Use the AM33XX pinmux IOPAD macro to define the physical address instead
of the offset from the padconf address. It makes the DTS easier to read
since matches the addresses listed in the Technical Reference Manual.
Signed-off-by: Javier Martinez Canillas <jav...@osg.samsung.com>
---
arch/arm/boot/dts/am335x-base0033.dts | 48 +++++++++++++++++------------------
1 file changed, 24 insertions(+), 24 deletions(-)
diff --git a/arch/arm/boot/dts/am335x-base0033.dts
b/arch/arm/boot/dts/am335x-base0033.dts
index 72a9b3fc4251..58a05f7d0b7c 100644
--- a/arch/arm/boot/dts/am335x-base0033.dts
+++ b/arch/arm/boot/dts/am335x-base0033.dts
@@ -46,39 +46,39 @@
&am33xx_pinmux {
nxp_hdmi_pins: pinmux_nxp_hdmi_pins {
pinctrl-single,pins = <
- 0x1b0 (PIN_OUTPUT | MUX_MODE3) /*
xdma_event_intr0.clkout1 */
- 0xa0 (PIN_OUTPUT | MUX_MODE0) /* lcd_data0 */
- 0xa4 (PIN_OUTPUT | MUX_MODE0) /* lcd_data1 */
- 0xa8 (PIN_OUTPUT | MUX_MODE0) /* lcd_data2 */
- 0xac (PIN_OUTPUT | MUX_MODE0) /* lcd_data3 */
- 0xb0 (PIN_OUTPUT | MUX_MODE0) /* lcd_data4 */
- 0xb4 (PIN_OUTPUT | MUX_MODE0) /* lcd_data5 */
- 0xb8 (PIN_OUTPUT | MUX_MODE0) /* lcd_data6 */
- 0xbc (PIN_OUTPUT | MUX_MODE0) /* lcd_data7 */
- 0xc0 (PIN_OUTPUT | MUX_MODE0) /* lcd_data8 */
- 0xc4 (PIN_OUTPUT | MUX_MODE0) /* lcd_data9 */
- 0xc8 (PIN_OUTPUT | MUX_MODE0) /* lcd_data10 */
- 0xcc (PIN_OUTPUT | MUX_MODE0) /* lcd_data11 */
- 0xd0 (PIN_OUTPUT | MUX_MODE0) /* lcd_data12 */
- 0xd4 (PIN_OUTPUT | MUX_MODE0) /* lcd_data13 */
- 0xd8 (PIN_OUTPUT | MUX_MODE0) /* lcd_data14 */
- 0xdc (PIN_OUTPUT | MUX_MODE0) /* lcd_data15 */
- 0xe0 (PIN_OUTPUT | MUX_MODE0) /* lcd_vsync */
- 0xe4 (PIN_OUTPUT | MUX_MODE0) /* lcd_hsync */
- 0xe8 (PIN_OUTPUT | MUX_MODE0) /* lcd_pclk */
- 0xec (PIN_OUTPUT | MUX_MODE0) /* lcd_ac_bias_en */
+ AM33XX_IOPAD(0x9b0, PIN_OUTPUT | MUX_MODE3) /*
xdma_event_intr0.clkout1 */
+ AM33XX_IOPAD(0x8a0, PIN_OUTPUT | MUX_MODE0) /*
lcd_data0 */
+ AM33XX_IOPAD(0x8a4, PIN_OUTPUT | MUX_MODE0) /*
lcd_data1 */
+ AM33XX_IOPAD(0x8a8, PIN_OUTPUT | MUX_MODE0) /*
lcd_data2 */
+ AM33XX_IOPAD(0x8ac, PIN_OUTPUT | MUX_MODE0) /*
lcd_data3 */
+ AM33XX_IOPAD(0x8b0, PIN_OUTPUT | MUX_MODE0) /*
lcd_data4 */
+ AM33XX_IOPAD(0x8b4, PIN_OUTPUT | MUX_MODE0) /*
lcd_data5 */
+ AM33XX_IOPAD(0x8b8, PIN_OUTPUT | MUX_MODE0) /*
lcd_data6 */
+ AM33XX_IOPAD(0x8bc, PIN_OUTPUT | MUX_MODE0) /*
lcd_data7 */
+ AM33XX_IOPAD(0x8c0, PIN_OUTPUT | MUX_MODE0) /*
lcd_data8 */
+ AM33XX_IOPAD(0x8c4, PIN_OUTPUT | MUX_MODE0) /*
lcd_data9 */
+ AM33XX_IOPAD(0x8c8, PIN_OUTPUT | MUX_MODE0) /*
lcd_data10 */
+ AM33XX_IOPAD(0x8cc, PIN_OUTPUT | MUX_MODE0) /*
lcd_data11 */
+ AM33XX_IOPAD(0x8d0, PIN_OUTPUT | MUX_MODE0) /*
lcd_data12 */
+ AM33XX_IOPAD(0x8d4, PIN_OUTPUT | MUX_MODE0) /*
lcd_data13 */
+ AM33XX_IOPAD(0x8d8, PIN_OUTPUT | MUX_MODE0) /*
lcd_data14 */
+ AM33XX_IOPAD(0x8dc, PIN_OUTPUT | MUX_MODE0) /*
lcd_data15 */
+ AM33XX_IOPAD(0x8e0, PIN_OUTPUT | MUX_MODE0) /*
lcd_vsync */
+ AM33XX_IOPAD(0x8e4, PIN_OUTPUT | MUX_MODE0) /*
lcd_hsync */
+ AM33XX_IOPAD(0x8e8, PIN_OUTPUT | MUX_MODE0) /*
lcd_pclk */
+ AM33XX_IOPAD(0x8ec, PIN_OUTPUT | MUX_MODE0) /*
lcd_ac_bias_en */
>;
};
nxp_hdmi_off_pins: pinmux_nxp_hdmi_off_pins {
pinctrl-single,pins = <
- 0x1b0 (PIN_OUTPUT | MUX_MODE3) /*
xdma_event_intr0.clkout1 */
+ AM33XX_IOPAD(0x9b0, PIN_OUTPUT | MUX_MODE3) /*
xdma_event_intr0.clkout1 */
>;
};
leds_base_pins: pinmux_leds_base_pins {
pinctrl-single,pins = <
- 0x54 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /*
gpmc_a5.gpio1_21 */
- 0x88 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /*
gpmc_csn3.gpio2_0 */
+ AM33XX_IOPAD(0x854, PIN_OUTPUT_PULLDOWN | MUX_MODE7)
/* gpmc_a5.gpio1_21 */
+ AM33XX_IOPAD(0x888, PIN_OUTPUT_PULLDOWN | MUX_MODE7)
/* gpmc_csn3.gpio2_0 */
>;
};
};
--
2.4.3
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
