Add HS USB Host support along with USB PHYs and power supply regulators

Signed-off-by: Dmitry Lifshitz <lifsh...@compulab.co.il>
---
 arch/arm/boot/dts/omap3-cm-t3x.dtsi   |   38 +++++++++++++++++++++++++++++++++
 arch/arm/boot/dts/omap3-cm-t3x30.dtsi |    8 +++++++
 2 files changed, 46 insertions(+), 0 deletions(-)

diff --git a/arch/arm/boot/dts/omap3-cm-t3x.dtsi 
b/arch/arm/boot/dts/omap3-cm-t3x.dtsi
index abda493..c671a22 100644
--- a/arch/arm/boot/dts/omap3-cm-t3x.dtsi
+++ b/arch/arm/boot/dts/omap3-cm-t3x.dtsi
@@ -19,6 +19,36 @@
                        linux,default-trigger = "heartbeat";
                };
        };
+
+       /* HS USB Port 1 Power */
+       hsusb1_power: hsusb1_power_reg {
+               compatible = "regulator-fixed";
+               regulator-name = "hsusb1_vbus";
+               regulator-min-microvolt = <3300000>;
+               regulator-max-microvolt = <3300000>;
+               startup-delay-us = <70000>;
+       };
+
+       /* HS USB Port 2 Power */
+       hsusb2_power: hsusb2_power_reg {
+               compatible = "regulator-fixed";
+               regulator-name = "hsusb2_vbus";
+               regulator-min-microvolt = <3300000>;
+               regulator-max-microvolt = <3300000>;
+               startup-delay-us = <70000>;
+       };
+
+       /* HS USB Host PHY on PORT 1 */
+       hsusb1_phy: hsusb1_phy {
+               compatible = "usb-nop-xceiv";
+               vcc-supply = <&hsusb1_power>;
+       };
+
+       /* HS USB Host PHY on PORT 2 */
+       hsusb2_phy: hsusb2_phy {
+               compatible = "usb-nop-xceiv";
+               vcc-supply = <&hsusb2_power>;
+       };
 };
 
 &omap3_pmx_core {
@@ -70,3 +100,11 @@
 &i2c3 {
        clock-frequency = <400000>;
 };
+&usbhshost {
+       port1-mode = "ehci-phy";
+       port2-mode = "ehci-phy";
+};
+
+&usbhsehci {
+       phys = <&hsusb1_phy &hsusb2_phy>;
+};
diff --git a/arch/arm/boot/dts/omap3-cm-t3x30.dtsi 
b/arch/arm/boot/dts/omap3-cm-t3x30.dtsi
index a56d082..cb43929 100644
--- a/arch/arm/boot/dts/omap3-cm-t3x30.dtsi
+++ b/arch/arm/boot/dts/omap3-cm-t3x30.dtsi
@@ -93,3 +93,11 @@
        /* pullups: BIT(0) */
        ti,pullups = <0x000001>;
 };
+
+&hsusb1_phy {
+       reset-gpios = <&twl_gpio 6 GPIO_ACTIVE_LOW>;
+};
+
+&hsusb2_phy {
+       reset-gpios = <&twl_gpio 7 GPIO_ACTIVE_LOW>;
+};
-- 
1.7.5.4

--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to