This is version three of the patch set. Unless something serious comes up
I would drop the RFC on the next post.
So far I should have everything covered up comparing to the omap-serial
driver except for the throttle callbacks. And now I would slowly start
looking into DMA support…
Sebastian
--
T
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
When an OMAP GPIO is used as an IRQ line, a call to gpio_request()
has to be made to initialize the OMAP GPIO bank before a driver
request the IRQ. Otherwise the call to request_irq() fails.
Drivers should not be aware of this neither care wether an IRQ line
is a GPIO or not. They should just requ
Loan Syndicacion
Am AFG Guaranty Trust Bank, zu strukturieren wir Kreditlinien treffen Sie
unsere
Kunden spezifischen geschäftlichen Anforderungen und einen deutlichen
Mehrwert für unsere
Kunden Unternehmen.
eine Division der AFG Finance und Private Bank plc.
Wenn Sie erwägen, eine große Akqui
binMk5ShfA205.bin
Description: iso-8859-1
binz8t4k_0ZSO.bin
Description: iso-8859-1
binZdJucJYmRx.bin
Description: iso-8859-1
Hi,
It is good idea add this feature.
1: Can we let the "ret = hwspin_lock_tests(ops, hwlock);" add after
hwspin_lock_register_single have return
succeed, that can avoid test duplicated Or error lockid. Of course, If
this interface is intend to test soc hardware capability only, we can
put it
>From 8b0f9153d078b7182efd604ef8525d50899ce1a3 Mon Sep 17 00:00:00 2001
From: Ricardo Neri
Date: Mon, 30 Jul 2012 17:54:59 -0500
Subject: [PATCH v3] OMAPDSS: DISPC: Improvements to DIGIT sync signal selection
DSS code wrongly assumes that VENC is always available as source for the
external
sync
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hi Tony
The following changes since commit 485802a6c524e62b5924849dd727ddbb1497cc71:
Linux 3.5-rc3 (2012-06-16 17:25:17 -0700)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/pjw/omap-pending.git
tags/omap
Following 2 hwmod strcuture are added:
UHH hwmod of usbhs with uhh base address and
EHCI , OHCI irq and base addresses.
TLL hwmod of usbhs with the TLL base address and irq.
Signed-off-by: Keshava Munegowda
---
arch/arm/mach-omap2/omap_hwmod_3xxx_data.c | 184
arch/
Subscribe
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Moved all the board specific internal PHY functions out of usb_musb.c file
as this file is shared between the OMAP2+ and AM35xx platforms.
There exists a file which has the functions specific to internal PHY
used for OMAP4 platform. Moved all phy specific functions to this file
and passing these fu
From: Hema HK
Index: linux-2.6/arch/arm/mach-omap2/board-am3517evm.c
===
--- linux-2.6.orig/arch/arm/mach-omap2/board-am3517evm.c
+++ linux-2.6/arch/arm/mach-omap2/board-am3517evm.c
@@ -409,6 +409,10 @@ static struct omap_musb_board_
unsubscribe linux-omap
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
unsubscribe linux-omap--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
subscribe linux-omap
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
I have a urgent message to share with you get back to me for details...
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
subscribe linux-omap
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
unsubscribe linux-omap ming.c...@authentec.com
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Subject: [PATCH] MFD: TWL4030: changes for TRITON glitch fix.
Fix for TWL5030 Silicon Errata 27 & 28:
27 - VDD1, VDD2, may have glitches when their output value is updated.
28 - VDD1 and / or VDD2 DCDC clock may stop working when internal clock
is switched from internal to external.
Workaround re
Subject: [PATCH/RFC] OMAP2: serial.c: Fix number of uarts in early_init
The omap_serial_early_init prints the following errors:
Could not get uart4_ick
Could not get uart4_fck
because all the uarts available in omap_uart[] will be initialized.
Only omap4430 and omap3630 have 4 uarts at the momen
This patch disables the newly introduced internal pull-up feature in
OMAP3630, to use only the external HW resitor >= 470 Ohm for the
assured functionality in HS mode.
While testing the I2C in High Speed mode, it was discovered that
without a proper pull-up resitor, there is data corruption during
Bcc:
Subject: GPIO chip select support in omap2_mcspi driver
Hey,
Recently I have been looking to use a BeagleBoard to drive several
serial ADCs and DACs in a data acquisition and analysis setup. Unfortunately,
the
BeagleBoard is severely limited by the number of SPI controllers it
exposes on t
unsubscribe linux-omap
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
From: Vimal Singh
Adding NAND support for ZOOM2 and LDP board. I have tested it for ZOOM2
boards, someone can verify it for LDP, hopefully it should not have any
problem.
The size of the U-Boot environment partition was increased to 1.25MB.
Vikram: Changed ldp name to zoom.
Future board
From: Syed Rafiuddin
This patch Adds Keypad support on OMAP4.And adds
OMAP4 register addresses and configures them for OMAP4.
This patch has been updated as per the comments received from
Trilok Soni to remove GPIO based omap2 keypad logic from omap_keypad.c
(http://www.mail-archive.com/linux-o
On 7/30/09, Felipe Balbi wrote:
> On Thu, Jul 30, 2009 at 01:30:44PM +0200, ext Tar Gz wrote:
>> hello everybody
>>
>> i'm student from indonesia..i'm sorry if my english too bad
>>
>> i want omap 3430 device drivers can running in the linux, where i can
>> download any driver for omap 3430?..
>
>
All,
The DSS2 code base seems to inadvertently prevent downscaling of video
overlay frames. Attached is my attempt at a patch to resolve this
issue.
As I gather from the code, there is an attempt to limit the overlay
output frame size (x, y, outw, outh) to the managers updated window
(mc->x, m
subscribe
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
[EMAIL PROTECTED]
Bcc:
Subject: Re: [PATCH 0/3] lp5521
Reply-To: [EMAIL PROTECTED]
In-Reply-To: <[EMAIL PROTECTED]>
On Mon, Oct 06, 2008 at 12:11:28PM +0300, Felipe Balbi wrote:
> A few cleanups and moving to drivers/leds. This driver
> is probably ok for making its way to mainline, by the mornin
Hi all,
With "no_hz=off" added to my bootargs, I get the following message every two
minutes
on my 3430SDP. Also seen on the beagleboard (with a different gpio number, I
think).
Has anyone seen this before? Any clues why this happens?
- Anand
<3>INFO: task twl4030 gpio:263 blocked for more th
Hi All
Does any one has the ramdisk_ks.gz file ?
I checked for the site : http://www.wearablegroup.org/software/ramdisk
But I am not able to fine this site now? ( looks like the site validity
is expired )
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body
33 matches
Mail list logo