On Tue, Nov 5, 2013 at 5:04 PM, Tushar Behera tushar.beh...@linaro.org wrote:
On 5 November 2013 13:27, Kyungmin Park kmp...@infradead.org wrote:
On Tue, Nov 5, 2013 at 3:29 PM, Tushar Behera tushar.beh...@linaro.org
wrote:
On 31 October 2013 21:46, Lee Jones lee.jo...@linaro.org wrote:
On
Hi Thierry,
On 30 October 2013 10:09, Sachin Kamat sachin.ka...@linaro.org wrote:
Updated supported SoC name for pwm-samsung.
Signed-off-by: Sachin Kamat sachin.ka...@linaro.org
---
.../devicetree/bindings/pwm/pwm-samsung.txt|2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
Hi,
On 01.11.2013 20:58, Tomasz Figa wrote:
Hi,
On Monday 14 of October 2013 19:08:23 Vyacheslav Tyrtov wrote:
From: Tarek Dakhran t.dakh...@samsung.com
The EXYNOS5410 clocks are statically listed and registered
using the Samsung specific common clock helper functions.
Signed-off-by: Tarek
On Tuesday 05 of November 2013 12:50:18 Vivek Gautam wrote:
Hi Kishon,
On Mon, Nov 4, 2013 at 6:42 PM, Kishon Vijay Abraham I kis...@ti.com
wrote:
Hi,
On Monday 04 November 2013 03:45 PM, Kamil Debski wrote:
Hi Kishon,
From: Kishon Vijay Abraham I [mailto:kis...@ti.com]
Sent:
Hi,
From: Vivek Gautam [mailto:gautamvivek1...@gmail.com]
Sent: Tuesday, November 05, 2013 8:20 AM
To: Kishon Vijay Abraham I
Cc: Kamil Debski; Vivek Gautam; Linux USB Mailing List; linux-samsung-
s...@vger.kernel.org; linux-ker...@vger.kernel.org;
devicet...@vger.kernel.org;
On 05/11/13 07:18, Sachin Kamat wrote:
Fix the name as per DT node naming convention.
- rename the node to syscon which is a more generic name.
- append the register value to the node name.
Signed-off-by: Sachin Kamat sachin.ka...@linaro.org
Reviewed-by: Tomasz Figa t.f...@samsung.com
1. The irq routine is so simple (just one register read) shouldn't be long
Hence, reduce the timeout to 100milli secs,
2. With 100ms of wait time, interruptible is very much unnecessary.
Hence, use wait_for_completion_timeout instead of
wait_for_completion_interruptible_timeout
3. Reset
On 05/11/13 07:18, Sachin Kamat wrote:
Added a binding example for reference and updated the
node name. While at it also removed the name description
as it is not necessary.
Signed-off-by: Sachin Kamat sachin.ka...@linaro.org
I'm not sure we need an example in each and every binding,
but
On Tuesday, November 05, 2013 6:37 PM, Kamil Debski wrote:
On Tuesday, November 05, 2013 8:20 AM, Vivek Gautam wrote:
On Mon, Nov 4, 2013 at 6:42 PM, Kishon Vijay Abraham I kis...@ti.com
wrote:
On Monday 04 November 2013 03:45 PM, Kamil Debski wrote:
On Monday, November 04, 2013 7:55
From: Shaik Ameer Basha shaik.am...@samsung.com
The patch adds the DT binding doc for exynos5 SoC camera
subsystem.
Signed-off-by: Shaik Ameer Basha shaik.am...@samsung.com
Signed-off-by: Arun Kumar K arun...@samsung.com
---
.../bindings/media/exynos5250-camera.txt | 126
From: Shaik Ameer Basha shaik.am...@samsung.com
This patch adds a top level media device driver for the Exynos5 SoC series
camera subsystem. The driver currently supports processing pipelines
involving following IP blocks:
* MIPI-CSIS
MIPI CSI-2 bus front-end to the FIMC-LITE, image sensors
Hi Arun,
Thanks for the patch. A few comments below.
On Tue, Nov 05, 2013 at 11:42:33AM +0530, Arun Kumar K wrote:
This driver is for the FIMC-IS IP available in Samsung Exynos5
SoC onwards. This patch adds the core files for the new driver.
Signed-off-by: Arun Kumar K arun...@samsung.com
Hi Sakari,
Thank you for the review.
Will make the required changes.
Thanks
Arun
On Tue, Nov 5, 2013 at 4:51 PM, Sakari Ailus sakari.ai...@iki.fi wrote:
Hi Arun,
Thanks for the patch. A few comments below.
On Tue, Nov 05, 2013 at 11:42:33AM +0530, Arun Kumar K wrote:
This driver is for
Added high speed I2C nodes to Exynos5420 DT file.
Signed-off-by: Sachin Kamat sachin.ka...@linaro.org
---
arch/arm/boot/dts/exynos5420.dtsi | 98 +
1 file changed, 98 insertions(+)
diff --git a/arch/arm/boot/dts/exynos5420.dtsi
On Tuesday, November 05, 2013 8:13 PM, Jingoo Han wrote:
On Tuesday, November 05, 2013 6:37 PM, Kamil Debski wrote:
On Tuesday, November 05, 2013 8:20 AM, Vivek Gautam wrote:
On Mon, Nov 4, 2013 at 6:42 PM, Kishon Vijay Abraham I kis...@ti.com
wrote:
On Monday 04 November 2013 03:45
fimc-is driver takes video data input from the ISP video node
which is added in this patch. This node accepts Bayer input
buffers which is given from the IS sensors.
Signed-off-by: Arun Kumar K arun...@samsung.com
Signed-off-by: Kilyeon Im kilyeon...@samsung.com
Reviewed-by: Sylwester Nawrocki
The patch adds the DT binding documentation for Samsung
Exynos5 SoC series imaging subsystem (FIMC-IS).
Signed-off-by: Arun Kumar K arun...@samsung.com
Reviewed-by: Sylwester Nawrocki s.nawro...@samsung.com
Acked-by: Mark Rutland mark.rutl...@arm.com
---
The patch series adds support for exynos5 fimc-is driver and a
new sensor s5k4e5. The media driver part is omitted form this series
as it is already applied.
Changes from v11
- Addressed review comments from Sakari Ailus
FIMC-IS has two hardware scalers named as scaler-codec and
scaler-preview. This patch adds the common code handling the
video nodes and subdevs of both the scalers.
Signed-off-by: Arun Kumar K arun...@samsung.com
Signed-off-by: Kilyeon Im kilyeon...@samsung.com
Reviewed-by: Sylwester Nawrocki
This patch adds the crucial hardware pipeline control for the
fimc-is driver. All the subdev nodes will call this pipeline
interfaces to reach the hardware. Responsibilities of this module
involves configuring and maintaining the hardware pipeline involving
multiple sub-ips like ISP, DRC, Scalers,
This patch adds the register definition file for the fimc-is driver
and also the header file containing the main context for the driver.
Signed-off-by: Arun Kumar K arun...@samsung.com
Signed-off-by: Kilyeon Im kilyeon...@samsung.com
Reviewed-by: Sylwester Nawrocki s.nawro...@samsung.com
---
Some sensors to be used with fimc-is are exclusively controlled
by the fimc-is firmware. This minimal sensor driver provides
the required info for the firmware to configure the sensors
sitting on I2C bus.
Signed-off-by: Arun Kumar K arun...@samsung.com
Reviewed-by: Sylwester Nawrocki
The hardware interface module finally sends the commands to the
FIMC-IS firmware and runs the interrupt handler for getting the
responses.
Signed-off-by: Arun Kumar K arun...@samsung.com
Signed-off-by: Kilyeon Im kilyeon...@samsung.com
Reviewed-by: Sylwester Nawrocki s.nawro...@samsung.com
---
Adds Kconfig and Makefile for exynos5-is driver files.
Signed-off-by: Shaik Ameer Basha shaik.am...@samsung.com
Signed-off-by: Arun Kumar K arun...@samsung.com
Reviewed-by: Sylwester Nawrocki s.nawro...@samsung.com
---
drivers/media/platform/Kconfig |1 +
S5K4E5 is a Samsung raw image sensor controlled via I2C.
This patch adds the DT binding documentation for the same.
Signed-off-by: Arun Kumar K arun...@samsung.com
Reviewed-by: Sylwester Nawrocki s.nawro...@samsung.com
Acked-by: Mark Rutland mark.rutl...@arm.com
---
This patch adds subdev driver for Samsung S5K4E5 raw image sensor.
Like s5k6a3, it is also another fimc-is firmware controlled
sensor. This minimal sensor driver doesn't do any I2C communications
as its done by ISP firmware. It can be updated if needed to a
regular sensor driver by adding the I2C
Hi Arun,
On Tue, Nov 05, 2013 at 11:42:34AM +0530, Arun Kumar K wrote:
This patch adds all the common header files used by the fimc-is
driver. It includes the commands for interfacing with the firmware
and error codes from IS firmware, metadata and command parameter
definitions.
Hi Sakari,
Thank you for the review.
On Tue, Nov 5, 2013 at 6:21 PM, Sakari Ailus sakari.ai...@iki.fi wrote:
Hi Arun,
On Tue, Nov 05, 2013 at 11:42:34AM +0530, Arun Kumar K wrote:
This patch adds all the common header files used by the fimc-is
driver. It includes the commands for
Hi,
This is the third version of the patchset adding the new Exynos USB 2.0 PHY
driver, which uses the Generic PHY Framework.
It contains numerous fixes and cleanups, which are the results of the feedback
to the second version.
Best wishes,
Kamil Debski
Changes from v2:
-
Add a new driver for the Exynos USB PHY. The new driver uses the generic
PHY framework. The driver includes support for the Exynos 4x10 and 4x12
SoC families.
Signed-off-by: Kamil Debski k.deb...@samsung.com
Signed-off-by: Kyungmin Park kyungmin.p...@samsung.com
---
Change the phy provider used from the old usb phy specific to a new one
using the generic phy framework.
Signed-off-by: Kamil Debski k.deb...@samsung.com
Signed-off-by: Kyungmin Park kyungmin.p...@samsung.com
---
drivers/usb/host/ehci-exynos.c | 34 +++---
1 file
Change the used phy driver to the new Exynos USB phy driver that uses the
generic phy framework.
Signed-off-by: Kamil Debski k.deb...@samsung.com
Signed-off-by: Kyungmin Park kyungmin.p...@samsung.com
---
drivers/usb/gadget/s3c-hsotg.c | 12 +++-
1 file changed, 7 insertions(+), 5
Hi Kamil,
On Tue, Nov 5, 2013 at 3:06 PM, Kamil Debski k.deb...@samsung.com wrote:
Hi,
From: Vivek Gautam [mailto:gautamvivek1...@gmail.com]
Sent: Tuesday, November 05, 2013 8:20 AM
To: Kishon Vijay Abraham I
Cc: Kamil Debski; Vivek Gautam; Linux USB Mailing List; linux-samsung-
On Tue, Nov 5, 2013 at 5:33 PM, Jingoo Han jg1@samsung.com wrote:
On Tuesday, November 05, 2013 8:13 PM, Jingoo Han wrote:
On Tuesday, November 05, 2013 6:37 PM, Kamil Debski wrote:
On Tuesday, November 05, 2013 8:20 AM, Vivek Gautam wrote:
On Mon, Nov 4, 2013 at 6:42 PM, Kishon Vijay
On Wednesday, November 06, 2013 2:58 AM, Vivek Gautam wrote:
On Tue, Nov 5, 2013 at 5:33 PM, Jingoo Han jg1@samsung.com wrote:
[.]
USB3.0 PHY consists of two blocks such as 3.0 block and 2.0 block.
This USB3.0 PHY can support UTMI+ and PIPE3 interface for 3.0 block
and 2.0 block,
On Wednesday, November 06, 2013 1:13 AM, Kamil Debski wrote:
Add a new driver for the Exynos USB PHY. The new driver uses the generic
PHY framework. The driver includes support for the Exynos 4x10 and 4x12
SoC families.
Signed-off-by: Kamil Debski k.deb...@samsung.com
Signed-off-by:
On Wednesday, November 06, 2013 1:13 AM, Kamil Debski wrote:
Change the phy provider used from the old usb phy specific to a new one
using the generic phy framework.
Signed-off-by: Kamil Debski k.deb...@samsung.com
Signed-off-by: Kyungmin Park kyungmin.p...@samsung.com
---
Change the phy provider used from the old usb phy specific to a new one
using the generic phy framework.
Signed-off-by: Jingoo Han jg1@samsung.com
Cc: Kamil Debski k.deb...@samsung.com
---
Exynos OHCI driver also uses Exynos USB2.0 PHY. Thus, I make this
patch based-on Kamil Debski's patchset
Hi Tomasz,
On Thu, Oct 31, 2013 at 6:07 PM, Tomasz Figa t.f...@samsung.com wrote:
Hi Rajeshwari,
On Thursday 31 of October 2013 16:17:15 Rajeshwari Birje wrote:
Hi Mark Brown ,
On Wed, Oct 30, 2013 at 10:36 PM, Tomasz Figa t.f...@samsung.com wrote:
On Wednesday 30 of October 2013 10:00:29
39 matches
Mail list logo
