[PATCH 4/5] pwm: rcar: remove legacy APIs

2018-12-07 Thread Yoshihiro Shimoda
This patch removes legacy APIs. Since rcar_pwm_{en,dis}able() functions are reused on "atomic" API, this patch changes the arguments of these functions. No change in behavior. Signed-off-by: Yoshihiro Shimoda --- drivers/pwm/pwm-rcar.c | 45 ---

[PATCH 3/5] pwm: rcar: Use "atomic" API on rcar_pwm_resume()

2018-12-07 Thread Yoshihiro Shimoda
To remove legacy API related functions in the future, this patch uses "atomic" related function instead. No change in behavior. Signed-off-by: Yoshihiro Shimoda --- drivers/pwm/pwm-rcar.c | 8 +++- 1 file changed, 3 insertions(+), 5 deletions(-) diff --git a/drivers/pwm/pw

[PATCH 5/5] pwm: rcar: add workaround to output "pseudo" low level

2018-12-07 Thread Yoshihiro Shimoda
This PWM Timer cannot output low because setting 0x000 is prohibited on PWMCNT.PH0 (High-Level Period) bitfields. So, avoiding the prohibited, this patch adds a workaround function to change the value from 0 to 1 as pseudo low level. Signed-off-by: Yoshihiro Shimoda --- drivers/pwm/pwm-rcar.c

[PATCH 2/5] pwm: rcar: Add support "atomic" API

2018-12-07 Thread Yoshihiro Shimoda
This patch adds support for "atomic" API. Behavior is the same as when using legacy APIs. Signed-off-by: Yoshihiro Shimoda --- drivers/pwm/pwm-rcar.c | 32 1 file changed, 32 insertions(+) diff --git a/drivers/pwm/pwm-rcar.c b/drivers/pwm/pwm-rc

[PATCH 1/5] pwm: rcar: add rcar_pwm_calc_counter() to calculate PWMCNT value only

2018-12-07 Thread Yoshihiro Shimoda
-by: Yoshihiro Shimoda --- drivers/pwm/pwm-rcar.c | 18 +- 1 file changed, 13 insertions(+), 5 deletions(-) diff --git a/drivers/pwm/pwm-rcar.c b/drivers/pwm/pwm-rcar.c index a41812f..9cf4567 100644 --- a/drivers/pwm/pwm-rcar.c +++ b/drivers/pwm/pwm-rcar.c @@ -36,6 +36,7 @@ struct

[PATCH 0/5] pwm: rcar: Add support "atomic" API and workaround

2018-12-07 Thread Yoshihiro Shimoda
This patch adds support for PWM "atomic" API. This patch also adds a workaround to output "pseudo" low level. Otherwise, the PWM backlight driver doesn't work correctly, especially it cannot output maximum brightness actually. Yoshihiro Shimoda (5): pwm: rcar: add r

RE: [PATCH 2/3] phy: renesas: rcar-gen3-usb2: Add support for R7S9210

2018-11-19 Thread Yoshihiro Shimoda
Hi Chris-san, > From: Chris Brandt, Sent: Thursday, November 15, 2018 9:34 PM > > Hi Shimodaさん > > > From: Yoshihiro Shimoda > > Sent: Thursday, November 15, 2018 4:20 AM > > > > Host does NOT work: > > > //else > > > // /* No

RE: [PATCH 2/3] phy: renesas: rcar-gen3-usb2: Add support for R7S9210

2018-11-15 Thread Yoshihiro Shimoda
Hi Chris-san, > From: Chris Brandt, Sent: Wednesday, November 14, 2018 10:03 PM > > Hi Shimoda-san, > > > From: Yoshihiro Shimoda > > Sent: Wednesday, November 14, 2018 7:24 AM > > > > > config PHY_RCAR_GEN3_USB2 > > > > > t

RE: [PATCH 2/3] phy: renesas: rcar-gen3-usb2: Add support for R7S9210

2018-11-14 Thread Yoshihiro Shimoda
Hi Chris-san, > From: Chris Brandt, Sent: Wednesday, November 14, 2018 8:18 PM > > Hi Shimoda-san, > > > From: Yoshihiro Shimoda > > Sent: Wednesday, November 14, 2018 5:50 AM > > > config PHY_RCAR_GEN3_USB2 > > > tristate "Renesas R-Car g

RE: [PATCH 3/3] dt-bindings: rcar-gen3-phy-usb2: Add r7s9210 support

2018-11-14 Thread Yoshihiro Shimoda
n3 is the same (0x8000). - However, R-Car H3 USB port1 seems to ignore this value because the port always acts as host. If I changed the register to 0 on R-Car H3 ES3.0, the port1 can work as host. So, I meant all "renesas,rcar-gen3-usb2-phy" devices without "is_otg_cha

RE: [PATCH/RFC] iommu/ipmmu-vmsa: R-Car M3-N/V3H/E3 AVB whitelist prototype

2018-11-14 Thread Yoshihiro Shimoda
Hi Geert-san, > From: Geert Uytterhoeven, Sent: Monday, November 12, 2018 6:08 PM > > Hi Shimoda-san, > > On Mon, Nov 12, 2018 at 9:53 AM Yoshihiro Shimoda > wrote: > > > From: Geert Uytterhoeven, Sent: Monday, November 12, 2018 5:19 PM > > > On Mon, Nov 1

RE: [PATCH 3/3] dt-bindings: rcar-gen3-phy-usb2: Add r7s9210 support

2018-11-14 Thread Yoshihiro Shimoda
y" for a generic R-Car Gen3, RZ/G2 or > + RZ/A2 compatible device. > > When compatible with the generic version, nodes must list the > SoC-specific version corresponding to the platform first > -- > 2.16.1 As I mentioned the PATCH 2/3, we should describe a new property "renesas,uses_usb_x1" as optional properties here. Best regards, Yoshihiro Shimoda

RE: [PATCH 2/3] phy: renesas: rcar-gen3-usb2: Add support for R7S9210

2018-11-14 Thread Yoshihiro Shimoda
line. > { .compatible = "renesas,usb2-phy-r8a7795" }, > { .compatible = "renesas,usb2-phy-r8a7796" }, > { .compatible = "renesas,usb2-phy-r8a77965" }, > @@ -471,6 +480,9 @@ static int rcar_gen3_phy_usb2_probe(struct > platform_device *pdev) > } > } > > + i

RE: [PATCH/RFC] iommu/ipmmu-vmsa: R-Car M3-N/V3H/E3 AVB whitelist prototype

2018-11-12 Thread Yoshihiro Shimoda
Hi Geert-san, Thank you for the comment! > From: Geert Uytterhoeven, Sent: Monday, November 12, 2018 5:19 PM > > Hi Shimoda-san, > > On Mon, Nov 12, 2018 at 8:24 AM Yoshihiro Shimoda > wrote: > > --- a/drivers/iommu/ipmmu-vmsa.c > > +++ b/drivers/iommu/ipmmu

RE: [PATCH/RFC] iommu/ipmmu-vmsa: R-Car M3-N/V3H/E3 AVB whitelist prototype

2018-11-11 Thread Yoshihiro Shimoda
{ .soc_id = "r8a7795", }, - { .soc_id = "r8a7796", }, + { .soc_id = "r8a7795", .revision = "ES3.*" }, { .soc_id = "r8a77965", }, { .soc_id = "r8a77970", }, + { .soc_id = "r8a77990", }, { .soc_id =

RE: [PATCH 2/2] arm64: dts: r8a77990: ebisu: Enable SDHI interfaces

2018-11-05 Thread Yoshihiro Shimoda
SoC. > > Signed-off-by: Takeshi Kihara > Signed-off-by: Marek Vasut > Cc: Geert Uytterhoeven > Cc: Simon Horman > Cc: Wolfram Sang > Cc: Yoshihiro Shimoda > Cc: linux-renesas-soc@vger.kernel.org > Cc: linux-arm-ker...@lists.infradead.org > --- Thank you for the patch!

RE: [PATCH 1/2] arm64: dts: r8a77990: Add SDHI device nodes

2018-11-05 Thread Yoshihiro Shimoda
n > Cc: Simon Horman > Cc: Wolfram Sang > Cc: Yoshihiro Shimoda > Cc: linux-renesas-soc@vger.kernel.org > Cc: linux-arm-ker...@lists.infradead.org > --- Thank you for the patch! Reviewed-by: Yoshihiro Shimoda I guess this patch and the 2/2 patch for ebisu have to be merged i

RE: [PATCH 2/2] pinctrl: sh-pfc: r8a77990: Add voltage switch operations for SDHI

2018-11-05 Thread Yoshihiro Shimoda
voltage switch possible. > > Signed-off-by: Takeshi Kihara > Signed-off-by: Marek Vasut > Cc: Geert Uytterhoeven > Cc: Simon Horman > Cc: Wolfram Sang > Cc: Yoshihiro Shimoda > Cc: linux-renesas-soc@vger.kernel.org > --- Thank you for the patch! Reviewed-by: Yoshihiro Shimoda Best regards, Yoshihiro Shimoda

RE: [PATCH 1/2] pinctrl: sh-pfc: r8a77990: Add SDHI pins, groups and functions

2018-11-05 Thread Yoshihiro Shimoda
eert Uytterhoeven > Cc: Simon Horman > Cc: Wolfram Sang > Cc: Yoshihiro Shimoda > Cc: linux-renesas-soc@vger.kernel.org > --- Thank you for the patch! Reviewed-by: Yoshihiro Shimoda Best regards, Yoshihiro Shimoda

RE: [PATCH] mmc: renesas_sdhi: Whitelist R8A77990 SDHI

2018-11-05 Thread Yoshihiro Shimoda
; Cc: Simon Horman > Cc: Wolfram Sang > Cc: Yoshihiro Shimoda > Cc: Ulf Hansson > Cc: linux-renesas-soc@vger.kernel.org > --- Thank you for the patch! Reviewed-by: Yoshihiro Shimoda Best regards, Yoshihiro Shimoda

RE: [PATCH] arm64: dts: r8a77990: ebisu: Add serial console pins

2018-11-05 Thread Yoshihiro Shimoda
c: Simon Horman > Cc: Wolfram Sang > Cc: Yoshihiro Shimoda > Cc: linux-renesas-soc@vger.kernel.org > Cc: linux-arm-ker...@lists.infradead.org > --- Thank you for the patch! Reviewed-by: Yoshihiro Shimoda Best regards, Yoshihiro Shimoda > arch/arm64/boot/dts/renesas/r8a7

[PATCH] serial: sh-sci: Fix could not remove dev_attr_rx_fifo_timeout

2018-10-30 Thread Yoshihiro Shimoda
Cc: # v4.11+ Signed-off-by: Yoshihiro Shimoda --- drivers/tty/serial/sh-sci.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c index ab3f6e91..3649b83 100644 --- a/drivers/tty/serial/sh-sci.c +++ b/drivers/tty/se

RE: [PATCH 3/7] ARM: dts: r8a77470: Add USB PHY DT support

2018-10-29 Thread Yoshihiro Shimoda
Hi Biju-san, > From: Biju Das, Sent: Monday, October 29, 2018 6:15 PM > > -Original Message- > > From: Yoshihiro Shimoda > > Sent: 29 October 2018 08:42 > > > > Hi Biju-san, > > > > > From: Biju Das, Sent: Thursday, October 25, 2018 10:57

RE: [PATCH 2/7] phy: renesas: phy-rcar-gen2: Add support for r8a77470

2018-10-29 Thread Yoshihiro Shimoda
y = phy_get_drvdata(p); > + struct rcar_gen2_phy_driver *drv = phy->channel->drv; > + void __iomem *base = drv->base; > + unsigned long flags; > + u32 value; > + > + spin_lock_irqsave(>lock, flags); > + > + /* Power on USBHS PHY */ > +

RE: [PATCH 3/7] ARM: dts: r8a77470: Add USB PHY DT support

2018-10-29 Thread Yoshihiro Shimoda
status = "disabled"; > + resets = < 706>, < 705>; > + power-domains = < R8A77470_PD_ALWAYS_ON>; > + > + usb1: usb-channel@0 { > + reg = <0>; > + #phy-cells = <1>; > + }; > + }; I think this usbphy1 has to have 'status = "disabled"'. Best regards, Yoshihiro Shimoda

RE: [PATCH v2] arm64: dts: renesas: add/enable USB2.0 peripheral for R-Car [DE]3

2018-10-24 Thread Yoshihiro Shimoda
Hi Simon-san again, > From: Yoshihiro Shimoda, Sent: Wednesday, October 24, 2018 10:05 AM > > Hi Simon-san, > > > From: Simon Horman, Sent: Wednesday, October 17, 2018 5:54 PM > > > > On Tue, Oct 16, 2018 at 03:05:09PM +0900, Yoshihiro Shimoda wrote: > &

[PATCH v3] arm64: dts: renesas: add/enable USB2.0 peripheral for R-Car [DE]3

2018-10-24 Thread Yoshihiro Shimoda
't connect the ID pin, so this adds "renesas,no-otg-pins" property into usb2_phy0 node. Signed-off-by: Yoshihiro Shimoda --- Changed from v2: - Use otg pin on r8a77990-ebisu board. So, I revise the commit log. - I got Reviewed-by from Simon-san at v2. However, since I change the integr

RE: [PATCH v2] arm64: dts: renesas: add/enable USB2.0 peripheral for R-Car [DE]3

2018-10-23 Thread Yoshihiro Shimoda
Hi Simon-san, > From: Simon Horman, Sent: Wednesday, October 17, 2018 5:54 PM > > On Tue, Oct 16, 2018 at 03:05:09PM +0900, Yoshihiro Shimoda wrote: > > This patch adds/enables USB2.0 peripheral for R-Car [DE]3 boards. > > So, the default mode on each board is: > >

[PATCH] arm64: dts: renesas: salvator-common: add companion property in usb3_peri0

2018-10-22 Thread Yoshihiro Shimoda
"). Signed-off-by: Yoshihiro Shimoda --- arch/arm64/boot/dts/renesas/salvator-common.dtsi | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm64/boot/dts/renesas/salvator-common.dtsi b/arch/arm64/boot/dts/renesas/salvator-common.dtsi index 054a7ee..a3e8950 100644 --- a/arch/arm64/boot/

[PATCH] arm64: dts: renesas: r8a77990: add/enable USB3.0 peripheral device node

2018-10-22 Thread Yoshihiro Shimoda
This patch adds/enables USB3.0 peripheral device node for r8a77990 ebisu board. Signed-off-by: Yoshihiro Shimoda --- arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts | 5 + arch/arm64/boot/dts/renesas/r8a77990.dtsi | 11 +++ 2 files changed, 16 insertions(+) diff --git a/arch

RE: [PATCH] arm64: dts: renesas: revise hsusb's reg size

2018-10-18 Thread Yoshihiro Shimoda
Hi Simon-san, Geert-san, > From: Geert Uytterhoeven, Sent: Wednesday, October 17, 2018 6:35 PM > > Hi Simon, > > On Wed, Oct 17, 2018 at 10:57 AM Simon Horman wrote: > > On Tue, Oct 16, 2018 at 03:04:50PM +0900, Yoshihiro Shimoda wrote: > > > This patch revi

[PATCH v2] arm64: dts: renesas: add/enable USB2.0 peripheral for R-Car [DE]3

2018-10-16 Thread Yoshihiro Shimoda
This patch adds/enables USB2.0 peripheral for R-Car [DE]3 boards. So, the default mode on each board is: - R-Car D3 Draak board (has a type-A connector) = host. - R-Car E3 Ebisu board (has a type-B micro connector) = peripheral. Signed-off-by: Yoshihiro Shimoda --- Changed from v1: - Revise

[PATCH] arm64: dts: renesas: revise hsusb's reg size

2018-10-16 Thread Yoshihiro Shimoda
853777f ("arm64: dts: r8a7796: Add HSUSB device node") Fixes: 9e1b00a2ef43 ("arm64: dts: renesas: r8a77965: Add "reg" properties") Signed-off-by: Yoshihiro Shimoda --- arch/arm64/boot/dts/renesas/r8a7795.dtsi | 4 ++-- arch/arm64/boot/dts/renesas/r8a7796.dtsi | 2

RE: USB2.0 blocks on RZ/G1C

2018-10-15 Thread Yoshihiro Shimoda
[01]/hsusb[01]/usbphy[01] nodes. - ehci0/ohci0/hsusb0 nodes have phys property with usbphy0. - ehci1/ohci1/hsusb1 nodes have phys property with both usbphy0 and usbphy1 to achieve the 2) you mentioned above. - usbphy[01] has reg/clocks as both own hsusb and usb host blocks. About the phy driver: - Add the 1) and 3) you mentioned above. Best regards, Yoshihiro Shimoda > Regards, > Biju

RE: [PATCH] arm64: dts: renesas: add/enable USB2.0 peripheral for R-Car [DE]3

2018-10-15 Thread Yoshihiro Shimoda
Hi Biju-san, > From: Biju Das, Sent: Friday, October 12, 2018 5:32 PM > > Hi Shimoda-San, > > Thanks for the patch. > > > -Original Message- > > From: linux-renesas-soc-ow...@vger.kernel.org > ow...@vger.kernel.org> On Behalf Of Yoshihiro Shi

[PATCH] arm64: dts: renesas: add/enable USB2.0 peripheral for R-Car [DE]3

2018-10-09 Thread Yoshihiro Shimoda
This patch adds/enables USB2.0 peripheral for R-Car [DE]3 boards. So, the default mode on each board is: - R-Car D3 Draak board (has a type-A connector) = host. - R-Car E3 Ebisu board (has a type-B micro connector) = peripheral. Signed-off-by: Yoshihiro Shimoda --- arch/arm64/boot/dts/renesas

[PATCH 0/8] phy: renesas: rcar-gen3-usb2: re-design for all R-Car Gen3 SoCs

2018-09-21 Thread Yoshihiro Shimoda
This patch set is based on the linux-phy / next branch (the commit id is 53706a1168631fa5bf2e6d47de4647ea7e69f270). Since all R-Car Gen3 SoCs have dedicated otg pins in fact, the previous code was not good to handle it. So, this patch set changes the design for all R-Car Gen3 SoCs. Yoshihiro

[PATCH 6/8] phy: renesas: rcar-gen3-usb2: change a condition "dr_mode"

2018-09-21 Thread Yoshihiro Shimoda
This patch changes a condition about dr_mode. If a device node has any dr_mode ("host", "peripheral" or "otg"), this driver allows to set "is_otg_channel" to true. Also, this patch keeps the dr_mode value for future use. Signed-off-by: Yoshihiro Shimoda

[PATCH 8/8] phy: renesas: rcar-gen3-usb2: add is_otg_channel to use "role" sysfs

2018-09-21 Thread Yoshihiro Shimoda
Even if a board doesn't have otg pins connection, this hardware can change the role by a register setting. So, this patch adds "is_otg_channel" for it. Signed-off-by: Yoshihiro Shimoda --- drivers/phy/renesas/phy-rcar-gen3-usb2.c | 22 +- 1 file changed, 17 insert

[PATCH 7/8] phy: renesas: rcar-gen3-usb2: add conditions for uses_otg_pins == false

2018-09-21 Thread Yoshihiro Shimoda
If uses_otg_pins is set to false, this driver 1) should disable otg related interruptions, and 2) should not get ID pin signal, to avoid unexpected behaviors. So, this patch adds conditions for it. Signed-off-by: Yoshihiro Shimoda --- drivers/phy/renesas/phy-rcar-gen3-usb2.c | 5 - 1 file

[PATCH 2/8] phy: renesas: rcar-gen3-usb2: fix vbus_ctrl for role sysfs

2018-09-21 Thread Yoshihiro Shimoda
r usb role swap") Signed-off-by: Yoshihiro Shimoda --- drivers/phy/renesas/phy-rcar-gen3-usb2.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/phy/renesas/phy-rcar-gen3-usb2.c b/drivers/phy/renesas/phy-rcar-gen3-usb2.c index 3d57ea1..a6db25c 100644 --- a/drivers/p

RE: [PATCH] arm64: dts: renesas: revise properties for usb 2.0

2018-09-21 Thread Yoshihiro Shimoda
Hi Simon-san, > From: Simon Horman, Sent: Friday, September 21, 2018 4:37 PM > > On Thu, Sep 20, 2018 at 05:55:00AM +, Yoshihiro Shimoda wrote: > > Hi Simon-san, > > > > > From: Simon Horman, Sent: Wednesday, September 5, 2018 7:33 PM > > > > &g

[PATCH v2] arm64: dts: renesas: revise properties for R-Car Gen3 SoCs' usb 2.0

2018-09-21 Thread Yoshihiro Shimoda
if the renesas_usbhs driver doesn't have reset_control and multiple clock management. Signed-off-by: Yoshihiro Shimoda Reviewed-by: Simon Horman --- This patch is based on the renesas.git / renesas-devel-20180919-v4.19-rc4 tag. This patch is related to the following patches which will be merged

RE: [PATCH] arm64: dts: renesas: revise properties for usb 2.0

2018-09-19 Thread Yoshihiro Shimoda
Hi Simon-san, > From: Simon Horman, Sent: Wednesday, September 5, 2018 7:33 PM > > On Fri, Aug 31, 2018 at 05:20:51PM +0900, Yoshihiro Shimoda wrote: > > R-Car Gen3 needs to enable/deassert clocks/resets of both usb 2.0 > > host (included phy) and peripheral. Otherwi

RE: [PATCH] arm64: dts: renesas: revise properties for usb 2.0

2018-09-06 Thread Yoshihiro Shimoda
Hi Geert-san, > From: Geert Uytterhoeven, Sent: Thursday, September 6, 2018 7:19 PM > > Hi Shimoda-san, > > On Thu, Sep 6, 2018 at 12:09 PM Yoshihiro Shimoda > wrote: > > > From: Geert Uytterhoeven, Sent: Wednesday, September 5, 2018 9:59 PM > > > On Fri

RE: [PATCH] arm64: dts: renesas: revise properties for usb 2.0

2018-09-06 Thread Yoshihiro Shimoda
Hi Geert-san, > From: Geert Uytterhoeven, Sent: Wednesday, September 5, 2018 9:59 PM > > Hi Shimoda-san, > > On Fri, Aug 31, 2018 at 10:22 AM Yoshihiro Shimoda > wrote: > > R-Car Gen3 needs to enable/deassert clocks/resets of both usb 2.0 > > host (included

[PATCH v2 3/3] usb: renesas_usbhs: Add multiple clocks management

2018-08-31 Thread Yoshihiro Shimoda
-by: Yoshihiro Shimoda --- drivers/usb/renesas_usbhs/common.c | 35 +++ drivers/usb/renesas_usbhs/common.h | 3 +++ 2 files changed, 38 insertions(+) diff --git a/drivers/usb/renesas_usbhs/common.c b/drivers/usb/renesas_usbhs/common.c index 1d355d5..39ed714 100644

[PATCH v2 0/3] usb: renesas_usbhs: add reset_control and multiple clocks management

2018-08-31 Thread Yoshihiro Shimoda
of two functions on patch 3/3. - Use staic array of struct clk_bulk_data instead of a pointer on patch 3/3. Yoshihiro Shimoda (3): usb: renesas_usbhs: Add reset_control dt-bindings: usb: renesas_usbhs: add clock-names property usb: renesas_usbhs: Add multiple clocks management .../devicetree

[PATCH] arm64: dts: renesas: revise properties for usb 2.0

2018-08-31 Thread Yoshihiro Shimoda
if the renesas_usbhs driver doesn't have reset_control and multiple clock management. Signed-off-by: Yoshihiro Shimoda --- This patch is based on the renesas.git / renesas-devel-20180830-v4.19-rc1 tag. This patch is related to the following patch series: https://patchwork.kernel.org/project/linux

RE: [PATCH] arm64: dts: renesas: r8a77965: Fix clock/reset for usb2_phy1

2018-08-29 Thread Yoshihiro Shimoda
en Thank you for the patch! Reviewed-by: Yoshihiro Shimoda Best regards, Yoshihiro Shimoda

RE: [PATCH] arm64: dts: renesas: r8a77965: Fix HS-USB compatible

2018-08-29 Thread Yoshihiro Shimoda
by: Geert Uytterhoeven Thank you for the patch! Reviewed-by: Yoshihiro Shimoda Best regards, Yoshihiro Shimoda

RE: [PATCH] usb: host: xhci-rcar: Add support for r8a774a1

2018-08-26 Thread Yoshihiro Shimoda
indings patch for usb-xhci [1] and it had "renesas,rcar-gen3-xhci" for RZ/G2. In other words, if a xhci node of RZ/G2 dtsi has "renesas,rcar-gen3-xhci" compatible, this can probe the xhci-plat/rcar driver with the firmware V3. [1] https://patchwork.kernel.org/patch/1

RE: [PATCH] usb: renesas_usbhs: Add a compatible string for r8a774a1

2018-08-26 Thread Yoshihiro Shimoda
{ I don't think you need this adding entry for r8a774a1 actually because you also submitted a bindings patch [1] and it had "renesas,rcar-gen3-usbhs" for RZ/G2. [1] https://patchwork.kernel.org/patch/10574875/ Best regards, Yoshihiro Shimoda > .compatible = "renesas,usbhs-r8a7790", > .data = (void *)USBHS_TYPE_RCAR_GEN2, > }, > -- > 2.7.4

RE: [LTSI-dev] [GIT/RFC PULL LTSI-4.14] Renesas SoCs and Drivers to v4.18-rc6

2018-08-01 Thread Yoshihiro Shimoda
gpio-pca953x driver because the following commit was missing in the branch: commit 8a64e557f399090f5d1917b2f32a065da2b12be1 Author: Sergei Shtylyov Date: Thu Nov 16 23:18:32 2017 +0300 gpio: pca953x: fix vendor prefix for PCA9654 So, would you backport the commit? Best regards, Yoshihiro Shimoda

[PATCH v2] arm64: dts: renesas: r8a77990: Enable PWM for Ebisu board

2018-07-31 Thread Yoshihiro Shimoda
This patch adds PWM device nodes and enables PWM3 and PWM5 for R-Car E3 Ebisu board. These devices are used for backlight control. Signed-off-by: Yoshihiro Shimoda Reviewed-by: Geert Uytterhoeven --- I have submitted dt-bindings for R-Car E3 (not merged into PWM subsystem yet): https

RE: [PATCH] arm64: dts: renesas: r8a77990: Enable PWM for Ebisu board

2018-07-31 Thread Yoshihiro Shimoda
Hi Geert-san, > From: Geert Uytterhoeven, Sent: Tuesday, July 31, 2018 3:39 PM > > Hi Shimoda-san, > > On Tue, Jul 31, 2018 at 8:14 AM Yoshihiro Shimoda > wrote: > > > From: Geert Uytterhoeven, Sent: Tuesday, July 31, 2018 12:34 AM > > > On Mon, Jul 3

RE: [PATCH] arm64: dts: renesas: r8a77990: Enable PWM for Ebisu board

2018-07-31 Thread Yoshihiro Shimoda
Hi Geert-san, > From: Geert Uytterhoeven, Sent: Tuesday, July 31, 2018 12:34 AM > > Hi Shimoda-san, > > On Mon, Jul 30, 2018 at 1:55 PM Yoshihiro Shimoda > wrote: > > This patch adds PWM device nodes and enables PWM3 and PWM5 for > > R-Car E3 Ebisu board. > &g

[PATCH] arm64: dts: renesas: r8a77990: Enable PWM for Ebisu board

2018-07-30 Thread Yoshihiro Shimoda
This patch adds PWM device nodes and enables PWM3 and PWM5 for R-Car E3 Ebisu board. Signed-off-by: Yoshihiro Shimoda --- I have submitted dt-bindings for R-Car E3 (not merged into PWM subsystem yet): https://patchwork.kernel.org/patch/10548969/ arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts

[PATCH] dt-bindings: pwm: rcar: Add bindings for R-Car E3 support

2018-07-30 Thread Yoshihiro Shimoda
This patch adds bindings for R-Car E3. No driver update is needed. Signed-off-by: Yoshihiro Shimoda --- Documentation/devicetree/bindings/pwm/renesas,pwm-rcar.txt | 1 + 1 file changed, 1 insertion(+) diff --git a/Documentation/devicetree/bindings/pwm/renesas,pwm-rcar.txt b/Documentation

[PATCH] pinctrl: sh-pfc: r8a77990: Add PWM pins, groups and functions

2018-07-30 Thread Yoshihiro Shimoda
From: Takeshi Kihara This patch adds PWM{0,1,2,3,4,5,6} pins, groups and functions to the R8A77990 SoC. Signed-off-by: Takeshi Kihara Signed-off-by: Yoshihiro Shimoda --- drivers/pinctrl/sh-pfc/pfc-r8a77990.c | 211 ++ 1 file changed, 211 insertions(+) diff

[PATCH] dmaengine: sh: rcar-dmac: Should not stop the DMAC by rcar_dmac_sync_tcr()

2018-07-25 Thread Yoshihiro Shimoda
now, and clearing CHCR.DE bit in rcar_dmac_chan_get_residue() doesn't need anymore. So, this patch removes the rcar_dmac_sync_tcr(). Fixes: 73a47bd0da66 ("dmaengine: rcar-dmac: use TCRB instead of TCR for residue") Signed-off-by: Yoshihiro Shimoda Tested-by: Hiroyuki Yokoyama --- drivers/d

[PATCH] arm64: dts: renesas: r8a77990: Enable USB3.0 host for Ebisu board

2018-07-17 Thread Yoshihiro Shimoda
This patch adds and USB3.0 host device node and enable it for R-Car E3 Ebisu board. Signed-off-by: Yoshihiro Shimoda --- - The dt-binding for usb-xhci has already been merged into linux-next: https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/commit/Documentation/devicetree

[PATCH] arm64: dts: renesas: Unify the labels for RWDT

2018-07-11 Thread Yoshihiro Shimoda
The labels for RWDT device node were named as 2 types now: - wdt0: r8a7795, r8a7796, r8a77965. - rwdt: r8a77970, r8a77990, r8a77995. To be made consistent, this patch unifis the labels as the hardware name "rwdt". Signed-off-by: Yoshihiro Shimoda --- arch/arm64/boot/dts/renesas/r8

RE: [PATCH 0/2] dma: sh: rcar-dmac: Add dma_pause operation

2018-07-10 Thread Yoshihiro Shimoda
Hi Vinod, > From: Vinod, Sent: Wednesday, July 11, 2018 12:22 AM > > On 02-07-18, 18:21, Yoshihiro Shimoda wrote: > > This patch set is based on the lasest slave-dma / next branch. > > > > This issue can be reproduced by the following commands on r8a7795 > > Sa

[PATCH v2 2/2] dmaengine: sh: rcar-dmac: Add dma_pause operation

2018-07-10 Thread Yoshihiro Shimoda
] is not true: In rx_timer_fn() of the sh-sci.c: dmaengine_pause(); ... dmaengine_tx_status(); /* [1] */ ... dmaengine_terminate_all(); /* [2] */ Signed-off-by: Yoshihiro Shimoda --- drivers/dma/sh/rcar-dmac.c | 12 1 file

[PATCH v2 1/2] dmaengine: sh: rcar-dmac: add a new function to clear CHCR.DE with barrier

2018-07-10 Thread Yoshihiro Shimoda
This patch adds a new function rcar_dmac_clear_chcr_de() to simplify adding pause function later. Signed-off-by: Yoshihiro Shimoda --- drivers/dma/sh/rcar-dmac.c | 15 +++ 1 file changed, 11 insertions(+), 4 deletions(-) diff --git a/drivers/dma/sh/rcar-dmac.c b/drivers/dma/sh/rcar

[PATCH v2 0/2] dmaengine: sh: rcar-dmac: Add dma_pause operation

2018-07-10 Thread Yoshihiro Shimoda
txt output "differ: byte N, line MMM" [1] https://patchwork.kernel.org/patch/10500775/ Changes from v1: - Rebase the latest slave-dma / next branch. - Fix the subsystem name in each subject. - Minor fix the commit log in patch 2. Yoshihiro Shimoda (2): dmaengine: sh: rcar-dm

RE: [PATCH v6] usb: gadget: udc: renesas_usb3: Add register of usb role switch

2018-07-08 Thread Yoshihiro Shimoda
Hi Felipe-san, Would you review this patch? Best regards, Yoshihiro Shimoda > From: Heikki Krogerus, Sent: Monday, June 11, 2018 11:09 PM > > On Thu, May 31, 2018 at 03:11:33PM +0900, Yoshihiro Shimoda wrote: > > This patch adds role switch support for R-Car SoCs i

[PATCH] iommu/ipmmu-vmsa: IMUCTRn.TTSEL needs a special usage on R-Car Gen3

2018-07-08 Thread Yoshihiro Shimoda
MU context number 0 as the unused MMU context. Signed-off-by: Yoshihiro Shimoda --- drivers/iommu/ipmmu-vmsa.c | 8 1 file changed, 8 insertions(+) diff --git a/drivers/iommu/ipmmu-vmsa.c b/drivers/iommu/ipmmu-vmsa.c index 6a0e714..6cbd2bd 100644 --- a/drivers/iommu/ipmmu-vmsa.c +++

[PATCH] pinctrl: sh-pfc: r8a77990: Add USB3.0 pins, groups and functions

2018-07-03 Thread Yoshihiro Shimoda
From: Takeshi Kihara This patch adds USB30_{PWEN,OVC} and USB3HS0_ID pins, groups and functions to the R8A77990 SoC. Signed-off-by: Yoshihiro Shimoda --- drivers/pinctrl/sh-pfc/pfc-r8a77990.c | 27 +++ 1 file changed, 27 insertions(+) diff --git a/drivers/pinctrl/sh

[PATCH 0/2] dma: sh: rcar-dmac: Add dma_pause operation

2018-07-02 Thread Yoshihiro Shimoda
txt output "differ: byte N, line MMM" [1] https://patchwork.kernel.org/patch/10500775/ Yoshihiro Shimoda (2): dma: sh: rcar-dmac: add a new function to clear CHCR.DE with barrier dma: sh: rcar-dmac: Add dma_pause operation drivers/dma/sh/rcar-dmac.c | 27 ++

[PATCH 1/2] dma: sh: rcar-dmac: add a new function to clear CHCR.DE with barrier

2018-07-02 Thread Yoshihiro Shimoda
This patch adds a new function rcar_dmac_clear_chcr_de() to simplify adding pause function later. Signed-off-by: Yoshihiro Shimoda --- drivers/dma/sh/rcar-dmac.c | 15 +++ 1 file changed, 11 insertions(+), 4 deletions(-) diff --git a/drivers/dma/sh/rcar-dmac.c b/drivers/dma/sh/rcar

[PATCH 2/2] dma: sh: rcar-dmac: Add dma_pause operation

2018-07-02 Thread Yoshihiro Shimoda
] is not true: In rx_timer_fn() of the sh-sci.c: dmaengine_pause(); ... dmaengine_tx_status(); /* [1] */ ... dmaengine_terminate_all() /* [2] */ Signed-off-by: Yoshihiro Shimoda --- drivers/dma/sh/rcar-dmac.c | 12 1 file

[PATCH] dma: sh: rcar-dmac: avoid to write CHCR.TE to 1 if TCR is set to 0

2018-07-02 Thread Yoshihiro Shimoda
red if CHCR::DE bit was cleared". So, this patch doesn't need to check TCRB register. Fixes: 73a47bd0da66 ("dmaengine: rcar-dmac: use TCRB instead of TCR for residue") Signed-off-by: Yoshihiro Shimoda --- This patch is based on the latest slave-dma / fixes branch. This issue can

[PATCH v2 2/2] mmc: renesas_sdhi_internal_dmac: Cannot clear the RX_IN_USE in abort

2018-06-29 Thread Yoshihiro Shimoda
dma() anyway. This doesn't cause any side effects. Fixes: 0cbc94daa554 ("mmc: renesas_sdhi_internal_dmac: limit DMA RX for old SoCs") Cc: # v4.17+ Signed-off-by: Yoshihiro Shimoda Reviewed-by: Geert Uytterhoeven --- drivers/mmc/host/renesas_sdhi_internal_dmac.c | 3 +-- 1 file changed

[PATCH v2 0/2] mmc: renesas_sdhi_internal_dmac: fix two issues for error path

2018-06-29 Thread Yoshihiro Shimoda
This patch set is based on the mmc.git / fixes branch. Changes from v1: - Add Reviewed-by Geert-san. - Add a new goto label for error path. Yoshihiro Shimoda (2): mmc: renesas_sdhi_internal_dmac: Fix missing unmap in error patch mmc: renesas_sdhi_internal_dmac: Cannot clear the RX_IN_USE

[PATCH v2 1/2] mmc: renesas_sdhi_internal_dmac: Fix missing unmap in error patch

2018-06-29 Thread Yoshihiro Shimoda
This patch fixes an issue that lacks the dma_unmap_sg() calling in the error patch of renesas_sdhi_internal_dmac_start_dma(). Fixes: 0cbc94daa554 ("mmc: renesas_sdhi_internal_dmac: limit DMA RX for old SoCs") Cc: # v4.17+ Signed-off-by: Yoshihiro Shimoda Reviewed-by: Geert Uy

RE: [PATCH 1/2] mmc: renesas_sdhi_internal_dmac: Fix missing unmap in error patch

2018-06-29 Thread Yoshihiro Shimoda
Hi Geert-san, > From: Geert Uytterhoeven, Sent: Thursday, June 28, 2018 9:50 PM > > Hi Shimoda-san, > > On Thu, Jun 28, 2018 at 1:53 PM Yoshihiro Shimoda > wrote: > > This patch fixes an issue that lacks the dma_unmap_sg() calling in > > the error patch of renesa

[PATCH 1/2] mmc: renesas_sdhi_internal_dmac: Fix missing unmap in error patch

2018-06-28 Thread Yoshihiro Shimoda
This patch fixes an issue that lacks the dma_unmap_sg() calling in the error patch of renesas_sdhi_internal_dmac_start_dma(). Fixes: 0cbc94daa554 ("mmc: renesas_sdhi_internal_dmac: limit DMA RX for old SoCs") Cc: # v4.17+ Signed-off-by: Yoshihiro Shimoda --- driver

[PATCH 2/2] mmc: renesas_sdhi_internal_dmac: Cannot clear the RX_IN_USE in abort

2018-06-28 Thread Yoshihiro Shimoda
dma() anyway. This doesn't cause any side effects. Fixes: 0cbc94daa554 ("mmc: renesas_sdhi_internal_dmac: limit DMA RX for old SoCs") Cc: # v4.17+ Signed-off-by: Yoshihiro Shimoda --- drivers/mmc/host/renesas_sdhi_internal_dmac.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-

[PATCH 0/2] mmc: renesas_sdhi_internal_dmac: fix two issues for error path

2018-06-28 Thread Yoshihiro Shimoda
This patch set is based on the mmc.git / fixes branch. Yoshihiro Shimoda (2): mmc: renesas_sdhi_internal_dmac: Fix missing unmap in error patch mmc: renesas_sdhi_internal_dmac: Cannot clear the RX_IN_USE in abort drivers/mmc/host/renesas_sdhi_internal_dmac.c | 8 +--- 1 file changed, 5

RE: [RFC PATCH 1/1] i2c: rcar: handle RXDMA HW bug on Gen3

2018-06-27 Thread Yoshihiro Shimoda
gt; > Calling reset_control_status() from i2c-rcar is fine for me. > > < snip > > > Where is this special handling documented BTW, I can't find it. Please refer to "57.5.4 Usage note for the transmission and reception procedure" in the datasheet Rev. 1.00. I agree waiting for maximum 1024ms > The BSP waits for maximum 1024ms which seems excessive to me. The BSP waits for maximum 1024us, not 1024ms. Best regards, Yoshihiro Shimoda

RE: [RFC PATCH 1/1] i2c: rcar: handle RXDMA HW bug on Gen3

2018-06-26 Thread Yoshihiro Shimoda
Hi Geert-san, > From: Geert Uytterhoeven, Sent: Tuesday, June 26, 2018 5:58 PM > > Hi Shimoda-san, > > On Tue, Jun 26, 2018 at 10:38 AM Yoshihiro Shimoda > wrote: > > > From: Wolfram Sang , Sent: Tuesday, June 26, 2018 > > > 12:05 PM > >

RE: [RFC PATCH 1/1] i2c: rcar: handle RXDMA HW bug on Gen3

2018-06-26 Thread Yoshihiro Shimoda
he check (that means procedure C) is not needed. > > Probably because 35µs is an upper limit satisfying all individual hardware > > modules? > > > > I'm wondering whether we could use procedure B in the general case, > > as it explicitly checks for completion? > > > > Procedure C is safest, though, so probably the way to go. > > Any news about this topic? > > And how to upstream all this? My I2C patch is clearly a bugfix, but the > necessary CPG update technically isn't? Not sure about this one... I think we have to add reset_control_status() calling into the i2c-rcar.c to follow procedure B. But, Geert-san, what do you think? Best regards, Yoshihiro Shimoda

RE: [PATCH 1/3] arm64: dts: renesas: convert to SPDX identifiers

2018-06-11 Thread Yoshihiro Shimoda
80608-v4.17 and this r8a7796 cannot be applied because conflict happened. So, I guess you need rebase. After rebased: Acked-by: Yoshihiro Shimoda Best regards, Yoshihiro Shimoda > arch/arm64/boot/dts/renesas/r8a77970-eagle.dts | 5 + > arch/arm64/boot/dts/renesas/r8a7797

RE: [PATCH 2/3] ARM: dts: convert to SPDX identifier for Renesas boards

2018-06-11 Thread Yoshihiro Shimoda
Hi Wolfram-san, > From: Wolfram Sang, Sent: Monday, June 11, 2018 11:50 PM > > Signed-off-by: Wolfram Sang > --- This patch looks good. So, Acked-by: Yoshihiro Shimoda Best regards, Yoshihiro Shimoda > arch/arm/boot/dts/emev2-kzm9d.dts | 5 + >

RE: [PATCH 3/3] ARM: shmobile: convert to SPDX identifier

2018-06-11 Thread Yoshihiro Shimoda
rch/arm/mach-shmobile/platsmp-apmu.c | 5 + > arch/arm/mach-shmobile/platsmp-apmu.h | 10 +- I tried to apply this patch on renesas-devel-20180608-v4.17 and platsmp-apmu.h and other files were removed. So, I guess you need rebase. After rebased: Acked-by:

RE: [PATCH v2] arm64: dts: renesas: r8a77990: Enable USB2.0 Host for Ebisu board

2018-06-11 Thread Yoshihiro Shimoda
Hi Simon-san, > From: Simon Horman, Sent: Friday, June 8, 2018 5:19 PM > > On Wed, Jun 06, 2018 at 06:52:06PM +0900, Yoshihiro Shimoda wrote: > > This patch adds USB2.0 PHY and Host(EHCI/OHCI) nodes and > > enables them for R-Car E3 Ebisu board. > > > >

RE: [RFC PATCH 1/1] i2c: rcar: handle RXDMA HW bug on Gen3

2018-06-06 Thread Yoshihiro Shimoda
Hi Geert-san, > From: Yoshihiro Shimoda, Sent: Thursday, May 31, 2018 6:12 PM > > Hi Geert-san, Wolfram-san, > > > From: Geert Uytterhoeven, Sent: Thursday, May 31, 2018 5:45 PM > > > > Hi Shimoda-san, > > > > On Wed, May 30, 2018 at 10:35 AM, Yoshihir

RE: [PATCH] soc: renesas: rcar-sysc: Make PM domain initialization more robust

2018-06-06 Thread Yoshihiro Shimoda
s is "off-0". - "3dg-b" doesn't have any slaves. < After applied the patch > - "3dg-b's" status is "on". - "3dg-b" has "3dg-a" slave. So, Tested-by: Yoshihiro Shimoda Best regards, Yoshihiro Shimoda > > Reviewed-by:

[PATCH v2] arm64: dts: renesas: r8a77990: Enable USB2.0 Host for Ebisu board

2018-06-06 Thread Yoshihiro Shimoda
This patch adds USB2.0 PHY and Host(EHCI/OHCI) nodes and enables them for R-Car E3 Ebisu board. Signed-off-by: Yoshihiro Shimoda --- This patch set is based on renesas-drivers.git / renesas-drivers-2018-06-05-v4.17 tag. Changes from v1: - Squash 4 patches into a single patch. arch/arm64/boot

RE: [PATCH 0/4] arm64: dts: renesas: r8a77990 and ebisu: Enable USB2.0 host

2018-06-06 Thread Yoshihiro Shimoda
Hi Simon-san, > From: Simon Horman, Sent: Wednesday, June 6, 2018 6:16 PM > > On Wed, Jun 06, 2018 at 03:56:07PM +0900, Yoshihiro Shimoda wrote: > > This patch set is based on renesas-drivers.git / > > renesas-drivers-2018-06-05-v4.17 tag. > > > > About dt-bindi

[PATCH 3/4] arm64: dts: renesas: r8a77990: ebisu: enable usb2_phy0

2018-06-06 Thread Yoshihiro Shimoda
This patch enables usb2_phy0 for r8a77990 Ebisu board. Signed-off-by: Yoshihiro Shimoda --- arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts | 12 1 file changed, 12 insertions(+) diff --git a/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts b/arch/arm64/boot/dts/renesas/r8a77990

[PATCH 4/4] arm64: dts: renesas: r8a77990: ebisu: enable USB2.0 host

2018-06-06 Thread Yoshihiro Shimoda
This patch enables USB2.0 host (EHCI/OHCI) for r8a77990 Ebisu board. Signed-off-by: Yoshihiro Shimoda --- arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts | 8 1 file changed, 8 insertions(+) diff --git a/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts b/arch/arm64/boot/dts/renesas

[PATCH 2/4] arm64: dts: renesas: r8a77990: add USB2.0 host device nodes

2018-06-06 Thread Yoshihiro Shimoda
This patch adds USB2.0 host(EHCI/OHCI) device nodes for r8a77990. Signed-off-by: Yoshihiro Shimoda --- arch/arm64/boot/dts/renesas/r8a77990.dtsi | 25 + 1 file changed, 25 insertions(+) diff --git a/arch/arm64/boot/dts/renesas/r8a77990.dtsi b/arch/arm64/boot/dts

[PATCH 1/4] arm64: dts: renesas: r8a77990: add usb2_phy device node

2018-06-06 Thread Yoshihiro Shimoda
This patch adds USB2.0 phy device node for r8a77990. Signed-off-by: Yoshihiro Shimoda --- arch/arm64/boot/dts/renesas/r8a77990.dtsi | 12 1 file changed, 12 insertions(+) diff --git a/arch/arm64/boot/dts/renesas/r8a77990.dtsi b/arch/arm64/boot/dts/renesas/r8a77990.dtsi index

[PATCH 0/4] arm64: dts: renesas: r8a77990 and ebisu: Enable USB2.0 host

2018-06-06 Thread Yoshihiro Shimoda
e "renesas,rcar-gen3-usb2-phy" can bind the driver. Also, for now, I don't try to add/enable USB2.0 peripheral on the board because the phy driver needs some modifications. Yoshihiro Shimoda (4): arm64: dts: renesas: r8a77990: add usb2_phy device node arm64: dts: renesas: r8a77990: ad

[PATCH 0/2] pinctrl: sh-pfc: r8a77990: Add USB2.0 pins, groups and funcrions

2018-06-06 Thread Yoshihiro Shimoda
This patch set is based on renesas-drivers.git / renesas-drivers-2018-06-05-v4.17 tag. Takeshi Kihara (1): pinctrl: sh-pfc: r8a77990: Add USB2.0 pins, groups and functions Yoshihiro Shimoda (1): pinctrl: sh-pfc: r8a77990: Revise USB ID pin name drivers/pinctrl/sh-pfc/pfc-r8a77990.c | 42

[PATCH 1/2] pinctrl: sh-pfc: r8a77990: Revise USB ID pin name

2018-06-06 Thread Yoshihiro Shimoda
Since the datasheet Rev.1.00 has an error about the USB ID pin name, this patch revises it. Signed-off-by: Yoshihiro Shimoda --- drivers/pinctrl/sh-pfc/pfc-r8a77990.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/pinctrl/sh-pfc/pfc-r8a77990.c b/drivers/pinctrl

[PATCH 2/2] pinctrl: sh-pfc: r8a77990: Add USB2.0 pins, groups and functions

2018-06-06 Thread Yoshihiro Shimoda
From: Takeshi Kihara This patch adds USB0_{PWEN,OVC}_{A,B} and USB0_ID pins, groups and functions to the R8A77990 SoC. Signed-off-by: Takeshi Kihara Signed-off-by: Yoshihiro Shimoda --- drivers/pinctrl/sh-pfc/pfc-r8a77990.c | 38 +++ 1 file changed, 38

  1   2   3   4   5   6   7   8   9   >