On Fri, May 5, 2017 at 2:45 PM, Chris Brandt wrote:
> On Friday, May 05, 2017, Linus Walleij wrote:
>> > This is the part of the whole "DT is for hardware description only" that
>> doesn't really make sense to me.
>>
>> OK yeah we do hardware description AND
On Friday, May 05, 2017, Linus Walleij wrote:
> > This is the part of the whole "DT is for hardware description only" that
> doesn't really make sense to me.
>
> OK yeah we do hardware description AND configuration.
>
> And we never do interpreted languages.
>
> And then there is a bunch of
Hi Linus,
On Fri, May 5, 2017 at 2:06 PM, Linus Walleij wrote:
> On Fri, Apr 28, 2017 at 4:48 PM, Chris Brandt
> wrote:
>
> I think this was written by me, not Geert...
>
>>> DT describes hardware, not software limitations.
Na, I did write
Hi Geert,
On Friday, April 28, 2017, Geert Uytterhoeven wrote:
> >> Shouldn't the interrupt (connected to P1_15) be described?
> >
> > That interrupt pin from the PHY is not used. It did not need to be
> connected.
>
> But it is connected, according to the schematics.
P1_15 can be configured
On Thu, Apr 27, 2017 at 10:19 AM, Jacopo Mondi
wrote:
> Add pin configuration subnode for ETHER ethernet controller.
>
> Signed-off-by: Jacopo Mondi
(...)
> + pins_bidir {
> + pinmux =
Hi Chris,
On Thu, Apr 27, 2017 at 12:48 PM, Chris Brandt wrote:
> On Thursday, April 27, 2017, Geert Uytterhoeven wrote:
>> > + {
>> > + pinctrl-names = "default";
>> > + pinctrl-0 = <_pins>;
>> > +
>> > + status = "okay";
>> > +
>> > +
On Thu, Apr 27, 2017 at 10:48:45AM +, Chris Brandt wrote:
> Hi Geert,
>
> On Thursday, April 27, 2017, Geert Uytterhoeven wrote:
> > > + {
> > > + pinctrl-names = "default";
> > > + pinctrl-0 = <_pins>;
> > > +
> > > + status = "okay";
> > > +
> > > +
Hi Geert,
On Thursday, April 27, 2017, Geert Uytterhoeven wrote:
> > + {
> > + pinctrl-names = "default";
> > + pinctrl-0 = <_pins>;
> > +
> > + status = "okay";
> > +
> > + renesas,no-ether-link;
> > + phy-handle = <>;
> > + phy0: ethernet-phy@0 {
> > +
Hi Jacopo,
On Thu, Apr 27, 2017 at 10:19 AM, Jacopo Mondi
wrote:
> Add pin configuration subnode for ETHER ethernet controller.
>
> Signed-off-by: Jacopo Mondi
Reviewed-by: Geert Uytterhoeven
> ---
Add pin configuration subnode for ETHER ethernet controller.
Signed-off-by: Jacopo Mondi
---
arch/arm/boot/dts/r7s72100-genmai.dts | 41 +++
1 file changed, 41 insertions(+)
diff --git a/arch/arm/boot/dts/r7s72100-genmai.dts
10 matches
Mail list logo