RE: [PATCH] arm: dts: omap4-sdp: Add I2c pinctrl data
Hi Sourav, On Wed, Jan 30, 2013 at 12:10:18, Poddar, Sourav wrote: Hi Luciano, On Wednesday 30 January 2013 11:55 AM, Luciano Coelho wrote: Hi Sourav, On Mon, 2013-01-28 at 16:47 +0530, Sourav Poddar wrote: Booting 3.8-rc4 om omap 4430sdp results in the following error omap_i2c 4807.i2c: did not get pins for i2c error: -19 [1.024261] omap_i2c 4807.i2c: bus 0 rev0.12 at 100 kHz [1.030181] omap_i2c 48072000.i2c: did not get pins for i2c error: -19 [1.037384] omap_i2c 48072000.i2c: bus 1 rev0.12 at 400 kHz [1.043762] omap_i2c 4806.i2c: did not get pins for i2c error: -19 [1.050964] omap_i2c 4806.i2c: bus 2 rev0.12 at 100 kHz [1.056823] omap_i2c 4807a000.i2c: did not get pins for i2c error: -19 [1.064025] omap_i2c 4807a000.i2c: bus 3 rev0.12 at 400 kHz This happens because omap4 dts file is not adapted to use i2c through pinctrl framework. Populating i2c pinctrl data to get rid of the error. Tested on omap4430 sdp with 3.8-rc4 kernel. Signed-off-by: Sourav Poddar sourav.pod...@ti.com Reported-by: Santosh Shilimkar santosh.shilim...@ti.com --- Could you do the same thing for panda? I'm getting the same kind of errors with it: omap4 uses pinctrl-single driver for pinmux with DT. Currently pinctrl-single driver is getting up after I2C driver. So I2c cannot use pinctrl. The below patch solve this issue http://www.gossamer-threads.com/lists/linux/kernel/1669067 Can you try with this ? it may solve it. Thanks, Anil [...] -- To unsubscribe from this list: send the line unsubscribe linux-omap in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: [PATCH] arm: dts: omap4-sdp: Add I2c pinctrl data
On Wednesday 30 January 2013 02:13 PM, Kumar, Anil wrote: Hi Sourav, On Wed, Jan 30, 2013 at 12:10:18, Poddar, Sourav wrote: Hi Luciano, On Wednesday 30 January 2013 11:55 AM, Luciano Coelho wrote: Hi Sourav, On Mon, 2013-01-28 at 16:47 +0530, Sourav Poddar wrote: Booting 3.8-rc4 om omap 4430sdp results in the following error omap_i2c 4807.i2c: did not get pins for i2c error: -19 [1.024261] omap_i2c 4807.i2c: bus 0 rev0.12 at 100 kHz [1.030181] omap_i2c 48072000.i2c: did not get pins for i2c error: -19 [1.037384] omap_i2c 48072000.i2c: bus 1 rev0.12 at 400 kHz [1.043762] omap_i2c 4806.i2c: did not get pins for i2c error: -19 [1.050964] omap_i2c 4806.i2c: bus 2 rev0.12 at 100 kHz [1.056823] omap_i2c 4807a000.i2c: did not get pins for i2c error: -19 [1.064025] omap_i2c 4807a000.i2c: bus 3 rev0.12 at 400 kHz This happens because omap4 dts file is not adapted to use i2c through pinctrl framework. Populating i2c pinctrl data to get rid of the error. Tested on omap4430 sdp with 3.8-rc4 kernel. Signed-off-by: Sourav Poddar sourav.pod...@ti.com Reported-by: Santosh Shilimkar santosh.shilim...@ti.com --- Could you do the same thing for panda? I'm getting the same kind of errors with it: omap4 uses pinctrl-single driver for pinmux with DT. Currently pinctrl-single driver is getting up after I2C driver. So I2c cannot use pinctrl. The below patch solve this issue http://www.gossamer-threads.com/lists/linux/kernel/1669067 Can you try with this ? it may solve it. OMAP i2c driver already takes care of -EPROBE_DEFER. The issue as you see from the log is not probe failure but missing the pin information in DT blob. And thats what patch does. Regards santosh -- To unsubscribe from this list: send the line unsubscribe linux-omap in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: [PATCH] arm: dts: omap4-sdp: Add I2c pinctrl data
On Wed, 2013-01-30 at 14:18 +0530, Santosh Shilimkar wrote: On Wednesday 30 January 2013 02:13 PM, Kumar, Anil wrote: Hi Sourav, On Wed, Jan 30, 2013 at 12:10:18, Poddar, Sourav wrote: Hi Luciano, On Wednesday 30 January 2013 11:55 AM, Luciano Coelho wrote: Hi Sourav, On Mon, 2013-01-28 at 16:47 +0530, Sourav Poddar wrote: Booting 3.8-rc4 om omap 4430sdp results in the following error omap_i2c 4807.i2c: did not get pins for i2c error: -19 [1.024261] omap_i2c 4807.i2c: bus 0 rev0.12 at 100 kHz [1.030181] omap_i2c 48072000.i2c: did not get pins for i2c error: -19 [1.037384] omap_i2c 48072000.i2c: bus 1 rev0.12 at 400 kHz [1.043762] omap_i2c 4806.i2c: did not get pins for i2c error: -19 [1.050964] omap_i2c 4806.i2c: bus 2 rev0.12 at 100 kHz [1.056823] omap_i2c 4807a000.i2c: did not get pins for i2c error: -19 [1.064025] omap_i2c 4807a000.i2c: bus 3 rev0.12 at 400 kHz This happens because omap4 dts file is not adapted to use i2c through pinctrl framework. Populating i2c pinctrl data to get rid of the error. Tested on omap4430 sdp with 3.8-rc4 kernel. Signed-off-by: Sourav Poddar sourav.pod...@ti.com Reported-by: Santosh Shilimkar santosh.shilim...@ti.com --- Could you do the same thing for panda? I'm getting the same kind of errors with it: omap4 uses pinctrl-single driver for pinmux with DT. Currently pinctrl-single driver is getting up after I2C driver. So I2c cannot use pinctrl. The below patch solve this issue http://www.gossamer-threads.com/lists/linux/kernel/1669067 Can you try with this ? it may solve it. OMAP i2c driver already takes care of -EPROBE_DEFER. The issue as you see from the log is not probe failure but missing the pin information in DT blob. And thats what patch does. Yes, Santosh is right. I tried this patch, but it didn't fix the warnings. -- Luca. -- To unsubscribe from this list: send the line unsubscribe linux-omap in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
RE: [PATCH] arm: dts: omap4-sdp: Add I2c pinctrl data
On Wed, Jan 30, 2013 at 14:36:10, Coelho, Luciano wrote: On Wed, 2013-01-30 at 14:18 +0530, Santosh Shilimkar wrote: On Wednesday 30 January 2013 02:13 PM, Kumar, Anil wrote: Hi Sourav, On Wed, Jan 30, 2013 at 12:10:18, Poddar, Sourav wrote: Hi Luciano, On Wednesday 30 January 2013 11:55 AM, Luciano Coelho wrote: Hi Sourav, On Mon, 2013-01-28 at 16:47 +0530, Sourav Poddar wrote: Booting 3.8-rc4 om omap 4430sdp results in the following error omap_i2c 4807.i2c: did not get pins for i2c error: -19 [1.024261] omap_i2c 4807.i2c: bus 0 rev0.12 at 100 kHz [1.030181] omap_i2c 48072000.i2c: did not get pins for i2c error: -19 [1.037384] omap_i2c 48072000.i2c: bus 1 rev0.12 at 400 kHz [1.043762] omap_i2c 4806.i2c: did not get pins for i2c error: -19 [1.050964] omap_i2c 4806.i2c: bus 2 rev0.12 at 100 kHz [1.056823] omap_i2c 4807a000.i2c: did not get pins for i2c error: -19 [1.064025] omap_i2c 4807a000.i2c: bus 3 rev0.12 at 400 kHz This happens because omap4 dts file is not adapted to use i2c through pinctrl framework. Populating i2c pinctrl data to get rid of the error. Tested on omap4430 sdp with 3.8-rc4 kernel. Signed-off-by: Sourav Poddar sourav.pod...@ti.com Reported-by: Santosh Shilimkar santosh.shilim...@ti.com --- Could you do the same thing for panda? I'm getting the same kind of errors with it: omap4 uses pinctrl-single driver for pinmux with DT. Currently pinctrl-single driver is getting up after I2C driver. So I2c cannot use pinctrl. The below patch solve this issue http://www.gossamer-threads.com/lists/linux/kernel/1669067 Can you try with this ? it may solve it. OMAP i2c driver already takes care of -EPROBE_DEFER. The issue as you see from the log is not probe failure but missing the pin information in DT blob. And thats what patch does. Yes, Santosh is right. I tried this patch, but it didn't fix the warnings. Sorry, I misunderstood this issue. Anil
Re: [PATCH] arm: dts: omap4-sdp: Add I2c pinctrl data
Hi Sourav, On Mon, 2013-01-28 at 16:47 +0530, Sourav Poddar wrote: Booting 3.8-rc4 om omap 4430sdp results in the following error omap_i2c 4807.i2c: did not get pins for i2c error: -19 [1.024261] omap_i2c 4807.i2c: bus 0 rev0.12 at 100 kHz [1.030181] omap_i2c 48072000.i2c: did not get pins for i2c error: -19 [1.037384] omap_i2c 48072000.i2c: bus 1 rev0.12 at 400 kHz [1.043762] omap_i2c 4806.i2c: did not get pins for i2c error: -19 [1.050964] omap_i2c 4806.i2c: bus 2 rev0.12 at 100 kHz [1.056823] omap_i2c 4807a000.i2c: did not get pins for i2c error: -19 [1.064025] omap_i2c 4807a000.i2c: bus 3 rev0.12 at 400 kHz This happens because omap4 dts file is not adapted to use i2c through pinctrl framework. Populating i2c pinctrl data to get rid of the error. Tested on omap4430 sdp with 3.8-rc4 kernel. Signed-off-by: Sourav Poddar sourav.pod...@ti.com Reported-by: Santosh Shilimkar santosh.shilim...@ti.com --- Could you do the same thing for panda? I'm getting the same kind of errors with it: [0.00] Machine: Generic OMAP4 (Flattened Device Tree), model: TI OMAP4 PandaBoard [...] [2.884826] omap_i2c 48072000.i2c: did not get pins for i2c error: -19 [2.890686] omap_i2c 48072000.i2c: bus 1 rev0.11 at 400 kHz [2.892028] omap_i2c 4806.i2c: did not get pins for i2c error: -19 [2.899047] omap_i2c 4806.i2c: bus 2 rev0.11 at 100 kHz [2.906677] omap_i2c 4835.i2c: did not get pins for i2c error: -19 [2.912872] omap_i2c 4835.i2c: bus 3 rev0.11 at 400 kHz -- Cheers, Luca. -- To unsubscribe from this list: send the line unsubscribe linux-omap in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: [PATCH] arm: dts: omap4-sdp: Add I2c pinctrl data
Hi Luciano, On Wednesday 30 January 2013 11:55 AM, Luciano Coelho wrote: Hi Sourav, On Mon, 2013-01-28 at 16:47 +0530, Sourav Poddar wrote: Booting 3.8-rc4 om omap 4430sdp results in the following error omap_i2c 4807.i2c: did not get pins for i2c error: -19 [1.024261] omap_i2c 4807.i2c: bus 0 rev0.12 at 100 kHz [1.030181] omap_i2c 48072000.i2c: did not get pins for i2c error: -19 [1.037384] omap_i2c 48072000.i2c: bus 1 rev0.12 at 400 kHz [1.043762] omap_i2c 4806.i2c: did not get pins for i2c error: -19 [1.050964] omap_i2c 4806.i2c: bus 2 rev0.12 at 100 kHz [1.056823] omap_i2c 4807a000.i2c: did not get pins for i2c error: -19 [1.064025] omap_i2c 4807a000.i2c: bus 3 rev0.12 at 400 kHz This happens because omap4 dts file is not adapted to use i2c through pinctrl framework. Populating i2c pinctrl data to get rid of the error. Tested on omap4430 sdp with 3.8-rc4 kernel. Signed-off-by: Sourav Poddar sourav.pod...@ti.com Reported-by: Santosh Shilimkar santosh.shilim...@ti.com --- Could you do the same thing for panda? I'm getting the same kind of errors with it: Sure, I will do that. [0.00] Machine: Generic OMAP4 (Flattened Device Tree), model: TI OMAP4 PandaBoard [...] [2.884826] omap_i2c 48072000.i2c: did not get pins for i2c error: -19 [2.890686] omap_i2c 48072000.i2c: bus 1 rev0.11 at 400 kHz [2.892028] omap_i2c 4806.i2c: did not get pins for i2c error: -19 [2.899047] omap_i2c 4806.i2c: bus 2 rev0.11 at 100 kHz [2.906677] omap_i2c 4835.i2c: did not get pins for i2c error: -19 [2.912872] omap_i2c 4835.i2c: bus 3 rev0.11 at 400 kHz -- Cheers, Luca. Thanks, Sourav -- To unsubscribe from this list: send the line unsubscribe linux-omap in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
[PATCH] arm: dts: omap4-sdp: Add I2c pinctrl data
Booting 3.8-rc4 om omap 4430sdp results in the following error
omap_i2c 4807.i2c: did not get pins for i2c error: -19
[1.024261] omap_i2c 4807.i2c: bus 0 rev0.12 at 100 kHz
[1.030181] omap_i2c 48072000.i2c: did not get pins for i2c error: -19
[1.037384] omap_i2c 48072000.i2c: bus 1 rev0.12 at 400 kHz
[1.043762] omap_i2c 4806.i2c: did not get pins for i2c error: -19
[1.050964] omap_i2c 4806.i2c: bus 2 rev0.12 at 100 kHz
[1.056823] omap_i2c 4807a000.i2c: did not get pins for i2c error: -19
[1.064025] omap_i2c 4807a000.i2c: bus 3 rev0.12 at 400 kHz
This happens because omap4 dts file is not adapted to use i2c through pinctrl
framework. Populating i2c pinctrl data to get rid of the error.
Tested on omap4430 sdp with 3.8-rc4 kernel.
Signed-off-by: Sourav Poddar sourav.pod...@ti.com
Reported-by: Santosh Shilimkar santosh.shilim...@ti.com
---
arch/arm/boot/dts/omap4-sdp.dts | 40 +++
1 files changed, 40 insertions(+), 0 deletions(-)
diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts
index 43e5258..40a04c9 100644
--- a/arch/arm/boot/dts/omap4-sdp.dts
+++ b/arch/arm/boot/dts/omap4-sdp.dts
@@ -212,9 +212,40 @@
0x58 0x10b /* hdmi_hpd.gpio_63 INPUT PULLDOWN |
MODE3 */
;
};
+
+ i2c1_pins: pinmux_i2c1_pins {
+ pinctrl-single,pins =
+ 0xe2 0x118/* i2c1_scl PULLUP | INPUTENABLE |
MODE0 */
+ 0xe4 0x118 /* i2c1_sda PULLUP | INPUTENABLE |
MODE0 */
+ ;
+ };
+
+ i2c2_pins: pinmux_i2c2_pins {
+ pinctrl-single,pins =
+0xe6 0x118/* i2c2_scl PULLUP | INPUTENABLE |
MODE0 */
+0xe8 0x118/* i2c2_sda PULLUP | INPUTENABLE |
MODE0 */
+ ;
+ };
+
+ i2c3_pins: pinmux_i2c3_pins {
+ pinctrl-single,pins =
+ 0xea 0x118/* i2c3_scl PULLUP | INPUTENABLE |
MODE0 */
+ 0xec 0x118 /* i2c3_sda PULLUP | INPUTENABLE | MODE0
*/
+ ;
+ };
+
+ i2c4_pins: pinmux_i2c4_pins {
+ pinctrl-single,pins =
+ 0xee 0x118/* i2c4_scl PULLUP | INPUTENABLE |
MODE0 */
+ 0xf0 0x118 /* i2c4_sda PULLUP | INPUTENABLE | MODE0
*/
+ ;
+ };
};
i2c1 {
+ pinctrl-names = default;
+ pinctrl-0 = i2c1_pins;
+
clock-frequency = 40;
twl: twl@48 {
@@ -253,10 +284,16 @@
/include/ twl6030.dtsi
i2c2 {
+ pinctrl-names = default;
+ pinctrl-0 = i2c2_pins;
+
clock-frequency = 40;
};
i2c3 {
+ pinctrl-names = default;
+ pinctrl-0 = i2c3_pins;
+
clock-frequency = 40;
/*
@@ -279,6 +316,9 @@
};
i2c4 {
+ pinctrl-names = default;
+ pinctrl-0 = i2c4_pins;
+
clock-frequency = 40;
/*
--
1.7.1
--
To unsubscribe from this list: send the line unsubscribe linux-omap in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
