Convert Assabet socket driver to use the new irq/gpio management.
This is slightly more involved because we have to touch the private
platform header file to modify the GPIO bitmasks to be GPIO numbers.
Signed-off-by: Russell King <rmk+ker...@arm.linux.org.uk>
---
arch/arm/mach-sa1100/include/mach/assabet.h | 15 +++----
drivers/pcmcia/sa1100_assabet.c | 64 ++++++--------------------
2 files changed, 21 insertions(+), 58 deletions(-)
diff --git a/arch/arm/mach-sa1100/include/mach/assabet.h
b/arch/arm/mach-sa1100/include/mach/assabet.h
index 28c2cf5..3073914 100644
--- a/arch/arm/mach-sa1100/include/mach/assabet.h
+++ b/arch/arm/mach-sa1100/include/mach/assabet.h
@@ -85,21 +85,18 @@ extern void ASSABET_BCR_frob(unsigned int mask, unsigned
int set);
#define ASSABET_BSR_RAD_RI (1 << 31)
-/* GPIOs for which the generic definition doesn't say much */
+/* GPIOs (bitmasks) for which the generic definition doesn't say much */
#define ASSABET_GPIO_RADIO_IRQ GPIO_GPIO (14) /* Radio interrupt
request */
#define ASSABET_GPIO_PS_MODE_SYNC GPIO_GPIO (16) /* Power supply
mode/sync */
#define ASSABET_GPIO_STEREO_64FS_CLK GPIO_GPIO (19) /* SSP UDA1341 clock
input */
-#define ASSABET_GPIO_CF_IRQ GPIO_GPIO (21) /* CF IRQ */
-#define ASSABET_GPIO_CF_CD GPIO_GPIO (22) /* CF CD */
-#define ASSABET_GPIO_CF_BVD2 GPIO_GPIO (24) /* CF BVD */
#define ASSABET_GPIO_GFX_IRQ GPIO_GPIO (24) /* Graphics IRQ */
-#define ASSABET_GPIO_CF_BVD1 GPIO_GPIO (25) /* CF BVD */
#define ASSABET_GPIO_BATT_LOW GPIO_GPIO (26) /* Low battery */
#define ASSABET_GPIO_RCLK GPIO_GPIO (26) /* CCLK/2 */
-#define ASSABET_IRQ_GPIO_CF_IRQ IRQ_GPIO21
-#define ASSABET_IRQ_GPIO_CF_CD IRQ_GPIO22
-#define ASSABET_IRQ_GPIO_CF_BVD2 IRQ_GPIO24
-#define ASSABET_IRQ_GPIO_CF_BVD1 IRQ_GPIO25
+/* These are gpiolib GPIO numbers, not bitmasks */
+#define ASSABET_GPIO_CF_IRQ 21 /* CF IRQ */
+#define ASSABET_GPIO_CF_CD 22 /* CF CD */
+#define ASSABET_GPIO_CF_BVD2 24 /* CF BVD / IOSPKR */
+#define ASSABET_GPIO_CF_BVD1 25 /* CF BVD / IOSTSCHG */
#endif
diff --git a/drivers/pcmcia/sa1100_assabet.c b/drivers/pcmcia/sa1100_assabet.c
index f1e8822..618f546 100644
--- a/drivers/pcmcia/sa1100_assabet.c
+++ b/drivers/pcmcia/sa1100_assabet.c
@@ -10,45 +10,30 @@
#include <linux/interrupt.h>
#include <linux/device.h>
#include <linux/init.h>
+#include <linux/gpio.h>
-#include <mach/hardware.h>
#include <asm/mach-types.h>
-#include <asm/irq.h>
-#include <asm/signal.h>
#include <mach/assabet.h>
#include "sa1100_generic.h"
-static struct pcmcia_irqs irqs[] = {
- { 1, ASSABET_IRQ_GPIO_CF_CD, "CF CD" },
- { 1, ASSABET_IRQ_GPIO_CF_BVD2, "CF BVD2" },
- { 1, ASSABET_IRQ_GPIO_CF_BVD1, "CF BVD1" },
-};
-
static int assabet_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
{
- skt->socket.pci_irq = ASSABET_IRQ_GPIO_CF_IRQ;
-
- return soc_pcmcia_request_irqs(skt, irqs, ARRAY_SIZE(irqs));
-}
+ skt->stat[SOC_STAT_CD].gpio = ASSABET_GPIO_CF_CD;
+ skt->stat[SOC_STAT_CD].name = "CF CD";
+ skt->stat[SOC_STAT_BVD1].gpio = ASSABET_GPIO_CF_BVD1;
+ skt->stat[SOC_STAT_BVD1].name = "CF BVD1";
+ skt->stat[SOC_STAT_BVD2].gpio = ASSABET_GPIO_CF_BVD2;
+ skt->stat[SOC_STAT_BVD2].name = "CF BVD2";
+ skt->stat[SOC_STAT_RDY].gpio = ASSABET_GPIO_CF_IRQ;
+ skt->stat[SOC_STAT_RDY].name = "CF RDY";
-/*
- * Release all resources.
- */
-static void assabet_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt)
-{
- soc_pcmcia_free_irqs(skt, irqs, ARRAY_SIZE(irqs));
+ return 0;
}
static void
assabet_pcmcia_socket_state(struct soc_pcmcia_socket *skt, struct pcmcia_state
*state)
{
- unsigned long levels = GPLR;
-
- state->detect = (levels & ASSABET_GPIO_CF_CD) ? 0 : 1;
- state->ready = (levels & ASSABET_GPIO_CF_IRQ) ? 1 : 0;
- state->bvd1 = (levels & ASSABET_GPIO_CF_BVD1) ? 1 : 0;
- state->bvd2 = (levels & ASSABET_GPIO_CF_BVD2) ? 1 : 0;
state->wrprot = 0; /* Not available on Assabet. */
state->vs_3v = 1; /* Can only apply 3.3V on Assabet. */
state->vs_Xv = 0;
@@ -78,38 +63,24 @@ assabet_pcmcia_configure_socket(struct soc_pcmcia_socket
*skt, const socket_stat
return -1;
}
- /* Silently ignore Vpp, output enable, speaker enable. */
+ /* Silently ignore Vpp, speaker enable. */
if (state->flags & SS_RESET)
mask |= ASSABET_BCR_CF_RST;
+ if (!(state->flags & SS_OUTPUT_ENA))
+ mask |= ASSABET_BCR_CF_BUS_OFF;
- ASSABET_BCR_frob(ASSABET_BCR_CF_RST | ASSABET_BCR_CF_PWR, mask);
+ ASSABET_BCR_frob(ASSABET_BCR_CF_RST | ASSABET_BCR_CF_PWR |
+ ASSABET_BCR_CF_BUS_OFF, mask);
return 0;
}
/*
- * Enable card status IRQs on (re-)initialisation. This can
- * be called at initialisation, power management event, or
- * pcmcia event.
- */
-static void assabet_pcmcia_socket_init(struct soc_pcmcia_socket *skt)
-{
- /*
- * Enable CF bus
- */
- ASSABET_BCR_clear(ASSABET_BCR_CF_BUS_OFF);
-
- soc_pcmcia_enable_irqs(skt, irqs, ARRAY_SIZE(irqs));
-}
-
-/*
* Disable card status IRQs on suspend.
*/
static void assabet_pcmcia_socket_suspend(struct soc_pcmcia_socket *skt)
{
- soc_pcmcia_disable_irqs(skt, irqs, ARRAY_SIZE(irqs));
-
/*
* Tristate the CF bus signals. Also assert CF
* reset as per user guide page 4-11.
@@ -119,14 +90,9 @@ static void assabet_pcmcia_socket_suspend(struct
soc_pcmcia_socket *skt)
static struct pcmcia_low_level assabet_pcmcia_ops = {
.owner = THIS_MODULE,
-
.hw_init = assabet_pcmcia_hw_init,
- .hw_shutdown = assabet_pcmcia_hw_shutdown,
-
.socket_state = assabet_pcmcia_socket_state,
.configure_socket = assabet_pcmcia_configure_socket,
-
- .socket_init = assabet_pcmcia_socket_init,
.socket_suspend = assabet_pcmcia_socket_suspend,
};
--
1.7.4.4
_______________________________________________
Linux PCMCIA reimplementation list
http://lists.infradead.org/mailman/listinfo/linux-pcmcia
