Re: [PATCH v5 09/17] OMAP2,3: DSS2: DSS: create platform_driver, move init,exit to driver
Hi Kevin, On Sat, Jan 8, 2011 at 5:13 AM, Kevin Hilman khil...@ti.com wrote: Sumit Semwal sumit.sem...@ti.com writes: From: Senthilvadivu Guruswamy svad...@ti.com Hwmod adaptation design requires each of the DSS HW IP to be a platform driver. So a platform_driver of DSS is created and init exit methods are moved from core.c to its driver probe,remove. pdev member has to be maintained by its own drivers. DSS platform driver is registered from inside omap_dss_probe, in the order desired. Signed-off-by: Senthilvadivu Guruswamy svad...@ti.com Signed-off-by: Sumit Semwal sumit.sem...@ti.com --- drivers/video/omap2/dss/core.c | 21 +++ drivers/video/omap2/dss/dss.c | 55 ++- drivers/video/omap2/dss/dss.h | 4 +- 3 files changed, 65 insertions(+), 15 deletions(-) diff --git a/drivers/video/omap2/dss/core.c b/drivers/video/omap2/dss/core.c index 48d20d8..faca859 100644 --- a/drivers/video/omap2/dss/core.c +++ b/drivers/video/omap2/dss/core.c @@ -497,9 +497,9 @@ static inline void dss_uninitialize_debugfs(void) static int omap_dss_probe(struct platform_device *pdev) { struct omap_dss_board_info *pdata = pdev-dev.platform_data; - int skip_init = 0; int r; int i; + int skip_init = 0; looks like unnessary move. maybe you meant to remove this var since its usage was removed from this function? core.pdev = pdev; @@ -517,15 +517,9 @@ static int omap_dss_probe(struct platform_device *pdev) core.ctx_id = dss_get_ctx_id(); DSSDBG(initial ctx id %u\n, core.ctx_id); -#ifdef CONFIG_FB_OMAP_BOOTLOADER_INIT - /* DISPC_CONTROL */ - if (omap_readl(0x48050440) 1) /* LCD enabled? */ - skip_init = 1; -#endif - - r = dss_init(skip_init); + r = dss_init_platform_driver(); if (r) { - DSSERR(Failed to initialize DSS\n); + DSSERR(Failed to initialize DSS platform driver\n); goto err_dss; } @@ -553,6 +547,11 @@ static int omap_dss_probe(struct platform_device *pdev) goto err_venc; } +#ifdef CONFIG_FB_OMAP_BOOTLOADER_INIT + /* DISPC_CONTROL */ + if (omap_readl(0x48050440) 1) /* LCD enabled? */ + skip_init = 1; +#endif nope, you just moved it here. But it's also duplicated in dsshw_probe below. Is that needed? Yes; these two are needed as both dss_init() (which is replaced with dss_init_platform_driver() in this patch) and also by sdi_init(). sdi_init() is a software init, so it will not be moved to a platform_driver. That's why we need the #ifdef.. #endif in both dss_probe() and dsshw_probe(). if (cpu_is_omap34xx()) { r = sdi_init(skip_init); if (r) { @@ -610,7 +609,7 @@ err_dispc: err_dpi: rfbi_exit(); err_rfbi: - dss_exit(); + dss_deinit_platform_driver(); s/deinit/uninit/ or uninitial Sure, will change. err_dss: dss_clk_disable_all_no_ctx(); dss_put_clocks(); @@ -636,7 +635,7 @@ static int omap_dss_remove(struct platform_device *pdev) sdi_exit(); } - dss_exit(); + dss_deinit_platform_driver(); /* these should be removed at some point */ c = core.dss_ick-usecount; diff --git a/drivers/video/omap2/dss/dss.c b/drivers/video/omap2/dss/dss.c index 77c3621..ebb294a 100644 --- a/drivers/video/omap2/dss/dss.c +++ b/drivers/video/omap2/dss/dss.c @@ -59,6 +59,7 @@ struct dss_reg { dss_write_reg(idx, FLD_MOD(dss_read_reg(idx), val, start, end)) static struct { + struct platform_device *pdev; void __iomem *base; struct clk *dpll4_m4_ck; @@ -549,7 +550,7 @@ void dss_set_dac_pwrdn_bgz(bool enable) REG_FLD_MOD(DSS_CONTROL, enable, 5, 5); /* DAC Power-Down Control */ } -int dss_init(bool skip_init) +static int dss_init(bool skip_init) { int r; u32 rev; @@ -629,7 +630,7 @@ fail0: return r; } -void dss_exit(void) +static void dss_exit(void) { if (cpu_is_omap34xx()) clk_put(dss.dpll4_m4_ck); @@ -639,3 +640,53 @@ void dss_exit(void) iounmap(dss.base); } +/* DSS HW IP initialisation */ +static int omap_dsshw_probe(struct platform_device *pdev) +{ + int r; + int skip_init = 0; + + dss.pdev = pdev; + +#ifdef CONFIG_FB_OMAP_BOOTLOADER_INIT + /* DISPC_CONTROL */ + if (omap_readl(0x48050440) 1) /* LCD enabled? */ + skip_init = 1; +#endif + + r = dss_init(skip_init); + if (r) { + DSSERR(Failed to initialize DSS\n); + goto err_dss; + } + +err_dss: + + return r; +} + +static int omap_dsshw_remove(struct platform_device *pdev) +{ + dss_exit(); + + return 0; +} + +static struct platform_driver omap_dsshw_driver = { + .probe = omap_dsshw_probe, + .remove = omap_dsshw_remove, +
Re: [PATCH v5 09/17] OMAP2,3: DSS2: DSS: create platform_driver, move init,exit to driver
Sumit Semwal sumit.sem...@ti.com writes: From: Senthilvadivu Guruswamy svad...@ti.com Hwmod adaptation design requires each of the DSS HW IP to be a platform driver. So a platform_driver of DSS is created and init exit methods are moved from core.c to its driver probe,remove. pdev member has to be maintained by its own drivers. DSS platform driver is registered from inside omap_dss_probe, in the order desired. Signed-off-by: Senthilvadivu Guruswamy svad...@ti.com Signed-off-by: Sumit Semwal sumit.sem...@ti.com --- drivers/video/omap2/dss/core.c | 21 +++ drivers/video/omap2/dss/dss.c | 55 ++- drivers/video/omap2/dss/dss.h |4 +- 3 files changed, 65 insertions(+), 15 deletions(-) diff --git a/drivers/video/omap2/dss/core.c b/drivers/video/omap2/dss/core.c index 48d20d8..faca859 100644 --- a/drivers/video/omap2/dss/core.c +++ b/drivers/video/omap2/dss/core.c @@ -497,9 +497,9 @@ static inline void dss_uninitialize_debugfs(void) static int omap_dss_probe(struct platform_device *pdev) { struct omap_dss_board_info *pdata = pdev-dev.platform_data; - int skip_init = 0; int r; int i; + int skip_init = 0; looks like unnessary move. maybe you meant to remove this var since its usage was removed from this function? core.pdev = pdev; @@ -517,15 +517,9 @@ static int omap_dss_probe(struct platform_device *pdev) core.ctx_id = dss_get_ctx_id(); DSSDBG(initial ctx id %u\n, core.ctx_id); -#ifdef CONFIG_FB_OMAP_BOOTLOADER_INIT - /* DISPC_CONTROL */ - if (omap_readl(0x48050440) 1) /* LCD enabled? */ - skip_init = 1; -#endif - - r = dss_init(skip_init); + r = dss_init_platform_driver(); if (r) { - DSSERR(Failed to initialize DSS\n); + DSSERR(Failed to initialize DSS platform driver\n); goto err_dss; } @@ -553,6 +547,11 @@ static int omap_dss_probe(struct platform_device *pdev) goto err_venc; } +#ifdef CONFIG_FB_OMAP_BOOTLOADER_INIT + /* DISPC_CONTROL */ + if (omap_readl(0x48050440) 1) /* LCD enabled? */ + skip_init = 1; +#endif nope, you just moved it here. But it's also duplicated in dsshw_probe below. Is that needed? if (cpu_is_omap34xx()) { r = sdi_init(skip_init); if (r) { @@ -610,7 +609,7 @@ err_dispc: err_dpi: rfbi_exit(); err_rfbi: - dss_exit(); + dss_deinit_platform_driver(); s/deinit/uninit/ or uninitial err_dss: dss_clk_disable_all_no_ctx(); dss_put_clocks(); @@ -636,7 +635,7 @@ static int omap_dss_remove(struct platform_device *pdev) sdi_exit(); } - dss_exit(); + dss_deinit_platform_driver(); /* these should be removed at some point */ c = core.dss_ick-usecount; diff --git a/drivers/video/omap2/dss/dss.c b/drivers/video/omap2/dss/dss.c index 77c3621..ebb294a 100644 --- a/drivers/video/omap2/dss/dss.c +++ b/drivers/video/omap2/dss/dss.c @@ -59,6 +59,7 @@ struct dss_reg { dss_write_reg(idx, FLD_MOD(dss_read_reg(idx), val, start, end)) static struct { + struct platform_device *pdev; void __iomem*base; struct clk *dpll4_m4_ck; @@ -549,7 +550,7 @@ void dss_set_dac_pwrdn_bgz(bool enable) REG_FLD_MOD(DSS_CONTROL, enable, 5, 5); /* DAC Power-Down Control */ } -int dss_init(bool skip_init) +static int dss_init(bool skip_init) { int r; u32 rev; @@ -629,7 +630,7 @@ fail0: return r; } -void dss_exit(void) +static void dss_exit(void) { if (cpu_is_omap34xx()) clk_put(dss.dpll4_m4_ck); @@ -639,3 +640,53 @@ void dss_exit(void) iounmap(dss.base); } +/* DSS HW IP initialisation */ +static int omap_dsshw_probe(struct platform_device *pdev) +{ + int r; + int skip_init = 0; + + dss.pdev = pdev; + +#ifdef CONFIG_FB_OMAP_BOOTLOADER_INIT + /* DISPC_CONTROL */ + if (omap_readl(0x48050440) 1) /* LCD enabled? */ + skip_init = 1; +#endif + + r = dss_init(skip_init); + if (r) { + DSSERR(Failed to initialize DSS\n); + goto err_dss; + } + +err_dss: + + return r; +} + +static int omap_dsshw_remove(struct platform_device *pdev) +{ + dss_exit(); + + return 0; +} + +static struct platform_driver omap_dsshw_driver = { + .probe = omap_dsshw_probe, + .remove = omap_dsshw_remove, + .driver = { + .name = omap_dss, + .owner = THIS_MODULE, + }, +}; + +int dss_init_platform_driver(void) +{ + return platform_driver_register(omap_dsshw_driver); +} + +void dss_deinit_platform_driver(void) +{ + return platform_driver_unregister(omap_dsshw_driver); +} Is there a reason for these extra functions? Why