On Mon, Oct 21, 2013 at 03:13:22PM -0500, Felipe Balbi wrote:
Hi,
the following patches fix a typo on TSC/ADC DT binding while
maintaining backwards compatibility and add support for the
touchscreen available on am335x-evm-sk.
Patches have been tested with am335x-evm-sk with a couple
Since suggested by gregkh, here a CC.
Greets,
Tobias
EDIT:
Oops, I totally missed the most important bit:
https://bugzilla.kernel.org/show_bug.cgi?id=64771
--
To unsubscribe from this list: send the line unsubscribe linux-omap in
the body of a message to majord...@vger.kernel.org
More majordomo
Hi Joel,
I realise I'm a little late in replying to this, but there are a few
things that would be nice to fix up.
On Fri, Nov 08, 2013 at 12:37:09AM +, Joel Fernandes wrote:
Add documentation for the generic OMAP DES crypto module describing the device
tree bindings.
Signed-off-by:
Hi,
On 2013-11-05 09:24, Belisko Marek wrote:
Hi,
ping.
On Mon, Oct 14, 2013 at 11:02 PM, Marek Belisko ma...@goldelico.com wrote:
This patches is adding bypass and acbias functionality to omapdss venc
driver.
In first patch we export updatin bypass and acbias in devconf1 register.
On 2013-11-06 23:24, Aaro Koskinen wrote:
When booting Nokia N900 smartphone with v3.12 + omap2plus_defconfig
(LOCKDEP enabled) and CONFIG_DISPLAY_PANEL_SONY_ACX565AKM enabled,
the following BUG is seen during the boot:
[7.302154] =
[7.307128] [
Hi Tomi,
Am 11.11.2013 um 14:29 schrieb Tomi Valkeinen:
Hi,
On 2013-11-05 09:24, Belisko Marek wrote:
Hi,
ping.
On Mon, Oct 14, 2013 at 11:02 PM, Marek Belisko ma...@goldelico.com wrote:
This patches is adding bypass and acbias functionality to omapdss venc
driver.
In first patch
On 2013-11-11 15:57, Dr. H. Nikolaus Schaller wrote:
Hi Tomi,
Am 11.11.2013 um 14:29 schrieb Tomi Valkeinen:
Hi,
On 2013-11-05 09:24, Belisko Marek wrote:
Hi,
ping.
On Mon, Oct 14, 2013 at 11:02 PM, Marek Belisko ma...@goldelico.com wrote:
This patches is adding bypass and acbias
Am 11.11.2013 um 15:13 schrieb Tomi Valkeinen:
On 2013-11-11 15:57, Dr. H. Nikolaus Schaller wrote:
Hi Tomi,
Am 11.11.2013 um 14:29 schrieb Tomi Valkeinen:
Hi,
On 2013-11-05 09:24, Belisko Marek wrote:
Hi,
ping.
On Mon, Oct 14, 2013 at 11:02 PM, Marek Belisko
Hi Felipe,
On Thursday 17 October 2013 10:08 PM, Felipe Balbi wrote:
Hi,
On Wed, Oct 16, 2013 at 01:24:11AM +0530, Kishon Vijay Abraham I wrote:
There can be systems which does not have a external usb_phy, so get
usb_phy only if dt data indicates the presence of PHY in the case of dt boot
Am 11.11.2013 um 15:13 schrieb Tomi Valkeinen:
On 2013-11-11 15:57, Dr. H. Nikolaus Schaller wrote:
Hi Tomi,
Am 11.11.2013 um 14:29 schrieb Tomi Valkeinen:
Hi,
On 2013-11-05 09:24, Belisko Marek wrote:
Hi,
ping.
On Mon, Oct 14, 2013 at 11:02 PM, Marek Belisko
On Sat, Nov 9, 2013 at 5:53 AM, Sricharan R r.sricha...@ti.com wrote:
Hi Rob,
On Saturday 09 November 2013 03:24 AM, Rob Herring wrote:
On Fri, Nov 8, 2013 at 4:38 AM, Sricharan R r.sricha...@ti.com wrote:
The binding and support for system DMA module present in OMAP2+ Socs
and DRA7 with
On Monday 11 November 2013 09:26 PM, Rob Herring wrote:
On Sat, Nov 9, 2013 at 5:53 AM, Sricharan R r.sricha...@ti.com wrote:
Hi Rob,
On Saturday 09 November 2013 03:24 AM, Rob Herring wrote:
On Fri, Nov 8, 2013 at 4:38 AM, Sricharan R r.sricha...@ti.com wrote:
The binding and support for
The binding and support for omap5-mpu which has a cortex-a15
smp core, gic and integrated L2 cache has been existing for sometime.
So Documenting the missing binding here.
Cc: Benoit Cousson bcous...@baylibre.com
Signed-off-by: Sricharan R r.sricha...@ti.com
---
The binding and support for system DMA module present in OMAP2+ Socs
and DRA7 with dma-engine is already present. So adding the missing
documentation for the same.
Signed-off-by: Sricharan R r.sricha...@ti.com
---
[V2] Fixed comments from Rob Herring robherri...@gmail.com
On 16:38-20131107, Kevin Hilman wrote:
[...]
That's debatable I guess. The ideal world is that runtime PM hides all
of this, but I'm not sure it's achievable in all cases.
Agreed. some drivers like edma need to save and restore context around
suspend.
[...]
No, that sysfs knob is for
On 11/08/2013 11:00 AM, Felipe Balbi wrote:
From: Luciano Coelho l...@coelho.fi
Add a flag that indicate whether the clock is a crystal or not.
Additionally, parse a new device tree binding in clk-fixed-rate to set
this flag.
If clock-xtal isn't set, the clock framework will assume
* Marek Belisko ma...@goldelico.com [131014 14:11]:
devconf1 reg access is localized only in mach-omap2 and we need to export
updating of devconf1 from omapdss venc driver (bypass and acbias bits).
Add simple api call which update only necessary bits.
...
+void update_bypass_acbias(bool
* Dr. H. Nikolaus Schaller h...@goldelico.com [13 06:30]:
Am 11.11.2013 um 15:13 schrieb Tomi Valkeinen:
On 2013-11-11 15:57, Dr. H. Nikolaus Schaller wrote:
The display.c file is not strictly DSS stuff, but DSS related glue for
the SoC. For example, the muxing of the DSI pads is also
* Sebastian Reichel s...@ring0.de [131110 15:48]:
Hi Tony,
On Thu, Oct 17, 2013 at 03:15:22PM -0700, Tony Lindgren wrote:
Looks like omap3 is still relying on hwmod data for some basic
device tree information. Let's add the information to omap3.dtsi
so we can remove the related hwmod
On 11/11/2013 05:01 AM, Mark Rutland wrote:
Hi Joel,
I realise I'm a little late in replying to this, but there are a few
things that would be nice to fix up.
On Fri, Nov 08, 2013 at 12:37:09AM +, Joel Fernandes wrote:
Add documentation for the generic OMAP DES crypto module
On Mon, Nov 11, 2013 at 05:13:35PM +, Joel Fernandes wrote:
On 11/11/2013 05:01 AM, Mark Rutland wrote:
Hi Joel,
I realise I'm a little late in replying to this, but there are a few
things that would be nice to fix up.
On Fri, Nov 08, 2013 at 12:37:09AM +, Joel Fernandes
On Mon, Nov 11, 2013 at 08:56:39AM -0800, Tony Lindgren wrote:
* Sebastian Reichel s...@ring0.de [131110 15:48]:
Hi Tony,
On Thu, Oct 17, 2013 at 03:15:22PM -0700, Tony Lindgren wrote:
Looks like omap3 is still relying on hwmod data for some basic
device tree information. Let's add
* Sebastian Reichel s...@ring0.de [13 09:49]:
On Mon, Nov 11, 2013 at 08:56:39AM -0800, Tony Lindgren wrote:
* Sebastian Reichel s...@ring0.de [131110 15:48]:
Hi Tony,
On Thu, Oct 17, 2013 at 03:15:22PM -0700, Tony Lindgren wrote:
Looks like omap3 is still relying on hwmod
Hi,
On Mon, Nov 11, 2013 at 03:37:37PM +0200, Tomi Valkeinen wrote:
On 2013-11-06 23:24, Aaro Koskinen wrote:
When booting Nokia N900 smartphone with v3.12 + omap2plus_defconfig
(LOCKDEP enabled) and CONFIG_DISPLAY_PANEL_SONY_ACX565AKM enabled,
the following BUG is seen during the boot:
When booting Nokia N900 smartphone with v3.12 + omap2plus_defconfig
(LOCKDEP enabled) and CONFIG_DISPLAY_PANEL_SONY_ACX565AKM enabled,
the following BUG is seen during the boot:
[7.302154] =
[7.307128] [ BUG: bad unlock balance detected! ]
[
From: Andreas Fenkart afenk...@gmail.com
This a resend:
- incorparated changes as suggested by reviewers
- simplified workaround for am335x, gpio will now only wake
the module from runtime suspend, not handle the sdio irq
itself
Andreas Fenkart (3):
mmc: omap_hsmmc: Enable SDIO IRQ.
From: Andreas Fenkart andreas.fenk...@dev.digitalstrom.org
For now, only support SDIO interrupt if we are booted with
DT. This is because some platforms need special quirks. And
we don't want to add new legacy mux platform init code
callbacks any longer as we are moving to DT based booting
From: Andreas Fenkart andreas.fenk...@dev.digitalstrom.org
The am335x can't detect pending cirq in PM runtime suspend.
This patch reconfigures dat1 as a GPIO before going to suspend.
SDIO interrupts are detected with the GPIO, the GPIO will only wake
the module from suspend, SDIO irq detection
From: Andreas Fenkart afenk...@gmail.com
Add SDIO IRQ entries to debugfs entry. Note that PSTATE shows current
state of data lines, incl. SDIO IRQ pending
Signed-off-by: Andreas Fenkart afenk...@gmail.com
---
drivers/mmc/host/omap_hsmmc.c | 22 +-
1 file changed, 21
Hi
On Mon, Nov 11, 2013 at 7:52 PM, afenk...@gmail.com wrote:
From: Andreas Fenkart afenk...@gmail.com
Add SDIO IRQ entries to debugfs entry. Note that PSTATE shows current
state of data lines, incl. SDIO IRQ pending
Signed-off-by: Andreas Fenkart afenk...@gmail.com
---
Hi
On Mon, Nov 11, 2013 at 7:52 PM, afenk...@gmail.com wrote:
From: Andreas Fenkart andreas.fenk...@dev.digitalstrom.org
The am335x can't detect pending cirq in PM runtime suspend.
This patch reconfigures dat1 as a GPIO before going to suspend.
SDIO interrupts are detected with the GPIO,
Hi,
2013/11/11 Michael Trimarchi mich...@amarulasolutions.com:
Hi
On Mon, Nov 11, 2013 at 7:52 PM, afenk...@gmail.com wrote:
From: Andreas Fenkart afenk...@gmail.com
Add SDIO IRQ entries to debugfs entry. Note that PSTATE shows current
state of data lines, incl. SDIO IRQ pending
Hi,
On Sun, Nov 10, 2013 at 12:37:16PM +0100, Maxime Ripard wrote:
Hi Felipe,
On Fri, Nov 08, 2013 at 12:00:48PM -0600, Felipe Balbi wrote:
From: Luciano Coelho l...@coelho.fi
Add a flag that indicate whether the clock is a crystal or not.
Additionally, parse a new device tree
Hi,
On Mon, Nov 11, 2013 at 09:27:58AM -0700, Stephen Warren wrote:
On 11/08/2013 11:00 AM, Felipe Balbi wrote:
From: Luciano Coelho l...@coelho.fi
Add a flag that indicate whether the clock is a crystal or not.
Additionally, parse a new device tree binding in clk-fixed-rate to set
Add documentation for the generic OMAP DES crypto modul describing the device
tree bindings.
Reviewed-by: Mark Rutland mark.rutl...@arm.com
Acked-by: Santosh Shilimkar santosh.shilim...@ti.com
Signed-off-by: Joel Fernandes jo...@ti.com
---
v2 changes: Update documentation for clocks, clock-names
On Mon, 2013-11-11 at 13:42 -0600, Felipe Balbi wrote:
Hi,
On Sun, Nov 10, 2013 at 12:37:16PM +0100, Maxime Ripard wrote:
Hi Felipe,
On Fri, Nov 08, 2013 at 12:00:48PM -0600, Felipe Balbi wrote:
From: Luciano Coelho l...@coelho.fi
Add a flag that indicate whether the clock is
This a resend:
- incorparated changes as suggested by reviewers
- simplified workaround for am335x, gpio will now only wake
the module from runtime suspend, not handle the sdio irq
itself
Andreas Fenkart (3):
mmc: omap_hsmmc: Enable SDIO IRQ.
mmc: omap_hsmmc: Pin remux workaround to
For now, only support SDIO interrupt if we are booted with
DT. This is because some platforms need special quirks. And
we don't want to add new legacy mux platform init code
callbacks any longer as we are moving to DT based booting
anyways.
Broken hardware, missing the swakueup line, should
The am335x can't detect pending cirq in PM runtime suspend.
This patch reconfigures dat1 as a GPIO before going to suspend.
SDIO interrupts are detected with the GPIO, the GPIO will only wake
the module from suspend, SDIO irq detection will still happen through the
IP block.
Idea of remuxing the
Add SDIO IRQ entries to debugfs entry. Note that PSTATE shows current
state of data lines, incl. SDIO IRQ pending
Signed-off-by: Andreas Fenkart afenk...@gmail.com
---
drivers/mmc/host/omap_hsmmc.c | 19 ++-
1 file changed, 18 insertions(+), 1 deletion(-)
diff --git
On Mon, Nov 11, 2013 at 01:42:47PM -0600, Felipe Balbi wrote:
+ if (of_property_read_bool(node, clock-xtal))
+ flags |= CLK_IS_TYPE_XTAL;
+
Introducing a new compatible instead of a property would make more
sense here I think.
Do you have a reason not to do so?
As
Hi Luca,
On Mon, Nov 11, 2013 at 09:50:56PM +0200, Luca Coelho wrote:
On Mon, 2013-11-11 at 13:42 -0600, Felipe Balbi wrote:
+ if (of_property_read_bool(node, clock-xtal))
+ flags |= CLK_IS_TYPE_XTAL;
+
Introducing a new compatible instead of a property
Hi Tony,
On Mon, Nov 11, 2013 at 5:49 PM, Tony Lindgren t...@atomide.com wrote:
* Marek Belisko ma...@goldelico.com [131014 14:11]:
devconf1 reg access is localized only in mach-omap2 and we need to export
updating of devconf1 from omapdss venc driver (bypass and acbias bits).
Add simple api
Hi Tony,
On Mon, Nov 11, 2013 at 5:49 PM, Tony Lindgren t...@atomide.com wrote:
* Marek Belisko ma...@goldelico.com [131014 14:11]:
devconf1 reg access is localized only in mach-omap2 and we need to export
updating of devconf1 from omapdss venc driver (bypass and acbias bits).
Add simple api
* Belisko Marek marek.beli...@gmail.com [13 14:01]:
Hi Tony,
On Mon, Nov 11, 2013 at 5:49 PM, Tony Lindgren t...@atomide.com wrote:
* Marek Belisko ma...@goldelico.com [131014 14:11]:
devconf1 reg access is localized only in mach-omap2 and we need to export
updating of devconf1 from
* Belisko Marek marek.beli...@gmail.com [13 14:21]:
AFAIK it's not pinmux it's register where we update bits. Or am I
missing something?
Most of the omap control module registers seem to affect either
external pin configuration or internal signal muxes. So a big
chunk of them can already be
Hi Thomas and everyone,
I'm currently trying to refactor our dmtimer code in various ways and there are
different challenges in doing so, some goals are shorterm and others long term,
but I need some guidance so that I can do things the right way to begin with.
I wanted to start a discussion on
On Thu, Oct 31, 2013 at 04:31:23PM -0500, Joel Fernandes wrote:
Using the PaRAM configuration function that we split for reuse by the
different DMA types, we implement Cyclic DMA support.
For the cyclic case, we pass different configuration parameters to this
function, and handle all the
On Tuesday 05 November 2013 06:44 PM, Sricharan R wrote:
Enable the crossbar IP support for DRA7xx soc.
Cc: Santosh Shilimkar santosh.shilim...@ti.com
Cc: Rajendra Nayak rna...@ti.com
Cc: Tony Lindgren t...@atomide.com
Signed-off-by: Sricharan R r.sricha...@ti.com
---
Hi Rajendra,
On Tuesday 12 November 2013 11:11 AM, Rajendra Nayak wrote:
On Tuesday 05 November 2013 06:44 PM, Sricharan R wrote:
Enable the crossbar IP support for DRA7xx soc.
Cc: Santosh Shilimkar santosh.shilim...@ti.com
Cc: Rajendra Nayak rna...@ti.com
Cc: Tony Lindgren t...@atomide.com
50 matches
Mail list logo