Hi,We are experiencing the following on our M640 blades. After a reseat of a blade or reset of the iDrac the system always mails:
System Host Name: hostname Event Message: FlexAddress is enabled on all NIC and FC HBA devices. Date/Time: Tue, 13 Feb 2018 14:29:59 +0100 Severity: Informational Detailed Description: The FlexAddress feature is enabled on the system. The iDRAC will assign FlexAddress defined MAC and WWN values to all the ports and/or partitions of bNDCs and mezzanine adapters of the system. Recommended Action: No response action is required. Message ID: IOID119 This is good, but... This mail is sometimes first send from hostname@0.0.0.0 instead of the hostname@192.168.0.34 It looks like timing issue on the drac. The mail was created before it actually is using the right ip address. idrac firmware level is 3.15.17.15. We also have T640 with idrac9 but never seen this behavior there. Does anyone recognize this? -- Met vriendelijke groeten / Kind regards, Jaap P. Dijkshoorn | ISC, Cluster & Super Computing | SURFsara | https://www.surfsara.nl | | Science Park 140 | 1098 XG Amsterdam | Phone: +31208001300 | | email:jaap.dijksho...@surfsara.nl | skype:jaap.dijksho...@surfsara.nl | | | We are ISO 27001 certified and meet the high requirements for information security. |
smime.p7s
Description: S/MIME Cryptographic Signature
_______________________________________________ Linux-PowerEdge mailing list Linux-PowerEdge@dell.com https://lists.us.dell.com/mailman/listinfo/linux-poweredge
