Re: [PATCH 1/7] ARM: OMAP2+: Remove unused ti81xx platform init code
* Matthijs van Duin matthijsvand...@gmail.com [150118 12:35]: --- a/arch/arm/mach-omap2/usb-musb.c +++ b/arch/arm/mach-omap2/usb-musb.c @@ -82,16 +82,8 @@ void __init usb_musb_init(struct omap_musb_board_data *musb_board_data) musb_plat.mode = board_data-mode; musb_plat.extvbus = board_data-extvbus; - if (soc_is_am35xx()) { Was it intentional that this patch also removed a test for am35xx (rather than am335x) ? Oops that was not intentional. However, with the pending patches to make am3517 dt only, this won't hurt anything as the only legacy platform then left are omap3430 to omap3730 which us the default musb-omap2430. Regards, Tony -- To unsubscribe from this list: send the line unsubscribe linux-omap in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: [PATCH 1/7] ARM: OMAP2+: Remove unused ti81xx platform init code
--- a/arch/arm/mach-omap2/usb-musb.c +++ b/arch/arm/mach-omap2/usb-musb.c @@ -82,16 +82,8 @@ void __init usb_musb_init(struct omap_musb_board_data *musb_board_data) musb_plat.mode = board_data-mode; musb_plat.extvbus = board_data-extvbus; - if (soc_is_am35xx()) { Was it intentional that this patch also removed a test for am35xx (rather than am335x) ? -- To unsubscribe from this list: send the line unsubscribe linux-omap in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: [PATCH 1/7] ARM: OMAP2+: Remove unused ti81xx platform init code
* Felipe Balbi ba...@ti.com [150113 17:23]: On Tue, Jan 13, 2015 at 03:13:51PM -0800, Tony Lindgren wrote: The support for 81xx was never working in mainline, and it will be only supported in device tree mode. Let's remove all the remaining 81xx related platform code. you should probably also mention here that you're dropping unnecessary non-DT AM33xx support since that has never booted on legacy mode. Other than that Reviewed-by: Felipe Balbi ba...@ti.com Thanks, the 81xx legacy booting support already got removed, these are just left overs I noticed. I've updated the description with the following: The support for 81xx was never working in mainline, and the broken legacy booting support has been removed. There are patches coming to make 81xx boot with device tree, and for that we won't need any of this legacy platform code, so let's just remove it. Regards, Tony -- To unsubscribe from this list: send the line unsubscribe linux-omap in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: [PATCH 1/7] ARM: OMAP2+: Remove unused ti81xx platform init code
On Tue, Jan 13, 2015 at 03:13:51PM -0800, Tony Lindgren wrote: The support for 81xx was never working in mainline, and it will be only supported in device tree mode. Let's remove all the remaining 81xx related platform code. you should probably also mention here that you're dropping unnecessary non-DT AM33xx support since that has never booted on legacy mode. Other than that Reviewed-by: Felipe Balbi ba...@ti.com Cc: Brian Hutchinson b.hutch...@gmail.com Signed-off-by: Tony Lindgren t...@atomide.com --- arch/arm/mach-omap2/cclock3xxx_data.c | 6 +- arch/arm/mach-omap2/omap_phy_internal.c | 35 - arch/arm/mach-omap2/usb-musb.c | 12 ++- arch/arm/mach-omap2/usb.h | 2 -- 4 files changed, 3 insertions(+), 52 deletions(-) diff --git a/arch/arm/mach-omap2/cclock3xxx_data.c b/arch/arm/mach-omap2/cclock3xxx_data.c index 644ff32..e79c80b 100644 --- a/arch/arm/mach-omap2/cclock3xxx_data.c +++ b/arch/arm/mach-omap2/cclock3xxx_data.c @@ -3634,10 +3634,6 @@ int __init omap3xxx_clk_init(void) omap_clocks_register(omap36xx_am35xx_omap3430es2plus_clks, ARRAY_SIZE(omap36xx_am35xx_omap3430es2plus_clks)); omap_clocks_register(omap3xxx_clks, ARRAY_SIZE(omap3xxx_clks)); - } else if (soc_is_am33xx()) { - cpu_mask = RATE_IN_AM33XX; - } else if (cpu_is_ti814x()) { - cpu_mask = RATE_IN_TI814X; } else if (cpu_is_omap34xx()) { if (omap_rev() == OMAP3430_REV_ES1_0) { cpu_mask = RATE_IN_3430ES1; @@ -3681,7 +3677,7 @@ int __init omap3xxx_clk_init(void) * Lock DPLL5 -- here only until other device init code can * handle this */ - if (!cpu_is_ti81xx() (omap_rev() = OMAP3430_REV_ES2_0)) + if (omap_rev() = OMAP3430_REV_ES2_0) omap3_clk_lock_dpll5(); /* Avoid sleeping during omap3_core_dpll_m2_set_rate() */ diff --git a/arch/arm/mach-omap2/omap_phy_internal.c b/arch/arm/mach-omap2/omap_phy_internal.c index 1a19fa0..8e90356 100644 --- a/arch/arm/mach-omap2/omap_phy_internal.c +++ b/arch/arm/mach-omap2/omap_phy_internal.c @@ -152,38 +152,3 @@ void am35x_set_mode(u8 musb_mode) omap_ctrl_writel(devconf2, AM35XX_CONTROL_DEVCONF2); } - -void ti81xx_musb_phy_power(u8 on) -{ - void __iomem *scm_base = NULL; - u32 usbphycfg; - - scm_base = ioremap(TI81XX_SCM_BASE, SZ_2K); - if (!scm_base) { - pr_err(system control module ioremap failed\n); - return; - } - - usbphycfg = readl_relaxed(scm_base + USBCTRL0); - - if (on) { - if (cpu_is_ti816x()) { - usbphycfg |= TI816X_USBPHY0_NORMAL_MODE; - usbphycfg = ~TI816X_USBPHY_REFCLK_OSC; - } else if (cpu_is_ti814x()) { - usbphycfg = ~(USBPHY_CM_PWRDN | USBPHY_OTG_PWRDN - | USBPHY_DPINPUT | USBPHY_DMINPUT); - usbphycfg |= (USBPHY_OTGVDET_EN | USBPHY_OTGSESSEND_EN - | USBPHY_DPOPBUFCTL | USBPHY_DMOPBUFCTL); - } - } else { - if (cpu_is_ti816x()) - usbphycfg = ~TI816X_USBPHY0_NORMAL_MODE; - else if (cpu_is_ti814x()) - usbphycfg |= USBPHY_CM_PWRDN | USBPHY_OTG_PWRDN; - - } - writel_relaxed(usbphycfg, scm_base + USBCTRL0); - - iounmap(scm_base); -} diff --git a/arch/arm/mach-omap2/usb-musb.c b/arch/arm/mach-omap2/usb-musb.c index bc89723..e4562b2 100644 --- a/arch/arm/mach-omap2/usb-musb.c +++ b/arch/arm/mach-omap2/usb-musb.c @@ -82,16 +82,8 @@ void __init usb_musb_init(struct omap_musb_board_data *musb_board_data) musb_plat.mode = board_data-mode; musb_plat.extvbus = board_data-extvbus; - if (soc_is_am35xx()) { - oh_name = am35x_otg_hs; - name = musb-am35x; - } else if (cpu_is_ti81xx()) { - oh_name = usb_otg_hs; - name = musb-ti81xx; - } else { - oh_name = usb_otg_hs; - name = musb-omap2430; - } + oh_name = usb_otg_hs; + name = musb-omap2430; oh = omap_hwmod_lookup(oh_name); if (WARN(!oh, %s: could not find omap_hwmod for %s\n, diff --git a/arch/arm/mach-omap2/usb.h b/arch/arm/mach-omap2/usb.h index 4ba2ae7..3395365 100644 --- a/arch/arm/mach-omap2/usb.h +++ b/arch/arm/mach-omap2/usb.h @@ -68,5 +68,3 @@ extern void am35x_musb_reset(void); extern void am35x_musb_phy_power(u8 on); extern void am35x_musb_clear_irq(void); extern void am35x_set_mode(u8 musb_mode); -extern void ti81xx_musb_phy_power(u8 on); - -- 2.1.4 -- To unsubscribe from this list: send the line unsubscribe linux-omap in the body of a message to majord...@vger.kernel.org More majordomo info at
[PATCH 1/7] ARM: OMAP2+: Remove unused ti81xx platform init code
The support for 81xx was never working in mainline, and it will be only supported in device tree mode. Let's remove all the remaining 81xx related platform code. Cc: Brian Hutchinson b.hutch...@gmail.com Signed-off-by: Tony Lindgren t...@atomide.com --- arch/arm/mach-omap2/cclock3xxx_data.c | 6 +- arch/arm/mach-omap2/omap_phy_internal.c | 35 - arch/arm/mach-omap2/usb-musb.c | 12 ++- arch/arm/mach-omap2/usb.h | 2 -- 4 files changed, 3 insertions(+), 52 deletions(-) diff --git a/arch/arm/mach-omap2/cclock3xxx_data.c b/arch/arm/mach-omap2/cclock3xxx_data.c index 644ff32..e79c80b 100644 --- a/arch/arm/mach-omap2/cclock3xxx_data.c +++ b/arch/arm/mach-omap2/cclock3xxx_data.c @@ -3634,10 +3634,6 @@ int __init omap3xxx_clk_init(void) omap_clocks_register(omap36xx_am35xx_omap3430es2plus_clks, ARRAY_SIZE(omap36xx_am35xx_omap3430es2plus_clks)); omap_clocks_register(omap3xxx_clks, ARRAY_SIZE(omap3xxx_clks)); - } else if (soc_is_am33xx()) { - cpu_mask = RATE_IN_AM33XX; - } else if (cpu_is_ti814x()) { - cpu_mask = RATE_IN_TI814X; } else if (cpu_is_omap34xx()) { if (omap_rev() == OMAP3430_REV_ES1_0) { cpu_mask = RATE_IN_3430ES1; @@ -3681,7 +3677,7 @@ int __init omap3xxx_clk_init(void) * Lock DPLL5 -- here only until other device init code can * handle this */ - if (!cpu_is_ti81xx() (omap_rev() = OMAP3430_REV_ES2_0)) + if (omap_rev() = OMAP3430_REV_ES2_0) omap3_clk_lock_dpll5(); /* Avoid sleeping during omap3_core_dpll_m2_set_rate() */ diff --git a/arch/arm/mach-omap2/omap_phy_internal.c b/arch/arm/mach-omap2/omap_phy_internal.c index 1a19fa0..8e90356 100644 --- a/arch/arm/mach-omap2/omap_phy_internal.c +++ b/arch/arm/mach-omap2/omap_phy_internal.c @@ -152,38 +152,3 @@ void am35x_set_mode(u8 musb_mode) omap_ctrl_writel(devconf2, AM35XX_CONTROL_DEVCONF2); } - -void ti81xx_musb_phy_power(u8 on) -{ - void __iomem *scm_base = NULL; - u32 usbphycfg; - - scm_base = ioremap(TI81XX_SCM_BASE, SZ_2K); - if (!scm_base) { - pr_err(system control module ioremap failed\n); - return; - } - - usbphycfg = readl_relaxed(scm_base + USBCTRL0); - - if (on) { - if (cpu_is_ti816x()) { - usbphycfg |= TI816X_USBPHY0_NORMAL_MODE; - usbphycfg = ~TI816X_USBPHY_REFCLK_OSC; - } else if (cpu_is_ti814x()) { - usbphycfg = ~(USBPHY_CM_PWRDN | USBPHY_OTG_PWRDN - | USBPHY_DPINPUT | USBPHY_DMINPUT); - usbphycfg |= (USBPHY_OTGVDET_EN | USBPHY_OTGSESSEND_EN - | USBPHY_DPOPBUFCTL | USBPHY_DMOPBUFCTL); - } - } else { - if (cpu_is_ti816x()) - usbphycfg = ~TI816X_USBPHY0_NORMAL_MODE; - else if (cpu_is_ti814x()) - usbphycfg |= USBPHY_CM_PWRDN | USBPHY_OTG_PWRDN; - - } - writel_relaxed(usbphycfg, scm_base + USBCTRL0); - - iounmap(scm_base); -} diff --git a/arch/arm/mach-omap2/usb-musb.c b/arch/arm/mach-omap2/usb-musb.c index bc89723..e4562b2 100644 --- a/arch/arm/mach-omap2/usb-musb.c +++ b/arch/arm/mach-omap2/usb-musb.c @@ -82,16 +82,8 @@ void __init usb_musb_init(struct omap_musb_board_data *musb_board_data) musb_plat.mode = board_data-mode; musb_plat.extvbus = board_data-extvbus; - if (soc_is_am35xx()) { - oh_name = am35x_otg_hs; - name = musb-am35x; - } else if (cpu_is_ti81xx()) { - oh_name = usb_otg_hs; - name = musb-ti81xx; - } else { - oh_name = usb_otg_hs; - name = musb-omap2430; - } + oh_name = usb_otg_hs; + name = musb-omap2430; oh = omap_hwmod_lookup(oh_name); if (WARN(!oh, %s: could not find omap_hwmod for %s\n, diff --git a/arch/arm/mach-omap2/usb.h b/arch/arm/mach-omap2/usb.h index 4ba2ae7..3395365 100644 --- a/arch/arm/mach-omap2/usb.h +++ b/arch/arm/mach-omap2/usb.h @@ -68,5 +68,3 @@ extern void am35x_musb_reset(void); extern void am35x_musb_phy_power(u8 on); extern void am35x_musb_clear_irq(void); extern void am35x_set_mode(u8 musb_mode); -extern void ti81xx_musb_phy_power(u8 on); - -- 2.1.4 -- To unsubscribe from this list: send the line unsubscribe linux-omap in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html