Use the AM33xx pinmux IOPAD macro to define the physical address instead
of the offset from the padconf address. It makes the DTS easier to read
since matches the addresses listed in the Technical Reference Manual.
Signed-off-by: Javier Martinez Canillas <jav...@osg.samsung.com>
---
arch/arm/boot/dts/am335x-igep0033.dtsi | 40 +++++++++++++++++-----------------
1 file changed, 20 insertions(+), 20 deletions(-)
diff --git a/arch/arm/boot/dts/am335x-igep0033.dtsi
b/arch/arm/boot/dts/am335x-igep0033.dtsi
index c0e1135256cc..54f113546ecc 100644
--- a/arch/arm/boot/dts/am335x-igep0033.dtsi
+++ b/arch/arm/boot/dts/am335x-igep0033.dtsi
@@ -56,41 +56,41 @@
&am33xx_pinmux {
i2c0_pins: pinmux_i2c0_pins {
pinctrl-single,pins = <
- 0x188 (PIN_INPUT_PULLUP | MUX_MODE0) /*
i2c0_sda.i2c0_sda */
- 0x18c (PIN_INPUT_PULLUP | MUX_MODE0) /*
i2c0_scl.i2c0_scl */
+ AM33XX_IOPAD(0x988, PIN_INPUT_PULLUP | MUX_MODE0)
/* i2c0_sda.i2c0_sda */
+ AM33XX_IOPAD(0x98c, PIN_INPUT_PULLUP | MUX_MODE0)
/* i2c0_scl.i2c0_scl */
>;
};
nandflash_pins: pinmux_nandflash_pins {
pinctrl-single,pins = <
- 0x0 (PIN_INPUT_PULLUP | MUX_MODE0) /*
gpmc_ad0.gpmc_ad0 */
- 0x4 (PIN_INPUT_PULLUP | MUX_MODE0) /*
gpmc_ad1.gpmc_ad1 */
- 0x8 (PIN_INPUT_PULLUP | MUX_MODE0) /*
gpmc_ad2.gpmc_ad2 */
- 0xc (PIN_INPUT_PULLUP | MUX_MODE0) /*
gpmc_ad3.gpmc_ad3 */
- 0x10 (PIN_INPUT_PULLUP | MUX_MODE0) /*
gpmc_ad4.gpmc_ad4 */
- 0x14 (PIN_INPUT_PULLUP | MUX_MODE0) /*
gpmc_ad5.gpmc_ad5 */
- 0x18 (PIN_INPUT_PULLUP | MUX_MODE0) /*
gpmc_ad6.gpmc_ad6 */
- 0x1c (PIN_INPUT_PULLUP | MUX_MODE0) /*
gpmc_ad7.gpmc_ad7 */
- 0x70 (PIN_INPUT_PULLUP | MUX_MODE0) /*
gpmc_wait0.gpmc_wait0 */
- 0x74 (PIN_INPUT_PULLUP | MUX_MODE7) /*
gpmc_wpn.gpio0_30 */
- 0x7c (PIN_OUTPUT | MUX_MODE0) /*
gpmc_csn0.gpmc_csn0 */
- 0x90 (PIN_OUTPUT | MUX_MODE0) /*
gpmc_advn_ale.gpmc_advn_ale */
- 0x94 (PIN_OUTPUT | MUX_MODE0) /*
gpmc_oen_ren.gpmc_oen_ren */
- 0x98 (PIN_OUTPUT | MUX_MODE0) /*
gpmc_wen.gpmc_wen */
- 0x9c (PIN_OUTPUT | MUX_MODE0) /*
gpmc_be0n_cle.gpmc_be0n_cle */
+ AM33XX_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE0)
/* gpmc_ad0.gpmc_ad0 */
+ AM33XX_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE0)
/* gpmc_ad1.gpmc_ad1 */
+ AM33XX_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE0)
/* gpmc_ad2.gpmc_ad2 */
+ AM33XX_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE0)
/* gpmc_ad3.gpmc_ad3 */
+ AM33XX_IOPAD(0x810, PIN_INPUT_PULLUP | MUX_MODE0)
/* gpmc_ad4.gpmc_ad4 */
+ AM33XX_IOPAD(0x814, PIN_INPUT_PULLUP | MUX_MODE0)
/* gpmc_ad5.gpmc_ad5 */
+ AM33XX_IOPAD(0x818, PIN_INPUT_PULLUP | MUX_MODE0)
/* gpmc_ad6.gpmc_ad6 */
+ AM33XX_IOPAD(0x81c, PIN_INPUT_PULLUP | MUX_MODE0)
/* gpmc_ad7.gpmc_ad7 */
+ AM33XX_IOPAD(0x870, PIN_INPUT_PULLUP | MUX_MODE0)
/* gpmc_wait0.gpmc_wait0 */
+ AM33XX_IOPAD(0x874, PIN_INPUT_PULLUP | MUX_MODE7)
/* gpmc_wpn.gpio0_30 */
+ AM33XX_IOPAD(0x87c, PIN_OUTPUT | MUX_MODE0)
/* gpmc_csn0.gpmc_csn0 */
+ AM33XX_IOPAD(0x890, PIN_OUTPUT | MUX_MODE0)
/* gpmc_advn_ale.gpmc_advn_ale */
+ AM33XX_IOPAD(0x894, PIN_OUTPUT | MUX_MODE0)
/* gpmc_oen_ren.gpmc_oen_ren */
+ AM33XX_IOPAD(0x898, PIN_OUTPUT | MUX_MODE0)
/* gpmc_wen.gpmc_wen */
+ AM33XX_IOPAD(0x89c, PIN_OUTPUT | MUX_MODE0)
/* gpmc_be0n_cle.gpmc_be0n_cle */
>;
};
uart0_pins: pinmux_uart0_pins {
pinctrl-single,pins = <
- 0x170 (PIN_INPUT_PULLUP | MUX_MODE0) /*
uart0_rxd.uart0_rxd */
- 0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /*
uart0_txd.uart0_txd */
+ AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0)
/* uart0_rxd.uart0_rxd */
+ AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0)
/* uart0_txd.uart0_txd */
>;
};
leds_pins: pinmux_leds_pins {
pinctrl-single,pins = <
- 0x5c (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /*
gpmc_a7.gpio1_23 */
+ AM33XX_IOPAD(0x85c, PIN_OUTPUT_PULLDOWN | MUX_MODE7)
/* gpmc_a7.gpio1_23 */
>;
};
};
--
2.4.3
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
