From: Wolfram Sang
Here are the DTS changes to enable the on-board eMMC memory at 8 bit bus
widths on R-Car Gen3 Salvator-X boards.
Note that 'non-removable' is not supported yet because of Runtime PM issues. It
seems we need to overhaul Runtime PM handling for other reasons as well, so I
suggest the basic support goes in like this and DTS do not use 'non-removable'
for now.
Note also that I decided to use the pattern that pinctrl-0 is 3.3v and
pinctrl-1 is 1.8v, although the eMMC is fixed at 1.8v. I tried a few ways to
only use pinctrl-0 being 1.8v here, but they all ended up to be confusing for
users IMO, so I sticked to the most consistent solution after all.
These patches are based on top of Simon's sdr104-v7 patches and the accompanied
driver patches sent a minute ago. A branch can be found here:
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux.git
renesas/topic/sdhi-8bit-emmc
Please review, comment, apply...
Wolfram
Wolfram Sang (2):
arm64: dts: r8a7795: salvator: enable on-board eMMC
arm64: dts: r8a7796: salvator: enable on board eMMC
arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts | 43 +
arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts | 44 +-
2 files changed, 86 insertions(+), 1 deletion(-)
--
2.9.3