The sharp-ls panel driver now manages the gpios required to configure the panel.
This was previously done in omap_dss_device's platform_enable/disable callbacks
defined in board files using this panel.
All the board files using this panel now pass the gpio information as platform
data via the panel_sharp_ls037v7dw01_data struct, which is needed by the panel
driver to configure the gpios connected to the panel. Hence, the
platform_enable/disable ops can be safely removed now.
Signed-off-by: Archit Taneja <arc...@ti.com>
---
.../video/omap2/displays/panel-sharp-ls037v7dw01.c | 11 -----------
1 file changed, 11 deletions(-)
diff --git a/drivers/video/omap2/displays/panel-sharp-ls037v7dw01.c
b/drivers/video/omap2/displays/panel-sharp-ls037v7dw01.c
index e6d9c9b..74cb0eb 100644
--- a/drivers/video/omap2/displays/panel-sharp-ls037v7dw01.c
+++ b/drivers/video/omap2/displays/panel-sharp-ls037v7dw01.c
@@ -125,12 +125,6 @@ static int sharp_ls_power_on(struct omap_dss_device
*dssdev)
/* wait couple of vsyncs until enabling the LCD */
msleep(50);
- if (dssdev->platform_enable) {
- r = dssdev->platform_enable(dssdev);
- if (r)
- goto err1;
- }
-
if (gpio_is_valid(pd->resb_gpio))
gpio_set_value_cansleep(pd->resb_gpio, 1);
@@ -138,8 +132,6 @@ static int sharp_ls_power_on(struct omap_dss_device *dssdev)
gpio_set_value_cansleep(pd->ini_gpio, 1);
return 0;
-err1:
- omapdss_dpi_display_disable(dssdev);
err0:
return r;
}
@@ -157,9 +149,6 @@ static void sharp_ls_power_off(struct omap_dss_device
*dssdev)
if (gpio_is_valid(pd->resb_gpio))
gpio_set_value_cansleep(pd->resb_gpio, 0);
- if (dssdev->platform_disable)
- dssdev->platform_disable(dssdev);
-
/* wait at least 5 vsyncs after disabling the LCD */
msleep(100);
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
