On 14/11/12 02:30, Ricardo Neri wrote:
Being the name of a machine driver, it aims to describe the connection between
the HDMI IP of the processor and the companion chip it uses to connect to the
outside world. This name tries to follow the same naming convention as in
the OMAP-ABE-TWL6040
Use a dedicated member to store dmaengine data so that drivers can
use private data for their own purposes.
Signed-off-by: Liam Girdwood l...@ti.com
Signed-off-by: Russell King rmk+ker...@arm.linux.org.uk
---
include/sound/pcm.h |2 ++
sound/soc/soc-dmaengine-pcm.c |2 +-
2
On Fri, 2012-04-27 at 19:45 +0530, Shilimkar, Santosh wrote:
+ Peter and Liam to comment
On Fri, Apr 27, 2012 at 7:28 PM, Russell King - ARM Linux
li...@arm.linux.org.uk wrote:
Can someone please hint on what audio is supported on these two OMAP
boards? From what I can tell, the answer
On Tue, 2012-04-24 at 19:02 -0700, Oleg Matcovschi wrote:
Change-Id: I4ba9de0de4681332539246ccc5e11a7a8fb32e79
Signed-off-by: Oleg Matcovschi oleg.matcovs...@ti.com
---
v1:
initial revision
v2:
resending patch including maintainers
sound/soc/omap/omap-pcm.c |4
1 files
On Wed, 2012-02-15 at 17:37 +0200, Peter Ujfalusi wrote:
Allow dai drivers to register kcontrols.
Signed-off-by: Peter Ujfalusi peter.ujfal...@ti.com
---
include/sound/soc.h |2 ++
sound/soc/soc-core.c | 31 +++
2 files changed, 33 insertions(+), 0
On Fri, 2011-12-30 at 04:04 +0100, Janusz Krzysztofik wrote:
This functionality has just been implemented in the cx20442 codec
driver, no need to keep it here duplicated.
Once done, remove the no longer used AMS_DELTA_LATCH2_MODEM_NRESET
symbol from the board header file and a call to the
On Thu, 2011-12-22 at 13:04 +, Mark Brown wrote:
On Thu, Dec 22, 2011 at 02:42:40PM +0200, Peter Ujfalusi wrote:
include/linux/platform_data/omap-abe-twl6040.h | 48
omap-abe-mcpdm-twl6040 please. Seriously, just drop the abe - it's not
an optional
On Wed, 2011-12-14 at 11:46 +0200, Peter Ujfalusi wrote:
Hello,
the following series will add ASoC support for PandaBoards.
PandaBoards have different audio routings compared to SDP4430/Blaze boards,
but
the differences not that big to justify a new ASoC machine driver.
Main changes:
-
On Sun, 2011-12-11 at 21:12 +0100, Janusz Krzysztofik wrote:
Don't use Amstrad Delta custom I/O functions any longer, replace them
with GPIO. Old pin definitions, no longer used by the modem bits either,
can be dropped.
Depends on patch 2/10 ARM: OMAP1: Convert Amstrad E3 latches to
On Tue, 2011-09-13 at 13:27 +0100, Mark Brown wrote:
On Tue, Sep 13, 2011 at 03:11:41PM +0300, Péter Ujfalusi wrote:
Would you have time to take a look at this series (it got the Tested-by
from
Jarkko)?
I'm fine with it, I'm waiting for Liam's review.
Acked-by: Liam Girdwood l
On 22/08/11 23:39, Hilman, Kevin wrote:
Liam Girdwood l...@ti.com writes:
On 05/08/11 20:33, Hilman, Kevin wrote:
Mark Brown broo...@opensource.wolfsonmicro.com writes:
On Thu, Jul 28, 2011 at 02:48:57PM +0300, Tero Kristo wrote:
OMAP SMPS regulator driver provides access to OMAP voltage
On 22/08/11 08:13, Ujfalusi, Peter wrote:
On Friday 19 August 2011 15:04:20 Tony Lindgren wrote:
It seems OK to me.
Thanks!
But for the -rc cycle it has potential for
fixes for features that never worked flame bait. If you guys
are OK to deal with that then go ahead.
Hrm, I have not
On 05/08/11 20:33, Hilman, Kevin wrote:
Mark Brown broo...@opensource.wolfsonmicro.com writes:
On Thu, Jul 28, 2011 at 02:48:57PM +0300, Tero Kristo wrote:
OMAP SMPS regulator driver provides access to OMAP voltage processor
controlled regulators. These include VDD_MPU and VDD_CORE for OMAP3
On Fri, 2011-07-08 at 17:56 +0200, Kristo, Tero wrote:
This commit adds two things to the TWL regulator driver code :
* It extends the twl4030_set_voltage() and twl4030_get_voltage()
functions to understand that VDD1 and VDD2 are different regulators
from all the other regulators:
On 07/07/11 16:57, Mark Brown wrote:
On Thu, Jul 07, 2011 at 03:27:50PM +0300, Peter Ujfalusi wrote:
The current McPDM driver design is not suitable to support both
the ABE and Legacy DMA operating modes. Therefore remove most
In what way is it not suitable?
It cant support both the ABE
On 07/07/11 17:53, Mark Brown wrote:
On Thu, Jul 07, 2011 at 05:32:42PM +0100, Liam Girdwood wrote:
On 07/07/11 16:57, Mark Brown wrote:
On Thu, Jul 07, 2011 at 03:27:50PM +0300, Peter Ujfalusi wrote:
The current McPDM driver design is not suitable to support both
the ABE and Legacy DMA
On 22/05/11 23:48, Mark Brown wrote:
On Sun, May 22, 2011 at 09:21:23PM +0100, Graeme Gregory wrote:
Adding support for the twl6025. Major difference in the twl6025 is the
group functionality has been removed from the chip so this affects how
regulators are enabled and disabled.
Acked-by:
Acked-by: Liam Girdwood l...@ti.com
--
To unsubscribe from this list: send the line unsubscribe linux-omap in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
On 23/05/11 12:13, Balbi, Felipe wrote:
Hi,
On Mon, May 23, 2011 at 10:58:27AM +0100, Liam Girdwood wrote:
On 22/05/11 23:51, Mark Brown wrote:
On Sun, May 22, 2011 at 09:21:24PM +0100, Graeme Gregory wrote:
The twl6025 uses a different regulator for USB than the 6030 so select
the correct
On Sun, 2011-05-22 at 14:50 +0800, Mark Brown wrote:
On Fri, May 20, 2011 at 07:03:51PM +0530, Balaji T K wrote:
TWL6030: regulator is enabled via VREG_STATE
TWL4030: regulator is enabled via VREG_GRP
Since there is nothing common, split twlreg_enable similar to other
regulator_ops
On Wed, 2011-05-18 at 15:17 +0100, Graeme Gregory wrote:
On 16/05/2011 10:08, T Krishnamoorthy, Balaji wrote:
On Thu, May 12, 2011 at 6:57 PM, Graeme Gregory g...@slimlogic.co.uk
wrote:
Adding support for the twl6025. Major difference in the twl6025 is the
group functionality has been
...@opensource.wolfsonmicro.com
Cc: Liam Girdwood l...@ti.com
Cc: Paul Mundt let...@linux-sh.org
Cc: Tomi Valkeinen tomi.valkei...@ti.com
Acked-by: Jarkko Nikula jhnik...@gmail.com
Signed-off-by: Tony Lindgren t...@atomide.com
Acked-by: Liam Girdwood l...@ti.com
--
To unsubscribe from this list: send
Premi pr...@ti.com
cc: Mark Brown broo...@opensource.wolfsonmicro.com
cc: Liam Girdwood l...@ti.com
cc: Jarkko Nikula jhnik...@gmail.com
---
Changes in v4:
Reposting after validating that patch still applies cleanly on
linux-omap master [46966f1]
Changed the subject
On Mon, 2011-05-09 at 15:16 +0300, Felipe Balbi wrote:
Hi,
On Mon, May 09, 2011 at 12:43:49PM +0100, Liam Girdwood wrote:
On Mon, 2011-05-09 at 12:03 +0300, Felipe Balbi wrote:
Hi,
On Sun, May 08, 2011 at 04:08:37PM +0100, Liam Girdwood wrote:
On Wed, 2011-04-27 at 13:45 +0300
On Wed, 2011-04-27 at 13:45 +0300, Felipe Balbi wrote:
Hi,
On Wed, Apr 27, 2011 at 10:39:51AM +0100, Graeme Gregory wrote:
The twl6025 uses a different regulator for USB than the 6030 so select
the correct regulator name depending on the subclass of device.
Signed-off-by: Graeme
On Wed, 2011-04-27 at 13:40 +0300, Felipe Balbi wrote:
On Wed, Apr 27, 2011 at 10:39:48AM +0100, Graeme Gregory wrote:
+ /* TWL6025 LDO regulators */
+ struct regulator_init_data *ldo1;
+ struct regulator_init_data *ldo2;
+ struct regulator_init_data
On Fri, 2011-04-01 at 10:22 +0530, Nishanth Menon wrote:
TWL6030 regulator dynamic operations such as those on vaux2 and vaux3
were reported to be broken on platforms such as pandaboard(OMAP4).
Digging deeper into the code, found that 6030 regulator support
requires quiet a bit of fixes to
On Tue, 2011-03-08 at 21:02 +0530, Abhilash K V wrote:
The i2c client device name (.2-001a in this case, including
the separator period) for the AIC23 codec on the TI AM3517-EVM
was appended to the codec_name member of am3517evm_dai to
resolve the names mismatch happening in
On Tue, 2011-02-01 at 19:53 +0200, Jarkko Nikula wrote:
On Mon, 31 Jan 2011 20:20:24 +0530
Kishon Vijay Abraham I kis...@ti.com wrote:
Modify OMAP McBSP driver to use omap hwmod framework and pm runtime APIs.
Created on top of linux OMAP master (linux-omap-2.6 :master)
Did digital
On Thu, 2011-01-06 at 08:00 -0600, David Lambert wrote:
This codec is to be used by the DMIC driver to
control the DMIC codec. This driver will be used on future
implementations of the DMIC driver to support codec specific
features.
At this time, the codec driver just registers the codec
On Wed, 2010-12-29 at 11:47 +0200, Felipe Balbi wrote:
Hi,
On Tue, Dec 28, 2010 at 07:13:58PM -0600, Lambert, David wrote:
one blank line only. BTW, are these used anywwhere outside the dmic.c
driver ? If not, it's better to move the definitions there.
They were originally in the
On Wed, 2010-12-29 at 12:44 +0200, Felipe Balbi wrote:
Hi,
On Wed, Dec 29, 2010 at 10:35:31AM +, Liam Girdwood wrote:
Even though the driver will never work with those other archs, compile
testing with several of them isn't bad at all.
This seems unnecessary since this driver
On Wed, 2010-12-29 at 14:04 +0200, Felipe Balbi wrote:
Hi,
On Wed, Dec 29, 2010 at 11:52:51AM +, Liam Girdwood wrote:
I agree that drivers should be arch independent when possible, but in
this case the OMAP DMIC DAI driver is coupled to the OMAP platform only.
i.e. it performs IO
,
dev_name(omap3pandora_snd_device-dev),
PTR_ERR(omap3pandora_dac_reg));
+ ret = PTR_ERR(omap3pandora_dac_reg);
goto fail3;
}
Acked-by: Liam Girdwood l...@slimlogic.co.uk
--
Freelance Developer, SlimLogic Ltd
ASoC
On Wed, 2010-11-24 at 14:07 +0530, Varadarajan, Charulatha wrote:
On Wed, Nov 24, 2010 at 12:53, Axel Lin axel@gmail.com wrote:
Add Patch description.
Signed-off-by: Axel Lin axel@gmail.com
---
Please resubmit with a patch description and Jarkko's Ack.
Thanks
Liam
--
On Wed, 2010-11-03 at 10:20 +0200, Jarkko Nikula wrote:
On Tue, 2 Nov 2010 10:58:59 -0600 (MDT)
Paul Walmsley p...@pwsan.com wrote:
On Tue, 2 Nov 2010, Janusz Krzysztofik wrote:
In the new code introduced with commit
cf4c87abe238ec17cd0255b4e21abd949d7f811e,
OMAP: McBSP:
] Error 2
Signed-off-by: Anand Gadiyar gadi...@ti.com
Cc: Liam Girdwood l...@slimlogic.co.uk
Cc: Mark Brown broo...@opensource.wolfsonmicro.com
---
The commit referenced above is in linux next as of 20101011
and breaks builds of the omap2plus_defconfig at least.
drivers/regulator/dummy.h
On Mon, 2010-10-04 at 08:04 -0700, Mark Brown wrote:
On Mon, Oct 04, 2010 at 03:04:53PM +0300, Jarkko Nikula wrote:
Upcoming ASoC multi-component and OMAP hwmod changes will conflict
in arch/arm/mach-omap2/devices.c. Avoid this by moving a little bit
include statement introduced by ASoC
On Fri, 2010-09-24 at 11:31 -0500, Lopez Cruz, Misael wrote:
Hi Jarkko,
ASoC Multi-Component Support moves some code from sound/soc/omap/zoom2.c
into
arch/arm/mach-omap2/board-zoom2.c. However, that code should go to
board-zoom-peripherals.c instead as there is common code and
manj...@ti.com
Cc: alsa-de...@alsa-project.org
Cc: Jarkko Nikula jhnik...@gmail.com
Cc: Peter Ujfalusi peter.ujfal...@nokia.com
Cc: Liam Girdwood l...@slimlogic.co.uk
Cc: Mark Brown broo...@opensource.wolfsonmicro.com
Cc: Tony Lindgren t...@atomide.com
Cc: Nishanth Menon n...@ti.com
On Mon, 2010-09-06 at 22:59 +0300, Eduardo Valentin wrote:
Hello,
On Fri, Sep 03, 2010 at 08:20:52PM +0200, Mark Brown wrote:
On Fri, Sep 03, 2010 at 11:00:31AM -0700, Kevin Hilman wrote:
Mark Brown broo...@opensource.wolfsonmicro.com writes:
The only thing I can think you might
On Thu, 2010-06-03 at 07:39 +0300, Peter Ujfalusi wrote:
Hello,
Tony: Could you take a look at the arch/arm patches in this series?
Thanks!
Changes since v3/4:
- Fixed commit subjects and messages for OMAP3 related patches
- Added Acked-by from Mark, and Jarkko
Intro message from the
On Wed, 2010-06-02 at 12:05 +0300, Peter Ujfalusi wrote:
Hi,
On Tuesday 01 June 2010 14:18:19 Ujfalusi Peter (Nokia-D/Tampere) wrote:
..
Liam if you are going to take the series, could you fix the patch names?
I can also resend them if it is easier for you.
Peter, I think it's
On Mon, 2010-05-31 at 11:16 +0300, Peter Ujfalusi wrote:
OMAP McBSP FIFO is word structured:
McBSP2 has 1024 + 256 = 1280 word long buffer,
McBSP1,3,4,5 has 128 word long buffer
This means, that the size of the FIFO
depends on the McBSP word size configuration.
For example on McBSP3:
On Wed, 2010-05-19 at 13:42 +0300, Eduardo Valentin wrote:
On Tue, May 18, 2010 at 10:13:10PM +0200, Liam Girdwood wrote:
This series expands the OMAP mcbsp driver to support changing it's DMA
operating
mode and smart idle mode from client drivers. It's primarily aimed at
lowering
On Wed, 2010-05-19 at 13:46 +0300, Eduardo Valentin wrote:
Hello Lian,
On Tue, May 18, 2010 at 10:13:12PM +0200, Liam Girdwood wrote:
Add a small API to configure McBSP smart idle modes
to conserve power.
I'm sorry but I didn't get the point of this patch, as you didn't add any
wider
On Wed, 2010-05-19 at 13:50 +0300, Eduardo Valentin wrote:
On Tue, May 18, 2010 at 10:13:11PM +0200, Liam Girdwood wrote:
This adds a method to set the MCBSP DMA OP mode.
OK. good. But again, why do you need set dma op mode other than inside mcbsp
code?
I think Peter has answered
This series expands the OMAP mcbsp driver to support changing it's DMA operating
mode and smart idle mode from client drivers. It's primarily aimed at lowering
the power consumption for OMAP ASoC drivers by providing methods to gate clocks
on the mcbsp interface at runtime.
I've also added a
This adds a method to set the MCBSP DMA OP mode.
Signed-off-by: Liam Girdwood l...@slimlogic.co.uk
---
arch/arm/plat-omap/include/plat/mcbsp.h |2 ++
arch/arm/plat-omap/mcbsp.c | 31 +++
2 files changed, 33 insertions(+), 0 deletions(-)
diff --git
Add a small API to configure McBSP smart idle modes
to conserve power.
Signed-off-by: Liam Girdwood l...@slimlogic.co.uk
---
arch/arm/plat-omap/include/plat/mcbsp.h | 15
arch/arm/plat-omap/mcbsp.c | 122 +++
2 files changed, 137 insertions(+), 0
Add a mechanism to register a machine specific callback
to calculate and set the McBSP Tx/Rx threshold.
Signed-off-by: Liam Girdwood l...@slimlogic.co.uk
---
sound/soc/omap/omap-mcbsp.c | 22 +-
sound/soc/omap/omap-mcbsp.h |2 ++
2 files changed, 23 insertions(+), 1
The mcbsp DMA op mode is tightly integrated with the
mcbsp client driver operation and hence is unsuitable
for userspace configuration via sysfs.
Signed-off-by: Liam Girdwood l...@slimlogic.co.uk
---
arch/arm/plat-omap/mcbsp.c | 30 +-
1 files changed, 1 insertions
On Fri, 2010-05-14 at 11:57 +0530, Nayak, Rajendra wrote:
-Original Message-
From: Mark Brown [mailto:broo...@opensource.wolfsonmicro.com]
Sent: Friday, April 23, 2010 4:49 PM
To: Nayak, Rajendra
Cc: linux-omap@vger.kernel.org; Liam Girdwood; Samuel Ortiz
Subject: Re: [PATCH
On Thu, 2010-05-13 at 19:48 +0400, Sergey Lapin wrote:
This patchs should allow to use 32-bit samples on e.g. TLV320AIC3x codec,
or others.
Signed-off-by: Sergey Lapin sla...@ossfans.org
---
Applied.
Thanks
Liam
--
Freelance Developer, SlimLogic Ltd
ASoC and Voltage Regulator Maintainer.
On Thu, 2010-05-13 at 09:19 +0100, Mark Brown wrote:
On Wed, May 12, 2010 at 12:18:38PM -0500, Jorge Eduardo Candelaria wrote:
The following patches enable McBSP driver to be used along with the
audio driver in SDP4430 and other OMAP4 based boards.
Both
Acked-by: Mark Brown
On Wed, 2010-05-12 at 11:39 +0300, Peter Ujfalusi wrote:
Hi,
On Thursday 06 May 2010 04:15:44 ext Jorge Eduardo Candelaria wrote:
The following patches enable McBSP driver to be used along with the
audio driver in SDP4430 and other OMAP4 based boards.
Changes from v1:
- Changed to
On Wed, 2010-03-17 at 17:42 -0500, Olaya, Margarita wrote:
Correction for chips:
twl6030 is Phoenix Power chip
twl6040 is Phoenix Audio chip
Signed-off-by: Margarita Olaya Cabrera magi.ol...@ti.com
Acked-by: Liam Girdwood l...@slimlogic.co.uk
--
Freelance Developer, SlimLogic Ltd
ASoC
used defines the
headset power mode: low-power, high-performance.
Signed-off-by: Misael Lopez Cruz x0052...@ti.com
Signed-off-by: Jorge Eduardo Candelaria jorge.candela...@ti.com
Signed-off-by: Margarita Olaya Cabrera magi.ol...@ti.com
Acked-by: Liam Girdwood l...@slimlogic.co.uk
--
Freelance
On Wed, 2010-03-03 at 15:08 +0200, Peter Ujfalusi wrote:
My editor removes the tailing spaces, which causes problems when
changing the soc-core.c
Removing the space.
Signed-off-by: Peter Ujfalusi peter.ujfal...@nokia.com
Acked-by: Liam Girdwood l...@slimlogic.co.uk
--
Freelance Developer
On Wed, 2010-03-03 at 15:08 +0200, Peter Ujfalusi wrote:
Create a soc level wrapper for pcm_pointer callback.
This will facilitate the soc level handling of different
HW buffers in the audio path.
Signed-off-by: Peter Ujfalusi peter.ujfal...@nokia.com
Acked-by: Liam Girdwood l
on the chain.
If none of the dai has FIFO, than the delay will be kept as
zero.
Signed-off-by: Peter Ujfalusi peter.ujfal...@nokia.com
Acked-by: Liam Girdwood l...@slimlogic.co.uk
--
Freelance Developer, SlimLogic Ltd
ASoC and Voltage Regulator Maintainer.
http://www.slimlogic.co.uk
--
To unsubscribe
On Wed, 2010-03-03 at 15:08 +0200, Peter Ujfalusi wrote:
Use the new delay calback function to report the delay through
ALSA for application caused by the internal FIFO.
Signed-off-by: Peter Ujfalusi peter.ujfal...@nokia.com
---
Acked-by: Liam Girdwood l...@slimlogic.co.uk
--
Freelance
On Wed, 2010-02-24 at 17:37 -0600, Olaya, Margarita wrote:
-Original Message-
From: Liam Girdwood [mailto:l...@slimlogic.co.uk]
Sent: Wednesday, February 24, 2010 4:38 AM
To: Olaya, Margarita
Cc: alsa-de...@alsa-project.org; linux-omap@vger.kernel.org;
broo
On Wed, 2010-02-24 at 18:17 -0600, Olaya, Margarita wrote:
-Original Message-
From: Liam Girdwood [mailto:l...@slimlogic.co.uk]
Sent: Wednesday, February 24, 2010 5:40 AM
To: Olaya, Margarita
Cc: alsa-de...@alsa-project.org; linux-omap@vger.kernel.org;
broo
On Tue, 2010-02-23 at 18:10 -0600, Olaya, Margarita wrote:
From: Misael Lopez Cruz x0052...@ti.com
In order to have TWL6030 CODEC driver as a platform driver, codec data
should be passed through twl_platform_data structure.
For twl6030 audio codec, the following data may be passed:
-
On Tue, 2010-02-23 at 18:10 -0600, Olaya, Margarita wrote:
From: Misael Lopez Cruz x0052...@ti.com
Initial version of TWL6030 codec driver.
The TWL6030 codec uses a propietary PDM-based digital audio interface.
Audio paths supported are:
- Input: Main Mic, Sub Mic, Headset Mic,
On Tue, 2010-02-23 at 18:10 -0600, Olaya, Margarita wrote:
From: Misael Lopez Cruz x0052...@ti.com
TWL6030 codec device can be powered-up/down through a specific register
writes sequence. These sequences can be used when no gpio line is
provided for AUDPWRON.
When the codec is powered-up
On Tue, 2010-02-23 at 18:10 -0600, Olaya, Margarita wrote:
Following patch series add initial support for TWL6030 codec driver.
The patch set is based on the series sent from Misael Lopez in October 2009.
Changes from v3:
- Remove snd_soc_init_card function
- Adapt to latest twl core
deletions(-)
Both looks OK for me:
Acked-by: Peter Ujfalusi peter.ujfal...@nokia.com
Acked-by: Liam Girdwood l...@slimlogic.co.uk
--
Freelance Developer, SlimLogic Ltd
ASoC and Voltage Regulator Maintainer.
http://www.slimlogic.co.uk
--
To unsubscribe from this list: send the line unsubscribe
as below
00: OFF
01: ON
10: OFF
11: SLEEP
Signed-off-by: Rajendra Nayak rna...@ti.com
Cc: Liam Girdwood l...@slimlogic.co.uk
Cc: Samuel Ortiz sa...@linux.intel.com
Cc: Mark Brown broo...@opensource.wolfsonmicro.com
---
Applied.
Thanks
Liam
--
Freelance Developer, SlimLogic Ltd
ASoC
On Wed, 2010-02-10 at 20:23 +0100, Thomas Weber wrote:
This patch expands the omap3beagle sound soc for the
beagle board clone Devkit8000.
Change log
V2
Expand omap3beagle sound soc for DevKit8000 support.
V3
Separate Kconfig for Devkit8000.
Signed-off-by: Thomas Weber
On Thu, 2010-02-11 at 12:40 +0200, Jarkko Nikula wrote:
On Thu, 11 Feb 2010 09:55:12 +
Liam Girdwood l...@slimlogic.co.uk wrote:
Since this shares the same mach driver as beagle you should share the
Kconfig option too (like the Overo).
Heh, I had just an opposite view :-)
http
On Thu, 2010-02-11 at 16:13 +0100, Thomas Weber wrote:
This patch expands the omap3beagle sound soc for the
beagle board clone DevKit8000.
Signed-off-by: Thomas Weber we...@corscience.de
Acked-by: Liam Girdwood l...@slimlogic.co.uk
--
Freelance Developer, SlimLogic Ltd
ASoC and Voltage
On Fri, 2010-02-05 at 10:45 +0200, Eduardo Valentin wrote:
Hello Anuj,
First of all, I liked the idea of unifying the regulator definitions
for boards that use twl regulators.
But I guess we need to improve a little bit.
See following comments.
On Tue, Jan 12, 2010 at 10:13:52AM
On Fri, 2010-01-29 at 13:58 +0530, Anuj Aggarwal wrote:
Commit e9ff5eb2 (Fixing infinite loop in resume path) uses wrong AIC23
register in resume function because of which register writes happen
on some non-existing registers.
Signed-off-by: Anuj Aggarwal anuj.aggar...@ti.com
Acked-by: Liam
On Thu, 2010-01-28 at 17:46 +0200, Ilkka Koskinen wrote:
Add ASoC interface for OMAP McBSP2 and McBSP3 sidetones.
Signed-off-by: Ilkka Koskinen ilkka.koski...@nokia.com
---
sound/soc/omap/omap-mcbsp.c | 187
+++
sound/soc/omap/omap-mcbsp.h |2
On Mon, 2010-01-25 at 15:06 -0600, Candelaria Villareal, Jorge wrote:
Liam Girdwood wrote:
On Fri, 2010-01-22 at 17:15 -0600, Candelaria Villareal, Jorge wrote:
McPDM is the interface between Phoenix audio codec
and the OMAP4430 processor. It enables data to be transfered
to/from
On Tue, 2010-01-26 at 10:27 +0200, Jarkko Nikula wrote:
Hi
On Mon, 25 Jan 2010 15:06:44 -0600
Candelaria Villareal, Jorge jorge.candela...@ti.com wrote:
+static int omap_mcpdm_dai_startup(struct snd_pcm_substream
*substream,
+ struct snd_soc_dai
On Fri, 2010-01-22 at 17:14 -0600, Candelaria Villareal, Jorge wrote:
From: Misael Lopez Cruz x0052...@ti.com
Allow client drivers to set the data_type (16, 32) and the
sync_mode (element, packet, etc) of the audio dma transferences.
Btw, how is 32bit mode used here ?
Is it for compacted
On Fri, 2010-01-22 at 17:15 -0600, Candelaria Villareal, Jorge wrote:
From: Misael Lopez Cruz x0052...@ti.com
McPDM platform driver is configured to use sDMA in order to transfer
to/from memory. Support for interfacing with ABE will be added later.
McPDM dai currently supports up to 4
On Fri, 2010-01-22 at 17:15 -0600, Candelaria Villareal, Jorge wrote:
McPDM is the interface between Phoenix audio codec
and the OMAP4430 processor. It enables data to be transfered
to/from Phoenix at sample rates of 88.4 or 96 KHz.
Signed-off-by: Jorge Eduardo Candelaria x0107...@ti.com
On Wed, 2010-01-13 at 22:25 +0530, Aggarwal, Anuj wrote:
Any comments on this version?
Just had a quick scan, looks fine.
Acked-by: Liam Girdwood l...@slimlogic.co.uk
--
To unsubscribe from this list: send the line unsubscribe linux-omap in
the body of a message to majord...@vger.kernel.org
Acked-by: Liam Girdwood l...@slimlogic.co.uk
diff --git a/sound/soc/omap/Makefile b/sound/soc/omap/Makefile
index d49458a..3db8a6c 100644
--- a/sound/soc/omap/Makefile
+++ b/sound/soc/omap/Makefile
@@ -23,9 +23,9 @@ obj-$(CONFIG_SND_OMAP_SOC_N810) += snd-soc-n810.o
obj
On Mon, 2009-11-16 at 15:53 +0200, Mike Rapoport wrote:
Signed-off-by: Mike Rapoport m...@compulab.co.il
---
sound/soc/omap/Kconfig |7 ---
sound/soc/omap/overo.c |2 +-
2 files changed, 5 insertions(+), 4 deletions(-)
diff --git a/sound/soc/omap/Kconfig
() || machine_is_cm_t35())) {
+ pr_debug(Incomatible machine!\n);
return -ENODEV;
}
printk(KERN_INFO overo SoC init\n);
--
1.6.4.4
Acked-by: Liam Girdwood l...@slimlogic.co.uk
Thanks
Liam
--
To unsubscribe from this list: send the line unsubscribe linux-omap
On Fri, 2009-08-21 at 00:39 +0530, Anuj Aggarwal wrote:
Adding support for TI TPS65023 regulator driver
Signed-off-by: Anuj Aggarwal anuj.aggar...@ti.com
---
drivers/regulator/tps65023-regulator.c | 631
1 files changed, 631 insertions(+), 0 deletions(-)
On Wed, 2009-08-12 at 10:17 +0530, Anuj Aggarwal wrote:
Adding support for TI TPS65023 regulator driver
Signed-off-by: Anuj Aggarwal anuj.aggar...@ti.com
---
drivers/regulator/tps65023-regulator.c | 638
1 files changed, 638 insertions(+), 0 deletions(-)
On Fri, 2009-08-07 at 16:53 +0100, Mark Brown wrote:
On Fri, Aug 07, 2009 at 08:55:26PM +0530, Anuj Aggarwal wrote:
+static const struct tps_info tps65023_regs[] = {
+ {
+ .name = VDCDC1,
+ .min_uV = 80,
+ .max_uV = 160,
+ .fixed = 0,
No need to add fixed = 0 in
On Sat, 2009-04-25 at 05:28 -0600, Paul Walmsley wrote:
During regulator registration, any error after device_register() will
cause a double-free on the struct regulator_dev 'rdev'. The bug is in
drivers/regulator/core.c:regulator_register():
...
scrub:
On Thu, 2009-03-26 at 16:21 +0200, Adrian Hunter wrote:
From 51f946af56a5de9c25b2eb6e6a33660283f84195 Mon Sep 17 00:00:00 2001
From: Adrian Hunter adrian.hun...@nokia.com
Date: Fri, 6 Mar 2009 14:51:30 +0200
Subject: [PATCH] regulator: twl4030 VAUX3 supports 3.0V
TWL4030 and TWL5030 support
On Mon, 2009-03-16 at 15:51 +, Mark Brown wrote:
On Fri, Mar 13, 2009 at 05:54:54PM -0700, David Brownell wrote:
From: David Brownell dbrown...@users.sourceforge.net
Add VPLL2 to the set of twl4030-family regulators exposed for
use by various drivers. It's commonly used to power the
On Tue, 2009-03-17 at 09:36 +0200, Adrian Hunter wrote:
Liam Girdwood wrote:
On Fri, 2009-03-06 at 14:48 -0800, David Brownell wrote:
On Friday 06 March 2009, Mark Brown wrote:
Would it make sense to make this platform data so that if a given board
requires running the chip like
On Wed, 2009-03-11 at 16:43 -0800, David Brownell wrote:
From: David Brownell dbrown...@users.sourceforge.net
Fix some refcounting issues in the regulator framework, supporting
regulator_disable() for regulators that were enabled at boot time
via machine constraints:
- Update those
On Tue, 2009-03-10 at 11:51 -0800, David Brownell wrote:
From: David Brownell dbrown...@users.sourceforge.net
The VAUX4 voltage table scrolls onto a second page in many versions
of the TWL4030 family manuals. This doesn't mean we should ignore
those values! Some boards use the (fully
On Wed, 2009-03-11 at 03:30 -0800, David Brownell wrote:
On Monday 09 March 2009, Liam Girdwood wrote:
From: David Brownell dbrown...@users.sourceforge.net
Glue between MMC and regulator stacks ... verified with
some OMAP3 boards using adjustable and configured-as-fixed
On Fri, 2009-03-06 at 14:48 -0800, David Brownell wrote:
On Friday 06 March 2009, Mark Brown wrote:
Would it make sense to make this platform data so that if a given board
requires running the chip like this it can be enabled for those boards
but it's not something people might turn on
On Sun, 2009-03-08 at 22:49 +0100, Pierre Ossman wrote:
On Sun, 8 Mar 2009 12:34:25 -0800
David Brownell davi...@pacbell.net wrote:
On Sunday 08 March 2009, Pierre Ossman wrote:
Looks good. Now what should I do with it? Merge it in the next window
good enough?
Well, after testing
On Fri, 2009-03-06 at 15:01 +0200, Adrian Hunter wrote:
TWL4030 and TWL5030 support 3.0V on VAUX3.
Signed-off-by: Adrian Hunter adrian.hun...@nokia.com
Applied.
Thanks
Liam
--
To unsubscribe from this list: send the line unsubscribe linux-omap in
the body of a message to
On Tue, 2009-03-03 at 14:59 -0800, David Brownell wrote:
On Friday 27 February 2009, Liam Girdwood wrote:
Sorry, this didn't apply. It looks like I'm missing an earlier patch(s)
here. Could you regenerate this and your core patch against latest
for-next.
Here you go.
- Dave
On Thu, 2009-02-26 at 16:02 -0800, David Brownell wrote:
On Thursday 26 February 2009, Liam Girdwood wrote:
Note that the twl4030 regulator patch referred to will need a
minor patch to work with the -next tree, because of interface
change in the regulator framework.
drivers
1 - 100 of 108 matches
Mail list logo
