Hi Thomas,
From: Thomas Abraham thomas...@samsung.com
Commit 6f19efc0 (cpufreq: Add boost frequency support in core) adds
support for CPU boost mode. This patch adds support for finding
available boost frequencies from device tree and marking them as
usable in boost mode.
Cc: Nishanth
On Thu, May 29, 2014 at 09:52:22AM -0600, Stephen Warren wrote:
On 05/23/2014 02:36 PM, Thierry Reding wrote:
From: Thierry Reding tred...@nvidia.com
This commit introduces a generic device tree binding for IOMMU devices.
Only a very minimal subset is described here, but it is enough to
Hi Thomas,
From: Thomas Abraham thomas...@samsung.com
Add a new optional boost-frequency binding for specifying the
frequencies usable in boost mode.
Cc: Nishanth Menon n...@ti.com
Cc: Lukasz Majewski l.majew...@samsung.com
Cc: Rob Herring robh...@kernel.org
Cc: Pawel Moll
On 28 May 2014 07:35, Jaehoon Chung jh80.ch...@samsung.com wrote:
Removed the parser for supports-highspeed.
It can be parsed with cap-mmc-highsped or cap-sd-highspeed at
mmc_of_parse().
Signed-off-by: Jaehoon Chung jh80.ch...@samsung.com
---
drivers/mmc/host/dw_mmc.c |3 ---
1 file
Hi, Ulf.
On 05/30/2014 05:01 PM, Ulf Hansson wrote:
On 28 May 2014 07:35, Jaehoon Chung jh80.ch...@samsung.com wrote:
Removed the parser for supports-highspeed.
It can be parsed with cap-mmc-highsped or cap-sd-highspeed at
mmc_of_parse().
Signed-off-by: Jaehoon Chung jh80.ch...@samsung.com
The exynos_hdmi.h has been used for the dedicated i2c drivers
that were already removed. Thus, the unnecessary exynos_hdmi.h
should be removed.
Signed-off-by: Jingoo Han jg1@samsung.com
---
drivers/gpu/drm/exynos/exynos_hdmi.h | 23 ---
1 file changed, 23
The exynos_hdmi.h has been used for the dedicated i2c drivers
that were already removed. Thus, the unnecessary exynos_hdmi.h
should be removed.
Signed-off-by: Jingoo Han jg1@samsung.com
---
drivers/gpu/drm/exynos/exynos_hdmi.h | 23 ---
1 file changed,
From: Thomas Abraham thomas...@samsung.com
Add a new optional boost-frequency binding for specifying the frequencies
usable in boost mode.
Cc: Rob Herring robh...@kernel.org
Cc: Pawel Moll pawel.m...@arm.com
Cc: Mark Rutland mark.rutl...@arm.com
Cc: Ian Campbell ijc+devicet...@hellion.org.uk
Cc:
Changes since v5:
- Fixes for checkpatch warnings with --strict option as suggested by
Nishanth Menon.
Changes since v4:
- Code improvements suggested by Viresh Kumar.
Changes since v3:
- Minor changes as suggested in the last version.
Changes since v2:
- Reworked based on the PM / OPP: move
Hi all,
I am trying an upstream kernel + some patches to enable ethernet on
arndale octa.
Unfortunately, only 4 cores boot up. The other ones fail to boot.
[12.179453] CPU6: failed to come online
[13.189479] CPU7: failed to come online
[14.199479] CPU4: failed to come online
[15.209743]
On 04/24/2014 07:42 PM, Tomasz Figa wrote:
Hi Daniel,
Please see my comments inline.
Btw. Please fix your e-mail composer to properly wrap your messages
around 7xth column, as otherwise they're hard to read.
On 04.04.2014 11:48, Daniel Lezcano wrote:
The following driver is for exynos4210. I
On Fri, May 23, 2014 at 10:36:35PM +0200, Thierry Reding wrote:
From: Thierry Reding tred...@nvidia.com
This commit introduces a generic device tree binding for IOMMU devices.
Only a very minimal subset is described here, but it is enough to cover
the requirements of both the Exynos System
On Fri, May 30, 2014 at 08:30:08AM +0100, Thierry Reding wrote:
On Thu, May 29, 2014 at 09:52:22AM -0600, Stephen Warren wrote:
On 05/23/2014 02:36 PM, Thierry Reding wrote:
From: Thierry Reding tred...@nvidia.com
This commit introduces a generic device tree binding for IOMMU devices.
On czw, 2014-05-15 at 13:18 +0200, Krzysztof Kozlowski wrote:
Without software reset the secondary CPU does not power up and
exynos_boot_secondary() ends with pen_release equal to 1. This can be
observed in dmesg:
CPU1: failed to come online
Brought up 1 CPUs
SMP: Total of
On wto, 2014-05-13 at 16:12 +0200, Krzysztof Kozlowski wrote:
On Exynos4212 USE_DELAYED_RESET_ASSERTION must be set in
ARM_CORE1_OPTION register during CPU power down. This is the proper way
of powering down CPU. Additionally without this the CPU clock down won't
work after powering down CPU1
Hi Daniel,
On 30.05.2014 11:30, Daniel Lezcano wrote:
On 04/24/2014 07:42 PM, Tomasz Figa wrote:
Hi Daniel,
Please see my comments inline.
Btw. Please fix your e-mail composer to properly wrap your messages
around 7xth column, as otherwise they're hard to read.
On 04.04.2014 11:48,
Hi,
On 23.05.2014 17:20, Tomasz Figa wrote:
When CPU topology is specified in device tree, cpu_logical_map() does
not return core ID anymore, but rather full MPIDR value. This breaks
existing calculation of PMU register offsets on Exynos SoCs.
This patch fixes the problem by adjusting the
Hi,
On 23.05.2014 16:39, Tomasz Figa wrote:
This patch fixes reg entry sizes in GIC node that were not large enough
to cover whole regions.
Signed-off-by: Tomasz Figa t.f...@samsung.com
---
arch/arm/boot/dts/exynos4.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git
Hi Krzysztof,
On 15.05.2014 13:18, Krzysztof Kozlowski wrote:
Without software reset the secondary CPU does not power up and
exynos_boot_secondary() ends with pen_release equal to 1. This can be
observed in dmesg:
CPU1: failed to come online
Brought up 1 CPUs
SMP: Total of
Ping,
Could you review this patch?
Thanks,
Chanwoo Choi
On 05/26/2014 03:29 PM, Chanwoo Choi wrote:
This patch add pmusysreg node for Exynos3250 to access PMU (Power Management
Unit)
register in a centralized way using syscon driver.
Signed-off-by: Chanwoo Choi cw00.c...@samsung.com
Hi Krzysztof,
On 13.05.2014 16:12, Krzysztof Kozlowski wrote:
On Exynos4212 USE_DELAYED_RESET_ASSERTION must be set in
ARM_CORE1_OPTION register during CPU power down. This is the proper way
of powering down CPU. Additionally without this the CPU clock down won't
work after powering down CPU1
On 26.05.2014 08:29, Chanwoo Choi wrote:
This patch add pmusysreg node for Exynos3250 to access PMU (Power Management
Unit)
register in a centralized way using syscon driver.
Signed-off-by: Chanwoo Choi cw00.c...@samsung.com
Acked-by: Kyungmin Park kyungmin.p...@samsung.com
---
On 05/30/2014 08:52 PM, Tomasz Figa wrote:
On 26.05.2014 08:29, Chanwoo Choi wrote:
This patch add pmusysreg node for Exynos3250 to access PMU (Power Management
Unit)
register in a centralized way using syscon driver.
Signed-off-by: Chanwoo Choi cw00.c...@samsung.com
Acked-by: Kyungmin
Hi Vikas, Pankaj,
On 27.05.2014 13:26, Vikas Sajjan wrote:
Hi,
Any comments on this series?
I still have this series on my to-review list, but it's quite complex
and I didn't have needed amount of time yet, sorry. At the moment I'm on
vacation, so I don't want to spend too much time on the
On Friday, May 30, 2014 02:31:15 PM Thomas Abraham wrote:
Changes since v5:
- Fixes for checkpatch warnings with --strict option as suggested by
Nishanth Menon.
Changes since v4:
- Code improvements suggested by Viresh Kumar.
Changes since v3:
- Minor changes as suggested in the last
On pią, 2014-05-30 at 13:50 +0200, Tomasz Figa wrote:
Hi Krzysztof,
On 13.05.2014 16:12, Krzysztof Kozlowski wrote:
On Exynos4212 USE_DELAYED_RESET_ASSERTION must be set in
ARM_CORE1_OPTION register during CPU power down. This is the proper way
of powering down CPU. Additionally without
On Fri, May 30, 2014, Jaehoon Chung wrote:
Hi, Ulf.
On 05/30/2014 05:01 PM, Ulf Hansson wrote:
On 28 May 2014 07:35, Jaehoon Chung jh80.ch...@samsung.com wrote:
Removed the parser for supports-highspeed.
It can be parsed with cap-mmc-highsped or cap-sd-highspeed at
mmc_of_parse().
On Wed, May 28, 2014, Jaehoon Chung wrote:
dw-mmc controller has the multiple slot.
Then it needs to parse the property for each slot.
Signed-off-by: Jaehoon Chung jh80.ch...@samsung.com
Acked-by: Seungwon Jeon tgih@samsung.com
Thanks,
Seungwon Jeon
---
Changelog V3:
- Fix
On Wed, May 28, 2014, Jaehoon Chung wrote:
Removed the parser for supports-highspeed.
It can be parsed with cap-mmc-highsped or cap-sd-highspeed at
mmc_of_parse().
Signed-off-by: Jaehoon Chung jh80.ch...@samsung.com
Acked-by: Seungwon Jeon tgih@samsung.com
Tahnks,
Seungwon Jeon
---
+ Dinh Nguyen dingu...@altera.com
+ Heiko Stuebner he...@sntech.de
On Wed, May 28, 2014, Jaehoon Chung wrote:
dw-mmc controller can support the multiple slot.
So each slot's property can be difference.
And support-highspeed property in dw-mmc is deprecated.
support-highspeed property can be
On 30.05.2014 14:46, Krzysztof Kozlowski wrote:
On pią, 2014-05-30 at 13:50 +0200, Tomasz Figa wrote:
Hi Krzysztof,
On 13.05.2014 16:12, Krzysztof Kozlowski wrote:
On Exynos4212 USE_DELAYED_RESET_ASSERTION must be set in
ARM_CORE1_OPTION register during CPU power down. This is the proper way
Hi,
Apologies for being somewhat late w.r.t. review on this.
On Fri, May 30, 2014 at 10:01:17AM +0100, Thomas Abraham wrote:
From: Thomas Abraham thomas...@samsung.com
Add a new optional boost-frequency binding for specifying the frequencies
usable in boost mode.
Cc: Rob Herring
On Fri, May 23, 2014 at 3:33 PM, Thierry Reding
thierry.red...@gmail.com wrote:
From: Thierry Reding tred...@nvidia.com
This commit introduces a generic device tree binding for IOMMU devices.
Only a very minimal subset is described here, but it is enough to cover
the requirements of both the
Hi,
Am 30.05.2014 11:25, schrieb Daniel Lezcano:
I am trying an upstream kernel + some patches to enable ethernet on
arndale octa.
Unfortunately, only 4 cores boot up. The other ones fail to boot.
[12.179453] CPU6: failed to come online
[13.189479] CPU7: failed to come online
Hi,
On Friday, May 30, 2014 01:34:45 PM Tomasz Figa wrote:
Hi Daniel,
On 30.05.2014 11:30, Daniel Lezcano wrote:
On 04/24/2014 07:42 PM, Tomasz Figa wrote:
Hi Daniel,
Please see my comments inline.
Btw. Please fix your e-mail composer to properly wrap your messages
around 7xth
Hello Doug,
On 05/29/2014 11:21 PM, Doug Anderson wrote:
Right now if you've got earlyprintk enabled on exynos5420-peach-pit
then you'll get a hang on boot. Here's why:
1. The i2c-s3c2410 driver will probe at subsys_initcall. It will
enable its clock and disable it. This is the clock
On Friday, May 30, 2014 02:19:06 PM Rafael J. Wysocki wrote:
On Friday, May 30, 2014 02:31:15 PM Thomas Abraham wrote:
Changes since v5:
- Fixes for checkpatch warnings with --strict option as suggested by
Nishanth Menon.
Changes since v4:
- Code improvements suggested by Viresh
On pią, 2014-05-30 at 14:56 +0200, Tomasz Figa wrote:
On 30.05.2014 14:46, Krzysztof Kozlowski wrote:
On pią, 2014-05-30 at 13:50 +0200, Tomasz Figa wrote:
Hi Krzysztof,
On 13.05.2014 16:12, Krzysztof Kozlowski wrote:
On Exynos4212 USE_DELAYED_RESET_ASSERTION must be set in
On 05/30/2014 03:33 PM, Andreas Färber wrote:
Hi,
Am 30.05.2014 11:25, schrieb Daniel Lezcano:
I am trying an upstream kernel + some patches to enable ethernet on
arndale octa.
Unfortunately, only 4 cores boot up. The other ones fail to boot.
[12.179453] CPU6: failed to come online
Am 30.05.2014 16:56, schrieb Daniel Lezcano:
On 05/30/2014 03:33 PM, Andreas Färber wrote:
Am 30.05.2014 11:25, schrieb Daniel Lezcano:
I am trying an upstream kernel + some patches to enable ethernet on
arndale octa.
Unfortunately, only 4 cores boot up. The other ones fail to boot.
Tomasz,
On Thu, May 29, 2014 at 10:02 PM, Tomasz Figa tomasz.f...@gmail.com wrote:
Hi,
On 30.05.2014 00:29, Mike Turquette wrote:
Quoting Doug Anderson (2014-05-29 14:21:36)
Right now if you've got earlyprintk enabled on exynos5420-peach-pit
then you'll get a hang on boot. Here's why:
1.
Javier,
On Fri, May 30, 2014 at 7:00 AM, Javier Martinez Canillas
javier.marti...@collabora.co.uk wrote:
@@ -1239,3 +1251,15 @@ static void __init exynos5800_clk_init(struct
device_node *np)
exynos5x_clk_init(np, EXYNOS5800);
}
CLK_OF_DECLARE(exynos5800_clk,
Right now if you've got earlyprintk enabled on exynos5420-peach-pit
then you'll get a hang on boot. Here's why:
1. The i2c-s3c2410 driver will probe at subsys_initcall. It will
enable its clock and disable it. This is the clock i2c2.
2. The act of disabling i2c2 will disable its parents.
On Mon, May 12, 2014 at 10:59:43AM +0200, Lucas Stach wrote:
Hi Bjorn,
just a friendly reminder. It would be nice if you could pull those in.
Shawn already pulled the DT change and as it is a binding change this
means PCIe on i.MX6 is broken in -next, as long as the remaining patches
are
Hi Mark,
On Fri, May 30, 2014 at 6:38 PM, Mark Rutland mark.rutl...@arm.com wrote:
Hi,
Apologies for being somewhat late w.r.t. review on this.
On Fri, May 30, 2014 at 10:01:17AM +0100, Thomas Abraham wrote:
From: Thomas Abraham thomas...@samsung.com
Add a new optional boost-frequency
On Fri, May 30, 2014 at 8:17 PM, Rafael J. Wysocki r...@rjwysocki.net wrote:
On Friday, May 30, 2014 02:19:06 PM Rafael J. Wysocki wrote:
On Friday, May 30, 2014 02:31:15 PM Thomas Abraham wrote:
Changes since v5:
- Fixes for checkpatch warnings with --strict option as suggested by
On 05/30/14 20:52, Tomasz Figa wrote:
On 26.05.2014 08:29, Chanwoo Choi wrote:
This patch add pmusysreg node for Exynos3250 to access PMU (Power Management
Unit)
register in a centralized way using syscon driver.
Signed-off-by: Chanwoo Choicw00.c...@samsung.com
Acked-by: Kyungmin
Am Freitag, 30. Mai 2014, 21:54:13 schrieb Seungwon Jeon:
+ Dinh Nguyen dingu...@altera.com
+ Heiko Stuebner he...@sntech.de
On Wed, May 28, 2014, Jaehoon Chung wrote:
dw-mmc controller can support the multiple slot.
So each slot's property can be difference.
And support-highspeed
On 05/30/14 20:41, Tomasz Figa wrote:
Hi,
On 23.05.2014 16:39, Tomasz Figa wrote:
This patch fixes reg entry sizes in GIC node that were not large enough
to cover whole regions.
Signed-off-by: Tomasz Figat.f...@samsung.com
---
arch/arm/boot/dts/exynos4.dtsi | 2 +-
1 file changed, 1
On 05/30/14 14:01, Arun Kumar K wrote:
The vbus-supply property is wrongly updated in the
usbdrd node instead of the usbdrd_phy node. This patch
fixes the same.
Signed-off-by: Arun Kumar Karun...@samsung.com
---
OK, applied this and 2nd one.
Thanks,
Kukjin
--
To unsubscribe from this list:
Am 28.05.2014 06:13, schrieb Sachin Kamat:
Almost all Exynos-series of SoCs that run in secure mode don't need
additional offset for every CPU, with Exynos4412 being the only
exception.
Tested on Origen-Quad (Exynos4412) and Arndale-Octa (Exynos5420).
While at it, fix the coding style
On 05/28/14 13:13, Sachin Kamat wrote:
From: Tushar Beheratushar.beh...@linaro.org
Arndale-Octa board is always configured to work with trustzone
firmware binary. Added DTS node entry to enable this support.
Signed-off-by: Tushar Beheratushar.beh...@linaro.org
Signed-off-by: Sachin
On 05/26/14 14:54, Abhilash Kesavan wrote:
5800 is very similar to 5420. We can re-use the existing
MCPM support for 5800 for secondary boot-up and switching.
Signed-off-by: Abhilash Kesavana.kesa...@samsung.com
---
arch/arm/mach-exynos/mcpm-exynos.c |8 +++-
1 file changed, 7
On Fri, May 30, 2014 at 11:45 PM, Tomasz Figa tomasz.f...@gmail.com wrote:
On 30.05.2014 20:05, Thomas Abraham wrote:
Hi Mark,
On Fri, May 30, 2014 at 6:38 PM, Mark Rutland mark.rutl...@arm.com wrote:
Hi,
Apologies for being somewhat late w.r.t. review on this.
On Fri, May 30, 2014 at
On 30.05.2014 20:33, Thomas Abraham wrote:
On Fri, May 30, 2014 at 11:45 PM, Tomasz Figa tomasz.f...@gmail.com wrote:
On 30.05.2014 20:05, Thomas Abraham wrote:
Hi Mark,
On Fri, May 30, 2014 at 6:38 PM, Mark Rutland mark.rutl...@arm.com wrote:
Hi,
Apologies for being somewhat late w.r.t.
On 30/05/14 19:15, Tomasz Figa wrote:
On 30.05.2014 20:05, Thomas Abraham wrote:
Hi Mark,
On Fri, May 30, 2014 at 6:38 PM, Mark Rutland mark.rutl...@arm.com wrote:
Hi,
Apologies for being somewhat late w.r.t. review on this.
On Fri, May 30, 2014 at 10:01:17AM +0100, Thomas Abraham
On 30.05.2014 20:38, Sudeep Holla wrote:
On 30/05/14 19:15, Tomasz Figa wrote:
On 30.05.2014 20:05, Thomas Abraham wrote:
On Fri, May 30, 2014 at 6:38 PM, Mark Rutland mark.rutl...@arm.com
wrote:
[snip]
Why are these in both operating-points and boost-frequencies? It'll be
really easy to
On 05/31/14 03:19, Andreas Färber wrote:
Am 28.05.2014 06:13, schrieb Sachin Kamat:
Almost all Exynos-series of SoCs that run in secure mode don't need
additional offset for every CPU, with Exynos4412 being the only
exception.
Tested on Origen-Quad (Exynos4412) and Arndale-Octa (Exynos5420).
From: Stephen Warren swar...@nvidia.com
This is the same change as commit fb6b8e71448a ASoC: tegra: free jack
GPIOs before the sound card is freed, but applied to all other ASoC
machine drivers where code inspection indicates the same problem exists.
That commit's description is:
==
On 30.05.2014 20:42, Kukjin Kim wrote:
On 05/31/14 03:19, Andreas Färber wrote:
Am 28.05.2014 06:13, schrieb Sachin Kamat:
Almost all Exynos-series of SoCs that run in secure mode don't need
additional offset for every CPU, with Exynos4412 being the only
exception.
Tested on Origen-Quad
On 30/05/14 19:41, Tomasz Figa wrote:
On 30.05.2014 20:38, Sudeep Holla wrote:
On 30/05/14 19:15, Tomasz Figa wrote:
On 30.05.2014 20:05, Thomas Abraham wrote:
On Fri, May 30, 2014 at 6:38 PM, Mark Rutland mark.rutl...@arm.com
wrote:
[snip]
Why are these in both operating-points and
On 05/28/14 20:08, Marek Szyprowski wrote:
Hello,
On 2014-05-28 12:41, Kukjin Kim wrote:
I'm wondering who need to support following SoCs/boards in mainline.
* S5P64X0/SMDK6440 and SMDK6450
* S5PC100/SMDKC100
If nobody is using them, how about to remove them from mainline?
I'm okay with
On 05/28/14 20:09, Tomasz Figa wrote:
On 28.05.2014 13:04, Arnd Bergmann wrote:
On Wednesday 28 May 2014 19:41:41 Kukjin Kim wrote:
Hi all,
I'm wondering who need to support following SoCs/boards in mainline.
* S5P64X0/SMDK6440 and SMDK6450
* S5PC100/SMDKC100
If nobody is using them, how
On Fri, May 30, 2014 at 07:05:43PM +0100, Thomas Abraham wrote:
Hi Mark,
On Fri, May 30, 2014 at 6:38 PM, Mark Rutland mark.rutl...@arm.com wrote:
Hi,
Apologies for being somewhat late w.r.t. review on this.
On Fri, May 30, 2014 at 10:01:17AM +0100, Thomas Abraham wrote:
From:
On Friday 30 May 2014 12:22:32 Dave Martin wrote:
+
+Examples:
+=
+
+Single-master IOMMU:
+
+
+ iommu {
+ #address-cells = 0;
+ #size-cells = 0;
+ };
+
+ master {
+ iommus = /iommu;
+ };
+
On Friday 30 May 2014 08:16:05 Rob Herring wrote:
On Fri, May 23, 2014 at 3:33 PM, Thierry Reding
thierry.red...@gmail.com wrote:
From: Thierry Reding tred...@nvidia.com
+IOMMU master node:
+==
+
+Devices that access memory through an IOMMU are called masters. A device
Hi,
On Fri, May 30, 2014 at 7:41 AM, Tushar Behera trbli...@gmail.com wrote:
On Thu, May 29, 2014 at 11:30 PM, Andreas Färber afaer...@suse.de wrote:
Hi Tarek,
And I reproducibly get failures for CPUs 1-3, resulting in only one CPU
in /proc/cpuinfo (compared to 4 on downstream 3.14):
[
On Friday 30 May 2014 12:27:28 Dave Martin wrote:
On Fri, May 30, 2014 at 08:30:08AM +0100, Thierry Reding wrote:
On Thu, May 29, 2014 at 09:52:22AM -0600, Stephen Warren wrote:
On 05/23/2014 02:36 PM, Thierry Reding wrote:
I think this is a mistake. address-cells/size-cells are for
Hi all,
On Fri, May 30, 2014 at 10:16 PM, Sachin Kamat sachin.ka...@linaro.org wrote:
On Friday, 30 May 2014, Tushar Behera trbli...@gmail.com wrote:
On Thu, May 29, 2014 at 11:30 PM, Andreas Färber afaer...@suse.de wrote:
Hi Tarek,
And I reproducibly get failures for CPUs 1-3,
On 30.05.2014 20:50, Kukjin Kim wrote:
On 05/28/14 20:09, Tomasz Figa wrote:
On 28.05.2014 13:04, Arnd Bergmann wrote:
On Wednesday 28 May 2014 19:41:41 Kukjin Kim wrote:
Hi all,
I'm wondering who need to support following SoCs/boards in mainline.
* S5P64X0/SMDK6440 and SMDK6450
*
Arnd Bergmann a...@arndb.de writes:
+Multiple-master IOMMU:
+--
+
+ iommu {
+ /* the specifier represents the ID of the master */
+ #address-cells = 1;
+ #size-cells = 0;
+ };
+
+ master {
+
On Fri, May 30, 2014 at 2:06 PM, Arnd Bergmann a...@arndb.de wrote:
On Friday 30 May 2014 08:16:05 Rob Herring wrote:
On Fri, May 23, 2014 at 3:33 PM, Thierry Reding
thierry.red...@gmail.com wrote:
From: Thierry Reding tred...@nvidia.com
+IOMMU master node:
+==
+
On Friday 30 May 2014 14:31:55 Rob Herring wrote:
On Fri, May 30, 2014 at 2:06 PM, Arnd Bergmann a...@arndb.de wrote:
On Friday 30 May 2014 08:16:05 Rob Herring wrote:
On Fri, May 23, 2014 at 3:33 PM, Thierry Reding
thierry.red...@gmail.com wrote:
From: Thierry Reding tred...@nvidia.com
On 05/30/2014 01:55 PM, Mark Rutland wrote:
On Fri, May 30, 2014 at 07:05:43PM +0100, Thomas Abraham wrote:
Hi Mark,
On Fri, May 30, 2014 at 6:38 PM, Mark Rutland mark.rutl...@arm.com wrote:
Hi,
Apologies for being somewhat late w.r.t. review on this.
On Fri, May 30, 2014 at 10:01:17AM
On Friday 30 May 2014 22:29:13 Hiroshi Doyu wrote:
IIUC the original problem, a master with 8 streamIDs means something
like below, where some devices have multiple IDs but some have a
single. A sinle #address-cells cannot afford those 2 masters at once.
iommu {
/*
The following changes since commit bfed1074f213051e94648bfad0d0611a16d81366:
clk: exynos5250: Add missing sysmmu clocks for DISP and ISP blocks
(2014-05-26 06:48:10 +0900)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung.git
The following changes since commit 3c8977f17796f0b8816a1a283b0b80b71c83d416:
ARM: dts: enable usb nodes for exynos4412-trats2 (2014-05-23 03:31:33
+0900)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung.git
tags/samsung-dt-3
for
The following changes since commit fced6dee29f6fb143fe16ea90331176ff77e6120:
Merge branch 'v3.16-next/cleanup-samsung' into
v3.16-next/platform-exynos (2014-05-31 02:36:49 +0900)
are available in the git repository at:
The following changes since commit ccf5511797cd4b48d20a85fa1778f5608eac9fd7:
ARM: EXYNOS: Add MCPM call-back functions (2014-05-16 04:26:30 +0900)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung.git
tags/exynos-mcpm-2
for you to
On 30.05.2014 21:50, Nishanth Menon wrote:
On 05/30/2014 01:55 PM, Mark Rutland wrote:
On Fri, May 30, 2014 at 07:05:43PM +0100, Thomas Abraham wrote:
Hi Mark,
On Fri, May 30, 2014 at 6:38 PM, Mark Rutland mark.rutl...@arm.com wrote:
Hi,
Apologies for being somewhat late w.r.t. review on
On 05/30/2014 03:02 PM, Tomasz Figa wrote:
On 30.05.2014 21:50, Nishanth Menon wrote:
On 05/30/2014 01:55 PM, Mark Rutland wrote:
On Fri, May 30, 2014 at 07:05:43PM +0100, Thomas Abraham wrote:
Hi Mark,
On Fri, May 30, 2014 at 6:38 PM, Mark Rutland mark.rutl...@arm.com wrote:
Hi,
On 05/30/2014 03:19 PM, Tomasz Figa wrote:
On 30.05.2014 22:13, Nishanth Menon wrote:
On 05/30/2014 03:02 PM, Tomasz Figa wrote:
On 30.05.2014 21:50, Nishanth Menon wrote:
On 05/30/2014 01:55 PM, Mark Rutland wrote:
On Fri, May 30, 2014 at 07:05:43PM +0100, Thomas Abraham wrote:
Hi Mark,
On Fri, May 30, 2014 at 3:33 PM, Nishanth Menon n...@ti.com wrote:
On 05/30/2014 03:19 PM, Tomasz Figa wrote:
On 30.05.2014 22:13, Nishanth Menon wrote:
On 05/30/2014 03:02 PM, Tomasz Figa wrote:
On 30.05.2014 21:50, Nishanth Menon wrote:
On 05/30/2014 01:55 PM, Mark Rutland wrote:
On Fri,
On Friday, May 30, 2014 11:37:58 PM Thomas Abraham wrote:
On Fri, May 30, 2014 at 8:17 PM, Rafael J. Wysocki r...@rjwysocki.net wrote:
On Friday, May 30, 2014 02:19:06 PM Rafael J. Wysocki wrote:
On Friday, May 30, 2014 02:31:15 PM Thomas Abraham wrote:
Changes since v5:
- Fixes for
On 05/30/2014 03:45 PM, Rob Herring wrote:
On Fri, May 30, 2014 at 3:33 PM, Nishanth Menon n...@ti.com wrote:
On 05/30/2014 03:19 PM, Tomasz Figa wrote:
On 30.05.2014 22:13, Nishanth Menon wrote:
On 05/30/2014 03:02 PM, Tomasz Figa wrote:
On 30.05.2014 21:50, Nishanth Menon wrote:
On
On 05/30/2014 03:43 PM, Tomasz Figa wrote:
[...]
OK, so you add overclocked frequencies to operating-points property,
boost-frequency property, build a dtb, use it with a kernel that doesn't
support boost-frequency and nicely overheat (and likely destroy) your
board. I don't think this makes
On Sat, May 31, 2014 at 04:59:39AM +0900, Kukjin Kim wrote:
The following changes since commit fced6dee29f6fb143fe16ea90331176ff77e6120:
Merge branch 'v3.16-next/cleanup-samsung' into
v3.16-next/platform-exynos (2014-05-31 02:36:49 +0900)
are available in the git repository at:
On Sat, May 31, 2014 at 04:59:24AM +0900, Kukjin Kim wrote:
The following changes since commit 3c8977f17796f0b8816a1a283b0b80b71c83d416:
ARM: dts: enable usb nodes for exynos4412-trats2 (2014-05-23
03:31:33 +0900)
are available in the git repository at:
On Sat, May 31, 2014 at 04:58:57AM +0900, Kukjin Kim wrote:
The following changes since commit bfed1074f213051e94648bfad0d0611a16d81366:
clk: exynos5250: Add missing sysmmu clocks for DISP and ISP blocks
(2014-05-26 06:48:10 +0900)
are available in the git repository at:
On Sat, May 31, 2014 at 05:00:01AM +0900, Kukjin Kim wrote:
The following changes since commit ccf5511797cd4b48d20a85fa1778f5608eac9fd7:
ARM: EXYNOS: Add MCPM call-back functions (2014-05-16 04:26:30 +0900)
are available in the git repository at:
On Sat, May 31, 2014 at 04:59:39AM +0900, Kukjin Kim wrote:
The following changes since commit fced6dee29f6fb143fe16ea90331176ff77e6120:
Merge branch 'v3.16-next/cleanup-samsung' into
v3.16-next/platform-exynos (2014-05-31 02:36:49 +0900)
are available in the git repository at:
+ Olof
On 26 May 2014 12:19, Sachin Kamat sachin.ka...@linaro.org wrote:
Thanks Abhilash.
On 26 May 2014 11:24, Abhilash Kesavan a.kesa...@samsung.com wrote:
This fixes the following build errors:
/tmp/ccRbZlaA.s: Assembler messages:
/tmp/ccRbZlaA.s:69: Error: selected processor does not
On Sat, May 31, 2014 at 10:15:56AM +0530, Sachin Kamat wrote:
+ Olof
On 26 May 2014 12:19, Sachin Kamat sachin.ka...@linaro.org wrote:
Thanks Abhilash.
On 26 May 2014 11:24, Abhilash Kesavan a.kesa...@samsung.com wrote:
This fixes the following build errors:
/tmp/ccRbZlaA.s:
On Wed, May 28, 2014 at 12:14:10AM +0900, Kukjin Kim wrote:
From: Sachin Kamat sachin.ka...@linaro.org
Enable Exynos platform and its related IPs for multi_v7_defconfig.
Signed-off-by: Sachin Kamat sachin.ka...@linaro.org
Acked-by: Arnd Bergmann a...@arndb.de
Signed-off-by: Kukjin Kim
94 matches
Mail list logo