Hi Nishanth,
On 21/10/2014 22:24, Nishanth Menon wrote:
DRA7(including AM5x) and AM47x series are handled under OMAP umbrella.
These SoC support and dts have been added since 3.14 kernel and Pull
requests for these have come in from OMAP till date.
So just ensure that get_maintainers can pick
Hi Tony,
On 23/04/2014 16:48, Tony Lindgren wrote:
* Benoit Cousson bcous...@baylibre.com [140422 07:14]:
Hi Leigh,
On 16/04/2014 13:26, Leigh Brown wrote:
In ARM: dts: am33xx: correcting dt node unit address for usb, the
usb_ctrl_mod and cppi41dma nodes were updated with the correct
Hi Ezequiel,
On 23/04/2014 17:17, Ezequiel Garcia wrote:
On Apr 23, Tony Lindgren wrote:
* Benoit Cousson bcous...@baylibre.com [140422 07:14]:
Hi Leigh,
On 16/04/2014 13:26, Leigh Brown wrote:
In ARM: dts: am33xx: correcting dt node unit address for usb, the
usb_ctrl_mod and cppi41dma
Hi Leigh,
On 16/04/2014 13:26, Leigh Brown wrote:
In ARM: dts: am33xx: correcting dt node unit address for usb, the
usb_ctrl_mod and cppi41dma nodes were updated with the correct register
addresses. However, the dts files that reference these nodes were not
updated, and those devices are no
it if either of you want.
Feel free to queue it, I don't have anything else pending so far, so I
was not planning to do a pull request.
Acked-by: Benoit Cousson bcous...@baylibre.com
Thanks,
Benoit
--
Benoît Cousson
BayLibre
Embedded Linux Technology Lab
www.baylibre.com
--
To unsubscribe from
On 02/03/2014 23:17, Tony Lindgren wrote:
* Benoit Cousson bcous...@baylibre.com [140302 12:45]:
Hi Tony,
Please pull the following commits for OMAP Device Tree for v3.15.
Thanks pulling into omap-for-v3.15/dt.
Thank you Tony.
Regards,
Benoit
--
Benoît Cousson
BayLibre
Embedded Linux
On 28/02/2014 23:17, Tony Lindgren wrote:
* Jack Mitchell m...@embed.me.uk [140122 03:09]:
From: Jack Mitchell j...@embed.me.uk
Devicetree include file for setting up the am335x mcasp bus, i2c-2
bus, and audio codec required for a functioning BeagleBone Audio Cape.
Signed-off-by: Jack
Hi Sourav,
On 21/02/2014 15:28, Sourav Poddar wrote:
Hi Benoit,
On Tuesday 14 January 2014 07:51 PM, Benoit Cousson wrote:
Hi Felipe,
On 14/01/2014 14:14, Felipe Balbi wrote:
On Mon, Jan 13, 2014 at 10:13:13PM +0530, sourav wrote:
Benoit,
On Thursday 19 December 2013 06:03 PM, Sourav
Hi Archit,
On 17/12/2013 11:02, Archit Taneja wrote:
Add Dynamic Memory Manager (DMM) bindings for OMAP4 and OMAP5 and DRA7x devices.
DMM only requires address and irq information.
Add documentation for the DMM bindings.
Originally worked on by Andy Gross andy...@gmail.com
Cc: Andy Gross
Hi Tony,
Please pull the following commits for OMAP Device Tree for v3.15.
Thanks,
Benoît
The following changes since commit 6d0abeca3242a88cab8232e4acd7e2bf088f3bc2:
Linux 3.14-rc3 (2014-02-16 13:30:25 -0800)
are available in the git repository at:
Hi Sebastian,
On 29/01/2014 16:03, Sebastian Reichel wrote:
Hi,
On Sat, Jan 11, 2014 at 10:16:57PM +0100, Sebastian Reichel wrote:
Here are a couple of additions for the Nokia N900 Device Tree
Source file. All related drivers changes are queued for 3.14
(except for the tpa6130a2, which got
Hi Nathan,
On 11/02/2014 21:14, Nathan Lynch wrote:
On 01/29/2014 10:56 AM, Nathan Lynch wrote:
Expose the PMU on OMAP5.
Signed-off-by: Nathan Lynch nathan_ly...@mentor.com
OMAP folks, any issues with this patch?
Yes :-)
Notes:
Briefly tested with perf on OMAP5 UEVM with
Hi Sebastian,
On 20/01/2014 16:59, Sebastian Reichel wrote:
On Sat, Jan 11, 2014 at 10:16:57PM +0100, Sebastian Reichel wrote:
Here are a couple of additions for the Nokia N900 Device Tree
Source file. All related drivers changes are queued for 3.14
(except for the tpa6130a2, which got merged
Hi Felipe,
On 14/01/2014 14:14, Felipe Balbi wrote:
On Mon, Jan 13, 2014 at 10:13:13PM +0530, sourav wrote:
Benoit,
On Thursday 19 December 2013 06:03 PM, Sourav Poddar wrote:
Add gpio keys node for am43x gp evm.
Signed-off-by: Sourav Poddarsourav.pod...@ti.com
---
Hi Florian,
On 09/01/2014 17:47, Florian Vaussard wrote:
Hello,
This series adds a number of improvements to Gumstix Overo.
Thanks for that nice series.
Patch 1+2: fix an issue with the vendor prefix (reported long ago by Javier
Martinez Canillas)
Patch 3+4: add some missing pinctrl
Hi Nishanth,
On 06/01/2014 23:37, Nishanth Menon wrote:
MMC 8 bit mode operation depends on dip switch setting which is not
obvious - The current board file has this description. However, with
removal of the board file in the future, this information will be lost
and has to be rediscovered.
Hi Nishanth,
On 17/12/2013 20:45, Nishanth Menon wrote:
On 12/09/2013 03:55 PM, Nishanth Menon wrote:
Craneboard is a hardware development platform based on the Sitara
AM3517 ARM Cortex - A8 microprocessor device - see [1] for more
details. Add basic devices for craneboard as replacement for
On 18/12/2013 18:02, Nishanth Menon wrote:
On 12/18/2013 10:57 AM, Benoit Cousson wrote:
On 17/12/2013 20:45, Nishanth Menon wrote:
On 12/09/2013 03:55 PM, Nishanth Menon wrote:
Craneboard is a hardware development platform based on the Sitara
AM3517 ARM Cortex - A8 microprocessor device
Hi Sourav,
On 18/12/2013 18:43, Sourav Poddar wrote:
Benoit,
On Wednesday 27 November 2013 01:01 PM, Sourav Poddar wrote:
The patch series adds support for enabling gpio, pwm backlight and
matrix gpio keys on am43x-gp-evm.
Done on top of 3.13-rc1 + tero clock series(1) + Afzal's basic gp
On 18/12/2013 19:15, Sourav Poddar wrote:
On Wednesday 18 December 2013 11:19 PM, Benoit Cousson wrote:
Hi Sourav,
On 18/12/2013 18:43, Sourav Poddar wrote:
Benoit,
On Wednesday 27 November 2013 01:01 PM, Sourav Poddar wrote:
The patch series adds support for enabling gpio, pwm backlight
-by: Roger Quadros rog...@ti.com
Acked-by: Paul Walmsley p...@pwsan.com
Will you pick this up for the -rc series, or do you want me or Tony to?
Roger writes that this one's pretty important.
I guess, it is better for you to take it. I don't have anything queued
for -rc.
Acked-by: Benoit Cousson bcous
Hi Peter,
On 28/11/2013 10:28, Peter Ujfalusi wrote:
Since in DT booted kernel dummy regulators are no longer supported we need
to provide valid phandle for the regulator needed by the backlight.
On the board VBAT is used to power the LCD backlight(s).
Signed-off-by: Peter Ujfalusi
Hi Jyri,
A side question related to audio cape support on BBB. In the official
3.8.13 CircuitCo version the HDMI audio support was breaking the
audio-cape support due to some bad hacks in the mcasp driver.
Is this still the case with you series?
Thanks,
Benoit
On 19/11/2013 13:21, Jyri
Hi Sebastian,
On 23/10/2013 00:49, Sebastian Reichel wrote:
This patchset adds misc. hardware elements to the Nokia N900 DTS
file. Apart from the last two patches the kernel drivers in 3.12
are already capable of handling the DT entries.
The series is based on
On 23/10/2013 10:19, Tony Lindgren wrote:
* Bryan Wu coolo...@gmail.com [131022 10:47]:
On Tue, Oct 22, 2013 at 10:37 AM, Tony Lindgren t...@atomide.com wrote:
* Bryan Wu coolo...@gmail.com [131022 10:23]:
On Tue, Oct 22, 2013 at 10:06 AM, Tony Lindgren t...@atomide.com wrote:
* Sebastian
Hi Peter,
On 23/10/2013 11:32, Peter Ujfalusi wrote:
Hi,
When the omap5-evm.dts file has been renamed to omap5-uevm.dts and the sEVM
support got deprecated in favor of uEVM (or Panda5) the content was not
validated.
The reset GPIO is different on uEVM compared to sEVM and uEVM does not have
Hi Tony,
Please pull the branch for even more OMAP Device Tree for v3.13 or later.
Thanks,
Benoit
The following changes since commit 6a96867844895008558810853c7838af39dd317c:
ARM: dts: AM33xx+: Add i2c aliases (2013-10-22 11:05:42 +0200)
are available in the git repository at:
On 22/10/2013 09:46, Peter Ujfalusi wrote:
Hi,
On 10/21/2013 10:01 PM, Sergei Shtylyov wrote:
diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi
index c328d5c..defaad1 100644
--- a/arch/arm/boot/dts/am4372.dtsi
+++ b/arch/arm/boot/dts/am4372.dtsi
@@ -633,5 +633,32 @@
Hi Enric,
On 19/10/2013 22:55, Enric Balletbo i Serra wrote:
Add mmc1 dt node to IGEP COM AQUILA board.
I've just applied it.
Please note that since we are already at -rc6 and since all the
maintainers are actually visiting Edinburgh for KS and ELCE, I doubt all
the latest patches will
Hi Tony,
Please pull the branch for few more OMAP Device Tree for v3.13 or later.
Thanks,
Benoit
The following changes since commit 6cf02dbb4b71f1c0c9acec89ae2df3b2318135f4:
ARM: dts: dra7-evm: Add mmc2 node for eMMC support (2013-10-11 21:15:02 +0200)
are available in the git repository
Hi Sebastian,
Thanks to Tony, I've just realized that I missed all your patches, that
for some reason ended-up in my junk folder :-(
That being said, I cannot apply any of your DTS patches! What base
branch are you using?
Could you repost all your pending DTS patches in one series rebased
Hi Mark,
On 04/10/2013 10:15, Mark Jackson wrote:
NanoBone Specification:
---
CPU:
TI AM335x
Memory:
256MB DDR3
128MB NOR flash
128KB FRAM
Ethernet:
2 x 10/100 connected to SMSC LAN8710 PHY
USB:
1 x USB2.0 Type A
I2C:
2Kbit EEPROM (Microchip 24AA02)
Hi Markus,
On 14/10/2013 14:49, Markus Pargmann wrote:
Control module is not usb specific. This patch changes the label to
usb_ctrl_mod.
Signed-off-by: Markus Pargmann m...@pengutronix.de
I've just applied it.
Thanks,
Benoit
---
arch/arm/boot/dts/am33xx.dtsi | 6 +++---
1 file changed,
Hi Eric,
On 18/10/2013 08:42, Eric Witcher wrote:
Correct mcspi pin descriptions to match corresponding node name and
add chip select number to be consistent with OMAP5 TRM.
Signed-off-by: Eric Witcher ewitc...@mindspring.com
Applied on my tree.
Thanks,
Benoit
---
Hi Sebastian,
On 22/10/2013 16:44, Sebastian Reichel wrote:
Hi Benoit,
On Tue, Oct 22, 2013 at 02:48:45PM +0200, Benoit Cousson wrote:
Thanks to Tony, I've just realized that I missed all your patches,
that for some reason ended-up in my junk folder :-(
oh :( Can you check why they ended up
Hi Nishanth,
On 16/10/2013 17:39, Nishanth Menon wrote:
Hi,
This series enables the use of cpufreq-cpu0 generic driver for all
OMAP and related derivatives. Only patch#8 in the series, which
introduces CPU clock nodes, depends on Tero's V8 patch series for clock
nodes[1]
I will stop copy
Hi Jyri,
On 20/10/2013 19:04, Jyri Sarha wrote:
Hi Benoit,
I rebased the DTS patches on top of
git://git.kernel.org/pub/scm/linux/kernel/git/bcousson/linux-omap-dt.git
for_3.13/dts -branch
and tested the result. Hope that was the right branch.
Yes, thanks for the update.
I've just applied
-by: Lokesh Vutla lokeshvu...@ti.com
Signed-off-by: Benoit Cousson bcous...@baylibre.com
I added all the author you listed in a more formal way.
Regards,
Benoit
Thanks and regards,
Lokesh
Testing:
Tested EDMA, mmc, sham, aes, des, i2c0, cpsw, matric-keypad on AM4372 EPOS EVM
with the addition
On 16/10/2013 02:35, Tony Lindgren wrote:
* Aaro Koskinen aaro.koski...@iki.fi [131015 13:36]:
Add minimal DT support for Nokia N950 N9 phones. The same functionality
that is provided by the current board file should work: serial console,
USB, OneNAND and MMC.
Signed-off-by: Aaro Koskinen
Hi Roger,
On 18/10/2013 14:00, Roger Quadros wrote:
Hi Benoit,
Could you please include this one for 3.13?
Without this OTG port will be broken for beagle. Thanks.
I've just applied it.
Thanks,
Benoit
cheers,
-roger
On 10/07/2013 01:46 PM, Roger Quadros wrote:
The generic PHY framewrok
+ Tony
Hi Jyri,
The DTS part looks fine to me, but does not apply at all on my branch,
Could you rebase it and repost it without the driver part to avoid any
issue during the driver merge?
Thanks,
Benoit
On 18/10/2013 17:37, Jyri Sarha wrote:
The v4 version of patches can be found here:
Hi Kishon,
On 16/10/2013 15:17, Kishon Vijay Abraham I wrote:
Benoit,
On Tuesday 15 October 2013 11:19 AM, Kishon Vijay Abraham I wrote:
From: George Cherian george.cher...@ti.com
Added dr_mode property in dwc3 and set its default mode to device.
Currently dwc3 driver doesn't have support
Hi Kishon,
On 16/10/2013 15:27, Nishanth Menon wrote:
On 10/16/2013 08:17 AM, Kishon Vijay Abraham I wrote:
Benoit,
On Thursday 10 October 2013 04:19 PM, Kishon Vijay Abraham I wrote:
smps10 should be enabled only in the case of host mode. So stop
doing always_on, boot_on from smps10_out1.
Hi Lokesh,
On 12/10/2013 15:26, Lokesh Vutla wrote:
Hi Benoit,
On Thursday 29 August 2013 06:22 PM, Lokesh Vutla wrote:
Add the AM33xx RNG module's device tree data.
Also add Documentation file describing the data
for the RNG module.
Seems you missed this patch. Please consider this for this
Hi Roger,
On 14/10/2013 11:20, Roger Quadros wrote:
Hi Benoit,
On 10/10/2013 06:34 PM, Felipe Balbi wrote:
On Mon, Oct 07, 2013 at 04:28:13PM +0300, Roger Quadros wrote:
The generic PHY framewrok expects different properties than the
old USB PHY framework. Supply those properties.
Fixes USB
Hi Rajendra,
On 09/10/2013 18:45, Benoit Cousson wrote:
+ A couple of DT maintainers
On 09/10/2013 18:41, Rajendra Nayak wrote:
On Wednesday 09 October 2013 08:43 PM, Benoit Cousson wrote:
Hi Rajendra,
On 09/10/2013 12:11, Rajendra Nayak wrote:
On OMAP we have co-processor IPs, memory
Hi Nishanth,
On 10/10/2013 18:44, Nishanth Menon wrote:
Do not reset GPIO1 at boot-up because GPIO 7 in GPIO1 block is used on
OMAP4460 PandaBoard-ES to select voltage register in TPS62361 which
supplies VDD_MPU.
Without this, OMAP4460 PandaBoard-ES boards fail to boot-up because
MPU voltage
Belloni (1):
ARM: dts: AM33XX: Add PMU support
Balaji T K (2):
ARM: dts: am335x-bone-common: correct mux mode for cmd line
ARM: dts: am335x-evm[sdk]: switch mmc1 to 4-bit mode
Benoit Cousson (1):
ARM: OMAP5: hwmod: add missing ocp2scp hwmod data
Benoit Parrot (1
Hi Tony,
On 11/10/2013 20:03, Tony Lindgren wrote:
Hi Benoit,
* Benoit Cousson bcous...@baylibre.com [131011 09:50]:
Add the minimal DTS support for DRA7xx based SoC core.
Add the initial support for N900 and gta04 phones.
Enable USB3 on OMAP5 evm board.
Add support for cryto accelerators
Add
Hi Balaji,
On 11/10/2013 18:44, Balaji T K wrote:
On Thursday 10 October 2013 12:21 AM, Sekhar Nori wrote:
On Monday 07 October 2013 09:55 PM, Balaji T K wrote:
Add mmc1 dt node to dra7-evm board.
Input for ldo1 regulator is controlled by gpio 5 of pcf8575 chip (0x21)
on i2c1 bus. When dt
Hi Tony,
Please pull the updated branch for OMAP Device Tree for v3.13.
I removed the 2 conflicting patches, and added 2 mores for dra7 to compensate
:-)
Thanks,
Benoit
The following changes since commit d0e639c9e06d44e713170031fe05fb60ebe680af:
Linux 3.12-rc4 (2013-10-06 14:00:20 -0700)
] http://marc.info/?l=linux-omapm=138139106312786w=2
Cc: Benoit Cousson bcous...@baylibre.com
Signed-off-by: Sricharan R r.sricha...@ti.com
---
Acked-by: Santosh Shilimkar santosh.shilim...@ti.com
I've just applied it for 3.13.
Thanks,
Benoit
--
To unsubscribe from this list: send the line
Hi Rajendra,
On 09/10/2013 09:37, Rajendra Nayak wrote:
On Wednesday 09 October 2013 12:54 PM, Paul Walmsley wrote:
Hi Benoît, Rajendra,
On Tue, 20 Aug 2013, Rajendra Nayak wrote:
Now that we have DT bindings to specify which devices on the SoC should not
be reset or idled, get rid of the
Hi Rajendra,
On 09/10/2013 12:11, Rajendra Nayak wrote:
On OMAP we have co-processor IPs, memory controllers,
GPIOs which control regulators and power switches to
PMIC, and SoC internal Bus IPs, some or most of which
should either not be reset or idled or both at init.
(In some cases there are
+ A couple of DT maintainers
On 09/10/2013 18:41, Rajendra Nayak wrote:
On Wednesday 09 October 2013 08:43 PM, Benoit Cousson wrote:
Hi Rajendra,
On 09/10/2013 12:11, Rajendra Nayak wrote:
On OMAP we have co-processor IPs, memory controllers,
GPIOs which control regulators and power switches
Hi Javier
On 07/10/2013 17:12, Javier Martinez Canillas wrote:
Hi Benoit,
This series are some enhancements and cleanups for IGEP boards
that it would be great if can make it for v3.13.
This is a third version of the patch-set that addresses some issues
raised by Roger Quadros and is composed
Hi Joel,
n 05/10/2013 21:04, Joel Fernandes wrote:
These patches are some minor fixups and changes to commit messages to the
AM33XX crypto (aes, sham) patches with reference to the comments at:
http://comments.gmane.org/gmane.linux.drivers.devicetree/45961
Joel Fernandes (1):
ARM: dts:
Hi Nishanth,
On 08/10/2013 17:43, Nishanth Menon wrote:
On 09/19/2013 02:11 PM, Nishanth Menon wrote:
This allows the palmas pm_power_off to kick in on power off command
and switch off the board.
Signed-off-by: Nishanth Menon n...@ti.com
---
Based on: (benoit's for_3.13/dts branch)
Hi Javier,
On 07/10/2013 13:54, Javier Martinez Canillas wrote:
On 10/07/2013 12:43 PM, Roger Quadros wrote:
Javier,
On 10/05/2013 03:04 AM, Javier Martinez Canillas wrote:
Commit ad871c10b (ARM: dts: OMAP: Add usb_otg and glue data to OMAP3+ boards)
added USB OTG support for most OMAP
On 07/10/2013 14:02, Javier Martinez Canillas wrote:
On 10/07/2013 01:58 PM, Benoit Cousson wrote:
Hi Javier,
On 07/10/2013 13:54, Javier Martinez Canillas wrote:
On 10/07/2013 12:43 PM, Roger Quadros wrote:
Javier,
On 10/05/2013 03:04 AM, Javier Martinez Canillas wrote:
Commit ad871c10b
Hi Enric,
On 03/10/2013 20:17, Tony Lindgren wrote:
* Javier Martinez Canillas martinez.jav...@gmail.com [130925 06:18]:
On Tue, Sep 10, 2013 at 4:55 PM, Enric Balletbo i Serra
eballe...@gmail.com wrote:
From: Enric Balletbo i Serra eballe...@iseebcn.com
Hi all,
These two patches introduces
Hi Balaji,
On 27/09/2013 13:35, Balaji T K wrote:
pinmux_emmc_pins: mux mode for cmd line should be MODE2
to detect eMMC on beagle bone black and beagle bone white + eMMC cape.
Signed-off-by: Balaji T K balaj...@ti.com
Tested-by: Felipe Balbi ba...@ti.com
---
based on
Hi Balaji,
On 27/09/2013 13:35, Balaji T K wrote:
set bus-width to make SD card operate in 4 bit mode.
Signed-off-by: Balaji T K balaj...@ti.com
---
based on
git://git.kernel.org/pub/scm/linux/kernel/git/bcousson/linux-omap-dt.git
for_3.13/dts
arch/arm/boot/dts/am335x-evm.dts |1 +
On 04/10/2013 04:00, Joel Fernandes wrote:
On 10/03/2013 08:25 AM, Benoit Cousson wrote:
+ DT list and DT maintainers.
Hi Joel,
Thanks for the update. It looks good to me.
For the new bindings added below;
.../devicetree/bindings/crypto/omap-aes.txt| 34
On 30/09/2013 17:13, Joel Fernandes wrote:
Signed-off-by: Joel Fernandes jo...@ti.com
Even if this is obvious, a small changelog is always recommended.
Thanks,
Benoit
---
arch/arm/boot/dts/am33xx.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git
On 02/10/2013 15:54, David Gibson wrote:
On Tue, Oct 01, 2013 at 03:54:20PM -0500, Rob Herring wrote:
On Tue, Oct 1, 2013 at 10:06 AM, Benoit Cousson bcous...@baylibre.com wrote:
Hi Rob,
On 01/10/2013 15:17, Rob Herring wrote:
On 10/01/2013 03:06 AM, Benoit Cousson wrote:
+ more DT
Hi Roger,
Yes, I will. I've been waiting for these ones for so long :-)
Thanks,
Benoit
On 03/10/2013 12:34, Roger Quadros wrote:
Hi Benoit,
Could you please take the device tree related patches [5 to 10] in this series?
Thanks.
cheers,
-roger
On 09/24/2013 11:53 AM, Roger Quadros wrote:
Hi Stephen,
On 02/10/2013 00:22, Stephen Warren wrote:
On 09/24/2013 10:52 AM, Benoit Cousson wrote:
Hi All,
Following the discussion that happened during LCE-2013 and the email
thread started by Tomasz few months ago [1], here is a first attempt
to introduce:
- a schema language to define
+ DT list and DT maintainers.
Hi Joel,
Thanks for the update. It looks good to me.
For the new bindings added below;
.../devicetree/bindings/crypto/omap-aes.txt| 34 ++
.../devicetree/bindings/crypto/omap-sham.txt | 31 +
I will need the acked-by from one of
- Documentation/devicetree/bindings/regulator/palmas-pmic.txt
Boot Tested on DRA7 d1 Board.
Signed-off-by: Keerthy j-keer...@ti.com
Acked-by: Nishanth Menon n...@ti.com
[bcous...@baylibre.com: Fix indentation and changelog]
Signed-off-by: Benoit Cousson bcous...@baylibre.com
---
arch/arm/boot/dts
On 03/10/2013 14:05, Benoit Cousson wrote:
Hi Roger,
Yes, I will. I've been waiting for these ones for so long :-)
In fact it does not apply correctly on my for_3.13/dts branch :-(
error: arch/arm/boot/dts/omap3-beagle.dts: patch does not apply
Patch failed at 0004 ARM: dts: omap3-beagle
Hi David,
On 02/10/2013 16:29, David Gibson wrote:
On Tue, Oct 01, 2013 at 04:22:24PM -0600, Stephen Warren wrote:
On 09/24/2013 10:52 AM, Benoit Cousson wrote:
Hi All,
Following the discussion that happened during LCE-2013 and the email
thread started by Tomasz few months ago [1], here
On 03/10/2013 15:58, Roger Quadros wrote:
Hi Benoit,
On 10/03/2013 04:44 PM, Benoit Cousson wrote:
On 03/10/2013 14:05, Benoit Cousson wrote:
Hi Roger,
Yes, I will. I've been waiting for these ones for so long :-)
In fact it does not apply correctly on my for_3.13/dts branch :-(
error
Hi Jon,
On 01/10/2013 17:17, Jon Loeliger wrote:
Hi Rob,
On 01/10/2013 15:17, Rob Herring wrote:
On 10/01/2013 03:06 AM, Benoit Cousson wrote:
+ more DT maintainers folks
Hi all,
I know this is mostly boring user space code, but I was expecting a
little bit of comments about at least
some base for further discussion during
ARM KS 2013.
I feel alone :-(
If you have any comment, go ahead!
Thanks,
Benoit
On 24/09/2013 18:52, Benoit Cousson wrote:
Hi All,
Following the discussion that happened during LCE-2013 and the email
thread started by Tomasz few months ago [1], here
Hi Rob,
On 01/10/2013 15:17, Rob Herring wrote:
On 10/01/2013 03:06 AM, Benoit Cousson wrote:
+ more DT maintainers folks
Hi all,
I know this is mostly boring user space code, but I was expecting a
little bit of comments about at least the bindings syntax:-(
I'd like to know
Hi Joel,
On 26/09/2013 00:01, Joel Fernandes wrote:
Following series is a collection of dts patches for the below features:
crypto:
aes, sha on am335x
aes, des on am437x
aes, des on omap4
display:
beaglebone black HDMI
am335x-evm panel
Series is based on Benoit Cousson's
On 26/09/2013 00:01, Joel Fernandes wrote:
OMAP4 has an AES module that uses the omap-aes crypto driver.
Add DT entries for the same.
Signed-off-by: Joel Fernandes jo...@ti.com
---
arch/arm/boot/dts/omap4.dtsi | 10 ++
1 file changed, 10 insertions(+)
diff --git
Hi Aaro,
On 21/09/2013 01:40, Aaro Koskinen wrote:
gpmc,sync-clki-ps is not defined/documented, it should be
gpmc,sync-clk-ps instead.
Thanks for the fix. I've just applied it with a slight change in the
subject for consistency:
ARM: dts: omap3-devkit8000: fix a typo in GMPC node
Regards,
+ Sekhar
Hi Balaji,
On 26/08/2013 15:53, Balaji T K wrote:
Add mmc2 dt node to dra7-evm board
and model eMMC vcc as fixed regulator.
Signed-off-by: Balaji T K balaj...@ti.com
---
arch/arm/boot/dts/dra7-evm.dts | 14 ++
1 files changed, 14 insertions(+), 0 deletions(-)
diff
Hi All,
Following the discussion that happened during LCE-2013 and the email
thread started by Tomasz few months ago [1], here is a first attempt
to introduce:
- a schema language to define the bindings accurately
- DTS validation during device tree compilation in DTC itself
[1]
Signed-off-by: Benoit Cousson bcous...@baylibre.com
---
scripts/dtc/schema.c | 234 ++-
1 file changed, 233 insertions(+), 1 deletion(-)
diff --git a/scripts/dtc/schema.c b/scripts/dtc/schema.c
index dd134d6..a797821 100644
--- a/scripts/dtc/schema.c
.
dtc-lexer: Do not duplicate the string which contains literals because the
string is directly converted afterward to an integer and is never used again.
livetree: Add a bunch of free helper functions to clean properly the dt.
Signed-off-by: Fabien Parent fpar...@baylibre.com
Signed-off-by: Benoit
description;
value = ti,omap4430-timer;
};
Signed-off-by: Fabien Parent fpar...@baylibre.com
Signed-off-by: Benoit Cousson bcous...@baylibre.com
---
scripts/dtc/.gitignore| 2 +-
scripts/dtc/Makefile | 9 +-
scripts/dtc/dtc.c | 19 ++-
scripts/dtc/dtc.h | 11
to missing
constraints.
Activate the verbose mode by default into the Makefile.
Usage example:
dtc -M ./bindings -B 1 file.dts
A count of errors found so far as also been added and is printed
on each error.
Signed-off-by: Fabien Parent fpar...@baylibre.com
Signed-off-by: Benoit Cousson bcous
is a string array for the dts above one can use the following schema:
/ {
compatible = abc;
abc {
type = integer;
};
def {
type = string;
};
};
Signed-off-by: Fabien Parent fpar...@baylibre.com
Signed-off-by: Benoit Cousson bcous...@baylibre.com
---
scripts/dtc/data.c
-by: Fabien Parent fpar...@baylibre.com
Signed-off-by: Benoit Cousson bcous...@baylibre.com
---
scripts/dtc/schema-test.c | 10
scripts/dtc/schema.c | 63 --
scripts/dtc/tests/schemas/nodes-count-1.schema | 5 ++
scripts/dtc
/;
/ {
compatible = ti,omap[0-9]+-timer;
ti,hwmods {
is-required;
};
};
Signed-off-by: Fabien Parent fpar...@baylibre.com
Signed-off-by: Benoit Cousson bcous...@baylibre.com
---
scripts/dtc/schema-test.c| 6 ++
scripts/dtc/schema.c
as well four test files for the feature.
Usage example:
node {
compatible = array_size;
myarray = 0 1 2 3 4;
};
Schema:
/dts-v1/;
/ {
compatible = array_size;
myarray {
length = 5;
};
};
Signed-off-by: Fabien Parent fpar...@baylibre.com
Signed-off-by: Benoit Cousson
as specified inside a schema.
Add as well a routine to print error message using these informations in case
of validation error.
Signed-off-by: Fabien Parent fpar...@baylibre.com
Signed-off-by: Benoit Cousson bcous...@baylibre.com
---
scripts/dtc/dtc-parser.tab.c_shipped | 595
subnode 'subnode1', 'subnode2', and
'abc' with the schema below:
/dts-v1/;
/ {
compatible = comp;
children = abc, subnode[0-9];
};
Signed-off-by: Fabien Parent fpar...@baylibre.com
Signed-off-by: Benoit Cousson bcous...@baylibre.com
---
scripts/dtc/schema-test.c
element of an array has the correct value one
can use the following constraint:
prop1 {
type = integer;
value@2 = 2;
};
or
prop2 {
type = string;
value@1 = value1;
};
Signed-off-by: Fabien Parent fpar...@baylibre.com
Signed-off-by: Benoit Cousson
have the
value 0xa.
Signed-off-by: Fabien Parent fpar...@baylibre.com
Signed-off-by: Benoit Cousson bcous...@baylibre.com
---
scripts/dtc/schema-test.c | 16 +++
scripts/dtc/schema.c| 126 +++-
scripts/dtc/tests/schemas/parent
From: Fabien Parent fpar...@baylibre.com
Introduce a couple of real schema for OMAP DTS files. For the moment validate
only: MPU, DSP, INTC, IVA, TIME and COUNTER.
Signed-off-by: Fabien Parent fpar...@baylibre.com
Signed-off-by: Benoit Cousson bcous...@baylibre.com
---
bindings/arm/omap
From: Fabien Parent fpar...@baylibre.com
Add the path of the bindings schema directory on the command line used
for compiling the dts files. The dts files will be validated against all the
matching schemas found.
Signed-off-by: Fabien Parent fpar...@baylibre.com
Signed-off-by: Benoit Cousson
Hi Tony,
On 18/09/2013 02:02, Tony Lindgren wrote:
* Luca Coelho l...@coelho.fi [130916 23:35]:
On Tue, 2013-09-17 at 09:26 +0300, Luca Coelho wrote:
Both patches look good to me, though I didn't have the time to retest
them.
Actually I don't even have a Blaze device anymore, so I can't
Hi Tony,
Please pull few fixes for OMAP DTS.
Thanks,
Benoit
The following changes since commit 272b98c6455f00884f0350f775c5342358ebb73f:
Linux 3.12-rc1 (2013-09-16 16:17:51 -0400)
are available in the git repository at:
Hi Enric,
On 10/09/2013 17:38, Enric Balletbo Serra wrote:
2013/9/10 Enric Balletbo i Serra eballe...@gmail.com:
Add pinmux configuration for MCBSP2 connected to the TDM interface. With
this configuration the Headset modules works as expected.
Signed-off-by: Enric Balletbo i Serra
Hi Enric
On 18/09/2013 12:24, Enric Balletbo Serra wrote:
Hi Benoit,
2013/9/18 Benoit Cousson bcous...@baylibre.com:
Hi Tony,
Please pull few fixes for OMAP DTS.
Thanks,
Benoit
The following changes since commit 272b98c6455f00884f0350f775c5342358ebb73f:
Linux 3.12-rc1 (2013-09-16 16
Hi Tony,
Please pull few fixes for OMAP DTS. This take #2 contains one more fix I missed
from Enric.
Thanks,
Benoit
The following changes since commit 272b98c6455f00884f0350f775c5342358ebb73f:
Linux 3.12-rc1 (2013-09-16 16:17:51 -0400)
are available in the git repository at:
1 - 100 of 950 matches
Mail list logo
