On Thu, Sep 30, 2010 at 2:40 PM, Jeongbae Seo jeongbae@samsung.com wrote:
Chris wrote:
Hi Kyungmin, Ben,
On Thu, Sep 30, 2010 at 10:18:12AM +0900, Kyungmin Park wrote:
On Sat, Sep 18, 2010 at 12:59 AM, Chris Ball c...@laptop.org wrote:
Hi,
On Thu, Sep 16, 2010 at 06:08:28PM
This patch adds common code to enable support of gpio interrupts on s5p
series.
The total number of gpio pins is quite large on s5p series. Registering
irq support for all of them would be a resource waste. Because of that
the interrupt support for standard gpio pins is registered dynamically
by
Samsung S5P series have the same interrupt type defines for both
external interrupts and gpio interrupts. This patch removes all
duplicates from s5pc100 and s5pv210 specific includes as well as gpio
int code and put a common defines to plat/irqs.h
Signed-off-by: Marek Szyprowski
Marek Szyprowski wrote:
Hello,
Hi,
(snip)
Ok..firstly looks ok to me now.
But I don't know...in the future may have to revert back due to S5P64XX.
Well, these defines are used only by plat-s5p/irq-{eint,gpioint}.c. These
generic
functions cannot be used for S5P64XX anyway, because
Marek Szyprowski wrote:
This patch adds common code to enable support of gpio interrupts on s5p
series.
The total number of gpio pins is quite large on s5p series. Registering
irq support for all of them would be a resource waste. Because of that
the interrupt support for standard gpio
S3C2440 style I2C controller uses PCLK to calculate the SDA line delay.
The driver wrongly assumed that this delay is calculated from the
frequency that the controller is operating on. This patch fixes this
issue.
Signed-off-by: Marek Szyprowski m.szyprow...@samsung.com
Signed-off-by: Kyungmin
From: MyungJoo Ham myungjoo@samsung.com
S3C2440 style I2C controller uses PCLK to calculate the SDA line delay.
The driver wrongly assumed that this delay is calculated from the
frequency that the controller is operating on. This patch fixes this
issue.
Signed-off-by: MyungJoo Ham
On Wed, Sep 29, 2010 at 4:58 AM, Kukjin Kim kgene@samsung.com wrote:
Kukjin Kim wrote:
From: Changhwan Youn chaos.y...@samsung.com
This patch updates CPU hotplug implementation to reduce CPU power
consumption
and will turn off the CPU power when CPU1 is unplugged while previous CPU
On Thu, Sep 30, 2010 at 10:02:37AM -0700, Colin Cross wrote:
On Wed, Sep 29, 2010 at 4:58 AM, Kukjin Kim kgene@samsung.com wrote:
Kukjin Kim wrote:
From: Changhwan Youn chaos.y...@samsung.com
This patch updates CPU hotplug implementation to reduce CPU power
consumption
and will
Jassi Brar wrote:
On Mon, Sep 13, 2010 at 10:45 AM, Chanwoo Choi cw00.c...@samsung.com wrote:
This patch the I2C board information for the WM8994 used in the Goni/Aquila
as audio codec and adds the I2C/I2S platform drivers. Additionlly, to
control power consumption have registerd the voltage
This patch the I2C board information for the WM8994 used in the Goni/Aquila
as audio codec and adds the I2C platform drivers.
Signed-off-by : Chanwoo Choi cw00.c...@samsung.com
Signed-off-by : Joonyoung Shim jy0922.s...@samsung.com
Signed-off-by : Kyungmin Park kyungmin.p...@samsung.com
---
This patch add initializtion code of audio and I2S platform drivers
to Goni and Aquila board.
Signed-off-by : Chanwoo Choi cw00.c...@samsung.com
Signed-off-by : Joonyoung Shim jy0922.s...@samsung.com
Signed-off-by : Kyungmin Park kyungmin.p...@samsung.com
---
arch/arm/mach-s5pv210/mach-aquila.c
This patch add cose related to regulator. To control powre consumeption
have registered the voltage consumer of WM8994 to the regulator framework.
Additionally, I explain the constraints of the regulator of WM8994 codec.
All these consumer supply of WM8994 codec connected the regulator(VCC_1.8V)
Marek Szyprowski wrote:
From: Joonyoung Shim jy0922.s...@samsung.com
This patch adds a common callback for gpio_to_irq() for external and
gpio interrupts for Samsung SoCs.
Signed-off-by: Joonyoung Shim jy0922.s...@samsung.com
Signed-off-by: Kyungmin Park kyungmin.p...@samsung.com
On Fri, Oct 01, 2010 at 01:23:25PM +0900, Chanwoo Choi wrote:
Additionally, I explain the constraints of the regulator of WM8994 codec.
All these consumer supply of WM8994 codec connected the regulator(VCC_1.8V)
on a circuit diagram. VCC_1.8V regulator is always enabled, because it is
used to
15 matches
Mail list logo