Hi
On Wed, 22 Aug 2012, Omar Ramirez Luna wrote:
> For a reset sequence to complete cleanly, a module needs its
> associated clocks to be enabled, otherwise the timeout check
> in prcm code can print a false failure (failed to hardreset)
> that occurs because the clocks aren't powered ON and the
Hi Benoit,
On 6 September 2012 10:12, Benoit Cousson wrote:
> The sequence is good, I'm just a little bit concern about the
> duplication of code compared to _enable sequence.
>
> That being said, this is the consequence of removing the hardreset
> sequence outside of the main _enable/_shutdown s
Hi Omar,
On 08/22/2012 07:42 AM, Omar Ramirez Luna wrote:
> For a reset sequence to complete cleanly, a module needs its
> associated clocks to be enabled, otherwise the timeout check
> in prcm code can print a false failure (failed to hardreset)
> that occurs because the clocks aren't powered ON
For a reset sequence to complete cleanly, a module needs its
associated clocks to be enabled, otherwise the timeout check
in prcm code can print a false failure (failed to hardreset)
that occurs because the clocks aren't powered ON and the status
bit checked can't transition without them.
Signed-o