From: Jaehoon Chung
To detect sd-card use the cd-gpio method.
It can decrease the interrupt for detecting sd-card.
Signed-off-by: Jaehoon Chung
Signed-off-by: Anand Moon
---
Changes based on
Added support for vmmc/vqmmc-supply for emmc/sd cards.
Fixed the min values for regulator ldo13_reg (VDDQ_MMC2).
Added ramp-delay for LDO9(VDD33_USB3_0).
Added ramp-delay for LDO13(VDDQ_MMC2).
Added ramp-delay for LDO15(ETH_P3V3).
Signed-off-by: Anand Moon
---
Changes
Added support for UHS-I bus speed 50MB/s (SDR50, DDR50) 104MB/s (SDR104)
Signed-off-by: Anand Moon
---
Changes based on
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung.git
v4.4-next/dt-samsung branch
Changes Fixed the UHS-I bus speed detedtion on cold
Probably also interesting for you:
~$ zcat /proc/config.gz | grep CONFIG_DRM_EXYNOS
CONFIG_DRM_EXYNOS=m
CONFIG_DRM_EXYNOS_IOMMU=y
CONFIG_DRM_EXYNOS_FIMD=y
CONFIG_DRM_EXYNOS5433_DECON=y
CONFIG_DRM_EXYNOS7_DECON=y
CONFIG_DRM_EXYNOS_DPI=y
CONFIG_DRM_EXYNOS_DSI=y
CONFIG_DRM_EXYNOS_DP=y
Odroid XU4 has a RTL8153-CG gigabit Ethernet adapter, connected over
USB 3.0.
Signed-off-by: Anand Moon
Reviewed-by: Krzysztof Kozlowski
---
Changes: Fixed the commit message thanks to Krzysztof KozlowskAdded reviewed by
Krzysztof Kozlowski
Odroid XU4 has a RTL8153-CG gigabit Ethernet adapter, connected over
USB 3.0.
Signed-off-by: Anand Moon
Reviewed-by: Krzysztof Kozlowski
---
Changes: Fixed the commit message thanks to Krzysztof Kozlowski
Added reviewed by Krzysztof
Mans,
On Fri, 9 Oct 2015, Mans Rullgard wrote:
> This passes a data pointer specified in the sched_clock_register()
> call to the read callback allowing simpler implementations thereof.
>
> In this patch, existing uses of this interface are simply updated
> with a null pointer.
I can't see any
Hi Mauro,
On Sun, Aug 30, 2015 at 12:06:43AM -0300, Mauro Carvalho Chehab wrote:
> Instead of relying on media subtype, use the new macros to detect
> if an entity is a subdev or an A/V DMA entity.
>
> Please note that most drivers assume that there's just AV_DMA or
> V4L2 subdevs. This is not
Hi Krzysztof,
On 10/10/2015 11:46 PM, Yakir Yang wrote:
Both hsync/vsync polarity and interlace mode can be parsed from
drm display mode, and dynamic_range and ycbcr_coeff can be judge
by the video code.
But presumably Exynos still relies on the DT properties, so take
good use of mode_fixup()
On 12.10.2015 09:37, Yakir Yang wrote:
> Hi Krzysztof,
>
> On 10/10/2015 11:46 PM, Yakir Yang wrote:
>> Both hsync/vsync polarity and interlace mode can be parsed from
>> drm display mode, and dynamic_range and ycbcr_coeff can be judge
>> by the video code.
>>
>> But presumably Exynos still
Em Mon, 12 Oct 2015 00:07:52 +0300
Sakari Ailus escreveu:
> Hi Mauro,
>
> On Sun, Aug 30, 2015 at 12:06:43AM -0300, Mauro Carvalho Chehab wrote:
> > Instead of relying on media subtype, use the new macros to detect
> > if an entity is a subdev or an A/V DMA entity.
> >
> >
On each next iteration of for_each_compatible_node() the reference
counter for current device node is already decreased by the loop
iterator. The manual call to of_node_get() is required only on loop
break which is not happening here.
The double of_node_get() (with enabled CONFIG_OF_DYNAMIC) lead
On 12.10.2015 00:46, Anand Moon wrote:
> From: Jaehoon Chung
>
> To detect sd-card use the cd-gpio method.
> It can decrease the interrupt for detecting sd-card.
>
> Signed-off-by: Jaehoon Chung
> Signed-off-by: Anand Moon
On 12.10.2015 00:46, Anand Moon wrote:
> Added support for vmmc/vqmmc-supply for emmc/sd cards.
> Fixed the min values for regulator ldo13_reg (VDDQ_MMC2).
I can't see the description of a problem which is fixed. If you fix
something, then please describe what is wrong.
> Added ramp-delay for
Hi,
On 10/12/2015 01:29 PM, Krzysztof Kozlowski wrote:
> On 12.10.2015 00:46, Anand Moon wrote:
>> From: Jaehoon Chung
>>
>> To detect sd-card use the cd-gpio method.
>> It can decrease the interrupt for detecting sd-card.
>>
>> Signed-off-by: Jaehoon Chung
On 12.10.2015 00:46, Anand Moon wrote:
> Added support for UHS-I bus speed 50MB/s (SDR50, DDR50) 104MB/s (SDR104)
This description is not entirely correct. The MMC driver already
supports these UHS speeds (you did not any code) so you rather enabled
it (description of bindings says "is
On 10/12/2015 08:49 AM, Krzysztof Kozlowski wrote:
On 12.10.2015 09:37, Yakir Yang wrote:
Hi Krzysztof,
On 10/10/2015 11:46 PM, Yakir Yang wrote:
Both hsync/vsync polarity and interlace mode can be parsed from
drm display mode, and dynamic_range and ycbcr_coeff can be judge
by the video
On 12.10.2015 13:09, Yakir Yang wrote:
>
>
> On 10/12/2015 11:51 AM, Krzysztof Kozlowski wrote:
>> On 12.10.2015 11:43, Yakir Yang wrote:
>>> On 10/12/2015 08:49 AM, Krzysztof Kozlowski wrote:
On 12.10.2015 09:37, Yakir Yang wrote:
> Hi Krzysztof,
>
> On 10/10/2015 11:46 PM,
Both hsync/vsync polarity and interlace mode can be parsed from
drm display mode, and dynamic_range and ycbcr_coeff can be judge
by the video code.
But presumably Exynos still relies on the DT properties, so take
good use of mode_fixup() in to achieve the compatibility hacks.
Signed-off-by:
On 10/12/2015 11:51 AM, Krzysztof Kozlowski wrote:
On 12.10.2015 11:43, Yakir Yang wrote:
On 10/12/2015 08:49 AM, Krzysztof Kozlowski wrote:
On 12.10.2015 09:37, Yakir Yang wrote:
Hi Krzysztof,
On 10/10/2015 11:46 PM, Yakir Yang wrote:
Both hsync/vsync polarity and interlace mode can be
On 12.10.2015 11:43, Yakir Yang wrote:
>
>
> On 10/12/2015 08:49 AM, Krzysztof Kozlowski wrote:
>> On 12.10.2015 09:37, Yakir Yang wrote:
>>> Hi Krzysztof,
>>>
>>> On 10/10/2015 11:46 PM, Yakir Yang wrote:
Both hsync/vsync polarity and interlace mode can be parsed from
drm display
21 matches
Mail list logo