Hi Archit,
On 10/05/2012 11:46 AM, Archit Taneja wrote:
Hi,
On Friday 31 August 2012 01:58 PM, Archit Taneja wrote:
On Friday 31 August 2012 01:57 PM, Tomi Valkeinen wrote:
On Fri, 2012-08-31 at 13:50 +0530, Archit Taneja wrote:
On Friday 31 August 2012 12:45 PM, Tomi Valkeinen wrote:
On
On 10/05/2012 03:20 PM, Archit Taneja wrote:
On Friday 05 October 2012 06:07 PM, Rajendra Nayak wrote:
On Friday 05 October 2012 05:59 PM, Archit Taneja wrote:
The other not so good option to make DSS PM work would be to add
OCPIF_SWSUP_IDLE flag to our l3_main_2__dss_* slave interfaces(which
Hi Lokesh,
On 10/10/2012 02:05 PM, Lokesh Vutla wrote:
Renaming elpida_ecb240abacn.dtsi file generic, so that the
same file can be reused for other parts from different vendors.
Could you elaborate a little bit?
Are these settings purely reflecting lpddr2 spec timings?
Regards,
Benoit
On 10/10/2012 02:05 PM, Lokesh Vutla wrote:
Device tree data for the EMIF sdram controllers in OMAP5
and LPDDR2 memory devices attached to OMAP5 boards.
Nit: Could you make a sentence with a verb to explain what you are doing
in this patch.
Signed-off-by: Lokesh Vutla lokeshvu...@ti.com
---
On 10/10/2012 02:05 PM, Lokesh Vutla wrote:
Memory present for omap5 is 2GB. But in dt file
omap5 - OMAP5
dt - dts
And this patch is about omap5-evm so you should be more specific in your
changelog and even in the subject:
ARM: dts: omap5-evm: Fix size of memory defined for EVM
it is
You should CC devicetree-disc...@lists.ozlabs.org for any Device tree
patches. This is applicable for the whole series.
On 10/10/2012 02:05 PM, Lokesh Vutla wrote:
Patch 1:
Renaming elpida_ecb240abacn.dtsi as lpddr2_data.dtsi
Patch 2:
Correcting size of memory defined for omap5
Hi Lokesh,
On 10/11/2012 08:16 AM, Lokesh Vutla wrote:
+ devicetree-discuss
Hi Benoit,
On Wednesday 10 October 2012 08:31 PM, Benoit Cousson wrote:
On 10/10/2012 02:05 PM, Lokesh Vutla wrote:
Device tree data for the EMIF sdram controllers in OMAP5
and LPDDR2 memory devices attached
On 10/11/2012 08:16 AM, Lokesh Vutla wrote:
+ devicetree-discuss
Hi Benoit,
On Wednesday 10 October 2012 08:18 PM, Benoit Cousson wrote:
Hi Lokesh,
On 10/10/2012 02:05 PM, Lokesh Vutla wrote:
Renaming elpida_ecb240abacn.dtsi file generic, so that the
same file can be reused for other
Hi Ricardo,
On 10/09/2012 04:15 PM, Ricardo Neri wrote:
Hi Benoit,
Have you had a chance to look at this patch? Maybe you want me to submit
it differently or to a different list?
Sorry, I missed it. It looks fine and aligned with what I have done for
OMAP5. I just have few minors comments.
Hi Tony,
On 10/12/2012 06:24 PM, Tony Lindgren wrote:
* Russell King - ARM Linux li...@arm.linux.org.uk [121012 08:56]:
For those who don't bother looking at my kautobuild boot tests on the OMAP
boards I have, here's the errors which get spat out at boot time. Note
that some of these I've
to be
specified in hwmod entry, add it for OMAP4.
Well, in this case, this is not the preferred way. The hwmod data are supposed
to reflect the real HW capabilities.
We'd better add the alias in the already existing dummy clock node.
Here is the patch to do that.
Thanks,
Benoit
---
From: Benoit Cousson b
.
The granularity is never used, but at least one global information
for all the memory banks is useful.
Signed-off-by: Benoit Cousson b-cous...@ti.com
Cc: Tero Kristo t-kri...@ti.com
---
arch/arm/mach-omap2/omap_hwmod_44xx_data.c |6 ++
1 files changed, 2 insertions(+), 4 deletions(-)
diff --git
Hi Tony,
On 10/16/2012 08:12 PM, Tony Lindgren wrote:
* Mohammed, Afzal af...@ti.com [121014 23:00]:
Hi,
On Fri, Oct 12, 2012 at 21:54:52, Tony Lindgren wrote:
* Russell King - ARM Linux li...@arm.linux.org.uk [121012 08:56]:
omap-gpmc omap-gpmc: error: clk_get
omap-gpmc: probe of
Hi Anil,
On 10/18/2012 07:46 AM, AnilKumar, Chimata wrote:
On Fri, Sep 21, 2012 at 21:19:11, AnilKumar, Chimata wrote:
Add tsl2550 ambient light sensor DT data to am335x-evm.dts. In AM335x
EVM tsl2550 ambient light sensor is connected to I2C2 bus. So this patch
adds child node inside i2c2
-by: Benoit Cousson b-cous...@ti.com
Regards,
Benoit
---
Hi Tony, Benoit,
Can you please take this patch for 3.7 since if we boot with DT audio will not
work on BeagleBoard and on boards which uses McBSP2 or 3 for audio.
Thank you,
Peter
arch/arm/boot/dts/omap3.dtsi | 4 ++--
1
vadi...@ti.com
Signed-off-by: Benoit Cousson b-cous...@ti.com
---
Hi Tony,
Here is a fix that Miguel sent me some time back and that I forgot until
I face the crash again while trying to enable the ISS for test.
Regards,
Benoit
arch/arm/mach-omap2/clockdomains44xx_data.c |2 +-
1 files
Hi Jon,
This looks good to me, I just have a minor nit comment.
On 10/17/2012 08:33 PM, Jon Hunter wrote:
Adds the counter-32k timers nodes present in OMAP2/3/4 devices and
device-tree binding documentation for OMAP counter-32k.
Signed-off-by: Jon Hunter jon-hun...@ti.com
---
Hi Avinash,
This look good to me except the: status = disabled.
The disabled should be reserved for variant that does not contain the IP.
Is it the case here?
Regards,
Benoit
On 09/18/2012 07:30 AM, Philip, Avinash wrote:
Add McSPI data node to AM33XX device tree file. The McSPI module (and
Hi Matt,
On 10/19/2012 01:30 PM, Matt Porter wrote:
On Fri, Oct 19, 2012 at 10:24:15AM +0200, Benoit Cousson wrote:
Hi Avinash,
This look good to me except the: status = disabled.
The disabled should be reserved for variant that does not contain the IP.
Is it the case here?
http
Hi Sourav,
On 10/22/2012 09:29 AM, Sourav Poddar wrote:
Currently, omap4 keypad mux settings are done in the board file.
Populate the mux settings in the dts file for the keypad to
work via dt.
Have you changed the driver to handle properly the dependency with the
pinctrl and thus return
On 10/22/2012 10:23 AM, Sourav wrote:
Hi Benoit,
On Monday 22 October 2012 01:15 PM, Benoit Cousson wrote:
Hi Sourav,
On 10/22/2012 09:29 AM, Sourav Poddar wrote:
Currently, omap4 keypad mux settings are done in the board file.
Populate the mux settings in the dts file for the keypad
Hi Sourav,
On 10/22/2012 01:16 PM, Sourav wrote:
Hi Sebastien,
On Monday 22 October 2012 03:52 PM, Sebastien Guiriec wrote:
Add base address and interrupt line inside Device Tree data for
Incomplete sentence!
Signed-off-by: Sebastien Guiriec s-guir...@ti.com
---
On 10/22/2012 01:57 PM, Benoit Cousson wrote:
Hi Sourav,
On 10/22/2012 01:16 PM, Sourav wrote:
Hi Sebastien,
On Monday 22 October 2012 03:52 PM, Sebastien Guiriec wrote:
Add base address and interrupt line inside Device Tree data for
Incomplete sentence!
Signed-off-by: Sebastien Guiriec s
Hi Paul,
What is CGRM? Is it a typo?
Regards,
Benoit
On 10/16/2012 03:32 AM, Paul Walmsley wrote:
This series removes the omap_prcm_get_reset_sources() function. This
was exported from arch/arm/mach-omap2/prcm.c for use by the OMAP
watchdog driver to report the boot reason. This series
Hi Felipe,
On 10/22/2012 11:46 AM, Felipe Balbi wrote:
on OMAP4+ we want to read IRQSTATUS_RAW register,
instead of IRQSTATUS. The reason being that IRQSTATUS
will only contain the bits which were enabled on
IRQENABLE_SET and that will break when we need to
poll for a certain bit which
On 10/22/2012 02:27 PM, Sourav wrote:
Hi Benoit,
On Monday 22 October 2012 05:37 PM, Benoit Cousson wrote:
On 10/22/2012 01:57 PM, Benoit Cousson wrote:
Hi Sourav,
On 10/22/2012 01:16 PM, Sourav wrote:
Hi Sebastien,
On Monday 22 October 2012 03:52 PM, Sebastien Guiriec wrote:
Add base
On 10/22/2012 02:28 PM, Felipe Balbi wrote:
Hi,
On Mon, Oct 22, 2012 at 02:27:20PM +0200, Benoit Cousson wrote:
Hi Felipe,
On 10/22/2012 11:46 AM, Felipe Balbi wrote:
on OMAP4+ we want to read IRQSTATUS_RAW register,
instead of IRQSTATUS. The reason being that IRQSTATUS
will only contain
Hi Seb,
Good work. Thanks for that series.
Just update it with all the acked-by you've got from the TI driver folks
+ the minor comment and I'll pull it in the for_3.8/dts branch.
That's a detail but you should update the subject with ARM: dts: OMAP5:
XXX prefix for consistency with the latest
On 10/22/2012 07:06 PM, Paul Walmsley wrote:
On Mon, 22 Oct 2012, Benoit Cousson wrote:
What is CGRM? Is it a typo?
That's the OMAP1 Clock Generation and Reset Module that contains the
ARM_SYSST register:
Outch, that's pretty old stuff. Thanks for the clarification.
Regards,
Benoit
Hi Dimitry,
On 10/22/2012 05:50 PM, Dmitry Torokhov wrote:
Hi Sourav,
On Mon, Oct 22, 2012 at 06:43:00PM +0530, Sourav Poddar wrote:
Adapt keypad to use pinctrl framework.
Tested on omap4430 sdp with 3.7-rc1 kernel.
I do not see anything in the driver that would directly use pinctrl. Is
Hi Linus,
On 10/23/2012 11:13 AM, Linus Walleij wrote:
On Mon, Oct 22, 2012 at 5:50 PM, Dmitry Torokhov
dmitry.torok...@gmail.com wrote:
Hi Sourav,
On Mon, Oct 22, 2012 at 06:43:00PM +0530, Sourav Poddar wrote:
Adapt keypad to use pinctrl framework.
Tested on omap4430 sdp with 3.7-rc1
On 10/23/2012 04:49 PM, Jon Hunter wrote:
Hi Seb,
On 10/23/2012 03:37 AM, Sebastien Guiriec wrote:
Add base address and interrupt line inside Device Tree data for
OMAP5
Signed-off-by: Sebastien Guiriec s-guir...@ti.com
---
arch/arm/boot/dts/omap5.dtsi | 16
1 file
On 10/23/2012 05:59 PM, Jon Hunter wrote:
On 10/23/2012 10:09 AM, Benoit Cousson wrote:
On 10/23/2012 04:49 PM, Jon Hunter wrote:
Hi Seb,
On 10/23/2012 03:37 AM, Sebastien Guiriec wrote:
Add base address and interrupt line inside Device Tree data for
OMAP5
Signed-off-by: Sebastien
On 10/23/2012 06:15 PM, Sebastien Guiriec wrote:
Hi Benoit and John,
On 10/23/2012 06:07 PM, Benoit Cousson wrote:
On 10/23/2012 05:59 PM, Jon Hunter wrote:
On 10/23/2012 10:09 AM, Benoit Cousson wrote:
On 10/23/2012 04:49 PM, Jon Hunter wrote:
Hi Seb,
On 10/23/2012 03:37 AM, Sebastien
Hi Seb,
Sorry, I missed your previous email, your v2 was the right one.
We do have a single INTC in every OMAP, there is no point to repeat the
same data hundred times.
The DTS are already big enough.
On 10/24/2012 09:07 AM, Sebastien Guiriec wrote:
Since kernel 3.7 the DTS data are not
The interrupt-parent attribute does not have to be added in each
node since the DT framework will check for the parent as well to get it.
Create an interrupt-parent for OMAP2, OMAP3, AM33xx and remove the
attributes from every nodes that were using it.
Signed-off-by: Benoit Cousson b-cous
On 10/24/2012 11:27 AM, Sebastien Guiriec wrote:
Hi Benoit,
On 10/24/2012 11:15 AM, Benoit Cousson wrote:
Hi Seb,
Sorry, I missed your previous email, your v2 was the right one.
We do have a single INTC in every OMAP, there is no point to repeat the
same data hundred times.
The DTS
Rename the files to have consistent names across OMAP boards.
Update the Makefile to use the new names.
Signed-off-by: Benoit Cousson b-cous...@ti.com
Cc: Uri Yosef ur...@variscite.com
---
arch/arm/boot/dts/Makefile |4 ++--
.../dts/{omap4-pandaES.dts = omap4-panda
.
Thanks to Vaibhav Hiremath for creating the AM33xx timer nodes. I have
modified
Vaibhav's original nodes adding information on which timers support a PWM
output.
Cc: Benoit Cousson b-cous...@ti.com
Signed-off-by: Jon Hunter jon-hun...@ti.com
I updated the patch to remove the interrupt
Hi Dmitry,
On 10/24/2012 06:14 PM, Dmitry Torokhov wrote:
On Wed, Oct 24, 2012 at 11:37:04AM +0300, Felipe Balbi wrote:
Hi,
On Tue, Oct 23, 2012 at 01:02:49PM -0700, Dmitry Torokhov wrote:
On Tue, Oct 23, 2012 at 11:18:12AM +0200, Benoit Cousson wrote:
Hi Dimitry,
On 10/22/2012 05:50 PM
adding information on which timers support a PWM
output.
Signed-off-by: Jon Hunter jon-hun...@ti.com
[b-cous...@ti.com: Remove the interrupt-parent from nodes]
Signed-off-by: Benoit Cousson b-cous...@ti.com
---
.../devicetree/bindings/arm/omap/timer.txt | 31 +++
arch/arm/boot
Hi Kishon,
On 10/15/2012 03:27 PM, Kishon Vijay Abraham I wrote:
Includes few minor fixes in dwc3-omap like populating the compatible
string in a correct way, extracting the utmi-mode property properly and
changing the index of get_irq since irq of core is removed from hwmod
entry.
Also
On 10/15/2012 03:27 PM, Kishon Vijay Abraham I wrote:
Used of_platform_populate() to populate dwc3 core platform_device
from device tree data. Since now the allocation of unique device id is
handled by of_*, removed the call to dwc3_get_device_id.
Just for my understanding: How are these
Hi Felipe,
On 10/26/2012 10:13 AM, Felipe Balbi wrote:
Hi,
On Thu, Oct 25, 2012 at 11:37:33AM +0530, Vivek Gautam wrote:
Hi,
On Tue, Oct 16, 2012 at 3:38 PM, Felipe Balbi ba...@ti.com wrote:
Hi,
On Tue, Oct 16, 2012 at 03:36:43PM +0530, kishon wrote:
Hi,
On Tuesday 16 October 2012
Hi Roger,
On 10/26/2012 05:16 PM, Roger Quadros wrote:
Hi Kishon Benoit,
On 09/24/2012 12:06 PM, Rabin Vincent wrote:
2012/9/24 ABRAHAM, KISHON VIJAY kis...@ti.com:
On Sat, Sep 22, 2012 at 3:03 AM, Rabin Vincent ra...@rab.in wrote:
USB doesn't work on pandaboard on linux-next, and
Hi Paul,
On 10/26/2012 07:54 PM, Paul Walmsley wrote:
On Fri, 26 Oct 2012, Benoit Cousson wrote:
On 10/26/2012 05:16 PM, Roger Quadros wrote:
I still can't get musb to work on 3.7-rc2. Apparently it is still
missing the patches from Benoit's for_3.7/dts_part2.
Maybe I just need to wait
On 10/26/2012 07:57 PM, Benoit Cousson wrote:
Hi Paul,
On 10/26/2012 07:54 PM, Paul Walmsley wrote:
On Fri, 26 Oct 2012, Benoit Cousson wrote:
On 10/26/2012 05:16 PM, Roger Quadros wrote:
I still can't get musb to work on 3.7-rc2. Apparently it is still
missing the patches from Benoit's
Hi Sourav,
On 10/29/2012 11:40 AM, Sourav Poddar wrote:
Add keypad data node in omap5-evm.
Based on I2C support patch for omap5, which has been
already posted as a different series.
Tested on omap5430 evm with 3.7-rc1 kernel.
Cc: Felipe Balbi ba...@ti.com
Cc: Santosh Shilimkar
Hi Avinash,
On 10/30/2012 10:41 AM, Philip, Avinash wrote:
On Mon, Oct 29, 2012 at 14:40:02, Philip, Avinash wrote:
On Thu, Oct 18, 2012 at 18:56:55, Porter, Matt wrote:
Adds AM33XX SPI support for am335x-bone and am335x-evm.
Matt,
Can you build SPI DT patch with DMA support on top of
On 10/31/2012 11:16 AM, Benoit Cousson wrote:
Hi Avinash,
On 10/30/2012 10:41 AM, Philip, Avinash wrote:
On Mon, Oct 29, 2012 at 14:40:02, Philip, Avinash wrote:
On Thu, Oct 18, 2012 at 18:56:55, Porter, Matt wrote:
Adds AM33XX SPI support for am335x-bone and am335x-evm.
Matt,
Can you
On 10/31/2012 11:51 AM, Philip, Avinash wrote:
Add McSPI data node to AM33XX device tree file. The McSPI module (and so
as the driver) is reused from OMAP4.
Signed-off-by: Philip, Avinash avinashphi...@ti.com
Tested-by: Matt Porter mpor...@ti.com
---
Applied in for_3.8/dts
Thanks,
Benoit
-by: Mugunthan V N mugunthan...@ti.com
Signed-off-by: Vaibhav Hiremath hvaib...@ti.com
Cc: Richard Cochran richardcoch...@gmail.com
Cc: Benoit Cousson b-cous...@ti.com
---
arch/arm/boot/dts/am335x-bone.dts |8 ++
arch/arm/boot/dts/am335x-evm.dts |8 ++
arch/arm/boot/dts
Hi Panto,
On 10/31/2012 07:09 PM, Tony Lindgren wrote:
* Pantelis Antoniou pa...@antoniou-consulting.com [121031 11:05]:
Hi Tony,
On Oct 31, 2012, at 7:52 PM, Tony Lindgren wrote:
* Pantelis Antoniou pa...@antoniou-consulting.com [121031 10:26]:
It is painless to move the adapter DT
SPI node
Add McSPI data node to AM33XX device tree file. The McSPI module (and so
as the driver) is reused from OMAP4.
Signed-off-by: Philip, Avinash avinashphi...@ti.com
Tested-by: Matt Porter mpor...@ti.com
[b-cous...@ti.com: Remove interrupt-parent]
Signed-off-by: Benoit Cousson b-cous...@ti.com
Hi Jon,
On 11/01/2012 04:49 PM, Jon Hunter wrote:
A few device tree timer updates for OMAP4/5 devices.
This series adds ...
1. MPU private addresses for OMAP4 timers
2. Timer nodes for OMAP5
3. 32kHz counter node for OMAP5
Great, thanks for that update. Just in time before the pull
data
ARM: dts: Add am335x-evmsk.dts
Documentation: dt: i2c: Update trivial-devices list
Benoit Cousson (2):
ARM: dts: OMAP: Move interrupt-parent to the root node to avoid
duplication
ARM: dts: OMAP: Rename pandaES and var_som for consistency
Jon Hunter (6):
ARM: dts
Hi Lokesh,
On 11/05/2012 06:58 AM, Lokesh Vutla wrote:
Hi,
On Thursday 11 October 2012 06:17 PM, Lokesh Vutla wrote:
This patch series adds Device tree data for the EMIF
sdram controllers in OMAP5 and LPDDR2 memory devices
in OMAP5-evm board.
Testing:
- Boot tested on OMAP5430 evm.
-
On 10/11/2012 02:47 PM, Lokesh Vutla wrote:
Adding EMIF device tree data for OMAP5 boards.
Signed-off-by: Lokesh Vutla lokeshvu...@ti.com
---
arch/arm/boot/dts/omap5.dtsi | 24
1 file changed, 24 insertions(+)
diff --git a/arch/arm/boot/dts/omap5.dtsi
On 10/11/2012 02:47 PM, Lokesh Vutla wrote:
Samsung's K3PE0E000B memory part is used in OMAP5-evm board.
Adding timings and geometry details for Samsung's memory part and
attaching the same to device-handle of EMIF1/2.
Signed-off-by: Lokesh Vutla lokeshvu...@ti.com
---
On 11/05/2012 11:51 AM, Benoit Cousson wrote:
Hi Lokesh,
On 11/05/2012 06:58 AM, Lokesh Vutla wrote:
Hi,
On Thursday 11 October 2012 06:17 PM, Lokesh Vutla wrote:
This patch series adds Device tree data for the EMIF
sdram controllers in OMAP5 and LPDDR2 memory devices
in OMAP5-evm board
+ Felipe
Hi Afzal,
On 11/05/2012 06:59 AM, Afzal Mohammed wrote:
From: Ajay Kumar Gupta ajay.gu...@ti.com
Device tree node for usbss on AM33XX. There are two musb
controllers on am33xx platform so have port0-mode and
port1-mode data.
[af...@ti.com: reg interrupt property addition]
Hi Kevin,
On 11/03/2012 09:31 AM, Kevin Hilman wrote:
On 10/30/2012 12:24 PM, Peter Ujfalusi wrote:
When booting with DT the OF core can fill up the resources provided
within
the DT blob.
The current way of handling the DT boot prevents us from removing
hwmod data
for platforms only
Hi Anil,
On 11/05/2012 02:46 PM, AnilKumar, Chimata wrote:
On Mon, Nov 05, 2012 at 16:15:40, AnilKumar, Chimata wrote:
Add device tree date for GPIO based various drivers matrix keypad,
volume keys, push buttons and use leds accross three AM33XX devices
viz EVM, BeagleBone and Starter Kit.
Hi Anil / Colin,
On 11/05/2012 10:42 AM, AnilKumar Ch wrote:
From: Colin Foe-Parker colin.foepar...@logicpd.com
Add system power off control to rtc driver which is the in-charge
of controlling the BeagleBone system power. The power_off routine
can be hooked up to pm_power_off system call.
+ Mark
On 11/05/2012 10:42 AM, AnilKumar Ch wrote:
From: Colin Foe-Parker colin.foepar...@logicpd.com
Set tps65217 PMIC status to OFF if power enable toggle is
supported. Also adds platform data flag, which should be
passed from board init data.
Signed-off-by: Colin Foe-Parker
Hi Tomi,
On 11/05/2012 02:14 PM, Tomi Valkeinen wrote:
From: Ricardo Neri ricardo.n...@ti.com
Add the pinmux configuration for HDMI and TPD12S015A. Configure the
gpios for the TPD12S015A and SDA, SCL and CEC for HDMI.
Signed-off-by: Ricardo Neri ricardo.n...@ti.com
Signed-off-by: Tomi
not yet
in linus/master.
The patches are available here:
git://git.kernel.org/pub/scm/linux/kernel/git/bcousson/linux-omap-dt.git
for_3.5/dts/all
Regards,
Benoit
Benoit Cousson (3):
arm/dts: twl4030: Add twl4030-gpio node
arm/dts: omap4-sdp: Add LEDs support
arm/dts: omap4-panda: Add LEDs
Add the debug LEDs nodes for an OMAP4 SDP/Blaze.
Signed-off-by: Benoit Cousson b-cous...@ti.com
---
arch/arm/boot/dts/omap4-sdp.dts | 43 +++
1 files changed, 43 insertions(+), 0 deletions(-)
diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts
Add the twl-gpio node inside twl4030 definition.
Cc: Felipe Balbi ba...@ti.com
Signed-off-by: Benoit Cousson b-cous...@ti.com
---
arch/arm/boot/dts/twl4030.dtsi |8
1 files changed, 8 insertions(+), 0 deletions(-)
diff --git a/arch/arm/boot/dts/twl4030.dtsi b/arch/arm/boot/dts
Add the debug LEDs nodes for an OMAP4 PandaBoard.
Signed-off-by: Benoit Cousson b-cous...@ti.com
---
arch/arm/boot/dts/omap4-panda.dts | 15 +++
1 files changed, 15 insertions(+), 0 deletions(-)
diff --git a/arch/arm/boot/dts/omap4-panda.dts
b/arch/arm/boot/dts/omap4-panda.dts
of these fake clkdm.
I'd like to get your feedback first on this one to go further for OMAP2 3.
This series is based on 3.5-rc2 and should target -rc3.
Regards,
Benoit
Benoit Cousson (2):
ARM: OMAP2+: hwmod data: Fix the wrong clkdm assigned to PRCM modules
Revert ARM: OMAP2+: clockdomains
by the cm_core_aon. It uses the
l4_cfg interconnect and not the l4_wkup.
Re-order the entries by address value.
Signed-off-by: Benoit Cousson b-cous...@ti.com
---
arch/arm/mach-omap2/omap_hwmod_44xx_data.c | 52 ++--
1 files changed, 26 insertions(+), 26 deletions(-)
diff
that these clock domains are probably non existant
on OMAP 2 3 and thus should be removed in all the
clockdomain files.
Signed-off-by: Benoit Cousson b-cous...@ti.com
---
arch/arm/mach-omap2/Makefile |1 -
arch/arm/mach-omap2/clockdomain44xx.c|6 -
arch/arm/mach
Hi Vaibhav,
One small comment.
On 06/28/2012 04:59 PM, Vaibhav Hiremath wrote:
The function __omap2_set_globals() can be common across all
platforms/architectures, even in case of omap4, internally it
calls same set of functions as in __omap2_set_globals() function
(except for sdrc).
This
On 06/28/2012 05:39 PM, Hiremath, Vaibhav wrote:
On Thu, Jun 28, 2012 at 20:35:38, Cousson, Benoit wrote:
Hi Vaibhav,
One small comment.
On 06/28/2012 04:59 PM, Vaibhav Hiremath wrote:
The function __omap2_set_globals() can be common across all
platforms/architectures, even in case of omap4,
On 06/29/2012 10:35 PM, Paul Walmsley wrote:
+ Benoît who is the maintainer of this file
+ the linux-arm-kernel mailing list, which should be cc'ed on all OMAP
patches
On Fri, 29 Jun 2012, Ruslan Bilovol wrote:
From: Wenbiao Wang ww...@ti.com
OTG clock usb_otg_hs_ick used a incorrect parent
Hi Paul Rajendra,
Here are a couple of fixes on PRCM header files and powerdomain data.
The series is based on v3.0-rc4 and tested on OMAP4430 ES2.1 + SDP.
The patches are available here:
git://gitorious.org/omap-pm/linux.git for_3.0.1/1_prcm_files_fixes
Regards,
Benoit
Benoit Cousson (3
blank line in cm2_44xx.h to align the output with
the other (cm1_44xx.h, prm44xx.h) files.
Replace one tab with space.
Update header copyright date.
Signed-off-by: Benoit Cousson b-cous...@ti.com
Cc: Paul Walmsley p...@pwsan.com
Cc: Rajendra Nayak rna...@ti.com
---
arch/arm/mach-omap2/cm1_44xx.h
ones.
Signed-off-by: Benoit Cousson b-cous...@ti.com
Cc: Paul Walmsley p...@pwsan.com
---
arch/arm/mach-omap2/prm44xx.h | 12
1 files changed, 0 insertions(+), 12 deletions(-)
diff --git a/arch/arm/mach-omap2/prm44xx.h b/arch/arm/mach-omap2/prm44xx.h
index 2aec8c8..6e53120 100644
was missing.
Add the PWRDM_HAS_LOWPOWERSTATECHANGE in flags field.
Indent all previous flags to be aligned with other fields.
Update the TI copyright date to 2011.
Signed-off-by: Benoit Cousson b-cous...@ti.com
Cc: Paul Walmsley p...@pwsan.com
Cc: Rajendra Nayak rna...@ti.com
Cc: Santosh Shilimkar
clock framework + DT).
Moreover, the diffstat is negative:-)
The series is based on for_3.0.1/1_prcm_files_fixes and tested
on OMAP4430 ES2.1 + SDP.
The patches are available here:
git://gitorious.org/omap-pm/linux.git for_3.0.1/2_prcm_files_cleanup
Regards,
Benoit
Benoit Cousson (12):
OMAP4
MPUSS was renamed MPU and L3_D2D D2D.
The rename will slightly change the order of the structure
and thus generate some structures moves.
Add a comment and remove a comma.
Update Copyright for TI and Nokia and add back Paul
in the author list.
Signed-off-by: Benoit Cousson b-cous...@ti.com
Cc
The USB DPLL is a J-Type DPLL with the sddiv extra parameter.
On the other hand, the UNIPRO is not a J-Type and thus does
not require this flag.
Add it in USB DPLL and remove it in UNIPRO DPLL.
Signed-off-by: Benoit Cousson b-cous...@ti.com
Cc: Paul Walmsley p...@pwsan.com
---
arch/arm/mach
A couple of fields were edited manually and thus do not stick
to the template used by the generator and by other structures.
Move them to the correct location.
Fix the wrong .ops for the dpll_unipro_x2_ck node.
Signed-off-by: Benoit Cousson b-cous...@ti.com
Cc: Paul Walmsley p...@pwsan.com
to avoid
unneeded indirection and provide a better readability.
Remove the defines that become useless.
Signed-off-by: Benoit Cousson b-cous...@ti.com
Cc: Paul Walmsley p...@pwsan.com
Cc: Rajendra Nayak rna...@ti.com
---
arch/arm/mach-omap2/clock44xx.h |7 ---
arch/arm/mach-omap2
.
Signed-off-by: Rajendra Nayak rna...@ti.com
Signed-off-by: Benoit Cousson b-cous...@ti.com
Cc: Paul Walmsley p...@pwsan.com
---
arch/arm/mach-omap2/clock44xx_data.c | 651 -
arch/arm/plat-omap/include/plat/clkdev_omap.h |2 +
arch/arm/plat-omap/include/plat
.
Signed-off-by: Jon Hunter jon-hun...@ti.com
[b-cous...@ti.com: Update the patch according to autogen output]
Signed-off-by: Benoit Cousson b-cous...@ti.com
---
arch/arm/mach-omap2/clock44xx_data.c | 86 ++-
arch/arm/mach-omap2/cm-regbits-44xx.h | 49
for parent selection are named auxclk*_src_ck
and the ones for divider selection as auxclk*_ck.
Signed-off-by: Rajendra Nayak rna...@ti.com
[b-cous...@ti.com: Rebase on top of clock cleanup
and autogen alignement]
Signed-off-by: Benoit Cousson b-cous...@ti.com
Cc: Paul Walmsley p...@pwsan.com
From: Jon Hunter jon-hun...@ti.com
UNIPRO was removed from OMAP4 devices from ES2.0 onwards.
Since this IP was anyway non-functional and not supported,
it is best to remove it completely.
Signed-off-by: Jon Hunter jon-hun...@ti.com
[b-cous...@ti.com: Update the changelog]
Signed-off-by: Benoit
Change the position of the ocp_if structure to match the template.
Remove unneeded comma at the end of address space flag field.
Remove USER_SDMA since this ocp link is only from the l3_main_1
path that is accessible only from the MPU in that case and not
the SDMA.
Signed-off-by: Benoit Cousson
Fix a typo in the mailbox description comment.
Fix .prcm alignement and usb_otg_hs class and hwmod structures.
Add a couple of more potential hwmods in the comment.
Remove hsi, since it is already included in the data.
Remove one blank line.
Signed-off-by: Benoit Cousson b-cous...@ti.com
Cc
A couple of parens were added around some flags.
Remove them, since they are not needed and not used
for any other hwmods.
Signed-off-by: Benoit Cousson b-cous...@ti.com
Cc: Paul Walmsley p...@pwsan.com
---
arch/arm/mach-omap2/omap_hwmod_44xx_data.c |4 ++--
1 files changed, 2 insertions
In order to make hwmod data usable for all OMAP4430 variants,
rename chip macro CHIP_IS_OMAP44XX.
Create the macro as well in cpu.h
Signed-off-by: Benoit Cousson b-cous...@ti.com
Cc: Paul Walmsley p...@pwsan.com
---
arch/arm/mach-omap2/omap_hwmod_44xx_data.c | 164
references to these modules.
Update TI copyright.
Signed-off-by: Benoit Cousson b-cous...@ti.com
Cc: Jon Hunter jon-hun...@ti.com
Cc: Paul Walmsley p...@pwsan.com
---
arch/arm/mach-omap2/cm-regbits-44xx.h | 115 ++--
arch/arm/mach-omap2/cm2_44xx.h | 32
usb_host_fs_fck does have a clkdev mapping with usbhs-omap.0
and fs_fck alias used by the driver.
The entry with NULL dev is thus not needed anymore.
Signed-off-by: Benoit Cousson b-cous...@ti.com
Cc: Paul Walmsley p...@pwsan.com
Cc: Felipe Balbi ba...@ti.com
---
arch/arm/mach-omap2
Some macros were not well aligned. Re-align them.
Signed-off-by: Benoit Cousson b-cous...@ti.com
Cc: Paul Walmsley p...@pwsan.com
Cc: Rajendra Nayak rna...@ti.com
---
arch/arm/mach-omap2/prcm_mpu44xx.h | 69 +--
1 files changed, 34 insertions(+), 35 deletions
/3_hwmod_fixes
Regards,
Benoit
Benoit Cousson (5):
OMAP2+: hwmod: Fix smart-standby + wakeup support
OMAP4: hwmod data: Add MSTANDBY_SMART_WKUP flag
OMAP2+: hwmod: Do not write the enawakeup bit if SYSC_HAS_ENAWAKEUP is not set
OMAP2+: hwmod: Remove _populate_mpu_rt_base warning
OMAP2
MSTANDBY_SMART_WKUP flag to mark the IPs that support this
capability.
Enable this new mode when applicable in _enable_wakeup, _disable_wakeup,
_enable_sysc and _idle_sysc.
The omap_hwmod_44xx_data.c will have to be updated to add this new flag.
Signed-off-by: Benoit Cousson b-cous...@ti.com
Signed-off
The Type 2 type of IPs will not have any enawakeup bit in their sysconfig.
Writing to that bit will instead trigger a softreset.
Check the flag to write this bit only if the module supports it.
Reported-by: Miguel Vadillo vadi...@ti.com
Signed-off-by: Benoit Cousson b-cous...@ti.com
Cc: Paul
It is perfectly valid for some hwmod to not have any
register target address for sysconfig. This is especially
true for interconnect hwmods.
Remove the warning.
Signed-off-by: Benoit Cousson b-cous...@ti.com
Cc: Paul Walmsley p...@pwsan.com
---
arch/arm/mach-omap2/omap_hwmod.c |3 ---
1
401 - 500 of 950 matches
Mail list logo
