Hi Laurent,
On Tue, Nov 15, 2016 at 12:59 AM, Laurent Pinchart
wrote:
> On Monday 14 Nov 2016 20:47:03 Geert Uytterhoeven wrote:
>> On Mon, Nov 14, 2016 at 5:44 PM, Laurent Pinchart wrote:
>> > On Monday 14 Nov 2016 14:47:00 Geert Uytterhoeven wrote:
>> >> On
On 11/14, Geert Uytterhoeven wrote:
> Hi Stephen,
>
> On Fri, Nov 11, 2016 at 12:35 AM, Stephen Boyd wrote:
> > On 11/07, Geert Uytterhoeven wrote:
> >> clk: renesas: Updates for v4.10 (take one)
> >>
> >> - SYS-DMAC, (H)SCIF, I2C, DRIF, and graphics related clocks for
Hi Rob,
On Monday 14 Nov 2016 19:40:26 Rob Herring wrote:
> On Mon, Oct 17, 2016 at 7:42 AM, Laurent Pinchart wrote:
> > On Friday 14 Oct 2016 07:40:14 Rob Herring wrote:
> >> On Sun, Oct 9, 2016 at 11:33 AM, Laurent Pinchart wrote:
> >>> On Saturday 08 Oct 2016 20:29:39 Rob Herring wrote:
>
And the title should of course have read "R-Car LVDS mode selection support",
sorry about that.
On Tuesday 15 Nov 2016 03:51:04 Laurent Pinchart wrote:
> Hi Geert,
>
> The following changes since commit 1001354ca34179f3db924eb66672442a173147dc:
>
> Linux 4.9-rc1 (2016-10-15 12:17:50 -0700)
>
Hi Geert,
The following changes since commit 1001354ca34179f3db924eb66672442a173147dc:
Linux 4.9-rc1 (2016-10-15 12:17:50 -0700)
are available in the git repository at:
git://linuxtv.org/pinchartl/media.git drm/next/lvds
for you to fetch changes up to
Hi Geert,
The following changes since commit 1001354ca34179f3db924eb66672442a173147dc:
Linux 4.9-rc1 (2016-10-15 12:17:50 -0700)
are available in the git repository at:
git://linuxtv.org/pinchartl/media.git drm/r8a7796/next
for you to fetch changes up to
On Mon, Oct 17, 2016 at 7:42 AM, Laurent Pinchart
wrote:
> Hi Rob,
>
> On Friday 14 Oct 2016 07:40:14 Rob Herring wrote:
>> On Sun, Oct 9, 2016 at 11:33 AM, Laurent Pinchart wrote:
>> > On Saturday 08 Oct 2016 20:29:39 Rob Herring wrote:
>> >> On Tue, Oct 04,
The aa104xd12 and aa121td01 panels are LVDS panels, not DPI panels.
Use the correct DT bindings.
Signed-off-by: Laurent Pinchart
---
arch/arm/boot/dts/r8a77xx-aa104xd12-panel.dtsi | 3 ++-
arch/arm/boot/dts/r8a77xx-aa121td01-panel.dtsi | 3 ++-
2 files
Hi Geert,
On Monday 14 Nov 2016 20:47:03 Geert Uytterhoeven wrote:
> On Mon, Nov 14, 2016 at 5:44 PM, Laurent Pinchart wrote:
> > On Monday 14 Nov 2016 14:47:00 Geert Uytterhoeven wrote:
> >> On Mon, Nov 14, 2016 at 2:41 PM, Laurent Pinchart wrote:
> >>> On Monday 14 Nov 2016 14:35:26 Geert
Hi Rob,
Ping ?
On Monday 17 Oct 2016 15:42:56 Laurent Pinchart wrote:
> On Friday 14 Oct 2016 07:40:14 Rob Herring wrote:
> > On Sun, Oct 9, 2016 at 11:33 AM, Laurent Pinchart wrote:
> >> On Saturday 08 Oct 2016 20:29:39 Rob Herring wrote:
> >>> On Tue, Oct 04, 2016 at 07:23:29PM +0300, Laurent
From: Kieran Bingham
Hi Geert,
The following changes since commit 8bc55e5947b58dee3c8b126d7c303991ae0db130:
tty: serial_core: Fix serial console crash on port shutdown (2016-10-25
13:53:49 +0200)
are available in the git repository at:
From: Kieran Bingham
Hi Geert,
The following changes since commit 8bc55e5947b58dee3c8b126d7c303991ae0db130:
tty: serial_core: Fix serial console crash on port shutdown (2016-10-25
13:53:49 +0200)
are available in the git repository at:
Hi Rob,
On Mon, Nov 14, 2016 at 8:52 PM, Rob Herring wrote:
> On Thu, Nov 10, 2016 at 11:22:20AM +0200, Laurent Pinchart wrote:
>> On Wednesday 09 Nov 2016 15:44:44 Ramesh Shanmugasundaram wrote:
>> > --- /dev/null
>> > +++
On Thu, Nov 10, 2016 at 11:22:20AM +0200, Laurent Pinchart wrote:
> Hi Ramesh,
>
> Thank you for the patch.
>
> On Wednesday 09 Nov 2016 15:44:44 Ramesh Shanmugasundaram wrote:
> > This patch adds Digital Radio Interface (DRIF) support to R-Car Gen3 SoCs.
> > The driver exposes each instance of
Hi Laurent,
On Mon, Nov 14, 2016 at 5:44 PM, Laurent Pinchart
wrote:
> On Monday 14 Nov 2016 14:47:00 Geert Uytterhoeven wrote:
>> On Mon, Nov 14, 2016 at 2:41 PM, Laurent Pinchart wrote:
>> > On Monday 14 Nov 2016 14:35:26 Geert Uytterhoeven wrote:
>> >> The
On Wed, Nov 09, 2016 at 03:44:41PM +, Ramesh Shanmugasundaram wrote:
> This patch adds driver support for MAX2175 chip. This is Maxim
> Integrated's RF to Bits tuner front end chip designed for software-defined
> radio solutions. This driver exposes the tuner as a sub-device instance
> with
Add a device node for the Product Register, which provides SoC product
and revision information.
Signed-off-by: Geert Uytterhoeven
---
v3:
- Add to posted series,
v2:
- New.
---
arch/arm/boot/dts/r8a7791.dtsi | 5 +
1 file changed, 5 insertions(+)
diff --git
Add a device node for the Product Register, which provides SoC product
and revision information.
Signed-off-by: Geert Uytterhoeven
---
v3:
- Add to posted series,
v2:
- New.
---
arch/arm/boot/dts/r8a7792.dtsi | 5 +
1 file changed, 5 insertions(+)
diff --git
Add a device node for the Product Register, which provides SoC product
and revision information.
Signed-off-by: Geert Uytterhoeven
---
v3:
- No changes,
v2:
- New.
---
arch/arm64/boot/dts/renesas/r8a7795.dtsi | 5 +
1 file changed, 5 insertions(+)
diff --git
Identify the SoC type and revision, and register this information with
the SoC bus, so it is available under /sys/devices/soc0/, and can be
checked where needed using soc_device_match().
Identification is done using the Product Register or Common Chip Code
Register, as declared in DT (PRR only
Add a device node for the Product Register, which provides SoC product
and revision information.
Signed-off-by: Geert Uytterhoeven
---
v3:
- Add to posted series,
v2:
- New.
---
arch/arm/boot/dts/r8a7779.dtsi | 5 +
1 file changed, 5 insertions(+)
diff --git
Add device tree binding documentation for the Product Register (PRR),
which provides product and revision information on most Renesas ARM
SoCs.
Signed-off-by: Geert Uytterhoeven
Acked-by: Rob Herring
---
v3:
- Add Acked-by,
- Drop "renesas,cccr", as
Add a device node for the Product Register, which provides SoC product
and revision information.
Signed-off-by: Geert Uytterhoeven
---
v3:
- Add to posted series,
v2:
- New.
---
arch/arm/boot/dts/r8a7793.dtsi | 5 +
1 file changed, 5 insertions(+)
diff --git
Add a device node for the Product Register, which provides SoC product
and revision information.
Signed-off-by: Geert Uytterhoeven
---
v3:
- Add to posted series,
v2:
- New.
---
arch/arm/boot/dts/r8a7794.dtsi | 5 +
1 file changed, 5 insertions(+)
diff --git
Add a device node for the Product Register, which provides SoC product
and revision information.
Signed-off-by: Geert Uytterhoeven
---
v3:
- Add to posted series,
v2:
- New.
---
arch/arm/boot/dts/r8a7790.dtsi | 5 +
1 file changed, 5 insertions(+)
diff --git
Core soc_device_match() infrastructure, available from signed tag
soc-device-match-tag1 in
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers.git,
- Tag renesas-devel-20161114-v4.9-rc5 in Simon's renesas repository.
Tested on (machine, family, soc_id, optional revision)
Add a device node for the Product Register, which provides SoC product
and revision information.
Signed-off-by: Geert Uytterhoeven
---
v3:
- Drop CCCR, as it is not a lone register, but part of the HPB/APB
block,
v2:
- New.
---
arch/arm/boot/dts/r8a73a4.dtsi |
Add a device node for the Product Register, which provides SoC product
and revision information.
Signed-off-by: Geert Uytterhoeven
---
v3:
- Add to posted series,
v2:
- New.
---
arch/arm64/boot/dts/renesas/r8a7796.dtsi | 5 +
1 file changed, 5 insertions(+)
On 11/14/2016 05:20 PM, Ramesh Shanmugasundaram wrote:
> Hi Hans,
>
> Thanks for the review comments.
>
>> Subject: Re: [PATCH 3/5] media: Add new SDR formats SC16, SC18 & SC20
>>
>> On 11/09/2016 04:44 PM, Ramesh Shanmugasundaram wrote:
>>> This patch adds support for the three new SDR formats.
Hi Geert,
On Monday 14 Nov 2016 14:47:00 Geert Uytterhoeven wrote:
> On Mon, Nov 14, 2016 at 2:41 PM, Laurent Pinchart wrote:
> > On Monday 14 Nov 2016 14:35:26 Geert Uytterhoeven wrote:
> >> The main reason I haven't sent out a similar series yet is because the
> >> GPIOs used for the 3 push
From: Koji Matsuoka
The VSL and HSL bits in the DSMR register set the corresponding
horizontal and vertical sync signal polarity to active high. The code
got it the wrong way around, fix it.
Signed-off-by: Koji Matsuoka
Signed-off-by:
Hello,
This series contains four fixes for the R-Car DU driver, all backported or
inspired by the R-Car Gen3 BSP.
Please see individual patches for details.
Koji Matsuoka (3):
drm: rcar-du: Fix display timing controller parameter
drm: rcar-du: Fix H/V sync signal polarity configuration
From: Koji Matsuoka
According to the latest revision of the datasheet, the LVDS I/O pins
must be enabled before starting the PLL. Fix it.
Signed-off-by: Koji Matsuoka
Signed-off-by: Laurent Pinchart
From: Koji Matsuoka
There is a bug in the setting of the DES (Display Enable Signal)
register. This current setting occurs 1 dot left shift. The DES
register should be set minus one value about the specifying value
with H/W specification. This patch corrects it.
Dot clock routing is setup through different registers depending on the
DU generation. The code has been designed for Gen2 and hasn't been
updated since. This works thanks to good reset default value, but isn't
very safe. Fix it.
Signed-off-by: Laurent Pinchart
Hi Hans,
Thanks for the review comments.
> Subject: Re: [PATCH 3/5] media: Add new SDR formats SC16, SC18 & SC20
>
> On 11/09/2016 04:44 PM, Ramesh Shanmugasundaram wrote:
> > This patch adds support for the three new SDR formats. These formats
> > were prefixed with "sliced" indicating I data
Hi Hans,
Thanks for the review comments.
> Subject: Re: [PATCH 5/5] media: platform: rcar_drif: Add DRIF support
>
> On 11/09/2016 04:44 PM, Ramesh Shanmugasundaram wrote:
> > This patch adds Digital Radio Interface (DRIF) support to R-Car Gen3
> SoCs.
> > The driver exposes each instance of
On Sat, Nov 05, 2016 at 01:02:25AM +0300, Sergei Shtylyov wrote:
> Document the SK-RZG1E device tree bindings, listing it as a supported board.
>
> This allows to use checkpatch.pl to validate .dts files referring to the
> SK-RZG1E board.
>
> Signed-off-by: Sergei Shtylyov
On Sat, Nov 05, 2016 at 12:49:55AM +0300, Sergei Shtylyov wrote:
> Add minimal support for the RZ/G1E (R8A7745) SoC.
>
> Signed-off-by: Sergei Shtylyov
> Reviewed-by: Geert Uytterhoeven
>
> ---
> Changes in version 2:
> - added
Hello Laurent, Antti, Hans,
> Subject: Re: [RFC 5/5] doc_rst: media: New SDR formats SC16, SC18 & SC20
>
> On 11/11/2016 02:57 PM, Laurent Pinchart wrote:
> > Hi Hans,
> >
> > On Friday 11 Nov 2016 14:53:58 Hans Verkuil wrote:
> >> On 11/10/2016 09:08 AM, Laurent Pinchart wrote:
> >>> Antti,
On Sat, Nov 05, 2016 at 12:46:13AM +0300, Sergei Shtylyov wrote:
> Add support for RZ/G1E (R8A7745) SoC power areas to the R-Car SYSC driver.
>
> Based on the original (and large) patch by Dmitry Shifrin
> .
>
> Signed-off-by: Sergei Shtylyov
Hi Hans,
Thank you for the review comments.
> On 11/09/2016 04:44 PM, Ramesh Shanmugasundaram wrote:
> > This patch adds driver support for MAX2175 chip. This is Maxim
> > Integrated's RF to Bits tuner front end chip designed for
> > software-defined radio solutions. This driver exposes the
On Mon, Nov 14, 2016 at 11:16 AM, Geert Uytterhoeven
wrote:
> Hi Uli,
>
> On Fri, Nov 11, 2016 at 6:07 PM, Ulrich Hecht
> wrote:
>> This implements HDMI output support for the Renesas R8A7795 (H3) SoC and
>> Salvator-X board. It is based on
Hi Laurent,
On Mon, Nov 14, 2016 at 2:41 PM, Laurent Pinchart
wrote:
> On Monday 14 Nov 2016 14:35:26 Geert Uytterhoeven wrote:
>> The main reason I haven't sent out a similar series yet is because the GPIOs
>> used for the 3 push buttons are shared with the 3
Hi Geert,
On Monday 14 Nov 2016 14:35:26 Geert Uytterhoeven wrote:
> On Mon, Nov 14, 2016 at 2:07 PM, Laurent Pinchart wrote:
> > This simple series adds GPIO keys support to both the H3- and M3-W-based
> > Salvator-X boards. Please see individual patches for details.
>
> Thanks for your series!
Hi Laurent,
On Mon, Nov 14, 2016 at 2:07 PM, Laurent Pinchart
wrote:
> This simple series adds GPIO keys support to both the H3- and M3-W-based
> Salvator-X boards. Please see individual patches for details.
Thanks for your series!
The main reason I
The Salvator-X board as a 4 lines DIP switch and 3 push buttons
connected to SoC GPIOs, meant to be used as general-purpose test keys.
Add a corresponding node in DT, mapping (semi-randomly) the DIP switch
to keys 1-4 and the push buttons to keys A-C.
Signed-off-by: Laurent Pinchart
The Salvator-X board as a 4 lines DIP switch and 3 push buttons
connected to SoC GPIOs, meant to be used as general-purpose test keys.
Add a corresponding node in DT, mapping (semi-randomly) the DIP switch
to keys 1-4 and the push buttons to keys A-C.
Signed-off-by: Laurent Pinchart
Hello,
This simple series adds GPIO keys support to both the H3- and M3-W-based
Salvator-X boards. Please see individual patches for details.
Laurent Pinchart (2):
arm64: dts: r8a7795: salvator-x: Add GPIO keys support
arm64: dts: r8a7796: salvator-x: Add GPIO keys support
On Sun, Nov 13, 2016 at 03:29:12PM +0100, Wolfram Sang wrote:
> We surely have SDIO support by now :)
>
> Signed-off-by: Wolfram Sang
Reviewed-by: Simon Horman
On Sun, Nov 13, 2016 at 03:29:11PM +0100, Wolfram Sang wrote:
> Commit 7729c7a232a953 ("mmc: tmio: Provide separate interrupt handlers")
> refactored the sdio irq handler and wrongly used the mask for SD irqs,
> not for SDIO irqs. This doesn't really matter in practice because both
> values keep
On Monday, November 14, 2016 11:51:15 AM CET Geert Uytterhoeven wrote:
> On Thu, Nov 10, 2016 at 12:37 PM, Arnd Bergmann wrote:
> > On Thursday, November 10, 2016 11:19:20 AM CET Geert Uytterhoeven wrote:
> >> On Wed, Nov 9, 2016 at 5:55 PM, Arnd Bergmann wrote:
>
Hi Arnd,
On Thu, Nov 10, 2016 at 12:37 PM, Arnd Bergmann wrote:
> On Thursday, November 10, 2016 11:19:20 AM CET Geert Uytterhoeven wrote:
>> On Wed, Nov 9, 2016 at 5:55 PM, Arnd Bergmann wrote:
>> > On Monday, October 31, 2016 12:30:55 PM CET Geert Uytterhoeven
On Mon, Nov 14, 2016 at 10:16:52AM +0100, Greg KH wrote:
> On Mon, Nov 14, 2016 at 10:03:44AM +0100, Simon Horman wrote:
> > Hi,
> >
> > ** This series is for informational purposes only! **
> >
> > This series is comprised of backports to v4.9-rc3 of the following
> > components to their
Hi Uli,
On Fri, Nov 11, 2016 at 6:07 PM, Ulrich Hecht
wrote:
> This implements HDMI output support for the Renesas R8A7795 (H3) SoC and
> Salvator-X board. It is based on mainline v4.9-rc4 and depends on Geert's
> "[PATCH v2 0/7] soc: renesas: Identify SoC and
On Sat, Nov 12, 2016 at 5:04 PM, Niklas Söderlund
wrote:
> pin it dose not know about.
I'll fix up s/dose/does/ when applying ;-)
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 --
On Sat, Nov 12, 2016 at 5:04 PM, Niklas Söderlund
wrote:
> The last else statement is missing braces and there indentation level
> can be reduced.
>
> Suggested-by: Laurent Pinchart
> Signed-off-by: Niklas Söderlund
On Mon, Nov 14, 2016 at 10:03:44AM +0100, Simon Horman wrote:
> Hi,
>
> ** This series is for informational purposes only! **
>
> This series is comprised of backports to v4.9-rc3 of the following
> components to their standard as of next-20161028:
>
> * gen3 (ARM64 SoC Integration)
>
Hi,
** This series is for informational purposes only! **
This series is comprised of backports to v4.9-rc3 of the following
components to their standard as of next-20161028:
* gen3 (ARM64 SoC Integration)
* mach-shmobile (ARM32 SoC Integration)
* rcar-du (driver)
* rcar-snd
Hi Stephen,
On Fri, Nov 11, 2016 at 12:35 AM, Stephen Boyd wrote:
> On 11/07, Geert Uytterhoeven wrote:
>> clk: renesas: Updates for v4.10 (take one)
>>
>> - SYS-DMAC, (H)SCIF, I2C, DRIF, and graphics related clocks for R-Car
>> M3-W,
>> - Minor fixes and cleanups.
On Sat, Nov 12, 2016 at 1:29 PM, Niklas Söderlund
wrote:
> +Example:
> +
> +/* SoC properties */
> +
> +csi20: csi2@fea8 {
> +compatible = "renesas,r8a7795-csi2";
7795
> +reg = <0 0xfea8 0 0x1>;
> +
61 matches
Mail list logo