On 2018/3/6 0:47, Phil Edworthy wrote:
Hi Shawn,
On 28 February 2018 01:53, Shawn Lin wrote:
On 2018/2/27 23:05, Phil Edworthy wrote:
On 27 February 2018 14:42, Shawn Lin wrote:
On 2018/2/27 22:31, Phil Edworthy wrote:
On 27 February 2018 14:28, Shawn Lin wrote:
在 2018/2/27 21:55, Phil
Hi Shawn,
On 28 February 2018 01:53, Shawn Lin wrote:
> On 2018/2/27 23:05, Phil Edworthy wrote:
> > On 27 February 2018 14:42, Shawn Lin wrote:
> >> On 2018/2/27 22:31, Phil Edworthy wrote:
> >>> On 27 February 2018 14:28, Shawn Lin wrote:
> 在 2018/2/27 21:55, Phil Edworthy 写道:
> >
On 2018/2/27 23:05, Phil Edworthy wrote:
Hi Shawn,
On 27 February 2018 14:42, Shawn Lin wrote:
On 2018/2/27 22:31, Phil Edworthy wrote:
Hi Shawn,
On 27 February 2018 14:28, Shawn Lin wrote:
在 2018/2/27 21:55, Phil Edworthy 写道:
Since the controller does not support the end-of-busy IRQ,
Hi Shawn,
On 27 February 2018 14:42, Shawn Lin wrote:
> On 2018/2/27 22:31, Phil Edworthy wrote:
> > Hi Shawn,
> >
> > On 27 February 2018 14:28, Shawn Lin wrote:
> >> 在 2018/2/27 21:55, Phil Edworthy 写道:
> >>> Since the controller does not support the end-of-busy IRQ, don't use it.
> >>>
On 2018/2/27 22:31, Phil Edworthy wrote:
Hi Shawn,
On 27 February 2018 14:28, Shawn Lin wrote:
在 2018/2/27 21:55, Phil Edworthy 写道:
Since the controller does not support the end-of-busy IRQ, don't use it.
Otherwise, on older SD cards you will get lots of these messages:
"mmc0: Got data
在 2018/2/27 21:55, Phil Edworthy 写道:
Since the controller does not support the end-of-busy IRQ, don't use it.
Otherwise, on older SD cards you will get lots of these messages:
"mmc0: Got data interrupt 0x0002 even though no data operation was in
progress"
I'm afraid you have to explain
Hi Adrian,
On 27 February 2018 14:08, Adrian Hunter wrote:
> On 27/02/18 15:55, Phil Edworthy wrote:
> > Since the controller does not support the end-of-busy IRQ, don't use it.
> > Otherwise, on older SD cards you will get lots of these messages:
> > "mmc0: Got data interrupt 0x0002 even
On 27/02/18 15:55, Phil Edworthy wrote:
> Since the controller does not support the end-of-busy IRQ, don't use it.
> Otherwise, on older SD cards you will get lots of these messages:
> "mmc0: Got data interrupt 0x0002 even though no data operation was in
> progress"
SDHCI_QUIRK2_STOP_WITH_TC
