From: Kuninori Morimoto
commit 1f8754d4daea5f ("ASoC: rsnd: don't call free_irq() on
Parent SSI") fixed Parent SSI duplicate free_irq().
But on Renesas Sound, not only Parent SSI but also Multi SSI
have same issue.
This patch avoid duplicate free_irq() if it was not pure SSI.
Fixes: 1f8754d4dae
From: Kuninori Morimoto
R-Car Gen3 sound device can use TDM 16ch, but its usage is very
limited. It is not yet supported.
Let's remove unexpected/unsupported channel settings for now.
This patch makes xx_ADINR register settings sanity without
runtime check.
R-Car Gen3 datasheet
40.4.7 Note on
> As it is an "RFT" I'm happy to apply it if you repost
> it or otherwise indicate that is what you would like to happen.
As discussed in a chat, I tried SDR104 with my SDIO WiFi cards:
H3:
- one slot worked flawlessly
- one slot could load FW but failed to read status
(with SDR50: both slots wo
On Tue, 8 Aug 2017, Ard Biesheuvel wrote:
> On 8 August 2017 at 16:10, Nicolas Pitre wrote:
> > On Sat, 5 Aug 2017, Ard Biesheuvel wrote:
> >
> >> Like arm64, ARM supports position independent code sequences that
> >> produce symbol references with a greater reach than the ordinary
> >> adr/ldr i
On 8 August 2017 at 16:10, Nicolas Pitre wrote:
> On Sat, 5 Aug 2017, Ard Biesheuvel wrote:
>
>> Like arm64, ARM supports position independent code sequences that
>> produce symbol references with a greater reach than the ordinary
>> adr/ldr instructions.
>>
>> Currently, we use open coded instruc
On Sat, 5 Aug 2017, Ard Biesheuvel wrote:
> Like arm64, ARM supports position independent code sequences that
> produce symbol references with a greater reach than the ordinary
> adr/ldr instructions.
>
> Currently, we use open coded instruction sequences involving literals
> and arithmetic opera
+ linux-renesas-soc
> From: Fabrizio Castro [mailto:fabrizio.cas...@bp.renesas.com]
> Sent: 08 August 2017 13:28
>
> Document the iW-RainboW-G22D device tree bindings.
> It is just a placeholder for the time being, the actual implementation is not
> available yet.
>
> Signed-off-by: Fabrizio Cas
+ linux-renesas-soc
> From: Fabrizio Castro [mailto:fabrizio.cas...@bp.renesas.com]
> Sent: 08 August 2017 13:28
>
> Document the iW-RainboW-G22M-SM SODIMM System on Module device tree
> bindings. It is just a placeholder for the time being, the actual
> implementation
> is not available yet.
>
+ linux-renesas-soc
> From: Fabrizio Castro [mailto:fabrizio.cas...@bp.renesas.com]
> Sent: 08 August 2017 13:28
> To: robh...@kernel.org; mark.rutl...@arm.com
>
> Hello,
>
> This series aims to add the documentation for the device tree bindings of the
> iWave iW-RainboW-G22D-SODIMM RZ/G1E SODIM
This series aims to add BQ32000 RTC support for iWave RZ/G1M board.
This series has been tested against Linux-next tag 20170727 and renesas-dev
branch.
This patch series depends on
https://www.spinics.net/lists/arm-kernel/msg599220.html
Biju Das (2):
ARM: dts: iwg20d-q7: Add RTC support
ARM
Define the iWave RainboW-G20D-Qseven board dependent part of the
RTC device node.
Signed-off-by: Biju Das
---
arch/arm/boot/dts/r8a7743-iwg20d-q7.dts | 18 ++
1 file changed, 18 insertions(+)
diff --git a/arch/arm/boot/dts/r8a7743-iwg20d-q7.dts
b/arch/arm/boot/dts/r8a7743-iwg20
The iWave RZ/G1M Q7 SOM supports RTC (TI BQ32000).
To increase hardware support enable the driver in the
shmobile_defconfig multiplatform configuration.
Signed-off-by: Biju Das
---
arch/arm/configs/shmobile_defconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm/configs/shmobile_d
Signed-off-by: Biju Das
---
This patch has been tested against Linux-next tag 20170727 and renesas-dev
branch.
This patch depends on https://www.spinics.net/lists/arm-kernel/msg599220.html
arch/arm/boot/dts/r8a7743.dtsi | 55 ++
1 file changed, 55 inserti
Document i2c Device Tree support for RZ/G1[ME]
(also known as r8a774[35]) SoCs. They are compatible with
R-Car Gen2 SoC family. No driver change is required as the
initialisation sequence is currently the same as for the
R-Car Gen2 fallback binding.
Signed-off-by: Biju Das
---
Documentation/devi
On Tue, Aug 08, 2017 at 12:20:31PM +0100, Biju Das wrote:
> Document i2c Device Tree support for RZ/G1[ME]
> (also known as r8aA774[35]) SoCs. They are compatible with
> R-Car Gen2 SoC family.
>
> Signed-off-by: Biju Das
Looks good to me, yet I'd like an ack from Simon who is currently
working o
Add the I2C[0-5] devices to the r8a7743 device tree.
Signed-off-by: Biju Das
---
This patch has been tested against Linux-next tag 20170727 and renesas-dev
branch.
This patch depends on
https://www.mail-archive.com/linux-renesas-soc@vger.kernel.org/msg17008.html
arch/arm/boot/dts/r8a7743.dtsi
Document i2c Device Tree support for RZ/G1[ME]
(also known as r8aA774[35]) SoCs. They are compatible with
R-Car Gen2 SoC family.
Signed-off-by: Biju Das
---
Documentation/devicetree/bindings/i2c/i2c-rcar.txt | 5 -
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/Documentation/de
Add DT nodes for the Advanced Power Management Unit (APMU) and the
second CPU core. Use the enable-method to point out that the APMU
should be used for SMP support.
Signed-off-by: Biju Das
---
arch/arm/boot/dts/r8a7743.dtsi | 16
1 file changed, 16 insertions(+)
diff --git a/a
Document APMU and SMP enable method for RZ/G1M
(also known as r8a7743) SoC.
Signed-off-by: Biju Das
---
Documentation/devicetree/bindings/power/renesas,apmu.txt | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/power/renesas,apmu.txt
b/Docum
Add needed information inside CPU0 for the generic cpufreq-cpu0 driver.
- clock-latency = 300 us
Approximate worst-case latency to do clock transition for every
OPPs. Using an arbitrary safe value similar to r8a7791(R-Car M2) Soc.
- operating-points = < kHz - uV >
List of 6 operating points. All
This series aims to add SMP support for r8a7743 SoC.
This series has been tested against Linux-next tag 20170727
and renesas-dev branch.
Biju Das (3):
dt-bindings: apmu: Document r8a7743 support
ARM: dts: r8a7743: Add APMU node and second CPU core
ARM: dts: r8a7743: Add OPP table for freque
The patch
ASoC: rsnd: move rsnd_ssi_config_init() execute condition into it.
has been applied to the asoc tree at
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git
All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24
The patch
ASoC: rsnd: control SSICR::EN correctly
has been applied to the asoc tree at
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git
All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus d
The patch
ASoC: rsnd: rsnd_ssi_can_output_clk() macro
has been applied to the asoc tree at
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git
All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Lin
Hi Simon,
On Tue, Aug 8, 2017 at 5:39 PM, Simon Horman wrote:
> Use newly added R-Car GPIO Gen 1, 2 and 3 fallback compat strings in place
> of now deprecated non-generation specific R-Car GPIO fallback compat string
> in the DT of Renesas ARM and arm64 based SoCs.
>
> This should have no run-tim
Hi Simon,
On Tue, Aug 8, 2017 at 5:54 PM, Simon Horman wrote:
> Use newly added R-Car GPIO Gen3 fallback compat string
> in the DT of the r8a7795 SoC.
>
> This should have no run-time effect as the driver matches against
> the per-SoC compat string before the fallback compat string is considered.
On 07/25/2017 10:01 AM, Daniel Vetter wrote:
> It's dead code, the core handles all this directly now. This also
> allows us to unexport drm_atomic_helper_plane_set_property.
>
> Signed-off-by: Daniel Vetter
[...]
> drivers/gpu/drm/sti/sti_cursor.c| 1 -
> drivers/gpu/drm/
Use newly added R-Car GPIO Gen3 fallback compat string
in the DT of the r8a7795 SoC.
This should have no run-time effect as the driver matches against
the per-SoC compat string before the fallback compat string is considered.
Signed-off-by: Simon Horman
---
arch/arm64/boot/dts/renesas/r8a7795.d
Use newly added R-Car GPIO Gen2 fallback compat string
in the DT of the r8a7791 SoC.
This should have no run-time effect as the driver matches against
the per-SoC compat string before the fallback compat string is considered.
Signed-off-by: Simon Horman
---
arch/arm/boot/dts/r8a7791.dtsi | 4 ++
Use newly added R-Car SATA Gen 2 and 3 fallback compat strings.
This should have no run-time effect as the driver matches against the
per-SoC compat string before considering the fallback compat string.
Based on renesas-devel-20170807-v4.13-rc4
Simon Horman (3):
ARM: dts: r8a7790: Use R-Car GP
Use newly added R-Car GPIO Gen2 fallback compat string
in the DT of the r8a7790 SoC.
This should have no run-time effect as the driver matches against
the per-SoC compat string before the fallback compat string is considered.
Signed-off-by: Simon Horman
---
arch/arm/boot/dts/r8a7790.dtsi | 4 ++
Use newly added R-Car GPIO Gen3 fallback compat string
in place of now deprecated non-generation specific
R-Car GPIO fallback compat string in the DT of the r8a7795 SoC.
This should have no run-time effect as the driver matches against
the per-SoC compat string before considering the fallback comp
Use newly added R-Car GPIO Gen2 fallback compat string
in place of now deprecated non-generation specific
R-Car GPIO fallback compat string in the DT of the r8a7794 SoC.
This should have no run-time effect as the driver matches against
the per-SoC compat string before considering the fallback comp
Use newly added R-Car GPIO Gen2 fallback compat string
in place of now deprecated non-generation specific
R-Car GPIO fallback compat string in the DT of the r8a7793 SoC.
This should have no run-time effect as the driver matches against
the per-SoC compat string before considering the fallback comp
Use newly added R-Car GPIO Gen3 fallback compat string
in place of now deprecated non-generation specific
R-Car GPIO fallback compat string in the DT of the r8a7796 SoC.
This should have no run-time effect as the driver matches against
the per-SoC compat string before considering the fallback comp
Use newly added R-Car GPIO Gen2 fallback compat string
in place of now deprecated non-generation specific
R-Car GPIO fallback compat string in the DT of the r8a7743 SoC.
This should have no run-time effect as the driver matches against
the per-SoC compat string before considering the fallback comp
Use newly added R-Car GPIO Gen1 fallback compat string
in place of now deprecated non-generation specific
R-Car GPIO fallback compat string in DT of r8a7779 SoC.
This should have no run-time effect as the driver matches against
the per-SoC compat string before considering the fallback compat strin
Use newly added R-Car GPIO Gen 1, 2 and 3 fallback compat strings in place
of now deprecated non-generation specific R-Car GPIO fallback compat string
in the DT of Renesas ARM and arm64 based SoCs.
This should have no run-time effect as the driver matches against the
per-SoC compat string before c
Use newly added R-Car GPIO Gen2 fallback compat string
in place of now deprecated non-generation specific
R-Car GPIO fallback compat string in the DT of the r8a7790 SoC.
This should have no run-time effect as the driver matches against
the per-SoC compat string before considering the fallback comp
Use newly added R-Car GPIO Gen2 fallback compat string
in place of now deprecated non-generation specific
R-Car GPIO fallback compat string in the DT of the r8a7791 SoC.
This should have no run-time effect as the driver matches against
the per-SoC compat string before considering the fallback comp
Use newly added R-Car GPIO Gen1 fallback compat string
in place of now deprecated non-generation specific
R-Car GPIO fallback compat string in DT of r8a7778 SoC.
This should have no run-time effect as the driver matches against
the per-SoC compat string before considering the fallback compat strin
Use newly added R-Car GPIO Gen2 fallback compat string
in place of now deprecated non-generation specific
R-Car GPIO fallback compat string in the DT of the r8a7792 SoC.
This should have no run-time effect as the driver matches against
the per-SoC compat string before considering the fallback comp
On Wed, Aug 02, 2017 at 02:20:59PM +0200, Simon Horman wrote:
> On Mon, Jul 31, 2017 at 07:40:23PM +0300, Sergei Shtylyov wrote:
> > On 07/31/2017 06:03 PM, Simon Horman wrote:
> >
> > >From: Kazuya Mizuguchi
> > >
> > >This patch adds the "companion" property in the EHCI ch0, ch1 and
> > >ch2 no
Fixes: 4dad6dcdae7b ("arm64: dts: renesas: r8a7795: add usb2.0 host ch3 device
nodes")
Fixes: 1c422b4c501e ("arm64: dts: renesas: r8a7795: Add usb companion property
in EHCI")
Signed-off-by: Simon Horman
---
arch/arm64/boot/dts/renesas/r8a7795.dtsi | 8
1 file changed, 4 insertions(+),
44 matches
Mail list logo