From: Jean-Michel Hautbois
The ADV7604 has thirteen 256-byte maps that can be accessed via the main
I²C ports. Each map has it own I²C address and acts as a standard slave
device on the I²C bus.
Allow a device tree node to override the default addresses so that
address conflicts with other devices on the same bus may be resolved at
the board description level.
Signed-off-by: Jean-Michel Hautbois
[Kieran: Re-adapted for mainline]
Signed-off-by: Kieran Bingham
---
Based upon the original posting :
https://lkml.org/lkml/2014/10/22/469
---
.../devicetree/bindings/media/i2c/adv7604.txt | 18 ++-
drivers/media/i2c/adv7604.c| 60 ++
2 files changed, 55 insertions(+), 23 deletions(-)
diff --git a/Documentation/devicetree/bindings/media/i2c/adv7604.txt
b/Documentation/devicetree/bindings/media/i2c/adv7604.txt
index 9cbd92eb5d05..b64e313dcc66 100644
--- a/Documentation/devicetree/bindings/media/i2c/adv7604.txt
+++ b/Documentation/devicetree/bindings/media/i2c/adv7604.txt
@@ -13,7 +13,11 @@ Required Properties:
- "adi,adv7611" for the ADV7611
- "adi,adv7612" for the ADV7612
- - reg: I2C slave address
+ - reg: I2C slave addresses
+The ADV76xx has up to thirteen 256-byte maps that can be accessed via the
+main I²C ports. Each map has it own I²C address and acts as a standard
+slave device on the I²C bus. The main address is mandatory, others are
+optional and revert to defaults if not specified.
- hpd-gpios: References to the GPIOs that control the HDMI hot-plug
detection pins, one per HDMI input. The active flag indicates the GPIO
@@ -35,6 +39,11 @@ Optional Properties:
- reset-gpios: Reference to the GPIO connected to the device's reset pin.
- default-input: Select which input is selected after reset.
+ - reg-names : Names of maps with programmable addresses.
+ It can contain any map needing a non-default address.
+ Possible maps names are :
+ "main", "avlink", "cec", "infoframe", "esdp", "dpp", "afe",
+ "rep", "edid", "hdmi", "test", "cp", "vdp"
Optional Endpoint Properties:
@@ -52,7 +61,12 @@ Example:
hdmi_receiver@4c {
compatible = "adi,adv7611";
- reg = <0x4c>;
+ /*
+* The edid page will be accessible @ 0x66 on the i2c bus. All
+* other maps will retain their default addresses.
+*/
+ reg = <0x4c 0x66>;
+ reg-names "main", "edid";
reset-gpios = < 0 GPIO_ACTIVE_LOW>;
hpd-gpios = < 2 GPIO_ACTIVE_HIGH>;
diff --git a/drivers/media/i2c/adv7604.c b/drivers/media/i2c/adv7604.c
index 1544920ec52d..c346b9a8fb57 100644
--- a/drivers/media/i2c/adv7604.c
+++ b/drivers/media/i2c/adv7604.c
@@ -2734,6 +2734,27 @@ static const struct v4l2_ctrl_config
adv76xx_ctrl_free_run_color = {
/* --- */
+struct adv76xx_register {
+ const char *name;
+ u8 default_addr;
+};
+
+static const struct adv76xx_register adv76xx_secondary_names[] = {
+ [ADV76XX_PAGE_IO] = { "main", 0x4c },
+ [ADV7604_PAGE_AVLINK] = { "avlink", 0x42 },
+ [ADV76XX_PAGE_CEC] = { "cec", 0x40 },
+ [ADV76XX_PAGE_INFOFRAME] = { "infoframe", 0x3e },
+ [ADV7604_PAGE_ESDP] = { "esdp", 0x38 },
+ [ADV7604_PAGE_DPP] = { "dpp", 0x3c },
+ [ADV76XX_PAGE_AFE] = { "afe", 0x26 },
+ [ADV76XX_PAGE_REP] = { "rep", 0x32 },
+ [ADV76XX_PAGE_EDID] = { "edid", 0x36 },
+ [ADV76XX_PAGE_HDMI] = { "hdmi", 0x34 },
+ [ADV76XX_PAGE_TEST] = { "test", 0x30 },
+ [ADV76XX_PAGE_CP] = { "cp", 0x22 },
+ [ADV7604_PAGE_VDP] = { "vdp", 0x24 },
+};
+
static int adv76xx_core_init(struct v4l2_subdev *sd)
{
struct adv76xx_state *state = to_state(sd);
@@ -2834,13 +2855,26 @@ static void adv76xx_unregister_clients(struct
adv76xx_state *state)
}
static struct i2c_client *adv76xx_dummy_client(struct v4l2_subdev *sd,
- u8 addr, u8 io_reg)
+ unsigned int i)
{
struct i2c_client *client = v4l2_get_subdevdata(sd);
+ struct adv76xx_state *state = to_state(sd);
+ struct adv76xx_platform_data *pdata = >pdata;
+ unsigned int io_reg = 0xf2 + i;
+ struct i2c_client *new_client;
+
+ if (pdata && pdata->i2c_addresses[i])
+ new_client = i2c_new_dummy(client->adapter,
+ pdata->i2c_addresses[i]);
+ else
+ new_client = i2c_new_secondary_device(client,
+ adv76xx_secondary_names[i].name,
+ adv76xx_secondary_names[i].default_addr);
- if (addr)
-