On Tuesday 16 July 2013 12:53 AM, Suman Anna wrote:
On 07/15/2013 05:01 AM, Rajendra Nayak wrote:
On Monday 15 July 2013 12:14 PM, Rajendra Nayak wrote:
On Friday 12 July 2013 06:10 AM, Suman Anna wrote:
On 07/11/2013 04:59 AM, Grygorii Strashko wrote:
Hi,
On 07/11/2013 09:32 AM, Tony
Hi Aaro,
On 16.07.2013 00:56, Aaro Koskinen wrote:
Hi,
I think USB tree introduced regressions in v3.11-rc1, at least for some
OMAP devices using legacy boot.
Thanks for checking the tree so early.
I have only bisected these; I have no
idea what the real fixes are but the following
Hi Pekon,
On Mon, Jul 15, 2013 at 8:25 PM, Pekon Gupta pe...@ti.com wrote:
chip-ecc.correct() is used for detecting and correcting bit-flips during read
operations. In omap2-nand driver this is done usingt following functions:
- omap_correct_data(): for H/W based HAM1_ECC schemes
Hi,
On Tuesday 16 July 2013 12:03 PM, Daniel Mack wrote:
Hi Aaro,
On 16.07.2013 00:56, Aaro Koskinen wrote:
Hi,
I think USB tree introduced regressions in v3.11-rc1, at least for some
OMAP devices using legacy boot.
Thanks for checking the tree so early.
I have only bisected these;
Hi Pekon,
On Mon, Jul 15, 2013 at 8:25 PM, Pekon Gupta pe...@ti.com wrote:
chip-ecc.correct() is used for detecting and correcting bit-flips during
read
operations. In omap2-nand driver this is done usingt following functions:
- omap_correct_data(): for H/W based HAM1_ECC schemes
Hi,
On Tue, Jul 16, 2013 at 12:30:00PM +0530, Kishon Vijay Abraham I wrote:
On Tuesday 16 July 2013 12:03 PM, Daniel Mack wrote:
Hi Aaro,
On 16.07.2013 00:56, Aaro Koskinen wrote:
Hi,
I think USB tree introduced regressions in v3.11-rc1, at least for some
OMAP devices using legacy
On Tue, Jul 16, 2013 at 11:08:36AM +0300, Felipe Balbi wrote:
Hi,
On Tue, Jul 16, 2013 at 12:30:00PM +0530, Kishon Vijay Abraham I wrote:
On Tuesday 16 July 2013 12:03 PM, Daniel Mack wrote:
Hi Aaro,
On 16.07.2013 00:56, Aaro Koskinen wrote:
Hi,
I think USB tree introduced
Hi Vikram,
On a OMAP4460, i2c-bus-3:
A driver (lm75) is causing many 'timeout waiting for bus ready' errors.
SDA remains high (as it should), but SCL remains low after a NACK.
The bus becomes _unusable for other clients_.
While probing, lm75 writes a command, followed by a read + stop,
but the
Hi,
On Tue, Jul 16, 2013 at 04:19:35PM +0800, Hein Tibosch wrote:
Hi Vikram,
On a OMAP4460, i2c-bus-3:
A driver (lm75) is causing many 'timeout waiting for bus ready' errors.
SDA remains high (as it should), but SCL remains low after a NACK.
The bus becomes _unusable for other clients_.
Hi all,
As discussed earlier, the pinctrl support for changing some of the
consumer device pins during runtime needs some improvment.
Here are the patches to do that, I'll also post a minimal sample
patch as a reply to this thread on how to do the muxing for
runtime PM.
Regards,
Tony
---
There's no need to duplicate essentially the same functions. Let's
introduce static int pinctrl_pm_select_state() and make the other
related functions call that.
This allows us to add support later on for multiple active states,
and more optimized dynamic remuxing.
Note that we still need to
It's quite common that we need to dynamically change some pins for a
device for runtime PM, or toggle a pin between rx and tx. Changing all
the pins for a device is not efficient way of doing it.
So let's allow setting up multiple active states for pinctrl. Currently
we only need PINCTRL_STATIC
We want to have static pin states handled separately from
dynamic pin states, so let's add optional state_active.
Then if state_active is defined, let's check and make sure
state_idle and state_sleep match state_active for the
pin groups to avoid checking them during runtime as the
active and
To toggle dynamic states, let's add the optional active state in
addition to the static default state. Then if the optional active
state is defined, we can require that idle and sleep states cover
the same pingroups as the active state.
Then let's add pinctrl_check_dynamic() and
Hi Linus,
Here's a pull request for the pinctrl-single changes posted
few weeks ago. Assuming this pull request and the patches
are OK, I'd like to also merge this branch into omap tree so
we can have the wake-up events working. So we'd have to
establish keeping these commits immutable.
Note
* Lokesh Vutla lokeshvu...@ti.com [130715 21:19]:
Hi Jacob,
On Tuesday 16 July 2013 06:15 AM, Jacob Minshall wrote:
When trying to boot a Panda Board ES Rev B1 with the 3.11-rc1 kernel,
the boot does not work. All that happens is pasted below, and then it
just hangs there not actually
Hi,
On Tue, Jul 16, 2013 at 02:05:36AM -0700, Tony Lindgren wrote:
+int pinctrl_check_dynamic(struct device *dev, struct pinctrl_state *st1,
+ struct pinctrl_state *st2)
+{
+ struct pinctrl_setting *s1, *s2;
+
+ list_for_each_entry(s1, st1-settings, node) {
+
Hi,
On Tue, Jul 16, 2013 at 05:33:47PM +0800, Hein Tibosch wrote:
On 7/16/2013 5:03 PM, Felipe Balbi wrote:
Hi,
On Tue, Jul 16, 2013 at 04:19:35PM +0800, Hein Tibosch wrote:
Hi Vikram,
On a OMAP4460, i2c-bus-3:
A driver (lm75) is causing many 'timeout waiting for bus ready'
On 7/16/2013 5:03 PM, Felipe Balbi wrote:
Hi,
On Tue, Jul 16, 2013 at 04:19:35PM +0800, Hein Tibosch wrote:
Hi Vikram,
On a OMAP4460, i2c-bus-3:
A driver (lm75) is causing many 'timeout waiting for bus ready' errors.
SDA remains high (as it should), but SCL remains low after a NACK.
The
Hi Rajendra,
On 07/11/2013 12:17 PM, Rajendra Nayak wrote:
On Wednesday 10 July 2013 09:37 PM, Felipe Balbi wrote:
how about something like below ? It makes omap_device/hwmod and
pm_runtime agree on the initial state of the device and will prevent
-runtime_resume() from being called on first
Hi Hein, Felipe
On 07/16/2013 12:42 PM, Felipe Balbi wrote:
Hi,
On Tue, Jul 16, 2013 at 05:33:47PM +0800, Hein Tibosch wrote:
On 7/16/2013 5:03 PM, Felipe Balbi wrote:
Hi,
On Tue, Jul 16, 2013 at 04:19:35PM +0800, Hein Tibosch wrote:
Hi Vikram,
On a OMAP4460, i2c-bus-3:
A driver (lm75)
GPADC is the general purpose ADC present on twl6030.
The dt data is interrupt used to trigger end of ADC
conversion.
Signed-off-by: Oleksandr Kozaruk oleksandr.koza...@ti.com
---
arch/arm/boot/dts/twl6030.dtsi | 6 ++
1 file changed, 6 insertions(+)
diff --git
Hi,
On Tue, Jul 16, 2013 at 02:01:11PM +0300, Grygorii Strashko wrote:
On a OMAP4460, i2c-bus-3:
A driver (lm75) is causing many 'timeout waiting for bus ready' errors.
SDA remains high (as it should), but SCL remains low after a NACK.
The bus becomes _unusable for other clients_.
While
The GPADC is general purpose ADC found on TWL6030, and TWL6032 PMIC,
known also as Phoenix and PhoenixLite.
The TWL6030 and TWL6032 have GPADC with 17 and 19 channels
respectively. Some channels have current source and are used for
measuring voltage drop on resistive load for detecting battery ID
Hello,
v4 - addressed comments: fixed style violation, bug in freeing memory,
added comments explaining calibration method, removed test network
channels from exposing to userspace, error handling for
wait_for_complition
v3 - fixed compiler warning
v2 - the driver put in
GPADC is the general purpose ADC present on twl6030.
The dt data is interrupt used to trigger end of ADC
conversion.
Signed-off-by: Oleksandr Kozaruk oleksandr.koza...@ti.com
---
arch/arm/boot/dts/twl6030.dtsi | 6 ++
1 file changed, 6 insertions(+)
diff --git
The GPADC is general purpose ADC found on TWL6030, and TWL6032 PMIC,
known also as Phoenix and PhoenixLite.
The TWL6030 and TWL6032 have GPADC with 17 and 19 channels
respectively. Some channels have current source and are used for
measuring voltage drop on resistive load for detecting battery ID
Hello,
v4 - addressed comments: fixed style violation, bug in freeing memory,
added comments explaining calibration method, removed test network
channels from exposing to userspace, error handling for
wait_for_complition
v3 - fixed compiler warning
v2 - the driver put in
GPADC is the general purpose ADC present on twl6030.
The dt data is interrupt used to trigger end of ADC
conversion.
Signed-off-by: Oleksandr Kozaruk oleksandr.koza...@ti.com
---
arch/arm/boot/dts/twl6030.dtsi | 6 ++
1 file changed, 6 insertions(+)
diff --git
The GPADC is general purpose ADC found on TWL6030, and TWL6032 PMIC,
known also as Phoenix and PhoenixLite.
The TWL6030 and TWL6032 have GPADC with 17 and 19 channels
respectively. Some channels have current source and are used for
measuring voltage drop on resistive load for detecting battery ID
* Felipe Balbi ba...@ti.com [130716 02:42]:
Hi,
On Tue, Jul 16, 2013 at 02:05:36AM -0700, Tony Lindgren wrote:
+int pinctrl_check_dynamic(struct device *dev, struct pinctrl_state *st1,
+ struct pinctrl_state *st2)
+{
+ struct pinctrl_setting *s1, *s2;
+
+
Hi Felipe,
On 07/16/2013 02:27 PM, Felipe Balbi wrote:
Hi,
On Tue, Jul 16, 2013 at 02:01:11PM +0300, Grygorii Strashko wrote:
On a OMAP4460, i2c-bus-3:
A driver (lm75) is causing many 'timeout waiting for bus ready' errors.
SDA remains high (as it should), but SCL remains low after a NACK.
From: Wei Yongjun yongjun_...@trendmicro.com.cn
Fix to return a negative error code from the error handling
case instead of 0, as done elsewhere in this function.
Signed-off-by: Wei Yongjun yongjun_...@trendmicro.com.cn
---
arch/arm/plat-omap/dma.c | 1 +
1 file changed, 1 insertion(+)
diff
* Felipe Balbi ba...@ti.com [130715 08:52]:
On Mon, Jul 15, 2013 at 09:13:32PM +0530, Kishon Vijay Abraham I wrote:
Hi,
On Monday 15 July 2013 09:03 PM, Felipe Balbi wrote:
From: Benoit Cousson benoit.cous...@linaro.org
without that hwmod data, USB3 will not in OMAP5 boards.
* Roger Quadros rog...@ti.com [130715 07:11]:
Hi Tony,
On 06/18/2013 07:04 PM, Roger Quadros wrote:
Till the OMAP clocks are correctly defined in device tree, use
this temporary hack to provide clock alias to the USB PHY clocks.
Without this, USB Host Ethernet will not be functional
Hi,
trying to get USB host verified on OMAP5 uEVM with v3.11-rc1. The
clk_set_rate() call ends up in a division by zero, which is quite
interesting provided the driver will only call clk_set_rate() if the
clock is valid and clk_rate is != 0.
[ 22.009238] Division by zero in kernel.
[
Hi Greg,
Here's the pull request for the PHY Framework which I've been working on for a
while.
I've applied these patches on the current linux mainline HEAD (which has one
commit after 3.11-rc1 is tagged).
Even before this framework is merged, quite a few people started using it. I've
queued
Hi,
On Tue, Jul 16, 2013 at 11:22:38AM +0530, Kishon Vijay Abraham I wrote:
Tony,
On Monday 08 July 2013 04:44 PM, Kishon Vijay Abraham I wrote:
This series fixes the USB enumeration issue caused because of the controller
not able to get a reference to the PHY because of incorrect binding
* Kishon Vijay Abraham I kis...@ti.com [130708 04:20]:
In order for controllers to get PHY in case of non dt boot, the phy
binding information (phy label) should be added in the platform
data of the controller.
Signed-off-by: Kishon Vijay Abraham I kis...@ti.com
Acked-by: Felipe Balbi
DWC3 enables USB3 functionality for OMAP5 boards,
it's safe to enable those drivers in omap2plus_defconfig.
Signed-off-by: Felipe Balbi ba...@ti.com
---
arch/arm/configs/omap2plus_defconfig | 9 +
1 file changed, 9 insertions(+)
diff --git a/arch/arm/configs/omap2plus_defconfig
Without this node, there will be no palmas
driver to notify dwc3 that a cable has
been connected and, without that, dwc3
will never initialize.
Signed-off-by: Felipe Balbi ba...@ti.com
---
arch/arm/boot/dts/omap5-uevm.dts | 10 ++
arch/arm/boot/dts/omap5.dtsi | 2 +-
2 files
From: Benoit Cousson benoit.cous...@linaro.org
without that hwmod data, USB3 will not in OMAP5 boards.
Signed-off-by: Benoit Cousson benoit.cous...@linaro.org
Signed-off-by: Felipe Balbi ba...@ti.com
---
arch/arm/mach-omap2/omap_hwmod_54xx_data.c | 45 ++
1 file
USB3 block has a 64KiB space, another 64KiB is
used for the wrapper.
Without this change, resource_size() will get
confused and driver won't probe because size
will be negative.
Signed-off-by: Felipe Balbi ba...@ti.com
---
arch/arm/boot/dts/omap5.dtsi | 4 ++--
1 file changed, 2 insertions(+),
* Kishon Vijay Abraham I kis...@ti.com [130708 04:21]:
Now that MUSB for OMAP started using devm_usb_get_phy_by_name
which does not require PHY library to already have the binding
information, removed usb_bind_phy calls that binds the MUSB controller
with the PHY from the board files.
* Felipe Balbi ba...@ti.com [130716 05:49]:
Hi,
On Tue, Jul 16, 2013 at 11:22:38AM +0530, Kishon Vijay Abraham I wrote:
Tony,
On Monday 08 July 2013 04:44 PM, Kishon Vijay Abraham I wrote:
This series fixes the USB enumeration issue caused because of the
controller
not able to
this patch fixes the DTS data for ocp2scp
node by adding the missing reg property.
Signed-off-by: Felipe Balbi ba...@ti.com
---
arch/arm/boot/dts/omap5.dtsi | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi
index
With these patches (plus a few others on the driver side which
will be going upstream soon) I could get functional USB3 with my
omap5-uevm platform.
Changes since v1:
- split ocp2scp dts and hwmod data into separate patches
- reorganize the series in order to group DTS, hwmod and
Hi,
(when replying, can you add some blank lines around your reply and the
previous mail, it's quite difficult to find your replies with so many
quote marks () around)
On Tue, Jul 16, 2013 at 03:08:04PM +0300, Grygorii Strashko wrote:
Hi Felipe,
On 07/16/2013 02:27 PM, Felipe Balbi wrote:
Hi,
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA256
Hi,
Adding Mike's correct address.
On 16-07-2013 08:37, Felipe Balbi wrote:
Hi,
trying to get USB host verified on OMAP5 uEVM with v3.11-rc1. The
clk_set_rate() call ends up in a division by zero, which is quite
interesting provided the
On 07/15/2013 04:05 PM, Roger Quadros wrote:
Hi Tony,
On 06/18/2013 07:04 PM, Roger Quadros wrote:
Till the OMAP clocks are correctly defined in device tree, use
this temporary hack to provide clock alias to the USB PHY clocks.
Without this, USB Host Ethernet will not be functional with
Hi Tony,
This patch causes boot failure when I've applied my patch
[RFC] ARM: OMAP2+: omap_device: add pinctrl handling
https://lkml.org/lkml/2013/6/21/309
on top of it:
[0.264007] L310 cache controller enabled
[0.268310] l2x0: 16 ways, CACHE_ID 0x41c4, AUX_CTRL 0x7e47,
Cache
On 07/16/2013 03:12 PM, Arend van Spriel wrote:
On 07/15/2013 04:05 PM, Roger Quadros wrote:
Hi Tony,
On 06/18/2013 07:04 PM, Roger Quadros wrote:
Till the OMAP clocks are correctly defined in device tree, use
this temporary hack to provide clock alias to the USB PHY clocks.
Without this,
On 07/16/2013 03:32 PM, Tony Lindgren wrote:
* Roger Quadros rog...@ti.com [130715 07:11]:
Hi Tony,
On 06/18/2013 07:04 PM, Roger Quadros wrote:
Till the OMAP clocks are correctly defined in device tree, use
this temporary hack to provide clock alias to the USB PHY clocks.
Without this,
* Grygorii Strashko grygorii.stras...@ti.com [130716 06:22]:
Hi Tony,
This patch causes boot failure when I've applied my patch
[RFC] ARM: OMAP2+: omap_device: add pinctrl handling
https://lkml.org/lkml/2013/6/21/309
on top of it:
Hmm this patch alone removes duplicate code and if it
* Roger Quadros rog...@ti.com [130716 06:45]:
On 07/16/2013 03:32 PM, Tony Lindgren wrote:
* Roger Quadros rog...@ti.com [130715 07:11]:
Hi Tony,
On 06/18/2013 07:04 PM, Roger Quadros wrote:
Till the OMAP clocks are correctly defined in device tree, use
this temporary hack to provide
Hello.
On 07/16/2013 03:34 PM, Oleksandr Kozaruk wrote:
GPADC is the general purpose ADC present on twl6030.
The dt data is interrupt used to trigger end of ADC
conversion.
Signed-off-by: Oleksandr Kozaruk oleksandr.koza...@ti.com
---
arch/arm/boot/dts/twl6030.dtsi | 6 ++
1 file
commit 3c870e3f9d9d98f1ab98614b3b1fd5c79287d361
(regulator: palmas: Change the DT node property names to follow the convention)
Missed updating mode-sleep from sleep-mode. Fix the same.
Documentation seems proper for this property.
Signed-off-by: Nishanth Menon n...@ti.com
---
We seem to have a few missing updates to device tree bindings with the
latest set of changes getting merged in.
Based on v3.11-rc1 tag
Nishanth Menon (2):
regulator: palmas-pmic: doc: fix typo for sleep-mode
regulator: palmas-pmic: doc: remove ti,tstep
Hi Tony,
On 07/16/2013 04:41 PM, Tony Lindgren wrote:
* Grygorii Strashko grygorii.stras...@ti.com [130716 06:22]:
Hi Tony,
This patch causes boot failure when I've applied my patch
[RFC] ARM: OMAP2+: omap_device: add pinctrl handling
https://lkml.org/lkml/2013/6/21/309
on top of it:
Hmm
commit 28d1e8cd671a53d6b4f967abbbc2a55f7bd333f6
(regulator: palma: add ramp delay support through regulator constraints)
Removed the regulator's ti,step option from driver without updating the
documentation. remove the support from documentation and example as well.
Signed-off-by: Nishanth Menon
On 09:23-20130716, Nishanth Menon wrote:
We seem to have a few missing updates to device tree bindings with the
latest set of changes getting merged in.
Oops.. seems like I have an old mailID for Mark :(
Based on v3.11-rc1 tag
Nishanth Menon (2):
regulator: palmas-pmic: doc: fix typo
+Alan
On 07/15/2013 11:24 AM, Stefan Roese wrote:
On 07/15/2013 10:16 AM, Roger Quadros wrote:
I can only test on beagle-xm (which is also rev. C2) with integrated SMSC
ethernet chip
as I don't have an external USB-ethernet adapter.
Too bad. This difference in boards makes the tests a bit
Hi Roger,
On 07/16/2013 04:37 PM, Roger Quadros wrote:
On 07/15/2013 11:24 AM, Stefan Roese wrote:
On 07/15/2013 10:16 AM, Roger Quadros wrote:
I can only test on beagle-xm (which is also rev. C2) with integrated SMSC
ethernet chip
as I don't have an external USB-ethernet adapter.
Too
Hi Grygorii, Filipe,
On 7/16/2013 9:00 PM, Felipe Balbi wrote:
On Tue, Jul 16, 2013 at 03:08:04PM +0300, Grygorii Strashko wrote:
Hi Felipe,
On 07/16/2013 02:27 PM, Felipe Balbi wrote:
Hi,
On Tue, Jul 16, 2013 at 02:01:11PM +0300, Grygorii Strashko wrote:
On a OMAP4460, i2c-bus-3:
A
On Tue, Jul 16, 2013 at 09:27:10AM -0500, Nishanth Menon wrote:
On 09:23-20130716, Nishanth Menon wrote:
We seem to have a few missing updates to device tree bindings with the
latest set of changes getting merged in.
Oops.. seems like I have an old mailID for Mark :(
I'll need the actual
commit 3c870e3f9d9d98f1ab98614b3b1fd5c79287d361
(regulator: palmas: Change the DT node property names to follow the convention)
Missed updating mode-sleep from sleep-mode. Fix the same.
Documentation example seems proper for this property.
Signed-off-by: Nishanth Menon n...@ti.com
---
commit 28d1e8cd671a53d6b4f967abbbc2a55f7bd333f6
(regulator: palma: add ramp delay support through regulator constraints)
Removed the regulator's ti,step option from driver without updating the
documentation.
So, remove from documentation and example as well.
Signed-off-by: Nishanth Menon
We seem to have a few missing updates to device tree bindings with the
latest set of changes getting merged in.
Changes since V1:
Apologies on the spam, looks like I got the wrong mail ID first time
around :(
minor commit message cleanups
V1:
Hi,
On Tue, Jul 16, 2013 at 08:33:06AM +0200, Daniel Mack wrote:
fe4cb0912f8e737f8e4b8b38b9e692f8062f5423
usb: musb: gadget: remove hcd initialization
(Reverting this fixes error cdc_ether: probe of 4-1:1.0 failed
with error -110 seen on the host side.)
Which role does
On Tue, Jul 16, 2013 at 6:10 AM, Eduardo Valentin
eduardo.valen...@ti.com wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA256
Hi,
Adding Mike's correct address.
On 16-07-2013 08:37, Felipe Balbi wrote:
Hi,
trying to get USB host verified on OMAP5 uEVM with v3.11-rc1. The
Hi,
On Tue, Jul 16, 2013 at 11:22:47AM +0300, Felipe Balbi wrote:
On Tue, Jul 16, 2013 at 12:30:00PM +0530, Kishon Vijay Abraham I wrote:
On Tuesday 16 July 2013 12:03 PM, Daniel Mack wrote:
Hi Aaro,
On 16.07.2013 00:56, Aaro Koskinen wrote:
Hi,
I think USB tree
On 16.07.2013 20:26, Aaro Koskinen wrote:
Hi,
On Tue, Jul 16, 2013 at 11:22:47AM +0300, Felipe Balbi wrote:
On Tue, Jul 16, 2013 at 12:30:00PM +0530, Kishon Vijay Abraham I wrote:
On Tuesday 16 July 2013 12:03 PM, Daniel Mack wrote:
Hi Aaro,
On 16.07.2013 00:56, Aaro Koskinen wrote:
Hi,
On Tue, Jul 16, 2013 at 08:30:21PM +0200, Daniel Mack wrote:
On 16.07.2013 20:26, Aaro Koskinen wrote:
Hi,
On Tue, Jul 16, 2013 at 11:22:47AM +0300, Felipe Balbi wrote:
On Tue, Jul 16, 2013 at 12:30:00PM +0530, Kishon Vijay Abraham I wrote:
On Tuesday 16 July 2013 12:03 PM, Daniel Mack
From: Matt Porter m...@ti.com
Adds AM33XX EDMA support to the am33xx.dtsi as documented in
Documentation/devicetree/bindings/dma/ti-edma.txt
Joel: Drop DT entries that are non-hardware-description for now as discussed in
[1]
[1] https://patchwork.kernel.org/patch/2226761/
Signed-off-by: Matt
From: Matt Porter mpor...@ti.com
Adds DMA resources to the AM33XX SPI nodes.
Signed-off-by: Matt Porter mpor...@ti.com
Signed-off-by: Joel A Fernandes joelag...@ti.com
---
arch/arm/boot/dts/am33xx.dtsi | 10 ++
1 file changed, 10 insertions(+)
diff --git
From: Mark A. Greer mgr...@animalcreek.com
Add the generic AM33XX SHAM module's device tree data and
enable it for the am335x-evm, am335x-evmsk, and am335x-bone
platforms. Also add Documentation file describing the data
for the SHAM module.
CC: Paul Walmsley p...@pwsan.com
Signed-off-by: Mark
From: Mark A. Greer mgr...@animalcreek.com
Long overdue patches to add the device tree updates and
documentation for the SHAM and AES modules on the am33xx.
The supporting code is already in the mainline kernel.
Mark A. Greer (2):
ARM: dts: Add SHAM data and documentation for AM33XX
ARM:
On 07/16/2013 06:29 PM, Mark A. Greer wrote:
From: Mark A. Greer mgr...@animalcreek.com
Add the generic AM33XX SHAM module's device tree data and
enable it for the am335x-evm, am335x-evmsk, and am335x-bone
platforms. Also add Documentation file describing the data
for the SHAM module.
On 07/16/2013 06:29 PM, Mark A. Greer wrote:
From: Mark A. Greer mgr...@animalcreek.com
Add the generic AM33XX AES module's device tree data and
enable it for the am335x-evm, am335x-evmsk, and am335x-bone
platforms. Also add Documentation file describing the data
for the AES module.
CC:
On Tue, Jul 16, 2013 at 06:08:26PM +0530, Kishon Vijay Abraham I wrote:
Hi Greg,
Here's the pull request for the PHY Framework which I've been working on for a
while.
I've applied these patches on the current linux mainline HEAD (which has one
commit after 3.11-rc1 is tagged).
Even
Hi Mark,
On Wednesday 17 July 2013 04:59 AM, Mark A. Greer wrote:
From: Mark A. Greer mgr...@animalcreek.com
Add the generic AM33XX SHAM module's device tree data and
enable it for the am335x-evm, am335x-evmsk, and am335x-bone
platforms. Also add Documentation file describing the data
for
81 matches
Mail list logo
