm/plat-omap/include/plat/omap-serial.h
@@ -31,9 +31,6 @@
*/
#define OMAP_SERIAL_NAME "ttyO"
-#define OMAP_MDR1_DISABLE 0x07
-#define OMAP_MDR1_MODE13X 0x03
-#define OMAP_MDR1_MODE16X 0x00
#define OMAP_MODE13X_SPEED 230400
/*
diff --git a/drivers/serial/omap-serial.c b/drivers/serial/omap-serial.c
index 14365f7..03a96db 100644
--- a/drivers/serial/omap-serial.c
+++ b/drivers/serial/omap-serial.c
@@ -753,7 +753,7 @@ serial_omap_set_termios(struct uart_port *port, struct
ktermios *termios,
/* Protocol, Baud Rate, and Interrupt Settings */
- serial_out(up, UART_OMAP_MDR1, OMAP_MDR1_DISABLE);
+ serial_out(up, UART_OMAP_MDR1, UART_OMAP_MDR1_DISABLE);
serial_out(up, UART_LCR, OMAP_UART_LCR_CONF_MDB);
up->efr = serial_in(up, UART_EFR);
@@ -774,9 +774,9 @@ serial_omap_set_termios(struct uart_port *port, struct
ktermios *termios,
serial_out(up, UART_LCR, cval);
if (baud > 230400 && baud != 3000000)
- serial_out(up, UART_OMAP_MDR1, OMAP_MDR1_MODE13X);
+ serial_out(up, UART_OMAP_MDR1, UART_OMAP_MDR1_13X_MODE);
else
- serial_out(up, UART_OMAP_MDR1, OMAP_MDR1_MODE16X);
+ serial_out(up, UART_OMAP_MDR1, UART_OMAP_MDR1_16X_MODE);
/* Hardware Flow Control Configuration */
--
1.7.0.4
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
