Hi Petre-san,
> From: Petre Pircalabu
> Sent: Friday, May 19, 2017 8:55 AM
>
> Hi Shimoda-san,
>
> I just saw that you patch predates mine. I will drop my version and
> integrate yours.
I got it!
Best regards,
Yoshihiro Shimoda
> Many thanks for for your support,
> Petre
Hi,
> From: Yoshihiro Shimoda
> Sent: Wednesday, May 24, 2017 9:04 PM
>
> The USB 3.0 PHY modules of R-Car Gen3 SoCs have:
> - Spread spectrum clock (ssc).
> - Using USB 2.0 EXTAL clock instead of USB 3.0 clock.
> - Enabling VBUS detection for usb3.0 peripheral.
>
&g
The USB 3.0 PHY modules of R-Car Gen3 SoCs have:
- Spread spectrum clock (ssc).
- Using USB 2.0 EXTAL clock instead of USB 3.0 clock.
- Enabling VBUS detection for usb3.0 peripheral.
So, this driver supports these features.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda...@renesas.
The USB 3.0 PHY modules of R-Car Gen3 SoCs have:
- Spread spectrum clock (ssc).
- Using USB 2.0 EXTAL clock instead of USB 3.0 clock.
- Enabling VBUS detection for usb3.0 peripheral.
So, this driver supports these features.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda...@renesas.
Hi Geert-san,
> From: Geert Uytterhoeven
> Sent: Wednesday, May 24, 2017 9:39 PM
>
> Hi Shimoda-san,
>
> On Wed, May 24, 2017 at 2:17 PM, Yoshihiro Shimoda
> <yoshihiro.shimoda...@renesas.com> wrote:
> > The USB 3.0 PHY modules of R-Car Gen3 SoCs have:
The USB 3.0 PHY modules of R-Car Gen3 SoCs have:
- Spread spectrum clock (ssc).
- Using USB 2.0 EXTAL clock instead of USB 3.0 clock.
- Enabling VBUS detection for usb3.0 peripheral.
So, this driver supports these features.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda...@renesas.
Hi,
> From: Felipe Balbi
> Sent: Friday, June 2, 2017 6:49 PM
>
> Hi,
>
> Yoshihiro Shimoda <yoshihiro.shimoda...@renesas.com> writes:
> > Hi Felipe,
> >
> >> -----Original Message-
> >> From: Yoshihiro Shimoda
> >> Sent: Wedn
The USB3.0 peripheral controller on R-Car SoCs has a dedicated DMAC.
The DMAC needs a "PRD table" in system memory and the DMAC can have
four PRD tables. This patch adds support for the DMAC.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda...@renesas.com>
---
This patch bas
USB 2.0 PHY of R-Car Gen3 can change the clock source from an oscillator
to an external clock via a register. So, this patch adds support
the clock source selector as a generic PHY driver.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda...@renesas.com>
---
This patch is based on the
Hi Geert-san,
> From: Geert Uytterhoeven
> Sent: Thursday, May 18, 2017 8:41 PM
>
> Hi Shimoda-san,
>
> On Thu, May 18, 2017 at 1:13 PM, Yoshihiro Shimoda
> <yoshihiro.shimoda...@renesas.com> wrote:
> >> >> +- reg: offset and length of the partia
Hi Kishon,
> From: Yoshihiro Shimoda
> Sent: Monday, May 29, 2017 7:42 PM
>
> The USB 3.0 PHY modules of R-Car Gen3 SoCs have:
> - Spread spectrum clock (ssc).
> - Using USB 2.0 EXTAL clock instead of USB 3.0 clock.
> - Enabling VBUS detection for usb3.0 peripheral.
R-Car USB 2.0 controller can change the clock source from an oscillator
to an external clock via a register. So, this patch adds support
the clock source selector as a clock driver.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda...@renesas.com>
---
This patch is based on the r
Hi Geert-san,
> From: Yoshihiro Shimoda
> Sent: Wednesday, August 30, 2017 10:07 PM
>
> Hi Geert-san,
>
> I'm sorry. I missed this email...
>
> > From: Geert Uytterhoeven
> > Sent: Wednesday, August 16, 2017 8:11 PM
> >
> > Hi Shimoda-san, Kihar
From: Takeshi Kihara <takeshi.kihara...@renesas.com>
Signed-off-by: Takeshi Kihara <takeshi.kihara...@renesas.com>
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda...@renesas.com>
---
Changes from v1:
- Rebase this patch on renesas-drivers' 2017-09-05 tag +
https://pa
nctrl: sh-pfc: r8a77995: Add USB2.0 host support"
Otherwise, USB2.0 PHY driver cannot be probed.
Yoshihiro Shimoda (4):
arm64: dts: renesas: r8a77995: Add USB2.0 PHY device node
arm64: dts: renesas: r8a77995: add USB2.0 Host (EHCI/OHCI) device node
arm64: dts: renesas: r8a77995: dra
This patch adds USB2.0 PHY device node for r8a77995.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda...@renesas.com>
---
arch/arm64/boot/dts/renesas/r8a77995.dtsi | 12
1 file changed, 12 insertions(+)
diff --git a/arch/arm64/boot/dts/renesas/r8a77995.dtsi
b/arch/arm6
This patch enables USB2.0 PHY for R-Car D3 draak board.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda...@renesas.com>
---
arch/arm64/boot/dts/renesas/r8a77995-draak.dts | 11 +++
1 file changed, 11 insertions(+)
diff --git a/arch/arm64/boot/dts/renesas/r8a77995-draak.dts
This patch adds USB2.0 Host (EHCI/OHCI) device node for r8a77995.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda...@renesas.com>
---
arch/arm64/boot/dts/renesas/r8a77995.dtsi | 25 +
1 file changed, 25 insertions(+)
diff --git a/arch/arm64/boot/dts/renesas/r8
This patch enables USB2.0 Host (EHCI/OHCI) for r8a77995.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda...@renesas.com>
---
arch/arm64/boot/dts/renesas/r8a77995-draak.dts | 8
1 file changed, 8 insertions(+)
diff --git a/arch/arm64/boot/dts/renesas/r8a77995-draak.dts
b/arch
Hi Simon-san,
> From: Simon Horman
> Sent: Friday, September 15, 2017 4:35 PM
>
> On Wed, Sep 13, 2017 at 11:58:47PM +0000, Yoshihiro Shimoda wrote:
> > Hi Geert-san,
> >
> > > From: Geert Uytterhoeven
> > > Sent: Wednesday, September 13
This patch adds USB3.0 peripheral channel 0 device node for r8a7796.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda...@renesas.com>
---
arch/arm64/boot/dts/renesas/r8a7796.dtsi | 11 +++
1 file changed, 11 insertions(+)
diff --git a/arch/arm64/boot/dts/renesas/r8a7796.dtsi
This patch adds USB3.0 peripheral channel 0 device node for r8a7795.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda...@renesas.com>
---
arch/arm64/boot/dts/renesas/r8a7795.dtsi | 11 +++
1 file changed, 11 insertions(+)
diff --git a/arch/arm64/boot/dts/renesas/r8a7795.dtsi
cable
and after usb3.0 host is running, but I think it's a special use case.
Yoshihiro Shimoda (2):
arm64: dts: renesas: r8a7795: add USB3.0 peripheral device node
arm64: dts: renesas: r8a7796: add USB3.0 peripheral device node
arch/arm64/boot/dts/renesas/r8a7795.dtsi | 11 +++
arch
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda...@renesas.com>
---
About AVB'0', I don't get any feedback from HW team... So, I'd like to follow
the current PFC section in the manual.
Changes from v1:
- Changes the groups like other SoCs (r8a7795 and r8a7796).
drivers/pinctrl/
Hello!
> From: Sergei Shtylyov
> Sent: Thursday, September 14, 2017 1:02 AM
>
> Hello!
>
> On 09/13/2017 03:17 PM, Yoshihiro Shimoda wrote:
>
> > Add a new compatible string for the R8A77995 (R-Car D3) RAVB.
> >
> > Signed-off-by: Yoshihiro Sh
Add a new compatible string for the R8A77995 (R-Car D3) RAVB.
Acked-by: Geert Uytterhoeven <geert+rene...@glider.be>
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda...@renesas.com>
---
Changes from v1:
- Based on r8a77970 patch.
https://marc.info/?l=linux-renesas-soc=150
ways a valid match.
>
> Signed-off-by: Geert Uytterhoeven <geert+rene...@glider.be>
Thank you for the patch!
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda...@renesas.com>
Best regards,
Yoshihiro Shimoda
Hi,
> From: Geert Uytterhoeven, Sent: Wednesday, October 4, 2017 9:25 PM
>
> Use the of_device_get_match_data() helper instead of open coding.
>
> Signed-off-by: Geert Uytterhoeven <geert+rene...@glider.be>
Thank you for the patch!
Reviewed-by: Yoshihiro Shimo
Hi,
> From: Geert Uytterhoeven, Sent: Wednesday, October 4, 2017 9:27 PM
>
> Use the of_device_get_match_data() helper instead of open coding.
>
> Signed-off-by: Geert Uytterhoeven <geert+rene...@glider.be>
Thank you for the patch!
Reviewed-by: Yoshihiro Shimo
Add device tree bindings for the PWM controller found on R-Car D3 SoCs.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda...@renesas.com>
---
Documentation/devicetree/bindings/pwm/renesas,pwm-rcar.txt | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindin
This patch set is based on the renesas.git /
renesas-devel-20171002-v4.14-rc3 tag.
Yoshihiro Shimoda (3):
arm64: dts: renesas: salvator-common: drop "avb_phy_int" from avb_pins
arm64: dts: renesas: ulcb: drop "avb_phy_int" from avb_pins
arm64: dts: renesas: r
t;arm64: dts: renesas: r8a77995: draak: enable EthernetAVB")
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda...@renesas.com>
---
arch/arm64/boot/dts/renesas/r8a77995-draak.dts | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/renesas/r8a77995-draak.dt
dts: ulcb: Set drive-strength for ravb pins")
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda...@renesas.com>
---
arch/arm64/boot/dts/renesas/ulcb.dtsi | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/renesas/ulcb.dtsi
b/arch/arm64/boot/dts/renesas/
: r8a7795: salvator-x: Set drive-strength for
ravb pins")
Fixes: 4903987033be ("arm64: dts: r8a7796: salvator-x: Set drive-strength for
ravb pins")
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda...@renesas.com>
---
arch/arm64/boot/dts/renesas/salvator-common.dtsi | 3 +--
1
Hi Geert-san,
> -Original Message-
> From: Geert Uytterhoeven
> Sent: Monday, October 2, 2017 6:20 PM
>
> Hi Shimoda-san,
>
> On Mon, Oct 2, 2017 at 11:14 AM, Yoshihiro Shimoda
> <yoshihiro.shimoda...@renesas.com> wrote:
> >> -Original
This patch adds PWM device nodes for r8a77995.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda...@renesas.com>
---
arch/arm64/boot/dts/renesas/r8a77995.dtsi | 40 +++
1 file changed, 40 insertions(+)
diff --git a/arch/arm64/boot/dts/renesas/r8a77995.dtsi
This patch enables PWM channel 0 and 1 on the draak. Each channel
connects to LTC2644 for brightness control.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda...@renesas.com>
---
arch/arm64/boot/dts/renesas/r8a77995-draak.dts | 24
1 file changed, 24 inse
From: Takeshi Kihara <takeshi.kihara...@renesas.com>
This patch adds support for PWM on r8a77995.
Signed-off-by: Takeshi Kihara <takeshi.kihara...@renesas.com>
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda...@renesas.com>
---
This patch is based on the renesas-dri
Hi Simon-san,
Thank you for the comments!
> From: Simon Horman, Sent: Tuesday, October 10, 2017 4:46 PM
>
> On Tue, Oct 10, 2017 at 02:58:28PM +0900, Yoshihiro Shimoda wrote:
> > This patch cleanups the role_{store,show}() and replaces the local
> > "bool"
has dr_mode property or
not. If it has 'dr_mode = "otg";', this driver enables otg capability.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda...@renesas.com>
Reviewed-by: Simon Horman <horms+rene...@verge.net.au>
---
drivers/phy/renesas/phy-rcar-gen3-usb2.c | 10 +++
by".
Changes from v2:
- Revise the commit log ("SoCs" is not third-person singular present).
Changes from v1:
- Revise typo "wronly" to "wrongly".
- Remove RCAR_GEN3_PHY_HAS_DEDICATED_PINS from generic gen3 entry in
patch 3/4
- Remove the driver change from
he code.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda...@renesas.com>
Reviewed-by: Simon Horman <horms+rene...@verge.net.au>
---
drivers/phy/renesas/phy-rcar-gen3-usb2.c | 31 +--
1 file changed, 21 insertions(+), 10 deletions(-)
diff --git a/drivers/phy/renesas
This patch modifies the role_store() to use "enum phy_mode" instead
of the local "bool" for host/device mode selection.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda...@renesas.com>
---
drivers/phy/renesas/phy-rcar-gen3-usb2.c | 29 ++-
This patch adds binding for r8a77995 (R-Car D3). Since r8a77995 doesn't
have dedicated pins (ID, VBUS), this will match against the generic
fallback on R-Car D3.
For now, this driver doesn't support usb role swap for r8a77995.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda...@renesas.
m Chen-Yu Tsai (for phy-sun4i-usb.c & extcon-axp288.c)
> - Add acked-by from Charles Keepax (for drivers/extcon/extcon-arizona.c)
> - Add acked-by from Lee Jones (fo include/linux/mfd/palmas.h)
< snip >
> drivers/phy/renesas/phy-rcar-gen3-usb2.c | 2 +-
and
< snip >
> drivers/usb/gadget/udc/renesas_usb3.c | 2 +-
Acked-by: Yoshihiro Shimoda <yoshihiro.shimoda...@renesas.com>
Best regards,
Yoshihiro Shimoda
; So seems we have two issues?
>
> a) swiotlb_tbl_map_single() can't handle 524288 bytes
>
> and
>
> b) failing swiotlb_tbl_map_single() results in a kernel crash
>
>
> Now, I'm not sure whom to address both to? Is it an issue of
> renesas_sdhi_internal_dmac()
/patch/9982267/
The R-Car D3 patch is not applied into usb.git yet though...
Hi Felipe-san,
Could you resolve this conflict on your side?
Or, should this r8a7743/5 patch be rebased on the R-Car D3 patch?
When after resolved the conflict:
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda...@renesas.com>
Best regards,
Yoshihiro Shimoda
> When compatible with the generic version, nodes must list the
> --
> 1.9.1
Hi Kishon,
Would you review this patch set?
I checked this can apply your latest linux-phy.git / next branch (the commit id
= 415060b21f31).
Best regards,
Yoshihiro Shimoda
> -Original Message-
> From: Yoshihiro Shimoda
> Sent: Friday, September 1, 2017 11:41 AM
> To: k
e max_{req,seg}_size will be set to 256k bytes.
Reported-by: Dirk Behme <dirk.be...@de.bosch.com>
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda...@renesas.com>
---
drivers/mmc/host/renesas_sdhi_internal_dmac.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-
This patch set is based on mainline v4.14-rc5.
Yoshihiro Shimoda (2):
mmc: renesas_sdhi: fix swiotlb buffer is full
mmc: renesas_sdhi: fix kernel panic in _internal_dmac.c
drivers/mmc/host/renesas_sdhi_internal_dmac.c | 22 +-
1 file changed, 13 insertions(+), 9
s-sdhi: add support for R-Car Gen3 SDHI DMAC")
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda...@renesas.com>
---
drivers/mmc/host/renesas_sdhi_internal_dmac.c | 17 ++---
1 file changed, 10 insertions(+), 7 deletions(-)
diff --git a/drivers/mmc/host/renesas_sdhi_internal
Since Salvator-X[S] have a USB2.0 dual-role channel (CN9), this patch
adds dr_mode property for USB2.0 channel 0 (EHCI/OHCI and HS-USB)
as "otg".
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda...@renesas.com>
---
This patch based on the renesas.git / renesas-devel-201710
ver/subsystem, like on Salvator-X(S), right?
> Agreed.
> >
> > For OTG_OFFVBUSn, which is (optionally) driven from USB0_PWEN on
> > Salvator-X(S) I don't know if you need a GPIO hog or not. I have to defer
> > your
> > question to Shimoda-san.
I'm sorry for the delayed response.
I think OTG_OFFVBUSn should be low level to avoid conflict 5V supply from U13's
OUT pins.
> This pin should be tied permanently low to disable internal MAX3355
> internal VBUS charge pump.
I agree.
> Hence probably gpio hog is enough for OTG_OFFVBUSn.
I'm afraid but I don't understand this "gpio hog" means.
> KF has dedicated VBUS power supply controlled by USB0_PWEN.
I agree.
I don’t write any documentations though, but I assumed SW15 is pin 3 side
to use MAX3355's charge pump. So, I added "vbus-supply" to disable SHDN# of
MAX3355.
But, we can also use U13 for power supply on the Salvator-X[S] without
"vbus-supply".
Best regards,
Yoshihiro Shimoda
>
> --
> Regards,
> Vladimir
Hi,
> From: Kishon Vijay Abraham I [mailto:kis...@ti.com], Sent: Wednesday, October
> 11, 2017 5:28 PM
>
> Hi,
>
> On Tuesday 10 October 2017 03:11 PM, Yoshihiro Shimoda wrote:
> > This patch modifies the role_store() to use "enum phy_mode" instead
> >
m lib/swiotlb.c.
I'm not sure the detail of swiotlb.c, but IIUC, it has a memory size limitation.
- In lib/swiotlb.c, it calculates nslots.
- The size of one slot is 2048 bytes because IO_TLB_SHIFT in
include/linux/swiotlb.h is set to 11.
- IO_TLB_SEGSIZE is set to 128 in include/linux/swiotlb.h.
- This value is number of maximum slots.
- So, maximum size for a single map of swiotlb is 256kbytes (2048 * 128).
So, I will submit a patch to set the max_req_size to 256kbytes today.
Best regards,
Yoshihiro Shimoda
96" for r8a7796 SoC
> -- "renesas,rcar-gen2-xhci" for a generic R-Car Gen2 compatible device
> +- "renesas,rcar-gen2-xhci" for a generic R-Car Gen2 or RZ/G1 compatible
> + device
> - "renesas,rcar-gen3-xhci" for a generic R-Car Gen3 compatible device
> - "xhci-platform" (deprecated)
>
It seems good to me. So,
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda...@renesas.com>
Best regards,
Yoshihiro Shimoda
phy-names = "usb";
> + status = "disabled";
> + };
> +
> sdhi0: sd@ee10 {
> compatible = "renesas,sdhi-r8a7743";
> reg = <0 0xee10 0 0x328>;
It seems good to me. So,
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda...@renesas.com>
Best regards,
Yoshihiro Shimoda
> --
> 1.9.1
Hi Dirk-san,
> From: Dirk Behme, Sent: Tuesday, October 17, 2017 2:08 PM
>
> Limiting the thread to Renesas only, again, to discuss the other issue:
>
> On 17.10.2017 06:51, Yoshihiro Shimoda wrote:
> > Hi Linus-san,
> >
> >> From: Linus Walleij, Se
This patch adds GPIO device nodes for r8a77995.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda...@renesas.com>
---
This patch should be applied after the following patch is applied:
"gpio: rcar: Add r8a77995 (R-Car D3) support".
arch/arm64/boot/dts/renesas/r8a
Hi Simon-san,
> From: Simon Horman
> Sent: Wednesday, September 13, 2017 4:50 PM
>
> On Wed, Sep 13, 2017 at 03:52:08PM +0900, Yoshihiro Shimoda wrote:
> > This patch adds GPIO device nodes for r8a77995.
> >
> > Signed-off-by: Yoshihiro Shimoda <
If usb_gadget_giveback_request() is called in usb_ep_queue(),
this printer_write() is possible to cause spinlock recursion. So,
this patch adds spin_unlock() before calls usb_ep_queue() to avoid it.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda...@renesas.com>
---
The recursi
This patch adds binding for r8a77995 (R-Car D3). This SoC can use
"renesas,rcar-gen3-gpio" fallback compatibility. So, this patch
doesn't modify the gpio-rcar driver.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda...@renesas.com>
---
Documentation/devicetree/bindings/g
Add a new compatible string for the R8A77995 (R-Car D3) RAVB.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda...@renesas.com>
---
Documentation/devicetree/bindings/net/renesas,ravb.txt | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/net/renesas,ra
This patch enables EthernetAVB for R-Car D3 draak board.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda...@renesas.com>
---
arch/arm64/boot/dts/renesas/r8a77995-draak.dts | 25 +
1 file changed, 25 insertions(+)
diff --git a/arch/arm64/boot/dts/renesas/r8
This patch adds EthernetAVB device node for r8a77995.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda...@renesas.com>
---
arch/arm64/boot/dts/renesas/r8a77995.dtsi | 45 +++
1 file changed, 45 insertions(+)
diff --git a/arch/arm64/boot/dts/renesas/r8a7799
Hi Geert-san,
> From: Geert Uytterhoeven
> Sent: Wednesday, September 13, 2017 8:48 PM
>
> Hi Shimoda-san,
>
> On Wed, Sep 13, 2017 at 11:35 AM, Yoshihiro Shimoda
> <yoshihiro.shimoda...@renesas.com> wrote:
> >> From: Geert Uytterhoeven
> >>
Hi Geert-san,
> From: Geert Uytterhoeven
> Sent: Wednesday, September 13, 2017 6:22 PM
>
> Hi Shimoda-san,
>
> On Wed, Sep 13, 2017 at 8:52 AM, Yoshihiro Shimoda
> <yoshihiro.shimoda...@renesas.com> wrote:
> > This patch adds GPIO device nodes for r8a77995.
This patch adds GPIO device nodes for r8a77995.
Reviewed-by: Geert Uytterhoeven <geert+rene...@glider.be>
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda...@renesas.com>
---
Changes from v1:
- Change power-domains property in each node.
- Add Reviewed-by (Thanks Geert-san!).
Hi Simon-san,
> From: Simon Horman
> Sent: Monday, September 25, 2017 4:08 PM
>
> On Thu, Sep 21, 2017 at 10:37:15AM +0000, Yoshihiro Shimoda wrote:
> > Hi Simon-san,
> >
> > > From: Simon Horman
> > > Sent: Friday, September 15, 2017 4:35 PM
> >
This patch set is based on the Felipe's usb.git / testing/fixes branch
(The commit is 7661ca09b2ff98f48693f431bb01fed62830e433).
Yoshihiro Shimoda (3):
usb: gadget: udc: renesas_usb3: fix for no-data control transfer
usb: gadget: udc: renesas_usb3: fix Pn_RAMMAP.Pn_MPKT value
usb: gadget
ller")
Cc: <sta...@vger.kernel.org> # v4.5+
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda...@renesas.com>
---
drivers/usb/gadget/udc/renesas_usb3.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/usb/gadget/udc/renesas_usb3.c
b/drivers/usb/gadge
pport for Renesas USB3.0
peripheral controller")
Cc: <sta...@vger.kernel.org> # v4.5+
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda...@renesas.com>
---
drivers/usb/gadget/udc/renesas_usb3.c | 11 ++-
1 file changed, 10 insertions(+), 1 deletion(-)
diff --git a/
_usb3: add support for Renesas USB3.0
peripheral controller")
Cc: <sta...@vger.kernel.org> # v4.5+
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda...@renesas.com>
---
drivers/usb/gadget/udc/renesas_usb3.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/
This patch enables HS-USB channel 3. R-Car H3 ES2.0 has this channel
and we can use it on the Salvator-XS.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda...@renesas.com>
---
arch/arm64/boot/dts/renesas/r8a7795-salvator-xs.dts | 4
1 file changed, 4 insertions(+)
diff --git
This patch enables USB2.0 Host (EHCI/OHCI) channel 3. R-Car H3 ES2.0
has this channel and we can use it on the Salvator-XS.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda...@renesas.com>
---
arch/arm64/boot/dts/renesas/r8a7795-salvator-xs.dts | 8
1 file changed, 8 inse
This patch enables the USB2.0 phy channel 3. R-Car H3 ES2.0 has
this channel and we can use it on the Salvator-XS.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda...@renesas.com>
---
arch/arm64/boot/dts/renesas/r8a7795-salvator-xs.dts | 12
1 file changed, 12 insertions(+)
91b3a1 ("usb: renesas_usbhs: add DMAEngine support")
Cc: <sta...@vger.kernel.org> # v3.1+
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda...@renesas.com>
---
This patch is based on the lastest Felipe's usb.git / testing/fixes branch
(commit id = c3cdce45f8d3dfa5c34678
Hello,
> -Original Message-
> From: Sergei Shtylyov
> Sent: Saturday, September 30, 2017 7:24 PM
>
> Hello!
>
> On 9/29/2017 2:52 PM, Simon Horman wrote:
>
> > From: Yoshihiro Shimoda <yoshihiro.shimoda...@renesas.com>
> >
> > This pa
Hi Simon-san,
> -Original Message-
> From: Simon Horman
> Sent: Monday, October 2, 2017 4:15 PM
>
> On Mon, Oct 02, 2017 at 01:18:49AM +0000, Yoshihiro Shimoda wrote:
> > Hello,
> >
> > > -Original Message-
> > > From: Sergei Shtylyov
From: Takeshi Kihara <takeshi.kihara...@renesas.com>
This patch adds USB3.0 ch0 pinmux support to R8A7795 SoC.
Signed-off-by: Takeshi Kihara <takeshi.kihara...@renesas.com>
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda...@renesas.com>
---
drivers/pinctrl/sh-pfc/
This patch set is based on the renesas-drivers.git /
renesas-drivers-2017-09-19-v4.14-rc1 tag.
After this patch set is applied, I will submit integration patch for
salvator-common.dtsi. Since the bootloader of Salvator-X[S] enables
the USB3 pins, usb3.0 host works correctly. But, we should enable
From: Takeshi Kihara <takeshi.kihara...@renesas.com>
This patch adds USB3{0,1} (USB3.0 host) pinmux support to R8A7795 ES1.x
SoC.
Signed-off-by: Takeshi Kihara <takeshi.kihara...@renesas.com>
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda...@renesas.com>
---
drivers/
Hi Geert-san,
> -Original Message-
> From: Geert Uytterhoeven
> Sent: Monday, October 2, 2017 6:20 PM
>
> Hi Shimoda-san,
>
> On Mon, Oct 2, 2017 at 11:14 AM, Yoshihiro Shimoda
> <yoshihiro.shimoda...@renesas.com> wrote:
> >> -Original
Hi Geert-san, Kieran-san,
> -Original Message-
> From: Kieran Bingham
> Sent: Monday, October 2, 2017 5:45 PM
>
> Hi Geert, Shimoda-san,
>
> On 02/10/17 09:20, Geert Uytterhoeven wrote:
> > Hi Shimoda-san,
> >
> > On Mon, Oct 2, 2017 at 8:29 AM, Y
This patch set is based on the latest Felipe's usb.git / testing/next branch
(commit id = af846d7ab55c846af6d6f150e9af96295101e068)
Kazuya Mizuguchi (1):
usb: gadget: udc: renesas_usb3: move pm_runtime_{en,dis}able()
Yoshihiro Shimoda (2):
usb: gadget: udc: renesas_usb3: Add suspend/resume
e commit log]
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda...@renesas.com>
---
drivers/usb/gadget/udc/renesas_usb3.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/usb/gadget/udc/renesas_usb3.c
b/drivers/usb/gadget/udc/renesas_usb3.c
index df37c1e..7d99774 10
This patch adds support for generic phy as an optional. If you want
to use a generic phy (e.g. phy-rcar-gen3-usb3 driver) on this driver,
you have to do "insmod phy-rcar-gen3-usb3.ko" first for now.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda...@renesas.com>
---
.../dev
This patch adds support suspend/resume functions
Signed-off-by: Kazuya Mizuguchi <kazuya.mizuguchi...@renesas.com>
[shimoda: add the commit log]
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda...@renesas.com>
---
drivers/usb/gadget/udc/renesas
#define RENESAS_USB_DRIVER_H
>
> -#include
> +#include
Since this driver doesn't use any extcon-provider APIs for now,
we doesn't need the modification, IIUC.
Best regards,
Yoshihiro Shimoda
This patch adds support for R-Car D3. This SoC needs to release
the PLL reset by the UGCTRL register. So, since this is not the same
as other R-Car Gen3 SoCs, this patch adds a new type as
"USBHS_TYPE_RCAR_GEN3_WITH_PLL".
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda..
This patch set is based on the latest Felipe's usb.git / testing/next branch
(commit id = af846d7ab55c846af6d6f150e9af96295101e068)
Yoshihiro Shimoda (2):
usb: renesas_usbhs: unify Gen2/3 pipe_config setting
usb: renesas_usbhs: add support for R-Car D3
.../devicetree/bindings/usb
This patch unifies the Gen2 and Gen3 pipe_config setting on
usbhs_parse_dt().
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda...@renesas.com>
---
drivers/usb/renesas_usbhs/common.c | 13 -
1 file changed, 4 insertions(+), 9 deletions(-)
diff --git a/drivers/usb/renesas
Since a R-Car Gen3 bootloader enables the PFC of USB3.0 channel 0,
the USB3.0 host controller works without this setting on the kernel.
But, this setting should have salvator-common.dtsi. So, this patch
adds the pfc node for USB3.0 channel 0.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shim
Hi Geert-san,
> -Original Message-
> From: Geert Uytterhoeven, Sent: Tuesday, October 3, 2017 4:13 PM
>
> Hi Shimoda-san,
>
> On Tue, Oct 3, 2017 at 5:13 AM, Yoshihiro Shimoda
> <yoshihiro.shimoda...@renesas.com> wrote:
> > I'm afraid but I
Hi, Vinod,
Thank you for reply!
> From: Vinod Koul
> Sent: Friday, August 25, 2017 3:33 PM
>
> On Fri, Aug 25, 2017 at 05:47:22AM +0000, Yoshihiro Shimoda wrote:
> > Hi Rob,
> >
> > > From: Rob Herring
> > > Sent: Friday, August 11, 2017 1:26 AM
>
Hi Rob,
> From: Rob Herring
> Sent: Friday, August 11, 2017 1:26 AM
>
> On Wed, Aug 02, 2017 at 08:33:34PM +0900, Yoshihiro Shimoda wrote:
> > This patch adds R-Car M3-W device tree bindings for usb-dmac driver.
> >
> > Signed-off-by: Yoshihiro Shimoda <
This patch changes the name from from e606.pfc and pfc@e606 to
e606.pin-controller and pin-controller@e606 like other Renesas
SoCs.
Reported-by: Geert Uytterhoeven <geert+rene...@glider.be>
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda...@renesas.com>
---
arc
Hi Simon-san,
> -Original Message-
> From: Simon Horman
> Sent: Monday, August 28, 2017 11:05 PM
>
> On Mon, Aug 28, 2017 at 10:39:47AM +0200, Geert Uytterhoeven wrote:
> > Hi Shimoda-san, Simon,
> >
> > On Wed, Aug 9, 2017 at 2:20 PM, Yoshihi
Hi Geert-san,
Thank you for the comments!
> From: Geert Uytterhoeven
> Sent: Thursday, August 31, 2017 4:51 PM
>
> Hi Shimoda-san,
>
> On Thu, Aug 31, 2017 at 9:31 AM, Yoshihiro Shimoda
> <yoshihiro.shimoda...@renesas.com> wrote:
> > This patch adds SoC-sp
Hi Geert-san,
> From: Geert Uytterhoeven
> Sent: Thursday, August 31, 2017 5:27 PM
>
> Hi Shimoda-san,
>
> On Thu, Aug 31, 2017 at 10:15 AM, Yoshihiro Shimoda
> <yoshihiro.shimoda...@renesas.com> wrote:
> >> From: Geert Uytterhoeven
> >> Sent: Thurs
301 - 400 of 766 matches
Mail list logo
