On 20 May 2014 10:41, Rahul Sharma rahul.sha...@samsung.com wrote:
Thanks Kukjin,
I have changed it in my environment now.
Kukjin,
dp_hpd_gpio got accidentally merged to pinctrl_3 in your for-next
branch. It should
be in pinctrl_0.
/*/
};
dp_hpd_gpio:
From: David Hendricks dhend...@chromium.org
To avoid spamming the EC we calculate the time between the previous
transfer and the current transfer and force a delay if the time delta
is too small.
However, a small miscalculation causes the delay period to be
far too short. Most noticably
Code looks good, so
Reviewed-by: Wolfram Sang w...@the-dreams.de
I don't mind how it gets upstream. I can take it, but you can also keep
it in this series.
Let's keep the series together. Are you happy with me just merging it
through MFD, or would you like a
On Wed, 30 Apr 2014, Doug Anderson wrote:
The main transfer function for cros_ec_spi can be called by more than
one client at a time. Make sure that those clients don't stomp on
each other by locking the bus for the duration of the transfer
function.
Signed-off-by: Doug Anderson
On Wed, 30 Apr 2014, Doug Anderson wrote:
The cros_ec_spi transfer had two problems with its timeout code:
1. It looked at the timeout even in the case that it found valid data.
2. If the cros_ec_spi code got switched out for a while, it's possible
it could get a timeout after a single
On Wed, 30 Apr 2014, Doug Anderson wrote:
We're adding i2c tunneling to the list of things that goes over
cros_ec. i2c tunneling can be slooow, so increase our deadline to
100ms to account for that.
Signed-off-by: Doug Anderson diand...@chromium.org
Acked-by: Lee Jones
On Wed, 30 Apr 2014, Doug Anderson wrote:
From: Bill Richardson wfric...@chromium.org
This just updates include/linux/mfd/cros_ec_commands.h to match the
latest EC version (which is the One True Source for such things). See
https://chromium.googlesource.com/chromiumos/platform/ec
On Wed, 30 Apr 2014, Doug Anderson wrote:
On ARM Chromebooks we have a few devices that are accessed by both the
AP (the main Application Processor) and the EC (the Embedded
Controller). These are:
* The battery (sbs-battery).
* The power management unit tps65090.
On the original Samsung
This adds the EC i2c tunnel (and devices under it) to the
tegra124-venice2 device tree.
I'll happily take this into the Tegra tree once the patch containing the
binding it uses is applied.
All other patches applied. Take this when ready.
--
Lee Jones
Linaro STMicroelectronics Landing
On 20/05/14 07:14, Tushar Behera wrote:
On 05/19/2014 11:00 PM, Sylwester Nawrocki wrote:
This patch adds support for setting source clock of the Core CLK
of the IIS Multi Audio Interface.
Signed-off-by: Sylwester Nawrocki s.nawro...@samsung.com
---
sound/soc/samsung/i2s.c |4
On 05/14/2014 08:26 AM, YoungJun Cho wrote:
This configuration could be used in MIPI DSI command mode also.
Signed-off-by: YoungJun Cho yj44@samsung.com
Acked-by: Inki Dae inki@samsung.com
Acked-by: Kyungmin Park kyungmin.p...@samsung.com
Reviewed-by: Andrzej Hajda
On 05/14/2014 08:26 AM, YoungJun Cho wrote:
There could be the case that the page flip operation isn't finished correctly
with some abnormal condition such as panel reset. So this patch replaces
wait_event() with wait_event_timeout() to avoid waiting for page flip
completion
infinitely.
On 05/20/2014 02:40 PM, Sylwester Nawrocki wrote:
On 20/05/14 07:14, Tushar Behera wrote:
On 05/19/2014 11:00 PM, Sylwester Nawrocki wrote:
This patch adds support for setting source clock of the Core CLK
of the IIS Multi Audio Interface.
Signed-off-by: Sylwester Nawrocki
On Wed, May 14, 2014 at 2:26 PM, YoungJun Cho yj44@samsung.com wrote:
There could be the case that the page flip operation isn't finished correctly
with some abnormal condition such as panel reset. So this patch replaces
wait_event() with wait_event_timeout() to avoid waiting for page flip
On Monday 19 May 2014 22:32:33 Thierry Reding wrote:
On Mon, May 19, 2014 at 06:22:31PM +0100, Dave Martin wrote:
On Mon, May 19, 2014 at 01:53:37PM +0100, Thierry Reding wrote:
[...]
My understanding here is mostly based on the OpenFirmware working group
proposal for the dma-ranges
On Tue, May 20, 2014 at 11:10:08AM +0200, Sylwester Nawrocki wrote:
So how do you think this should be addressed ? Isn't it better to give
options to the machine drivers to alter these clock settings, rather than
hard coding it in the I2S driver ? Let's not forget it covers multiple
Samsung
This patchset is for supporting multple firmware sub-versions
for MFC. Newer firmwares come with changed interfaces and fixes
without any change in the fw version number.
So this implementation is as per Tomasz Figa's suggestion [1].
[1]
The function s5p_mfc_reload_firmware is exactly same as
s5p_mfc_load_firmware. So removing the duplicate function.
Signed-off-by: Arun Kumar K arun...@samsung.com
---
drivers/media/platform/s5p-mfc/s5p_mfc.c |2 +-
drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c | 33
For MFC firmwares, improved versions with bug fixes and
feature additions are released keeping the firmware version
including major and minor number same. The issue came with
the release of a new MFCv6 firmware with an interface change.
This patch adds the support of accepting multiple firmware
Latest MFC v6 firmware requires tile mode and loop filter
setting to be done as part of Init buffer command, in sync
with v7. This patch adds this support for new v6 firmware.
Signed-off-by: Arun Kumar K arun...@samsung.com
Signed-off-by: Kiran AVND avnd.ki...@samsung.com
---
On 05/14/2014 08:27 AM, YoungJun Cho wrote:
This patch adds MIPI-DSI command mode based S6E3FA0 AMOLED LCD Panel driver.
Signed-off-by: YoungJun Cho yj44@samsung.com
Acked-by: Inki Dae inki@samsung.com
Acked-by: Kyungmin Park kyungmin.p...@samsung.com
Few nitpicks, beside them.
This patch fixed gpio key device node.
First, fix incorrect gpio property.
And then, add ok-key node where locate bottom center.
I have tested on exynos4412-trats2 board.
Signed-off-by: Beomho Seo beomho@samsung.com
Signed-off-by: MyungJoo Ham myungjoo@samsung.com
---
Changes in v3:
-
Exynos4412-trats2 board have light/proximity sensor.
This patch add cm36651 light/ proximity sensor node for exynos4412.
cm36651 is required properties as below.
- Use i2c-gpio for cm36651 sensor.
- Use fixed regulator for the IR LED.
It is a part of the cm36651 for proximity detection.
-
This patchset add some device node for exynos4412-trats2.
It is based on v3.15-next/dt-samsung-2 branch.
exynos4412-trats2.dts
- Fix incorrect compatible. Compatible of AK8975 are ak8975 or
asahi-kasei,ak8975.
- Add cm36651 light/proximity sensor device node.
- Change gpio-key device node. fix
On Tue, May 20, 2014 at 12:04:54PM +0200, Arnd Bergmann wrote:
On Monday 19 May 2014 22:59:46 Thierry Reding wrote:
On Mon, May 19, 2014 at 08:34:07PM +0200, Arnd Bergmann wrote:
On Monday 19 May 2014 14:53:37 Thierry Reding wrote:
On Mon, May 19, 2014 at 12:26:35PM +0200, Arnd Bergmann
On Tuesday 20 May 2014 13:05:37 Thierry Reding wrote:
On Tue, May 20, 2014 at 12:04:54PM +0200, Arnd Bergmann wrote:
On Monday 19 May 2014 22:59:46 Thierry Reding wrote:
On Mon, May 19, 2014 at 08:34:07PM +0200, Arnd Bergmann wrote:
On Monday 19 May 2014 14:53:37 Thierry Reding wrote:
On Tue, May 20, 2014 at 09:55:42AM +0530, Tushar Behera wrote:
For audio to work on Snow board, we need the codec master clock 'mclk'
to be properly configured.
Currently XCLKOUT is configured as 'mclk' for codec chip and it is
required to be clocked at 24MHz for the codec to work properly.
Hi Arun,
On 20 May 2014 15:47, Arun Kumar K arun...@samsung.com wrote:
For MFC firmwares, improved versions with bug fixes and
feature additions are released keeping the firmware version
including major and minor number same. The issue came with
the release of a new MFCv6 firmware with an
On Tue, May 20, 2014 at 01:15:48PM +0200, Arnd Bergmann wrote:
On Tuesday 20 May 2014 13:05:37 Thierry Reding wrote:
On Tue, May 20, 2014 at 12:04:54PM +0200, Arnd Bergmann wrote:
On Monday 19 May 2014 22:59:46 Thierry Reding wrote:
On Mon, May 19, 2014 at 08:34:07PM +0200, Arnd Bergmann
From experiments with real hardware, it seems that URSTCON bits for
HSIC0 and HSIC1 seems to be swapped, so updated macro definitions for
them. HSIC1 also requires enabling power to device phy to get properly
enabled (similar hack is already implemented for HSIC0).
Signed-off-by: Marek Szyprowski
On Tuesday 20 May 2014 14:02:43 Thierry Reding wrote:
On Tue, May 20, 2014 at 01:15:48PM +0200, Arnd Bergmann wrote:
On Tuesday 20 May 2014 13:05:37 Thierry Reding wrote:
On Tue, May 20, 2014 at 12:04:54PM +0200, Arnd Bergmann wrote:
On Monday 19 May 2014 22:59:46 Thierry Reding wrote:
Hello,
This is a small update for Exynos4210 based UniversalC210 and Trats
boards. Full USB support requires merging '[PATCHv5 0/4] Enable usbphy
and hsotg for exynos4' series recently posted by Chanho Park.
Best regards
Marek Szyprowski
Samsung RD Institute Poland
Marek Szyprowski (3):
ARM:
This patch enables support external SD card slot.
Signed-off-by: Marek Szyprowski m.szyprow...@samsung.com
---
arch/arm/boot/dts/exynos4210-universal_c210.dts | 10 ++
1 file changed, 10 insertions(+)
diff --git a/arch/arm/boot/dts/exynos4210-universal_c210.dts
From: Tomasz Figa t.f...@samsung.com
This patch adds device tree nodes necessary to enable USB gadget
functionality on Exynos4210-based Trats board.
Signed-off-by: Tomasz Figa t.f...@samsung.com
Signed-off-by: Marek Szyprowski m.szyprow...@samsung.com
---
arch/arm/boot/dts/exynos4210-trats.dts
This patch enables support for multimedia blocks - fimc in mem2mem mode,
no camera sensors support yet.
Signed-off-by: Marek Szyprowski m.szyprow...@samsung.com
---
arch/arm/boot/dts/exynos4210-universal_c210.dts | 23 +++
1 file changed, 23 insertions(+)
diff --git
This patch adds device tree nodes necessary to enable USB support on
universalc210 board, this includes UDC controller (USB gadget) as well
as EHCI and OHCI host ports. LDO3 and LDO8 regulators are switched to
always on mode until EHCI and OHCI drivers will support them correctly.
Signed-off-by:
On Tue, May 20, 2014 at 12:08:44PM +0200, Arnd Bergmann wrote:
On Monday 19 May 2014 22:32:33 Thierry Reding wrote:
On Mon, May 19, 2014 at 06:22:31PM +0100, Dave Martin wrote:
On Mon, May 19, 2014 at 01:53:37PM +0100, Thierry Reding wrote:
[...]
My understanding here is mostly based
On Tue, May 20, 2014 at 02:41:18PM +0200, Arnd Bergmann wrote:
On Tuesday 20 May 2014 14:02:43 Thierry Reding wrote:
[...]
Couldn't a single-master IOMMU be windowed?
Ah, yes. That would actually be like an IBM pSeries, which has a windowed
IOMMU but uses one window per virtual machine. In
On Tuesday 20 May 2014 14:07:09 Dave Martin wrote:
On Tue, May 20, 2014 at 12:08:44PM +0200, Arnd Bergmann wrote:
On Monday 19 May 2014 22:32:33 Thierry Reding wrote:
On Mon, May 19, 2014 at 06:22:31PM +0100, Dave Martin wrote:
On Mon, May 19, 2014 at 01:53:37PM +0100, Thierry Reding
On Tuesday 20 May 2014 15:17:43 Thierry Reding wrote:
On Tue, May 20, 2014 at 02:41:18PM +0200, Arnd Bergmann wrote:
On Tuesday 20 May 2014 14:02:43 Thierry Reding wrote:
[...]
Couldn't a single-master IOMMU be windowed?
Ah, yes. That would actually be like an IBM pSeries, which has a
Add PMU syscon handle to HDMI dt node for controlling PHY
Enable/Disable bit.
Patch is dependent for following patch for approval on DT
Bindings:
http://www.mail-archive.com/linux-samsung-soc@vger.kernel.org/msg31106.html
It is based on Kukjin's for-next branch.
Rahul Sharma (2):
ARM: dts:
Add PMU syscon handle to HDMI dt node for controlling
PHY Enable/Disable bit.
Signed-off-by: Rahul Sharma rahul.sha...@samsung.com
---
arch/arm/boot/dts/exynos5420.dtsi |1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm/boot/dts/exynos5420.dtsi
b/arch/arm/boot/dts/exynos5420.dtsi
Add PMU syscon handle to HDMI dt node for controlling
PHY Enable/Disable bit.
Signed-off-by: Rahul Sharma rahul.sha...@samsung.com
---
arch/arm/boot/dts/exynos5250.dtsi |1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm/boot/dts/exynos5250.dtsi
b/arch/arm/boot/dts/exynos5250.dtsi
On Tue, May 20, 2014 at 03:34:46PM +0200, Arnd Bergmann wrote:
On Tuesday 20 May 2014 15:17:43 Thierry Reding wrote:
On Tue, May 20, 2014 at 02:41:18PM +0200, Arnd Bergmann wrote:
On Tuesday 20 May 2014 14:02:43 Thierry Reding wrote:
[...]
Couldn't a single-master IOMMU be windowed?
Use the Exynos custom fixed rate clocks registration (for oscillators
connected to the XXTI or XUSBXTI pins) only if fixed-rate-clocks
node is found in device tree. This allows to handle new dtbs with those
clocks described in a generic way and having the fixed-rate-clocks
node removed.
This patch specifies the XXTI and XUSBXTI clock sources as standard
fixed rate clocks and removes the related Exynos custom clock nodes.
Signed-off-by: Sylwester Nawrocki s.nawro...@samsung.com
---
arch/arm/boot/dts/exynos4.dtsi | 14 +-
On Tue, May 20, 2014 at 02:41:18PM +0200, Arnd Bergmann wrote:
On Tuesday 20 May 2014 14:02:43 Thierry Reding wrote:
On Tue, May 20, 2014 at 01:15:48PM +0200, Arnd Bergmann wrote:
On Tuesday 20 May 2014 13:05:37 Thierry Reding wrote:
On Tue, May 20, 2014 at 12:04:54PM +0200, Arnd
On Tue, May 20, 2014 at 02:23:47PM +0100, Arnd Bergmann wrote:
Bit# 3322 1100
10987654 32109876 54321098 76543210
phys.hi cell: npt000ss dfff
phys.mid cell:
phys.lo cell:
On Tue, May 20, 2014 at 04:26:59PM +0100, Will Deacon wrote:
On Tue, May 20, 2014 at 02:23:47PM +0100, Arnd Bergmann wrote:
Bit# 3322 1100
10987654 32109876 54321098 76543210
phys.hi cell: npt000ss dfff
phys.mid cell:
This patch introduces a driver that handles configuration of CLKOUT pin
of Exynos SoCs that can be used to output certain clocks from inside of
the SoC to a dedicated output pin.
Signed-off-by: Tomasz Figa t.f...@samsung.com
---
.../devicetree/bindings/arm/samsung/pmu.txt| 30
This patch extends nodes of PMU system controller on Exynos4210, 4x12,
5250 and 5420 SoCs with newly defined properties used by Exynos CLKOUT
driver.
Signed-off-by: Tomasz Figa t.f...@samsung.com
---
arch/arm/boot/dts/exynos4.dtsi| 1 +
arch/arm/boot/dts/exynos4210.dtsi | 9 +
This patch adds missing definitions of clocks from CPU and DMC clock
domains, which are necessary to properly represent CLKOUT clock hierarchy
added in further patch.
Signed-off-by: Tomasz Figa t.f...@samsung.com
---
drivers/clk/samsung/clk-exynos4.c | 50 +++
On all Exynos SoCs there is a dedicated CLKOUT pin that allows many of
internal SoC clocks to be output from the SoC. The hardware structure
of CLKOUT related clocks looks as follows:
CMU |--- clock0 - | PMU |
| | |
This patch adds definitions of clocks that are used to drive clock
output signals of particular CMU sub-blocks that are then fed to PMU and
handled by Exynos CLKOUT driver added in further patch.
Signed-off-by: Tomasz Figa t.f...@samsung.com
---
drivers/clk/samsung/clk-exynos4.c | 123
On the ARM Chromebook tps65090 has two masters: the AP (the main
processor running linux) and the EC (the embedded controller). The AP
is allowed to mess with FETs but the EC is in charge of charge control.
The tps65090 interupt line is routed to both the AP and the EC, which
can cause quite a
Hi Arun,
On 20.05.2014 12:17, Arun Kumar K wrote:
This patchset is for supporting multple firmware sub-versions
for MFC. Newer firmwares come with changed interfaces and fixes
without any change in the fw version number.
So this implementation is as per Tomasz Figa's suggestion [1].
[1]
Hi Tomasz
What I based my patch on is really because of this line:
if (substream)
snd_pcm_period_elapsed(substream);
Boojin Kim thought that this was needed, if this is true anymore..? I
have not been able to immerse myself so much in all patches.
I'm working on about 100 similar
On 20.05.2014 21:29, Andrew Eikum wrote:
On Tue, May 20, 2014 at 09:16:59PM +0200, Tomasz Figa wrote:
To me having NULL as either data argument of buffer done callback or
private_data would be a serious driver bug and IMHO it's better to let
it crash with a NULL pointer dereference to let
On Tue, May 20, 2014 at 09:16:59PM +0200, Tomasz Figa wrote:
To me having NULL as either data argument of buffer done callback or
private_data would be a serious driver bug and IMHO it's better to let
it crash with a NULL pointer dereference to let someone notice than mask
it by adding a
On Tuesday 20 May 2014 16:24:59 Dave Martin wrote:
On Tue, May 20, 2014 at 02:41:18PM +0200, Arnd Bergmann wrote:
On Tuesday 20 May 2014 14:02:43 Thierry Reding wrote:
On Tue, May 20, 2014 at 01:15:48PM +0200, Arnd Bergmann wrote:
Typical values for the above include:
- #address-cells
On Tuesday 20 May 2014 16:00:02 Thierry Reding wrote:
On Tue, May 20, 2014 at 03:34:46PM +0200, Arnd Bergmann wrote:
On Tuesday 20 May 2014 15:17:43 Thierry Reding wrote:
On Tue, May 20, 2014 at 02:41:18PM +0200, Arnd Bergmann wrote:
On Tuesday 20 May 2014 14:02:43 Thierry Reding wrote:
On Tuesday 20 May 2014 17:39:12 Dave Martin wrote:
On Tue, May 20, 2014 at 04:26:59PM +0100, Will Deacon wrote:
On Tue, May 20, 2014 at 02:23:47PM +0100, Arnd Bergmann wrote:
Bit# 3322 1100
10987654 32109876 54321098 76543210
phys.hi cell:
On 05/20/2014 09:16 PM, Tomasz Figa wrote:
Hi Rickard,
On 20.05.2014 21:12, Rickard Strandqvist wrote:
Hi Tomasz
What I based my patch on is really because of this line:
if (substream)
snd_pcm_period_elapsed(substream);
Boojin Kim thought that this was needed, if this is true
Hi Shaik,
On 20.05.2014 06:08, Shaik Ameer Basha wrote:
Hi Tomasz,
Any comments on this patch ?
Looks good.
Kukjin, if you still can pick this up to your tree for 3.16, since all
the dependencies are already there, then
Acked-by: Tomasz Figa t.f...@samsung.com
If not, I will pick it up to
On Tue, May 20, 2014 at 11:21:08PM +0200, Lars-Peter Clausen wrote:
On 05/20/2014 09:16 PM, Tomasz Figa wrote:
Still, I'm not too experienced with ALSA and ASoC, so I might be wrong.
Mark, what do you think about this?
Given that there is a patch[1] which removes the whole file I think we
Seungwon,
On Mon, May 19, 2014 at 6:51 PM, Seungwon Jeon tgih@samsung.com wrote:
+ } else {
+ /*
+* If we don't have a command
complete now we'll
+* never
If we happened to get a data error at just the wrong time the dw_mmc
driver could get into a state where it would never complete its
request. That would leave the caller just hanging there.
We fix this two ways and both of the two fixes on their own appear to
fix the problems we've seen:
1. Fix
On Mon, May 19, 2014 at 07:30:38PM +0200, Sylwester Nawrocki wrote:
This patch adds support for setting source clock of the Core CLK
of the IIS Multi Audio Interface.
Applied, thanks.
signature.asc
Description: Digital signature
On 20.05.2014 12:48, Beomho Seo wrote:
This patchset add some device node for exynos4412-trats2.
It is based on v3.15-next/dt-samsung-2 branch.
exynos4412-trats2.dts
- Fix incorrect compatible. Compatible of AK8975 are ak8975 or
asahi-kasei,ak8975.
- Add cm36651 light/proximity sensor
Hi Marek,
On 20.05.2014 14:46, Marek Szyprowski wrote:
This patch adds device tree nodes necessary to enable USB support on
universalc210 board, this includes UDC controller (USB gadget) as well
as EHCI and OHCI host ports. LDO3 and LDO8 regulators are switched to
always on mode until EHCI
On 20.05.2014 14:46, Marek Szyprowski wrote:
Hello,
This is a small update for Exynos4210 based UniversalC210 and Trats
boards. Full USB support requires merging '[PATCHv5 0/4] Enable usbphy
and hsotg for exynos4' series recently posted by Chanho Park.
Best regards
Marek Szyprowski
Hi Daniel
Thank you for comments.
On 05/20/2014 07:02 PM, Daniel Kurtz wrote:
On Wed, May 14, 2014 at 2:26 PM, YoungJun Cho yj44@samsung.com wrote:
There could be the case that the page flip operation isn't finished correctly
with some abnormal condition such as panel reset. So this
Adding devres APIs to various files in sound/soc/samsung saves
us close to 150 lines of code.
The patches are based on next-20140519 and have been build tested.
Tushar Behera (4):
ASoC: samsung: Use devm_snd_soc_register_card
ASoC: samsung: Use devm_snd_soc_register_platform
ASoC: samsung:
Replaced snd_soc_register_platform with devm_snd_soc_register_platform
in samsung_asoc_dma_platform_register(). This makes the function
samsung_asoc_dma_platform_unregister() redundant. This is removed and
all its users are updated.
Signed-off-by: Tushar Behera tushar.beh...@linaro.org
---
clk_get in probe function can be safely replaced with devm_clk_get.
Signed-off-by: Tushar Behera tushar.beh...@linaro.org
---
sound/soc/samsung/pcm.c |8 ++--
1 file changed, 2 insertions(+), 6 deletions(-)
diff --git a/sound/soc/samsung/pcm.c b/sound/soc/samsung/pcm.c
index
Replace snd_soc_register_card with devm_snd_soc_register_card.
With this change, we can delete the empty remove functions.
Signed-off-by: Tushar Behera tushar.beh...@linaro.org
---
sound/soc/samsung/bells.c | 16 +++-
sound/soc/samsung/littlemill.c | 18
Replaced snd_soc_register_component with its devres equivalent,
devm_snd_soc_register_component.
Signed-off-by: Tushar Behera tushar.beh...@linaro.org
---
sound/soc/samsung/ac97.c|8 ++--
sound/soc/samsung/goni_wm8994.c |9 +++--
sound/soc/samsung/pcm.c |8
This patch adds relevant to exynos5420 compatible for exynos5420 SoC support.
Signed-off-by: YoungJun Cho yj44@samsung.com
Acked-by: Inki Dae inki@samsung.com
Acked-by: Kyungmin Park kyungmin.p...@samsung.com
---
.../devicetree/bindings/video/exynos_dsim.txt |4 +++-
1 file
This patch adds DT bindings for command mode display timing.
Signed-off-by: YoungJun Cho yj44@samsung.com
Acked-by: Inki Dae inki@samsung.com
Acked-by: Kyungmin Park kyungmin.p...@samsung.com
---
.../bindings/video/cmdmode-display-timing.txt | 64
1 file
This configuration could be used in MIPI DSI command mode also.
Signed-off-by: YoungJun Cho yj44@samsung.com
Acked-by: Inki Dae inki@samsung.com
Acked-by: Kyungmin Park kyungmin.p...@samsung.com
---
drivers/gpu/drm/exynos/exynos_drm_dsi.c |5 +++--
1 file changed, 3 insertions(+), 2
The offset of register DSIM_PLLTMR_REG in Exynos5420 is different
from the one in Exynos4 SoC.
In case of Exynos5420 SoC, there is no frequency band bit in DSIM_PLLCTRL_REG,
and it uses DSIM_PHYCTRL_REG and DSIM_PHYTIMING*_REG instead.
So this patch adds driver data to distinguish it.
This patch adds common part of dsi node.
Signed-off-by: YoungJun Cho yj44@samsung.com
Acked-by: Inki Dae inki@samsung.com
Acked-by: Kyungmin Park kyungmin.p...@samsung.com
---
arch/arm/boot/dts/exynos5420.dtsi | 14 ++
1 file changed, 14 insertions(+)
diff --git
This patch adds sysreg property to fimd device node which is required
to use I80 interface.
Signed-off-by: YoungJun Cho yj44@samsung.com
Acked-by: Inki Dae inki@samsung.com
Acked-by: Kyungmin Park kyungmin.p...@samsung.com
---
arch/arm/boot/dts/exynos4.dtsi |1 +
1 file changed, 1
This patch adds MIPI-DSI command mode based S6E3FA0 AMOLED LCD Panel driver.
Signed-off-by: YoungJun Cho yj44@samsung.com
Acked-by: Inki Dae inki@samsung.com
Acked-by: Kyungmin Park kyungmin.p...@samsung.com
---
drivers/gpu/drm/panel/Kconfig |7 +
To support MIPI DSI command mode interface, FIMD should do followings:
- Sets LCD block configuration for I80 interface.
- Uses lcd_sys as an IRQ resource and sets relevant IRQ configuration.
- Implements trigger feature which transfers image date if there is
page flip request, and implements TE
Hi,
This series is for the Exynos DRM driver to support MIPI DSI command mode
display and based on exynos-drm-next branch.
The previous patches,
RFC: http://www.spinics.net/lists/dri-devel/msg58898.html
V1: http://www.spinics.net/lists/dri-devel/msg59291.html
Changelog v2:
- Rebases for latest
This patch is based on videomode and display_timing relevant codes.
To support command mode panel, it does not need to guide its timing
information to the display controller like video mode panel,
but it requires signal timings to transfer video data.
So this patch adds cmdmode struct,
This patch adds sysreg device node, and sysreg property to fimd device node
which is required to use I80 interface.
Signed-off-by: YoungJun Cho yj44@samsung.com
Acked-by: Inki Dae inki@samsung.com
Acked-by: Kyungmin Park kyungmin.p...@samsung.com
---
arch/arm/boot/dts/exynos5.dtsi |6
This patch adds helper functions to convert cmdmode
to drm_display_mode
Signed-off-by: YoungJun Cho yj44@samsung.com
Acked-by: Inki Dae inki@samsung.com
Acked-by: Kyungmin Park kyungmin.p...@samsung.com
---
drivers/gpu/drm/drm_modes.c | 59 +++
This patch adds mipi-phy node for MIPI-DSI device.
Signed-off-by: YoungJun Cho yj44@samsung.com
Acked-by: Inki Dae inki@samsung.com
Acked-by: Kyungmin Park kyungmin.p...@samsung.com
---
arch/arm/boot/dts/exynos5420.dtsi |6 ++
1 file changed, 6 insertions(+)
diff --git
This patch adds DT bindings for s6e3fa0 panel.
The bindings describes panel resources, display timings and cpu mode timings.
Signed-off-by: YoungJun Cho yj44@samsung.com
Acked-by: Inki Dae inki@samsung.com
Acked-by: Kyungmin Park kyungmin.p...@samsung.com
---
To support command mode interface, the DSI host calls this handler
to notify the panel tearing effect synchronization signal to the
CRTC device manager to trigger to transfer video image.
Signed-off-by: YoungJun Cho yj44@samsung.com
Acked-by: Inki Dae inki@samsung.com
Acked-by: Kyungmin
In case of using MIPI command mode interface panel,
the relevant registers should be set.
So this patch adds relevant DT bindings.
Signed-off-by: YoungJun Cho yj44@samsung.com
Acked-by: Inki Dae inki@samsung.com
Acked-by: Kyungmin Park kyungmin.p...@samsung.com
---
This patch adds relevant to exynos5 compatible for exynos5 SoCs.
Signed-off-by: YoungJun Cho yj44@samsung.com
Acked-by: Inki Dae inki@samsung.com
Acked-by: Kyungmin Park kyungmin.p...@samsung.com
---
.../devicetree/bindings/arm/samsung/sysreg.txt |1 +
1 file changed, 1
To support MIPI DSI command mode interface, the panel should generates
Tearing Effect synchronization signal between MCU and FB to display
video images.
And the display controller should trigger to transfer video image at
this signal.
So the panel receives the TE IRQ, then calls this handler
There could be the case that the page flip operation isn't finished correctly
with some abnormal condition such as panel reset. So this patch replaces
wait_event() with wait_event_timeout() to avoid waiting for page flip completion
infinitely.
And clears exynos_crtc-pending_flip in
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On 05/20/2014 04:46 PM, Mark Brown wrote:
On Tue, May 20, 2014 at 09:55:42AM +0530, Tushar Behera wrote:
For audio to work on Snow board, we need the codec master clock
'mclk' to be properly configured.
Currently XCLKOUT is configured as 'mclk'
97 matches
Mail list logo
