Hi,
randomly hit this issue from 4.4-rc1:
[ 35.926605] INFO: rcu_sched detected stalls on CPUs/tasks:
[ 35.932373] (detected by 0, t=2602 jiffies, g=519, c=518, q=38)
[ 35.938659] All QSes seen, last rcu_sched kthread activity 2602
(-26407--29009), jiffies_till_next_fqs=1, root ->qsmask 0x
On Fri, Nov 6, 2015 at 5:13 PM, Sebastian Reichel wrote:
> This reverts commit af19161aaed7ff8d1a52b2e517460f2fa0774e32,
> which breaks the omap3 device tree build due to a wrong reference.
>
> I accidently queued this change via the power supply subsystem while
> telling Marek at the same time, t
Hi,
On Fri, Nov 6, 2015 at 3:24 PM, Felipe Balbi wrote:
>
> Hi again,
>
> Felipe Balbi writes:
>> Hi Marek,
>>
>> your commit af19161aaed7 ("ARM: dts: twl4030: Add iio properties for bci
>> subnode") breaks build on current linus/master (which current sits in
>
> this commit cannot be found in n
Hi,
On Thu, Oct 15, 2015 at 11:11 AM, Sebastian Reichel wrote:
> This driver fails to link without CONFIG_IIO, since
> there are no stubs for the iio_channels functions.
>
> Signed-off-by: Sebastian Reichel
> ---
> drivers/power/Kconfig | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
Hi,
On Tue, Oct 13, 2015 at 1:53 AM, Sebastian Reichel wrote:
> Hi,
>
> On Mon, Oct 12, 2015 at 03:20:10PM -0700, Tony Lindgren wrote:
>> * Tony Lindgren [151012 14:43]:
>> > * Belisko Marek [150926 13:02]:
>> > > Tony sorry I forgot to add you to the reci
On Tue, Oct 6, 2015 at 5:07 PM, Felipe Balbi wrote:
> Belisko Marek writes:
>
>> Hi,
>>
>> On Tue, Oct 6, 2015 at 4:03 PM, Belisko Marek
>> wrote:
>>> Hi Felipe,
>>>
>>> On Tue, Oct 6, 2015 at 4:00 PM, Felipe Balbi wrote:
>
Hi,
On Tue, Oct 6, 2015 at 4:03 PM, Belisko Marek wrote:
> Hi Felipe,
>
> On Tue, Oct 6, 2015 at 4:00 PM, Felipe Balbi wrote:
>>
>> Hi,
>>
>> Belisko Marek writes:
>>> Hi Tony,
>>>
>>> I'm using custom am33xx board where mpu
Hi Felipe,
On Tue, Oct 6, 2015 at 4:00 PM, Felipe Balbi wrote:
>
> Hi,
>
> Belisko Marek writes:
>> Hi Tony,
>>
>> I'm using custom am33xx board where mpu voltage can be changed through
>> gpio regulator on 4.1 (latest stable) kernel. I defined gpio-re
Hi Tony,
I'm using custom am33xx board where mpu voltage can be changed through
gpio regulator on 4.1 (latest stable) kernel. I defined gpio-regulator
node and also operating-points to DT. Gpio regulator seems to be
working fine but during probing cpufreq-dt I get error:
failed to init cpufreq tab
Tony sorry I forgot to add you to the recipients for this patchset.
Can you please queue this patch. Many thanks.
@Sebastian: thanks for noticing
On Sat, Sep 26, 2015 at 7:29 PM, Sebastian Reichel wrote:
> Hi Marek,
>
> On Fri, Sep 25, 2015 at 10:20:47PM +0200, Marek Belisko wrote:
>> Added new
Adding also twl6030-gpadc driver authors to loop
On Mon, Jul 20, 2015 at 8:57 AM, Belisko Marek wrote:
> Hi all,
>
> I'm trying to figure out what is relation between palmas mfd driver
> and twl-core for twl603x devices.
> twl-core driver seems to be older than palmas d
Hi all,
I'm trying to figure out what is relation between palmas mfd driver
and twl-core for twl603x devices.
twl-core driver seems to be older than palmas driver but seems both
export same functionality (except that palmas have defined structs for
gpadc but functionality is missing). My main focu
On Mon, Mar 16, 2015 at 10:05 PM, Pavel Machek wrote:
> On Wed 2015-02-04 23:14:32, Marek Belisko wrote:
>> Signed-off-by: Marek Belisko
>> ---
>> .../bindings/power_supply/twl4030_madc_battery.txt | 43
>> ++
>> 1 file changed, 43 insertions(+)
>> create mode 100644
>> Do
Hi Tony,
On Mon, Mar 16, 2015 at 9:35 PM, Tony Lindgren wrote:
> * Sebastian Reichel [150304 16:41]:
>> Hi,
>>
>> On Wed, Feb 04, 2015 at 11:14:33PM +0100, Marek Belisko wrote:
>> > Signed-off-by: Marek Belisko
>> > ---
>> > arch/arm/boot/dts/omap3-gta04.dtsi | 30 +
On Fri, Mar 13, 2015 at 12:48 PM, Peter Ujfalusi wrote:
> On 03/13/2015 01:05 PM, Arnd Bergmann wrote:
>> On Thursday 12 March 2015 22:14:59 Marek Belisko wrote:
>>> diff --git a/Documentation/devicetree/bindings/sound/omap-twl4030.txt
>>> b/Documentation/devicetree/bindings/sound/omap-twl4030.tx
Hi,
On Thu, Mar 12, 2015 at 10:19 AM, Peter Ujfalusi wrote:
> On 03/12/2015 12:12 AM, Belisko Marek wrote:
>> Hi,
>>
>> I'm looking at sources for omap-twl4030.c driver which is used by many
>> boards. In DT bindings documentation is property ti,codec describe
Hi,
I'm looking at sources for omap-twl4030.c driver which is used by many
boards. In DT bindings documentation is property ti,codec described as
mandatory but it's never parsed in driver code. I did small experiment
in gta04 board and remove ti,codec from devicetree and sound was
working. I think
Tony,
should I send v3 (with updates) or can you apply current version? Thanks.
On Thu, Feb 19, 2015 at 11:55 PM, Grazvydas Ignotas wrote:
> On Tue, Feb 17, 2015 at 9:52 PM, Marek Belisko wrote:
>> changes from v1:
>> - add new boards to makefile in patch 2,3 (don't add them
>> in separate comm
Ping.
On Wed, Feb 4, 2015 at 11:14 PM, Marek Belisko wrote:
> This patches adding support for twl4030_madc_battery to use twl4030_madc iio
> framework + DT support.
> Patches was tested on gta04 board. twl4030_madc_battery driver is converted in
> first patch to iio consumer and in next patches
Ping for input maintainer. DT changes was acked. Thanks.
On Tue, Sep 30, 2014 at 10:17 PM, Marek Belisko wrote:
> This patch adds new parameters that allow to address typical hardware
> design differences: touch screens may be wired or oriented differently
> (portrait or landscape). And usually t
Tomi can you please pick up this series for 3.20 release? Thanks
On Wed, Dec 3, 2014 at 10:33 PM, Marek Belisko wrote:
> changes from v3:
> - use GPL v2 instead GPL
> - fix wrong gpios property name in doc and DT
> - set gpio to NULL if invalid
> - drop unnecessary header
>
> changes from v2:
> -
Neil Brown send series which implement what was suggested in previous posts:
https://lkml.org/lkml/2014/12/11/454
On Wed, Dec 10, 2014 at 11:50 PM, s...@debian.org wrote:
> Hi,
>
> On Wed, Dec 10, 2014 at 09:56:22PM +0100, Pavel Machek wrote:
>> On Wed 2014-12-10 18:42:03, Mark Rutland wrote:
>>
Hi Tony,
On Tue, Nov 11, 2014 at 12:36 AM, Tony Lindgren wrote:
> * Marek Belisko [141103 14:01]:
>> gta04 board need for tvout enabled 2 bits in devconf1 register (tvbypass and
>> acbias).
>> Add single pinmux entry and enable it.
>>
>> Signed-off-by: Marek Belisko
>> ---
>> arch/arm/boot/dt
Hi Tomi,
On Wed, Nov 12, 2014 at 2:57 PM, Tomi Valkeinen wrote:
> Hi,
>
>
> On 03/11/14 23:59, Marek Belisko wrote:
>> opa362 is amplifier for videoand can be connected to the tvout pads
>> of the OMAP3. It has one gpio control for enable/disable of the output
>> (high impedance).
>>
>> Signed-of
Ping. Any objections? Thanks
On Tue, Sep 30, 2014 at 10:17 PM, Marek Belisko wrote:
> Following series add support to tsc2007 touchscreen driver for
> pre-calibration,
> flipping and rotation. Added bindings are documented and used in gta04 device
> tree.
>
> Marek Belisko (3):
> input: tsc20
On Mon, Jul 28, 2014 at 10:04 PM, Michael Trimarchi
wrote:
> Hi
>
> Il 28/lug/2014 22:02 "Belisko Marek" ha scritto:
>
>
>>
>> Hi Michael,
>>
>> On Mon, Jul 28, 2014 at 9:56 PM, Michael Trimarchi
>> wrote:
>> > Hi
Hi Michael,
On Mon, Jul 28, 2014 at 9:56 PM, Michael Trimarchi
wrote:
> Hi Marek
>
> Il 28/lug/2014 21:54 "Marek Belisko" ha scritto:
>
>
>>
>> Add model a5 which have additional jack detection.
>>
>> Signed-off-by: Marek Belisko
>> ---
>> arch/arm/boot/dts/Makefile | 1 +
>> arch/ar
Hi Russel,
On Fri, Jul 4, 2014 at 1:01 AM, Russell King - ARM Linux
wrote:
> On Thu, Jul 03, 2014 at 10:49:23PM +0200, Marek Belisko wrote:
>> From: NeilBrown
>>
>> If a 'gpio_reset' is specified, then hold it low while
>> turning the power regulator on.
>> This is needed for some wi2wi wireless
On Tue, Jul 22, 2014 at 9:46 PM, Peter Meerwald wrote:
>
>> gta04 is using hmc5843l not hmc5843 so fix wrong compatible
>> entry.
>
> I guess you mean hmc5883l
Ah right. Thanks. I'll post update version.
>
>> Signed-off-by: Marek Belisko
>> ---
>> arch/arm/boot/dts/omap3-gta04.dts | 2 +-
>> 1 f
On Tue, Jul 22, 2014 at 8:24 AM, Tony Lindgren wrote:
> * Marek Belisko [140721 14:08]:
>
> Can you please add the descriptions to all the patches?
OK thanks for review. I'll send v2.
> Other than that looks OK to me.
>
> Regards,
>
> Tony
BR,
marek
--
as simple and primitive as possible
Hi Tony,
On Fri, Feb 28, 2014 at 11:25 PM, Tony Lindgren wrote:
> * Marek Belisko [140125 13:31]:
>
> Hmm care to add descriptions and repost the remaining patches
> that I did not yet pick up for the fixes?
Sure I'll do.
>
>> Signed-off-by: NeilBrown
>
> Hmm should this also have From: NeilBro
On Thu, Feb 13, 2014 at 11:03 AM, Tomi Valkeinen wrote:
> Hi,
>
> I've been debugging OMAP3 related issues with DSS clocks, and I hopefully have
> them all fixed with this series. This fixes the problems for both non-DT boot,
> but also for DT boot with DSS DT support (which is not merged yet).
>
Hi Tomi,
On Wed, Feb 12, 2014 at 2:18 PM, Tomi Valkeinen wrote:
> Hi Tero, Christoph,
>
> On 07/02/14 12:12, Christoph Fritz wrote:
>> On Tue, 2014-02-04 at 17:50 +0200, Tero Kristo wrote:
>>> On 01/29/2014 01:21 PM, Christoph Fritz wrote:
> Currently I only analyzed sys_clkout2 (see attachme
Ping? Benoit can you please merge this trivial update. Thanks.
On Sat, Dec 21, 2013 at 4:12 PM, Marek Belisko wrote:
> BMP085 EOC (End Of Conversion) irq line is connected to
> gpio113 on gta04. Set irq properties to have driver using irq
> instead polling for EOC.
>
> Signed-off-by: Marek Belisk
c7 issue with unable to find phy
(phy was twl4030_usb). After that
issue is gone.
>
> Not sure what's causing those failures :-s
>
> -Kishon
>
>>
>> cheers,
>> -roger
>>
>> On 01/09/2014 02:31 AM, Belisko Marek wrote:
>>> Any pointers?
Any pointers? Still present in 3.13-rc7.
On Wed, Dec 4, 2013 at 1:22 PM, Roger Quadros wrote:
> +Kishon
>
> On 12/03/2013 11:33 PM, Belisko Marek wrote:
>> Hi,
>>
>> current 3.13-rcX break usb support on gta04 board (similar to
>> beagleboard) when booting via bo
On Fri, Dec 27, 2013 at 7:16 PM, Tony Lindgren wrote:
> * Belisko Marek [131221 15:58]:
>> OK seems I found solution:
>> http://marc.info/?l=linux-omap&m=138756097116464&w=2
>
> Good to hear :)
>
>> @Tony: Is this going to 3.13?
>
> Sorry too intr
OK seems I found solution:
http://marc.info/?l=linux-omap&m=138756097116464&w=2
@Tony: Is this going to 3.13?
On Sun, Dec 22, 2013 at 12:26 AM, Belisko Marek wrote:
> Hi,
>
> I'm trying to boot gta04 board with DT with latest 3.13-rc4 kernel.
> Most of the parts seems
Hi,
I'm trying to boot gta04 board with DT with latest 3.13-rc4 kernel.
Most of the parts seems to work except of mmc. I can see for mmc0 only
messages (vmmc1 and vsim regulators seems to be fine):
[1.969573] VMMC1: 1850 <--> 3150 mV at 3000 mV
[2.016784] VSIM: 1800 <--> 3000 mV at 1800 m
On Mon, Dec 9, 2013 at 6:50 PM, Tony Lindgren wrote:
> * Belisko Marek [131208 23:36]:
>> Hi Tony,
>>
>> On Thu, Dec 5, 2013 at 7:43 PM, Tony Lindgren wrote:
>> > * Belisko Marek [131203 01:21]:
>> >> On Tue, Dec 3, 2013 at 10:08 AM, Belisko Marek
&
Hi Tony,
On Tue, Dec 10, 2013 at 11:46 PM, Tony Lindgren wrote:
> * Belisko Marek [131210 14:13]:
>> On Tue, Nov 12, 2013 at 12:31 AM, Tony Lindgren wrote:
>> >
>> > It would be best to set it up as omap-ctrl.c driver under drivers
>> > somewhere with fe
Hi Tony,
On Tue, Nov 12, 2013 at 12:31 AM, Tony Lindgren wrote:
> * Belisko Marek [13 14:01]:
>> Hi Tony,
>>
>> On Mon, Nov 11, 2013 at 5:49 PM, Tony Lindgren wrote:
>> > * Marek Belisko [131014 14:11]:
>> >> devconf1 reg access is localize
Hi Tony,
On Thu, Dec 5, 2013 at 7:43 PM, Tony Lindgren wrote:
> * Belisko Marek [131203 01:21]:
>> On Tue, Dec 3, 2013 at 10:08 AM, Belisko Marek
>> wrote:
>> > Hi,
>> >
>> > On Tue, Dec 3, 2013 at 9:58 AM, Kishon Vijay Abraham I
>> > wrote
Hi,
current 3.13-rcX break usb support on gta04 board (similar to
beagleboard) when booting via board file.
In console we can see messages:
[ 5227.287841] twl4030_usb twl4030_usb: Timeout setting T2 HSUSB PHY DPLL clock
[ 5232.936096] omap_musb_mailbox: musb core is not yet ready
[ 5233.958160]
On Tue, Dec 3, 2013 at 10:08 AM, Belisko Marek wrote:
> Hi,
>
> On Tue, Dec 3, 2013 at 9:58 AM, Kishon Vijay Abraham I wrote:
>> Hi,
>>
>> On Tuesday 03 December 2013 02:03 PM, Marek Belisko wrote:
>>> Without this change when booting omap3 device (gta04) w
Hi,
On Tue, Dec 3, 2013 at 9:58 AM, Kishon Vijay Abraham I wrote:
> Hi,
>
> On Tuesday 03 December 2013 02:03 PM, Marek Belisko wrote:
>> Without this change when booting omap3 device (gta04) with board file
>> leads to follwing errors:
>>
>> [1.203308] musb-hdrc musb-hdrc.0.auto: unable to f
Hi Tony,
On Mon, Nov 11, 2013 at 5:49 PM, Tony Lindgren wrote:
> * Marek Belisko [131014 14:11]:
>> devconf1 reg access is localized only in mach-omap2 and we need to export
>> updating of devconf1 from omapdss venc driver (bypass and acbias bits).
>> Add simple api call which update only necess
Hi Tony,
On Mon, Nov 11, 2013 at 5:49 PM, Tony Lindgren wrote:
> * Marek Belisko [131014 14:11]:
>> devconf1 reg access is localized only in mach-omap2 and we need to export
>> updating of devconf1 from omapdss venc driver (bypass and acbias bits).
>> Add simple api call which update only necess
Hi,
ping.
On Mon, Oct 14, 2013 at 11:02 PM, Marek Belisko wrote:
> This patches is adding bypass and acbias functionality to omapdss venc driver.
> In first patch we export updatin bypass and acbias in devconf1 register. Next
> patch
> add handling for updating in venc driver and last patch add
Hi Tomi,
On Tue, Oct 29, 2013 at 12:07 PM, Tomi Valkeinen wrote:
> On 17/10/13 17:14, Marek Belisko wrote:
>> Signed-off-by: Marek Belisko
>> Signed-off-by: H. Nikolaus Schaller
>> ---
>>
>> changes from v1:
>> - reworked to be spi driver instead platform with custom spi bitbang
>> this confi
Hi,
On Fri, Oct 25, 2013 at 12:12 AM, Ezequiel Garcia
wrote:
> This simplifies the error path and makes the code less error-prone.
>
> Signed-off-by: Ezequiel Garcia
> ---
> drivers/mtd/nand/omap2.c | 6 +-
> 1 file changed, 1 insertion(+), 5 deletions(-)
>
> diff --git a/drivers/mtd/nand/o
Hi Tomi,
On Fri, Oct 11, 2013 at 10:17 AM, Tomi Valkeinen wrote:
> On 11/10/13 10:42, Dr. H. Nikolaus Schaller wrote:
>
>> I am not sure if there is a SPI driver for a McBSP port [1]? And to make that
>> work (reliably) and tested it might need a lot of work for us. At least I
>> think
>> such a
CC - Nikolaus Schaller
On Wed, Sep 25, 2013 at 8:12 AM, Tomi Valkeinen wrote:
> On 24/09/13 23:04, Belisko Marek wrote:
>> Hi,
>>
>> we're using connector-analog-tv driver to enable TV out on gta04
>> board. There is exception that we need to change some twl regi
Hi,
we're using connector-analog-tv driver to enable TV out on gta04
board. There is exception that we need to change some twl registers +
some gpio when enable/disable TV output. My question is if there is
some way how to do that or do we need to copy'n'paste code from
connector-analog-tv driver
Hi Tomi,
On Fri, Aug 30, 2013 at 9:57 AM, Tomi Valkeinen wrote:
> On 29/08/13 15:35, Marek Belisko wrote:
>> Signed-off-by: H. Nikolaus Schaller
>> Signed-off-by: Marek Belisko
>> ---
>> drivers/video/omap2/displays/panel-generic-dpi.c | 53
>>
>> 1 file changed, 53 i
Hi All,
On Sat, Aug 10, 2013 at 1:09 PM, Pavel Machek wrote:
> On Fri 2013-08-02 01:43:55, Pavel Machek wrote:
>> On Sun 2013-07-28 15:44:09, Pavel Machek wrote:
>> > On Mon 2013-07-15 01:28:19, Aaro Koskinen wrote:
>> > > Hi,
>> > >
>> > > On Sat, Jul 13, 2013 at 02:17:09PM +0200, Pavel Machek w
Ping. Any objections to that patch?
On Thu, Jan 24, 2013 at 7:34 PM, Marek Belisko
wrote:
> Signed-off-by: Marek Belisko
> ---
> arch/arm/boot/dts/omap3-gta04.dts | 94
> +
> 1 file changed, 94 insertions(+)
> create mode 100644 arch/arm/boot/dts/omap3-gt
Hi,
using barebox to boot 3.5 kernel with device tree for pandaboard (A2)
stuck after some seconds. Any ideas?
Log:
bootm -o /boot/omap4-panda.dtb /boot/uImage
Image Name: Linux-3.5.0-01676-g84de33d-dirty
OS: Linux
Architecture: ARM
Type: Kernel Image
Compressi
Hi,
I'm trying to run 3.2.1 stable kernel release on Pandaboard.
With enabled earlyprintk I got following:
[0.00] Booting Linux on physical CPU 0
[0.00] Linux version 3.2.0-03025-g2bf90aa
(open-nandra@nandra-host) (gcc version 4.5.1 (Sourcery G++ Lite
2010.09-50) ) #3 SMP Fri Jan
On Thu, Jan 26, 2012 at 11:13 AM, Andre Puschmann
wrote:
> On 01/25/2012 11:15 PM, Frank Agius wrote:
>> On 12/10/2011 8:55 AM, Andre Puschmann wrote:
>>> Hi list, Steve,
>>>
>>> I am trying to boot a kernel I built (using omap2plus_defconfig) based
>>> on Steve's omap-3.2 branch without much succ
Hi,
just want to ask if anybody try to boot 3.2.1 stable kernel on Pandaboard.
I try yesterday but last message which I seen was uncompressing linux
(also with enabled CONFIG_LL).
Use codesourcery 2009q1 + config from here:
http://elinux.org/images/7/71/Config.3.2.2
Thanks,
marek
--
as si
On Fri, Apr 8, 2011 at 9:00 AM, Thomas Weber
wrote:
> Am 25.03.2011 08:53, schrieb Belisko Marek:
>> On Fri, Mar 25, 2011 at 8:13 AM, Jarkko Nikula wrote:
>>> On Thu, 24 Mar 2011 12:00:30 -0700
>>> Tony Lindgren wrote:
>>>
>>>> * Belisko Marek [1
On Fri, Mar 25, 2011 at 9:27 AM, Jarkko Nikula wrote:
> On Fri, 25 Mar 2011 08:57:04 +0100
> Belisko Marek wrote:
>
>> >> > Can you enable DEBUG_LL and EARLY_PRINTK in your .config
>> >> > and add earlyprintk to your cmdline? Then you should see
>>
On Thu, Mar 24, 2011 at 8:00 PM, Tony Lindgren wrote:
> * Belisko Marek [110324 08:18]:
>> On Thu, Mar 24, 2011 at 4:18 PM, Tony Lindgren wrote:
>>
>> > * Belisko Marek [110324 02:50]:
>> > > Hi,
>> > >
>> > > Try to run 2.6.38 on my
On Fri, Mar 25, 2011 at 8:13 AM, Jarkko Nikula wrote:
> On Thu, 24 Mar 2011 12:00:30 -0700
> Tony Lindgren wrote:
>
>> * Belisko Marek [110324 08:18]:
>> > On Thu, Mar 24, 2011 at 4:18 PM, Tony Lindgren wrote:
>> >
>> > > * Belisko Marek [110324
Hi,
Try to run 2.6.38 on my sbc8100
(use mach-type for devkit8000 because boards are similar) board but
when u-boot load it to ram I see just:
## Booting kernel from Legacy Image at 8030 ...
Image Name: Linux-2.6.38-06570-g79c21b4
Image Type: ARM Linux Kernel Image (uncompressed)
Hi Toomi,
On Thu, Feb 24, 2011 at 11:39 AM, Tomi Valkeinen wrote:
> On Thu, 2011-02-24 at 04:05 -0600, Belisko Marek wrote:
>> Hello,
>>
>> would be possible to configure dss on omap3530 which is connected to
>> 18bit TFT display in such way:
>>
Hello,
would be possible to configure dss on omap3530 which is connected to
18bit TFT display in such way:
8 88
| | | | | | | |-| | | | | | | |-| | | | | | | |
6 6 6
| | | | | |-| | | | | |-| | | | | |
So no standard connection (2 bits in every col
Hi,
I'm trying to figure out why my display which have 18bpp doesn't show
properly colors.
As I can understand from DSS when I set 18bpp 24bpp is used just 2
data bit aren't connected
so everything should be fine. Anyway my tux looks little bit red ;).
Any ideas? I use old 2.6.29-rc3 kernel.
Than
Hi,
On Thu, Dec 16, 2010 at 4:30 PM, DebBarma, Tarun Kanti
wrote:
> Did anyone observe this? I am using omap_generic_1710_defconfig
>
> [...]
> input: omap-keypad as /devices/platform/omap-keypad/input/input0
> TCP cubic registered
> NET: Registered protocol family 17
> Registering the dns_resolv
On Fri, Nov 12, 2010 at 12:47 PM, Samreen wrote:
> A null pointer check added.
>
> Signed-off-by: Samreen
> ---
> drivers/video/omap2/omapfb/omapfb-main.c | 2 ++
> 1 files changed, 2 insertions(+), 0 deletions(-)
>
> diff --git a/drivers/video/omap2/omapfb/omapfb-main.c
> b/drivers/video/om
This patch introduces support for the HTC Herald (S310, etc.)
series of smart phones -- board support
and LCD panel settings.
Signed-off-by: Marek Belisko
---
arch/arm/mach-omap1/Kconfig |6 +
arch/arm/mach-omap1/Makefile |1 +
arch/arm/mach-omap1/board-htc
Hi,
I'm writing new omap dai (for EAC codec base omap's).
My code is based on existing omap-mcbsp.c code basically.
After loadingof module I got error which appear in init function when
call snd_soc_register_dai().
I browse for code but can't figure out where dai->dev should be set to
don't get
Hi,
I would like to rewrite old eac audio driver for omap730 to current
ASoc implementation
but as I can understand new implementation use McBsP to
transfer data to codec. Could this approach be used in omap850 which
use EAC like codec and data from memory is transfered via DMA?
Thanks in advance
Hi,
when make htcherald_defconfig on current linux-omap tree
(82f1d8f22f2c65e70206e40a6f17688bf64a892c) compilation fails
in drivers/video/omap/lcd_htcherald.c.
Following patch fixed this problem.
---
drivers/video/omap/lcd_htcherald.c |2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
Hi,
On Fri, Nov 27, 2009 at 1:25 PM, Janusz Krzysztofik
wrote:
> All of the LCD DMA code in plat-omap/dma.c appears to be OMAP1-only (and
> apparently only is available on a subset of OMAP1 chips).
>
> Move this code to mach-omap1/lcd_dma.c.
>
> Created against linux-omap for-next,
> commit 44217
On Fri, Nov 27, 2009 at 1:10 PM, Anuj Aggarwal wrote:
> This patch fixes two issues:
> a) Infinite loop in resume function
> b) Writes to non-existing registers in resume function
>
> Signed-off-by: Anuj Aggarwal
> ---
> sound/soc/codecs/tlv320aic23.c | 3 +--
> 1 files changed, 1 insertions(
Hi,
On Fri, Nov 27, 2009 at 8:01 AM, Paul Walmsley wrote:
> On Thu, 26 Nov 2009, Janusz Krzysztofik wrote:
>
>> Thursday 26 November 2009 03:08:30 Paul Walmsley napisał(a):
>> > On Wed, 25 Nov 2009, Janusz Krzysztofik wrote:
>> > > It turned out not that simple. Since arch/arm/mach-omap1/lcd_dma.
Hi,
I'm trying to figure out where are omap2420 eac codec code.
In 2.6.25 there was for N800 written in sound/arm/eac.c but in latest
tree there
is no such file. I'm trying to get some clue because I would like to write
similar for omap850.
Thanks,
Marek
--
To unsubscribe from this list: send th
Hi,
I'm trying to port Linux on HTC Oxygen (omap850). As start point I choose
previous port at:http://vivien.chappelier.free.fr/typhoon/index.html
I try to modify tft driver for my board but with no success. I'm still
missing some
variables in lcd_panel structure.
What important is still missin
80 matches
Mail list logo