Hi,
On Tue, Oct 18 2011, Subhash Jadavani wrote:
> Chris,
>
> I had already posted the proper patch with signed off:
> http://permalink.gmane.org/gmane.linux.ports.arm.msm/1875
Thanks, you're right. I've pushed it to mmc-next for 3.2 now,
after changing the 0x2 over to UHS_SDR50_BUS_SPEED.
- Ch
; Cc: 'Hiremath, Vaibhav'; 'Nath, Arindam'; 'Hebbar, Gururaja'; linux-
> m...@vger.kernel.org; linux-omap@vger.kernel.org; prak...@marvell.com;
> zhangfei....@marvell.com; 'Saxena, Parth'
> Subject: Re: Linux v3.1-rc8 : SDHC card do not switch to high
Hi Subhash,
On Tue, Oct 18 2011, Subhash Jadavani wrote:
> Arindam,
> No, I had not posted the final version of the patch. Chris wanted to use
> some macros instead of magic numbers.
> One mentioned by Vaibhav
> (http://www.mail-archive.com/linux-mmc@vger.kernel.org/msg09358.html) is the
> last pa
g
> Cc: linux-omap@vger.kernel.org; prak...@marvell.com;
> prak...@marvell.com; zhangfei@marvell.com; c...@laptop.org; Saxena,
> Parth
> Subject: RE: Linux v3.1-rc8 : SDHC card do not switch to high speed
> mode
>
>
> > -Original Message-
> > From: Nath, Ari
rak...@marvell.com;
> zhangfei@marvell.com; c...@laptop.org; Saxena, Parth
> Subject: RE: Linux v3.1-rc8 : SDHC card do not switch to high speed mode
>
> +Subhash
>
> Hi Subhash,
>
> If I am not mistaken, there was patch by you couple of weeks back to fix
> the issue. Did yo
ctober 17, 2011 8:19 PM
> To: Hebbar, Gururaja; linux-...@vger.kernel.org
> Cc: linux-omap@vger.kernel.org; Nath, Arindam; prak...@marvell.com;
> prak...@marvell.com; zhangfei@marvell.com; c...@laptop.org; Saxena,
> Parth
> Subject: RE: Linux v3.1-rc8 : SDHC card do not swi
> -Original Message-
> From: linux-omap-ow...@vger.kernel.org [mailto:linux-omap-
> ow...@vger.kernel.org] On Behalf Of Hebbar, Gururaja
> Sent: Thursday, October 13, 2011 8:19 PM
> To: linux-...@vger.kernel.org
> Cc: linux-omap@vger.kernel.org
> Subject: Linux v3.1-r
Hi all,
We are porting existing OMAP HSMMC driver (omap_hsmmc.c) to an upcoming SOC.
When testing the driver with SanDisk 16GB SDHC Card (SanDisk Extreme HD Video
16GB 20Mb/s), we observed that the card doesn't switch to High Speed mode.
The card shows that it is compatible with SDA spec3.
Hi all,
We are porting existing OMAP HSMMC driver (omap_hsmmc.c) to an upcoming SOC.
When testing the driver with SanDisk 16GB SDHC Card (SanDisk Extreme HD Video
16GB 20Mb/s), we observed that the card doesn't switch to High Speed mode.
The card shows that it is compatible with SDA spec3.
