* Tony Lindgren t...@atomide.com [100113 09:32]:
* Russell King - ARM Linux li...@arm.linux.org.uk [100113 05:39]:
While trying to boot the latest kernel on the LDP platform, it appears
that MMC has a problem.
Unfortunately, being a small form factor card, the only platform I have
* Russell King - ARM Linux li...@arm.linux.org.uk [100113 05:39]:
While trying to boot the latest kernel on the LDP platform, it appears
that MMC has a problem.
Unfortunately, being a small form factor card, the only platform I have
which accepts it is the LDP. Not sure if this is down to
-Original Message-
From: linux-omap-ow...@vger.kernel.org
[mailto:linux-omap-ow...@vger.kernel.org] On Behalf Of Christensen, Mikkel
Sent: Monday, April 20, 2009 3:28 PM
To: linux-omap@vger.kernel.org
Subject: LDP broken in 2.6.30-rc 2
I cloned master a few days ago and when I boot up
Op 20 apr 2009, om 22:28 heeft Christensen, Mikkel het volgende
geschreven:
I cloned master a few days ago and when I boot up the OMAP3 LDP, the
board seem to hang in the i2c /dev entries driver dialog and after
a minute the kernel dumps. Have anybody else seen this problem?
LDP was
: linux-omap@vger.kernel.org
Subject: Re: LDP broken in 2.6.30-rc 2
Op 20 apr 2009, om 22:28 heeft Christensen, Mikkel het volgende
geschreven:
I cloned master a few days ago and when I boot up the OMAP3 LDP, the
board seem to hang in the i2c /dev entries driver dialog and after
a minute
Hi,
I cloned master a few days ago and when I boot up the OMAP3 LDP, the board seem
to hang in the i2c /dev entries driver dialog and after a minute the kernel
dumps. Have anybody else seen this problem?
Log is below.
Best regards,
Mikkel
Bytes transferred = 1851164 (1c3f1c hex)
##
-Original Message-
From: linux-omap-ow...@vger.kernel.org
[mailto:linux-omap-ow...@vger.kernel.org] On Behalf Of
Christensen, Mikkel
Sent: Monday, April 20, 2009 3:28 PM
To: linux-omap@vger.kernel.org
Subject: LDP broken in 2.6.30-rc 2
Hi,
I cloned master a few days ago and when I
On today's Linux-omap tony GIT tree I can see that LDP is broken:
Any comments.
snip
6OMAP DMA hardware revision 4.0
3USB: No board-specific platform config found
6i2c_omap i2c_omap.1: bus 1 rev3.12 at 2600 kHz
6i2c_omap i2c_omap.2: bus 2 rev3.12 at 400 kHz
6i2c_omap i2c_omap.3: bus 3 rev3.12 at
On Tue, Sep 02, 2008 at 05:56:55PM +0530, Vikram Pandita wrote:
On today's Linux-omap tony GIT tree I can see that LDP is broken:
Any comments.
snip
6OMAP DMA hardware revision 4.0
3USB: No board-specific platform config found
6i2c_omap i2c_omap.1: bus 1 rev3.12 at 2600 kHz
6i2c_omap