On Wed, Apr 16, 2008 at 06:08:03PM +0530, Syed Mohammed, Khasim wrote:
Add new board file for OMAP3 Beagle Board.
For more info regarding this board visit http://beagleboard.org
Signed-off-by: Syed Mohammed Khasim [EMAIL PROTECTED]
---
arch/arm/mach-omap2/board-omap3beagle.c | 79
1 file changed, 79 insertions(+)
Index: my_branch/arch/arm/mach-omap2/board-omap3beagle.c
===
--- /dev/null 1970-01-01 00:00:00.0 +
+++ my_branch/arch/arm/mach-omap2/board-omap3beagle.c 2008-04-16
14:45:52.0 +0530
@@ -0,0 +1,79 @@
+/*
+ * linux/arch/arm/mach-omap2/board-omap3beagle.c
+ *
+ * Copyright (C) 2008 Texas Instruments
+ *
+ * Modified from mach-omap2/board-3430sdp.c
+ *
+ * Initial code: Syed Mohammed Khasim
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include linux/kernel.h
+#include linux/init.h
+#include linux/platform_device.h
+#include linux/delay.h
+#include linux/err.h
+#include linux/clk.h
+#include linux/io.h
+
+#include asm/hardware.h
where's the board-omap3beagle.h ?
there's only the .c file so hardware.h is not adding anything here?
+#include asm/mach-types.h
+#include asm/mach/arch.h
+#include asm/mach/map.h
+
+#include asm/arch/gpio.h
+#include asm/arch/board.h
+#include asm/arch/common.h
+
+static struct omap_uart_config omap3_beagle_uart_config __initdata = {
+ .enabled_uarts = ((1 0) | (1 1) | (1 2)),
+};
+
+static int __init omap3_beagle_i2c_init(void)
+{
+ omap_register_i2c_bus(1, 2600, NULL, 0);
+ omap_register_i2c_bus(2, 400, NULL, 0);
+ omap_register_i2c_bus(3, 400, NULL, 0);
+ return 0;
+}
+
+static void __init omap3_beagle_init_irq(void)
+{
+ omap2_init_common_hw();
+ omap_init_irq();
+ omap_gpio_init();
+}
+
+static struct omap_board_config_kernel omap3_beagle_config[] __initdata = {
+ {OMAP_TAG_UART, omap3_beagle_uart_config },
+};
+
+static void __init omap3_beagle_init(void)
+{
+ omap_board_config = omap3_beagle_config;
+ omap_board_config_size = ARRAY_SIZE(omap3_beagle_config);
+ omap_serial_init();
+}
+
+arch_initcall(omap3_beagle_i2c_init);
+
+static void __init omap3_beagle_map_io(void)
+{
+ omap2_set_globals_343x();
+ omap2_map_common_io();
+}
+
+MACHINE_START(OMAP3_BEAGLE, OMAP3 Beagle Board)
+ /* Maintainer: Syed Mohammed Khasim - http://beagleboard.org */
+ .phys_io= 0x4800,
+ .io_pg_offst= ((0xd800) 18) 0xfffc,
+ .boot_params= 0x8100,
+ .map_io = omap3_beagle_map_io,
+ .init_irq = omap3_beagle_init_irq,
+ .init_machine = omap3_beagle_init,
+ .timer = omap_timer,
+MACHINE_END
--
To unsubscribe from this list: send the line unsubscribe linux-omap in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
--
Best Regards,
Felipe Balbi
[EMAIL PROTECTED]
http://blog.felipebalbi.com
--
To unsubscribe from this list: send the line unsubscribe linux-omap in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
