> I can reproduce this on Lager board now.
> If I OFF:ed on SW8 : 4bit (= MD21), kernel boot will be failed.
> It happened on both board
Even with my recent patch?
signature.asc
Description: PGP signature
Hi Geert, Wolfram
> > Magnus has my previous Lager board, so I can't try it today.
> > I think my current board and previous board have different type of chip.
> > Magnus will bring me my previous board tomorrow, so I will check it,
> > and try your solution.
>
> The revision doesn't seem to be
This enables EXTALR clock that can be used for the watchdog.
Signed-off-by: Vladimir Barinov
---
Changes in version 3:
- initially added
arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts | 4
1 file changed, 4 insertions(+)
diff --git
This supports SDHI0 on H3ULCB board SD card slot
Signed-off-by: Vladimir Barinov
---
Changes in version 3:
- initially added
arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts | 48 ++
1 file changed, 48 insertions(+)
diff --git
This supports I2C2 bus on H3ULCB board
Signed-off-by: Vladimir Barinov
---
Changes in version 3:
- initially added
arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts | 12
1 file changed, 12 insertions(+)
diff --git
This supports USB2.0 Host channel 1 on H3ULCB board
Signed-off-by: Vladimir Barinov
---
Changes in version 3:
- initially added
arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts | 8
1 file changed, 8 insertions(+)
diff --git
This supports SSI sound for H3ULCB board.
SSI DMA mode used. CS2000 used as AUDIO_CLK_B.
Signed-off-by: Vladimir Barinov
---
Changes in version 3:
- initially added
arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts | 115 +
1 file
This supports Ethernet AVB on H3ULCB board
Signed-off-by: Vladimir Barinov
---
Changes in version 3:
- initially added
arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts | 32 ++
1 file changed, 32 insertions(+)
diff --git
This supports GPIO leds on H3ULCB board
Signed-off-by: Vladimir Barinov
---
Changes in version 3:
- initially added
arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts | 13 +
1 file changed, 13 insertions(+)
diff --git
Add H3ULCB Device tree bindings Documentation, listing it as a supported
board.
Signed-off-by: Vladimir Barinov
Acked-by: Rob Herring
Reviewed-by: Geert Uytterhoeven
---
Changes in version 2:
- none
Changes in
This enables the external crystal for the SCIF_CLK and its pinctrl, to
be used by the Baud Rate Generator for External Clock (BRG) on (H)SCIF.
Signed-off-by: Vladimir Barinov
---
Changes in version 3:
- initially added
Hello,
This adds the folowing:
- R8A7795 SoC based H3ULCB low cost board device tree
- Document DT bindings
Vladimir Barinov (12):
[01/12] dt: arm: shmobile: add H3ULCB board DT bindings
[02/12] arm64: dts: h3ulcb: initial device tree
[03/12] arm64: dts: h3ulcb: enable SCIF clk and pins
[04/12]
"spi_sh_msiof" is used on sh7723 and sh7724 only. As all of the above
select ARCH_SHMOBILE, restrict its driver dependencies from SUPERH to
ARCH_SHMOBILE.
Signed-off-by: Geert Uytterhoeven
---
drivers/spi/Kconfig | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
"i2c-sh_mobile" is used on sh7343, sh7366, sh7722, sh7723, and sh7724
only. As all of the above select ARCH_SHMOBILE, restrict its driver
dependencies from SUPERH to ARCH_SHMOBILE.
Signed-off-by: Geert Uytterhoeven
---
drivers/i2c/busses/Kconfig | 2 +-
1 file changed,
If clk_prepare_enable() fails, we must not call clk_disable_unprepare()
in the error path.
Signed-off-by: Geert Uytterhoeven
---
drivers/pci/host/pcie-rcar.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/pci/host/pcie-rcar.c
Enable i2c6, and add a device node for the da9063 PMIC, with subnodes
for rtc and wdt. Regulator support is not yet included.
This allows the system to be restarted when the watchdog timer times
out, or when a system restart is requested.
Signed-off-by: Geert Uytterhoeven
Signed-off-by: Geert Uytterhoeven
---
Documentation/devicetree/bindings/arm/shmobile.txt | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/arm/shmobile.txt
b/Documentation/devicetree/bindings/arm/shmobile.txt
index
On Tue, Aug 30, 2016 at 11:09:56PM +0200, Simon Horman wrote:
> Signed-off-by: Simon Horman
> ---
> v5
> * New patch
Huh? There is already 721e9a08aa514c ("arm64: dts: r8a7795: set maximum
frequency for SDHI clocks") in renesas/drivers? Why didn't you pick this
one?
Hi Wolfram,
On Wed, Aug 31, 2016 at 10:07 AM, Wolfram Sang wrote:
> Am I recalling correctly that noone of us has access to DA9063
> documentation? Is this still true? Or do we know the differences of the
> revisions?
Yes.
I had completely forgotten I did apply for
> The revision doesn't seem to be printed on the chip package, but it is
> identified by the da9063 driver (CONFIG_REGULATOR_DA9063=y).
Am I recalling correctly that noone of us has access to DA9063
documentation? Is this still true? Or do we know the differences of the
revisions?
On 30 August 2016 at 23:09, Simon Horman wrote:
> From: Ai Kyuse
>
> Add hw reset support.
>
> Signed-off-by: Ai Kyuse
> Signed-off-by: Simon Horman
> ---
> This is required by tuning
Hi Morimoto-san,
On Wed, Aug 31, 2016 at 8:20 AM, Kuninori Morimoto
wrote:
>> > I noticed that Lager "ES3.0" board can't boot on this and previous -rc2
>> > branch.
>> > In my and Shimoda-san's check, "ES2.0" seems have no problem.
>>
>> I understand the issue
On 30 August 2016 at 22:51, Simon Horman wrote:
> On Mon, Aug 29, 2016 at 04:05:55PM +0200, Ulf Hansson wrote:
>> On 29 August 2016 at 14:05, Simon Horman wrote:
>> > On Fri, Aug 26, 2016 at 10:01:35AM +0200, Ulf Hansson wrote:
>> >> On 25 August 2016 at
Hi Sergei,
On Wed, Aug 31, 2016 at 12:24 AM, Sergei Shtylyov
wrote:
> Define the Wheat board dependent part of the SDHI0 (connected to the
> micro-SD slot) device node along with the necessary voltage regulator.
>
> Signed-off-by: Sergei Shtylyov
Hi Geert,
here is a topic branch for renesas-drivers. Most of the patches I did
for this i2c/sdhi maintenance task are already in renesas-drivers,
because they came back via linux-next. Only the last three are missing
currently, but they are on the way, too. So, this branch will soonish
become
From: Arnd Bergmann
Date: Fri, 26 Aug 2016 17:30:29 +0200
> When CONFIG_PM_SLEEP is disabled, we get a couple of harmless warnings:
>
> drivers/net/ethernet/renesas/ravb_main.c:2117:12: error: 'ravb_resume'
> defined but not used [-Werror=unused-function]
>
Hi Wolfram
> > I noticed that Lager "ES3.0" board can't boot on this and previous -rc2
> > branch.
> > In my and Shimoda-san's check, "ES2.0" seems have no problem.
>
> I understand the issue now. It is not about ES3.0 vs. ES2.0, it is about
> cold-boot vs. warm-boot. I remembered the DA9xxx
27 matches
Mail list logo