Hi Shimoda-san,
I just saw that you patch predates mine. I will drop my version and
integrate yours.
Many thanks for for your support,
Petre
On Fri, May 19, 2017 at 12:50 AM, Petre Pircalabu
<petre.pircal...@gmail.com> wrote:
> Hi Geert, Shimoda-san,
>
> I have also used initial
a patch for these platforms, but I
would require your assistance in order to test it (I'm feeling a
little bit queasy in submitting an untested patch).
Best regards,
Petre
On Thu, May 18, 2017 at 11:21 PM, Petre Pircalabu
<petre.pircal...@gmail.com> wrote:
> Hi Geert, Shimoda-san,
&g
Hi Geert, Shimoda-san,
First, thank you very much for your comments. I will refactor the
patch and send a v2 patchset as soon as possible.
To my understanding, although the RCAR Gen3 HW manual references the
clk frequencies (50MHz for XTAL and 100MHz for external clock) the
actual register
the on-chip source by adding the
"renesas,use-on-chip-clk" option in the corresponding device tree node.
Signed-off-by: Petre Pircalabu <petre_pircal...@mentor.com>
---
.../devicetree/bindings/phy/rcar-gen3-phy-usb3.txt | 22 +++
arch/arm64/boot/dts/renesas/r8a7795-es1.dtsi
